753020A ADDN ALTN CUM SPL REPAIR TO JCOs OR MD ACCN AT DIPATOLI MIL STN

SCHEDULE "A" :

Item No 01 : Complete removal of all existing roof treatment from RCC roof including old hussion felt, tiles etc and preparation of surface with bire brush and cleaning with water complete all as specified and directed.

Item No 02 : M&L for 40 mm thick PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate to roof , floor, chajja, RCC shelves etc at water retaning surfaces with WPC and make proper good slope as directed (Note-wpc will be measured and paid seprately)

Item No 03 : M&L for preparation of concrete roof surfaces and applying 20mm thick plaster in CM 1:4 on other than fair faces and finished the surface even and smooth without using extra cement complete all as specified and directed.

Item No 04 : M&L for applying a coat of bitumen primer @ 0.3L/sqm on roof surfaces complete all as specified and directed.

Item No 05 : M&L for applying 3mm thick APP modified polymeric membrane over the bitumen coat surface weight not less than 3kg/sqm and over lap 100mm and sealed by torch application as per manufacture insteructions complte all as specified and directed

Item No 06 : Supply and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner.

Item No 07 : Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

Item No 09 : M&L rendering 15 mm thick in cement mortar 1:4 on wall of brick work or concrete surface, finished fair and even including water proofing compoaund all as specified and directed.

Item No 10 : M&L rendering 10 mm thick in cement mortar 1:6 on wall of brick work or concrete surface, finished fair and even all as specified and directed.

Item No 11 : M&L rendering 5 mm thick in cement mortar 1:3 on ceiling of brick or concrete surface, finished fair and even and smooth without using extra cement all as specified and directed.

Item No 12 : M&L for preparing new plastered surfaces and applying two coats of distember oil emulsion white or tinted over 1mm thick putty after one coat of white primer complete all as specified and directed.

Item No 13 : M&L for preparing of old surfaces, washing, rubbing down and stopping of disstempered and painted surfaces and applying two coats of distember oil emulsion on wall over 1mm thick putty complete all as specified and directed.

Item No 14 : M & L Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

Item No 15 : M&L for cleaning ther old surface of all the dirt and green algae with wire brush without disturbing the old plaster and then Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and over Old surfaces.

Item No 16 : Material and labour for complete removal of existing treatment and preparation of OLD plastered surfaces of ceiling and applying two coats of white wash complete all as specified & directed.

Item No 17 : Material and labour for preparation of NEW plastered surfaces of ceiling and applying three coats of white wash complete all as specified & directed.

Item No 18 : M&L for repair and rendering 10mm thick in cm 1 :3 on chajjas, facia, roof projection, column sides, beam bottom and sides including throating after removing cracked plaster and concrete including cleaning of viisible reinforcement and treating with cement slurry also necessary repair to cracked concrete if any with cement concrete 1:2:4 Type B-0 using 12.5mm graded aggregate including necessary scafolding work for double/single storey bldgs all as directed .

Item No 19 : Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each.

Item No 20 : Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.50 Sqm & n exc 4 Sqn each.

Item No 21 : M&L Pressed steel frames of section 125 x 60 mm for doors with one or more rebates including supply and fixing lugs, hinges, lock strick plate etc complete all as specified.

Item No 22 : M&L Pressed steel frames of section 105 x 60 mm for doors with one or more rebates including supply and fixing lugs, hinges, lock strick plate etc complete all as specified.

Item No 23 : M&L PCC 1:3:6 type C-0 (using 12.5 mm greded agg) for hold fast and filling of pressed steel frame etc.

Item No 24 : S&F 2nd class hardwood factory made 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated and including door stopper for each door 01 Nos.

Item No 25 : M&L Glazed and skeleton shutters 35 mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.20 (a); for doors supplied and fitted to chowkats including door stopper for each door 01 Nos complete all as specified and directed.

Item No 26 : S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

Item No 27 : Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement, including butt hinges to fix the door complete all as specified and directed. .

Item No 28 : S & F Mild steel 300mm, ordinary rat tail rod patttern springs including roller and roller plate complete

Item No 29 : S&F Aluminium, anodised, barrel tower bolts of 200 mm long and 10mm dia stove enamelled black with bright bolt fixed complete all as specified and directed.

Item No 30 : S&F 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified

Item No 31 : Supply & fixing 125 mm Aluminium handles, cast type, anodised fixed complete all as specified.

