8595 SPL REPAIR TO SUNKEN FLOORS OF 24 TOILET BLOCKS OF OLD BOYS HOSTEL AT AFMC UNDER GE (CENTRAL) PUNE

Amount

Dismantling of stone slab or tiles in any description or thickness, laid bedded jointed in any morter.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Demolition of cement concrete in ground floors and paving not exc 15cm thick (below or above ground level) un-reinforced.

M&L for Clean the sunken portion of toilet/Bath/WC/Kitchen throughly to remove laitance, dirt, dust, etc. and including forming angle fillet of size 40 mm x 40 mm along the junction of wall and floor using polymer modified mortar ("Dr Fixit" Pidicrete URP" or eqvt)

M&L for Sanitary pipes entering through walls and floor shall be sealed with "Dr Fixit Bathseal Tape" and the gaps to be grouted with non-shrink cementitous grout "Dr Fixit Bathseal Grout" or eqvt. Nahani traps, etc to be fitted securely and the gaps around it to be grouted in the same manner.

M&L for Applying acrylic cementitious polymer modified elastrometric waterproofing and protective coating like 'Brushbond' of Fosroc or 'Pidifin 2K' of Pidilite or equivalant in Dr. Fixit on sunken floor as per manufacturer's instructions including 15 mm thick rendering on fair faces of concrete surfaces in cement mortar 1:4 mixed with water proofing compound / liquid, complete all as specified and as directed. NOTE: (a) Water proofing compound /liquid shall be measured and paid at supply only rates seperately. (b) After completion waterproofing coating suncken floor filled with water for 7 days for testing all as directed by Egr-In-Charge

M&L for concrete screed M 15 type B0 (1:1.5:3) mixed with intergral WPC (Liquid) laid to slope 1:60 towards outer face of