Item No 32 : S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average with of aperture 1.18mm and fixed with tinned tack, or galvanised wire staples

Item No 33 : M&L preparation of new or previously untreated wooden surfaces of any description, not other wise described over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Item No 34 : M&L preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Item No 35 : S&F powder coated Aluminium three track sliding glazed window manufactured with approved aluminium section with three sliding shutters each shutter width one half of the length of window with the following specifiecation and making good the adjascent surfaces :- (a) Window frame of cross section 101mmx40mmx1.5mm thick. (b) Three way track for smooth slding shutters of cross sections 91.80mmx31.75mmx1.1mm thick. (c) Sliding shutter frame of cross section 40x18x1mm. (d) Aluminium glazing stip of size 18.2x16.66mm. (e) 4mm thick flat glass superior quality for two shutter. (f) IDPE rubber gasket for fixing glass. (g) Locking cleat/device as shutter 01 Nos. (h) 02 Nos sliding roller per shutters. (j) aluminium wire cloth 0.36mm stainless st

eel nominal dia of wire and average width of aperature 1.40mm for one shutter. (k) Fixing screws for frame with wall 06 per window with fancy design. (Note: Window will be measured outer to outer frame and no extra to be paid.)

Item No 36 : S&F Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weeighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

Item No 37 : M &L Figured glass, pin head 5.0mm type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

Item No 38 : S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

Item No 39 : Demolition of cement concrete in ground floors and paving exc 15cm thickness(below or above ground level) all as specified and directed.

Item No 40 : Demolition of reinforced concrete of any description and any poisition not otherwise specifically provide ( reinforcement cut to faciliatate demolition)

Item No 41 : M&L Cement concrete 1:5:10 type E-2 (using 40 mm graded aggregate as in filling around shunken areas complete all as specified and directed.

Item No 42 : M&L for 40 mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggregate with WPC as in sunken portion and making adequate slope toward spout pipe complete all as specified and as directed. NOTE: - Water Proofing Compound shall be measured and paid separately

Item No 43 : M&L for rendering 15 mm thick on concrete or brick surface in CM (1:3) mixed with WPC as per manufacturer instructions and finishes surfaces even and smooth with out using extra cement.Note - WPC will be measured and paid separtely

Item No 44 : Supply only liquid water proofing compound complete all as specified and directed.

Item No 45 : M&L for applying two coats evenly a tack coat of hot air blown bitumen of grade 85/25 @ 1.50 Kg per sqm per coat (one coat over plaster and one coat on polythene film) including cleaning of surface over polythene film complete all as specified and as directed

Item No 46 : M&L for polythene film black 200 micron thick laid in floor, vertical surface etc complete all as specified and directed.

Item No 47 : Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

Item No 48 : M&L Cement concrete 1:2:4 type B0 using 12.5mm graded agg 25 mm thick for laying of floor etc complete all as specified and directed

Item No 49 : M&L Non- skid colour ceramic tiles,7 to 8mm thick square / rectangular area of each tile exc 0.06 sqm but n exc 0.11sqm in floor over and including 15mm thick screed bed in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor complete all as specified and directed.

Item No 50 : M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick cement screed bed or bedding layer in CM 1:6 .

Item No 51 : M&L Non - Skid Coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick cement screed bed or bedding layer in CM 1:6 .

Item No 52 : M&L Non - Skid Coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in vertical etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick cement screed bed or bedding layer in CM 1:4 .

Item No 53 : M & L Glazed coloured ceramic tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in CM 1:4 .

Item No 54 : M&L Machine cut kota stone slab flooring 20-25mm thick over incl 20mm thick cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and incl screed bed of CM 1:6 complete all as specified and directed.

Item No 55 : M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and incl CM 1:4 complete all as specified and directed.

Item No 56 : M& L for Granite 16-18mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite.

Item No 57 : Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations

Item No 58 : S&F stainless steel plate rack of size 750 x 600 mm incl. shelves , rod to put plates etc made out of 0.80mm thick stainless steel sheet after taking down old one all as specified and directed .

Item No 59 : Supply and fix sinks with drainage board made of stainless steel 1 mm thick sheet for, kitchen or laboratory with plugs, washers and waste pipe; cast iron cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed by Engr-in-Charge.

Item No 60 : Taking up or down steel tubing 15mm dia and connections, including cleaning for refixing or removal to store

Item No 61 : Taking up or down steel tubing 20mm dia and connections, including cleaning for refixing or removal to store

Item No 62 : Supplying and laying of CPVC pipes 16mm dia SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified

Item No 63 : Supplying and laying of CPVC pipes 20mm dia SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified

Item No 64 : Supply & fix PVC connections of 900mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.

Item No 65 : Supply & fix in reapir angular valve with caps, 15 mm dia, cast copper alloy, chromium plated, fancy type with long shank and cup, screwed down, high pressure screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified & directed.

Item No 66 : Supply & fix in repair long body bib taps cast copper alloy chromium plated with crutch or butterfly handle and caps, screwed down, screwed for iron pipe of 15mm bore, complete all as specified & directed.

Item No 67 : M& L for 15mm s Stop valves, cast copper alloy, chromium plated concealed type screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

Item No 68 : S&F in repair Brass chromium plated shower rose 125mm size all as specified and directed

Item No 69 : S&F for 110 mm bore PVC floor traps plain and 300 mm long out let including jointing with cement concrete type B -1 1:2:4 complete all as specified & directed.

Item No 70 : Supply & fixing in repair steel C.P. grating 100/125 mm dia as reqd at site complete all as directed.

Item No 71 : Supply and fix PVC bends 110mm bore, any radius complete all as specified & directed.

Item No

摥愠摮搠物摥整dऀ฀ࠀ�ࠀ瑉浥丠ㄱ‱›⁍…⁌潣据敲整戠摥琠牤楡楰数⁳湩汣摵湩⁧慰正湩⁧湵敤Ⱳ愠摮栠湵档湩⁧条楡獮⁴桴⁥楳敤⁳景瀠灩獥愠瑦牥琠敨⁹牡⁥慬摩愠摮琠獥整⁤湩挠浥湥⁴潣据敲整ㄠ㐺㠺琠灹⁥㉄映牯㈠〰洠楤⁡楰数眠牯湩映畯潰楳楴湯.ऀ฀ࠀ뤀ࠀ瑉浥丠ㄱ′›♍⁌潦⁲㔱浭琠楨正爠湥敤楲杮漠牂捩慭潳慮祲眠污畳晲捡獥椠䵃ㄠ㐺洠硩摥眠瑩⁨慷整⁲牰潯楦杮挠浯潰湵⁤楦楮敳⁤癥湥愠摮猠潭瑯⁨楷桴甠楳杮攠瑸慲挠浥湥⁴污獡搠物捥整⹤ ऀ฀ࠀ㬀ࠀ瑉浥丠ㄱ″›畓灰祬漠汮⁹湩整牧污眠瑡牥瀠潲景湩⁧潣灭畯摮.ऀ฀ࠀ鰀ࠀ瑉浥丠ㄱ‴›⁍…⁌潦⁲牰捥獡⁴䍒⁃㨱㨲‴祴数䈠ㄭ用楳杮㈠洰牧摡摥猠潴敮愠杧敲慧整昩牯洠湡潨敬挠癯牥椠据畬楤杮瀠慬楣杮愠摮猠瑥椠䵃ㄠ㘺愠汬愠⁳灳捥晩敩⁤ ĉȈ䤀整潎ㄠ㔱㨠䴠☠䰠洠汩⁤瑳敥敤潦浲摥漠⁲睴獩整⁤慢⡲䵔⁔慢⥲〱浭搠慩愠摮挠癯牥†畣⁴潴氠湥瑧⁨敢瑮琠桳灡⁥敲摱‬湩汣‬牣湡楫杮戠湥档湩⁧灳物污祬映牯挠灯楹杮映牯挠汯浵獮栠潯楫杮攠摮⁳湡⁤敢摮湩⁧楷桴愠摮椠据畬楤杮䴠⁓楷敲愠湮慥敬⁤楷敲渠瑯氠獥⁳桴湡〠㤮洠楤⹡ øȈ䤀整潎ㄠ㘱㨠䴠䰦映牯瀠捣ㄠ㌺㘺琠灹⁥ㅃ甠楳杮㈠洰牧摡摥猠潴敮愠杧慲慧整愠⁳湩戠摥戠楲正ⱳ挠灯湩⁧瑥⁣湩汣摵湩⁧敷瑡敨楲杮猠楬桧汴⁹潲湵敤⁤牯挠慨晭牥摥愠杮敬⁳湡⁤桴潲瑡湩⁧慭楫杮朠潲癶獥映牯映硩湩⁧景洠湡栠汯⁥潣敶⁲湩汣摵湩⁧敮散獳牡⁹潦浲眠牯kऀ฀ࠀ︀ࠀ瑉浥丠ㄱ‷›硅牴⁡潦⁲潦浲湩⁧慦物映湩獩敨⁤牤楡潡⁲档湡敮〱浣椠湮牥朠物桴椠散敭瑮挠湯牣瑥⁥獵湩⁧硥牴⁡散敭瑮椠据畬楤杮映湩獩楨杮琠敨琠灯漠⁦敢据楨杮攠敶湡⁤浳潯桴甠楳杮攠瑸慲挠浥湥⁴昨牯業杮挠慨湮汥猠慨汬戠⁥敭獡牵摥愠摮瀠楡⁤潦⁲敳慰慲整祬⸩ šȈ䤀整潎ㄠ㠱㨠䐠浥汯瑩潩景爠楥普牯散⁤散敭瑮挠湯牣瑥⁥湩朠潲湵⁤汦潯獲愠摮瀠癡湩⁧潮⁴硥散摥湩⁧㔱挠桴捩湫獥⁳戨汥睯漠⁲扡癯⁥牧畯摮氠癥汥 敲湩潦捲摥.ऀ฀ࠀⴀࠁ瑉浥丠ㄱ‹›畃瑴湩⁧湩潴攠楸瑳湩⁧慭桮汯獥映牯挠湯敮瑣湩⁧敮⁷牤楡獮‬慭楫杮朠潯⁤潴瀠灩⁥湡⁤敲摮牥湩Ⱨ挠瑵楴杮漠瑵攠楸瑳湩⁧敢据楨杮映牯愠摮映牯業杮戠慲据⁨档湡敮ㄨ㈯爠畯摮漠⁲⼳‴敳瑣潩⥮椠散敭瑮挠湯牣瑥⁥㨱㨲‴祴数䈠ㄭ猠潭瑯⁨楦楮桳摥‬湡⁤敲潦浲湩⁧敢据楨杮愠⁳敲畱物摥映牯ㄠ〵浭㈯〰浭瀠灩eऀ฀ࠀ혀ࠀ瑉浥丠㈱‰›⁍…⁌䍒⁃祴数䈠ㄭㄠ㈺㐺甠楳杮㈠‰浭朠慲敤⁤条⁧獡椠汳扡⁳畳灰牯整⁤湯眠污獬愠⁳湩猠慯敷汬猯灥楴⁣慴歮攠捴挠浯汰瑥⁥ 潣瑳椠楳畴 湩汣摵湩⁧獡瀠牥爠煥極敲敭瑮漠⁦潦浲眠牯湡⁤敤潭楬楴湯漠⁦䍒⹃ ½Ȉ䤀整潎ㄠㄲ㨠䐠浥汯瑩潩景倠䍃漠⁦湡⁹敤捳楲瑰潩湡⁤湩愠祮瀠獯瑩潩潮⁴瑯敨睲獩⁥灳捥晩捩污祬瀠潲楶敤⁤潦⁲牤楡瑥⁣湩汣摵湩⁧敲潭楶杮琠敨猠浡⁥桷牥⁥楤敲瑣摥挠浯汰瑥⁥污獡搠物捥整⹤ ǖȈ䤀整潎ㄠ㘲㨠吠歡湩⁧潤湷挠灯数⁲愯畬業楮浵瀠楯瑮眠物湩⁧氨杩瑨‬慦Ɱ戠汥ⱬ潳正瑥†牯瀠睯牥 潣灭敬整椠据畬楤杮映硩畴敲愠摮映瑩楴杮⁳畳档愠⁳睳瑩档獥Ⱐ挠楥楬杮爠獯獥Ⱐ瀠湥敤瑮Ⱐ爠来汵瑡牯ⱳ猠捯敫獴‬楬桧⁴楦瑴湩⁧瑥⹣†敒潭楶杮洠瑡牥慩獬琠瑳牯⁥潦⁲敫灥湩⁧湩猠晡⁥畣瑳摯⁹牯映牯琠歡湩⁧牣摥瑩⠠牣摥瑩愠映牯愠潢敶椠整獭猠潨汵⁤敢洠摡⁥獡瀠牥挠湯楤楴湯猠灥牥瑡汥⥹愠摮洠歡湩⁧潧摯搠獩牴扵摥猠牵慦散⁳景†慷汬ⱳ映潬牯⁳瑥⁣潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥愠⁴楳整.ऀ฀ࠀሀࠁ瑉浥丠㈱‷›慔楫杮搠睯汯⽤湵敳癲捩慥汢⁥楤瑳楲畢楴湯戠慯摲戠⁹楤捳湯敮瑣潩景攠敬瑣楲⁣潣湮捥楴湯挠牡晥汵祬匠乐䐠獂启乐䐠獂 慍湩匠楷捴⁨湩汣摵湩⁧汯⁤湵敳癲捩慥汢⁥䍍䉃⽳䴠䉃ⱳ䤠潳慬潴獲‬瑥⁣湡⁤慭楫杮朠潯⁤潴搠獩畴扲摥猠牵慦散挠浯汰瑥⁥污獡猠数楣楦摥愠摮搠物捥整⹤ čȈ䤀整潎ㄠ㠲㨠吠歡湩⁧潤湷挠牡晥汵祬挠灯数⽲污浵湩畩畓⁢慭湩眠物湩⁧景愠祮猠穩⁥牦浯†畳晲捡⽥潣据慥敬⁤支楸瑳湩⁧潣摮極⁴景愠祮栠楥桧⁴湡⁤敲潭楶杮洠瑡牥慩獬愠⁴楳整愠摮洠歡湩⁧潧摯搠獩畴扲摥猠牵慦散⁳景眠污獬‬汦潯獲爠潯獦攠捴挠浯汰瑥⁥污獡猠数楣楦摥愠摮搠物捥整⹤ úȈ䤀整潎ㄠ㤲㨠吠歡湩⁧潤湷挠楥楬杮映湡⼠硥慨獵⁴慦景愠祮猠敷灥愠瑦牥搠獩潣湮捥楴杮愠汬渠捥獥慳祲攠敬瑣楲慣潣湮捥楴湯⁳牦浯挠楥楬杮爠獯⁥潴映湡‬慦汢摡獥挠浯汰瑥⁥污獡猠数楣楦摥愠摮愠⁳楤敲瑣摥愠摮搠灥獯瑩琠䕍⁓瑳牯⁥慹摲漠⁦䝁⁅⽅⁍楄慰潴楬 ऀ฀ࠀ豈ࠂ瑉浥丠㌱‰›♍⁌潦⁲潰湩⁴楷楲杮眠瑩⁨⸱‵煓洠猠湩汧⁥潣敲†噐⁃湩畳慬整⁤†湵桳慥桴摥†潣灰牥䘠䱒䡓洠汵楴猠牴湡敤⁤潣摮捵潴⁲慣汢⁥湩愠摮†湩汣摵湩⁧䌠湯散污摥倠䍖挠湯畤瑩†景猠穩⁥〲㈯洵卉⁉洠牡敫⁤湩汣獵癩⁥景†整獥Ⱐ敢摮Ⱐ汥潢獷攠捴甠瑰湡⁤湩汣摵湩⁧畳歮椠湡摯穩摥瀠敲獳摥猠整汥戠硯映牯栠畯楳杮猠楷捴⁨潳正瑥攠捴眠瑩⁨眠楨整氠浡湩瑡摥㌠洠桴捩票慬桳敥⁴潣敶⁲卉⁉慭歲摥漠⁦畳瑩扡敬猠穩⁥潣灭敬整椠据畬楤杮倠䍖椠獮汵瑡摥洠汵楴猠牴湡敤⁤挠灯数⁲潣摮捵潴⁲⸱‵匠ⁱ浭䘠䱒䡓挠扡敬愠⁳慥瑲⁨楷敲琠潣浭湯攠牡桴搠汯祬映牯挠湯敮瑣潩潴挠楥楬杮爠獯⁥潴攠牡桴琠牥業慮椠据畬楤杮†畣瑴湩Ⱨ挠慨獳獥愠摮洠歡湩⁧朠潯⁤搠獩畴扲摥猠牵慦散琠慭捴⁨楷桴攠楸瑳湩⁧楦楮桳眠瑩⁨汰獡整⁲潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥戠⁹湅牧椭⵮档牡敧映牯映汯潬楷杮㨠-ऀ฀ࠀ谀ࠁ瑉浥丠㌱‱›敄捳楲瑰潩污獡瀠牥椠整潎ㄠ〳栠牥⁥湩戠晥牯⁥畢⁴甠楳杮㈠㔮猠ⁱ浭猠湩汧⁥潣敲挠灯数⁲潣摮捵潴⁲慣汢⁥景洠汵楴瑳慲摮摥䘠䱒䡓‬噐⁃湩畳慬整⁤湵桳慥桴摥ㄠ〱‰潶瑬⁳牧摡⁥潦⁲⼵㔱愠灭⁳睳瑩档猠捯敫⁴潣浢湩瑡潩潰湩⁴湩汣摵湩⁧敮散獳牡⁹畲湮湩⁧景†⸲‵煳洠潣灰牥挠湯畤瑣牯䘠䱒䡓‬噐⁃楷敲愠⁳慥瑲⁨潣瑮湩極祴挠湯畤瑣牯愠潬杮眠瑩⁨楷楲杮愠摮挠湯敮瑣湩⁧潴琠敨挠浯潭慥瑲⁨潤汬⹹ ˜Ȉ䤀整潎ㄠ㈳㨠匠☠䘠映牯洠摯汵牡匠楷捴⁨汦獵⁨祴数猠湩汧⁥潰敬㔠㘯愠灭‬睴慷⁹楳杮敬洠摯汵⁥㈠〳嘠汯獴挠浯汰瑥⁥污獡猠数楣楦摥愠摮搠物捥整⁤瑡猠瑩⹥ ऀ฀ࠀ頀ࠀ瑉浥丠㌱″›⁓…⁆潦⁲潭畤慬⁲睓瑩档映畬桳琠灹⁥楳杮敬瀠汯⁥⼵‶浡Ɒ漠敮眠祡猠湩汧⁥潭畤敬†㌲‰潖瑬⁳潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥愠⁴楳整‮ ƒȈ䤀整潎ㄠ㐳㨠匠☠䘠映牯洠摯汵牡匠楷捴⁨汦獵⁨祴数猠湩汧⁥潰敬ㄠ⼵㘱愠灭‬㌲‰潖瑬⁳潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥愠⁴楳整‮ ƒȈ䤀整潎ㄠ㔳㨠匠☠䘠映牯洠摯汵牡猠捯敫⁴畯汴瑥㈠㌯瀠湩‬⼵‶流⁰㈨洠摯汵⥥㈠〳嘠汯獴挠浯汰瑥⁥污獡猠数楣楦摥愠摮搠物捥整⁤瑡猠瑩⹥  Ȉ䤀整潎ㄠ㘳㨠匠☠䘠映牯洠摯汵牡猠捯敫⁴畯汴瑥㈠㌯瀠湩‬㘰ㄯ‶流⁰㈨洠摯汵⥥㈠〳嘠汯獴挠浯汰瑥⁥污獡猠数楣楦摥愠摮搠物捥整⁤瑡猠瑩⹥ xȈ䤀整潎ㄠ㜳㨠匠☠䘠映牯洠摯汵牡戠汥異桳㘠䄠灭‬楳杮敬洠摯汵⁥㌲‰潖瑬⁳潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥愠⁴楳整.ऀ฀ࠀ萀ࠀ瑉浥丠㌱‸›⁓…⁆潦⁲敃汩湩⁧潲敳‬畳晲捡⁥慂敫楬整眠瑩⁨″整浲湩污⁳噐⁃卉⁉洠牡敫⁤潦⁲慢瑴湥映瑩楴杮挠浯汰瑥⁥污獡猠数楣楦摥 “Ȉ䤀整潎ㄠ㤳㨠匠☠䘠†潦⁲敂汬䔠敬瑣楲⁣楄杮搠湯⁧祴数猠極慴汢⁥潦⁲灯牥瑡潩湯㈠〳瘠汯⁴〵䠠⁚⁁⁃畳灰祬挠浯汰瑥⁥污獡猠数楣楦摥愠摮愠⁳楤敲瑣摥 ŸȈ䤀整潎ㄠ〴㨠匠☠䘠†潦⁲慬灭栠汯敤⁲‬噐⁃ 潐祬慣扲湯瑡⁥祴数眠瑩⁨†慢正瀠慬整猠極慴汢映牯戠瑡整⽮猠慬瑮湩⁧楦瑴湩獧挠浯汰瑥⁥污獡猠数楣楦摥愠摮搠物捥整⹤ kȈ䤀整潎ㄠㄴ㨠匠☠䘠洠摯汵牡挠癯牥瀠慬整眠瑩⁨牦浡⁥景猠穩⁥′潭畤敬挠浯汰瑥⁥污獡猠数楣楦摥愠摮搠物捥整⹤ kȈ䤀整潎ㄠ㈴㨠匠☠䘠洠摯汵牡挠癯牥瀠慬整眠瑩⁨牦浡⁥景猠穩⁥″潭畤敬挠浯汰瑥⁥污獡猠数楣楦摥愠摮搠物捥整⹤ kȈ䤀整潎ㄠ㌴㨠匠☠䘠洠摯汵牡挠癯牥瀠慬整眠瑩⁨牦浡⁥景猠穩⁥‴潭畤敬挠浯汰瑥⁥污獡猠数楣楦摥愠摮搠物捥整⹤ kȈ䤀整潎ㄠ㐴㨠匠☠䘠洠摯汵牡挠癯牥瀠慬整眠瑩⁨牦浡⁥景猠穩⁥‶潭畤敬挠浯汰瑥⁥污獡猠数楣楦摥愠摮搠物捥整⹤ dȈ䤀整潎ㄠ㔴㨠匠☠䘠洠摯汵牡洠瑥污映畬桳戠硯漠⁦楳敺㈠洠摯汵⁥潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥.ऀ฀ࠀ搀ࠀ瑉浥丠㐱‶›⁓…⁆潭畤慬⁲敭慴汦獵⁨潢⁸景猠穩⁥″潭畤敬挠浯汰瑥⁥污獡猠数楣楦摥愠摮搠物捥整⹤ dȈ䤀整潎ㄠ㜴㨠匠☠䘠洠摯汵牡洠瑥污映畬桳戠硯漠⁦楳敺㐠洠摯汵⁥潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥.ऀ฀ࠀ搀ࠀ瑉浥丠㐱‸›⁓…⁆潭畤慬⁲敭慴汦獵⁨潢⁸景猠穩⁥‶潭畤敬挠浯汰瑥⁥污獡猠数楣楦摥愠摮搠物捥整⹤ JȈ䤀整潎ㄠ㤴㨠匠☠䘠戠慬歮湩⁧汰瑡⁥潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥.ऀ฀ࠀ뜀ࠁ瑉浥丠㔱‰›⁓…⁆潦⁲桳敥⁴敭慴湥汣獯牵⁥䍍⁂䐠⁂吠乐†‴慷⁹敖瑲捩污琠灹⁥楷桴㈠〰䄠灭⁳慲整⁤畢⁳慢⁲ㄴ‵潶瑬⁳潤扵敬搠潯⁲楷桴洠条楮楴⁣潬正湩⁧祳瑳浥猠極慴汢⁥潦⁲牰癯獩潩景椠据浯湩⁧獡㐠⁐䍍⁂湡⁤畯杴楯杮䴠䉃⁳湩汣摵湩⁧敮散獳牡⁹牰癯獩潩潦⁲湩敳瑲湩⁧桴⁥䉄⁳湩眠污祢挠瑵楴杮琠敨戠楲正猯潴敮洠獡湯牡⁹瑥⁣湡⁤慭楫杮朠潯⁤景搠獩牴扵摥猠牵慦散琠慭捴⁨楷桴攠楸瑳湩⁧潣潬牵漠⁦慷汬挠浯汰瑥⁥污獡猠数楣楦摥愠摮愠⁳楤敲瑣摥.ऀ฀ࠀꘀࠀ瑉浥丠㔱‱›⁓…⁆映牯†䍍⁂牴灩汰⁥潰敬愠摮渠略牴污爠瑡摥挠灡捡瑩⁹㌶䄠灭ⱳ㐠㔱嘠汯獴戠敲歡湩⁧慣慰楣祴ㄠ‰䅋‬䌧‧畣癲⁥潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤獡搠物捥整⹤ ʂЈ䤀整潎ㄠ㈵㨠䴠☠䰠映牯†畓⁢慭湩眠物湩⁧楷桴愠灰潲敶⁤潣潬牵挠摯湩⁧獡瀠牥䤠⁓楷桴琠潷猠湩汧⁥潣敲倠䍖椠獮汵瑡摥䘠䱒⁓慣汢⁥楷桴猠牴湡敤⁤潣灰牥挠湯畤瑣牯漠⁦楳敺㘠匠ⁱ浭渠浯湩污愠敲⁡湡⁤牤睡湩⁧湩潴猠極慴汢⁥楳敺漠⁦噐⁃潮敭慴汬捩爠杩摩栠慥祶搠瑵⁹噐⁃潣摮極⁴景眠楨整 癩牯⁹

olour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit  j
Item No 153 : S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. ¤Item No 154 : S & F for MCB Single pole and neutral rated capacity 40 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. Item No 155 : S & F for MCB Single pole rated capacity 6 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. ‹
Item No 156 : S&F water heater 25 litre capacity BEE star rating 5, vertical pattern in approved colour, heating element 2.0 KW, adjustable temperature setting knob for temperature settings between 250C to 750C, outer tank made of pre coated metal, inner tank made of extra thick superior cold rolled steel with marine grade glass line coating provided with high density PUF insulation complete. È ÉÐ Ñ%
Item No 157 : Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed. –Item No 158 : S & F for Highly efficient LED Bulbs, 9 W, used as a ready replacement for existing old unsv bulb complete all as specified and directed ‘Item No 159 : S & F for LED mirror light 10 watts batten aluminium extruded with decorative end caps complete all as specified and as directed. q
Item No 160 : S & F for Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired with warranty option of 5 years from date of installation and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. 0Item No 161 : S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. $Item No 162 : S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed. 5Item No 163 : S & F for energy efficient exhaust fan of 300 mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base compelte all as specified and directed. (Note : Cost of suitable opening wall for fixing exhaust fan is deemed to be included in overall rate quoted). ¨Item No 164 : Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm s
Item No 165 : Supply,laying,jointing,testing and commissioning XLPE insulated, armoured,heavy duty, LT UG cable with aluminium conductor, 1100 volts grade cross sectional area 35 sqmm 3.5 core connected with aluminium lugs connected by cramping tools complete all as specified and directed. Note:- Excavation and earth work will be measured and paid separately. óItem No 166 : Supply and providing sand cushioning with dry clean sand 15 cm below cable and 8 cm above the cable complete all as specified and directed by Engr-in-charge. Note : Punned thickness shall be measured for the purpose of payments. ÅItem No 167 : Supply and laying burnt bricks old size sub class-B laid in trenches for cable protection with length of brick perpendicular to length of cable complete all as specified and directed. ÅItem No 168 : Supply and fix in replacement of 50 mm bore GI pipe light grade fixed on pole /trenches/wall/road crossing etc complete with clamp nut bolt etc all as specified and directed at site. žItem No 169 : M &L for GI Earthing complete with GI earth plate electrode 60cm x 60cm x6 mm buried directly in ground verticvally to size of earth pit not less than 0.90x 0.90 x 2.25 mtr below ground level with top edge of the plate at a depth not less than 1.5 mtr below ground level, earth plate connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part - I filling with charcoal dust , and common salt , including necessary excavation and earth work in any type of soil ,perforated watering pipe of size 15 mm dia,funnel with wire mesh, PCC chamber 1:3:6 type C1 (for even finish on both the faces) and RCC cover 1:2:4 Type B1,450 x450 x50 mm thick with 6 mm dia CTD bars 150 mm c/c with 2 Nos of handles of 10 mm dia steel rod all as specified and directed and testing on completion and connected to equipment with lugs and screw nuts etc all as specified and directed by EIC Note : (i) 7.5 RM GI earth wire deemed to be included in quoted rates beyond 7.5 RM wire shall be measured and paid separately. (ii) Earth resistance of earth pit should be not more than 02 Ohms on testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost. (iii) Rate quoted by the tenderer is deemed to included salt & Charcoal upto & above 450 mm (Min) top of GI Plate.  Item No 170 : S&F in replacement sheet moulded compound (SMC) meter box fire retardant type of size not less than 600x500x150 mm to enclose 04 single phase electric meters with hinge type front operated door having transparent acrylic sheet & proper locking arrangement and flush mounting in wall incl taking down & refixing of serviceable elctric meter & making electric connections including cleaning of disturbed area and making good the disturbed surface and matching the existing specification complete all as directed. ÁItem No 171 : M&L for drilling and tapping cast iron water mains in position for branch connections of following internal dia 15 to 20 MM dia bore size complete all as specified and directed.. {Item No 172 : Taking down steel tubing with all connections of size 20 MM dia bore complete all as specified and directed. vItem No 173 : All as per item No 172 here-in-before but of size 25 mm dia bore complete all as specified and directed. vItem No 174 : All as per item No 172 here-in-before but of size 40 mm dia bore complete all as specified and directed. vItem No 175 : All as per item No 172 here-in-before but of size 50 mm dia bore complete all as specified and directed. ÷Item No 176

: Supply & Fixing in repair G.I tubes med grade Galvanized with necessary fittings and clamps as per SSR Part -1 laid in trenches /wall/floors concealed or open execution of size 20 mm dia bore complete all as specified and directed. vItem No 177 : All as per item No 176 here-in-before but of size 25 mm dia bore complete all as specified and directed. vItem No 178 : All as per item No 176 here-in-before but of size 40 mm dia bore complete all as specified and directed. vItem No 179 : All as per item No 176 here-in-before but of size 50 mm dia bore complete all as specified and directed. ûItem No 180 : S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends with union,long screw with check nut for iron pipe incl taking down existing gate valve of size 20 MM dia bore complete all as specified and directed. vItem No 181 : All as per item No 180 here-in-before but of size 25 mm dia bore complete all as specified and directed. vItem No 182 : All as per item No 181 here-in-before but of size 40 mm dia bore complete all as specified and directed. vItem No 183 : All as per item No 181 here-in-before but of size 50 mm dia bore complete all as specified and directed. ËItem No 184 : S&F in repair bib taps cast copper alloy with crutch or butter fly handle screwed down, screwed for iron pipe as per SSR Part -1 of size 15 mm bore complete all as specified and directed. ÂItem No 185 : M & L for cutting existing CI water mains in position for insertion of tee, branch line etc to new water connection of size 100 mm dia bore complete all as specified and directed sItem No 186 : All as per item No 185 here-in-before but in 150 mm dia bore complete all as specified and directed ïItem No 187 : Taking up cast iron water mains including all fittings with spigot and socket ends and lead joint including burning out lead joint and recovering lead of CI pipe of size 100 MM dia bore complete all as specified and directed. wItem No 188 : All as per item No 187 here-in-before but of size 150 mm dia bore complete all as specified and directed. ‹Item No 189 : Material and labour in repair for run lead joints of CI pipes of size 100 MM dia bore complete all as specified and directed. wItem No 190 : All as per item No 189 here-in-before but of size 150 mm dia bore complete all as specified and directed. ÔItem No 191 : S&F DI Fittings as per IS-9525 in all types and sizes and in form of mechanical joints, bends, tees, all types of flanges, socket and spigot, collars caps etc complete all as specified and directed. Ò
Item No 192 : Supply, laying and jointing of DI pressure pipes with spigot and socket lining in inner side as per IS:8329/2000 (latest revision) and other relevant standards and mettalic zinc/epoxy coating on outer side, suitable for push on joint (rubber gasket joint) including rubber gasket, in any length laid in trenches/ over masonry pillar and connection to old or new position of Class "K-7" of size 100 mm dia bore complete all as specified and as directed wItem No 193 : All as per item No 192 here-in-before but of size 150 mm dia bore complete all as specified and directed. §SCHEDULE "A" (Schedule of credit ) Schedule of Credit Rs 883748.00 (Minus) inserted by the MES. (Note : Credit amount shall be deducted manually to arrive net amount)

SSEWAGE DISPOSAL

ROAD PATH CULVERT

Item No 122 : Surface excavation n.exc(not exceeding) 30Cm deep and averaging 15 Cm deep and getting out in soft loose soil

Item No 123 : S&F 60 mm thick Machine pressed precast concrete coloured interlocking paver block any shape and size confirming to IS 15658-2006 , M-35 Grade with grey cement and no pigment complete all as specified and directed.

Item No 124 : M/L 100 mm thick cement concrete 1:4:8 type D-2 using (40 mm graded stone agg) as in sub base complete all as specified and directed.

Item No 125 : M&L supply and laying of sand including spreading, levelling and ramming in layers n.exc. 50 Mm thick in each layer complete all as directed

INTERNAL ELECTRIFICATION

(a) One light point controlled by one, one way switch 5 Amps

(b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

(c) One light point controlled by one, two way switch 5 Amps

(d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board.

(e) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

(f) One bell point controlled by one, bell switch 5 Amps

EXTERNAL WATER SUPPLY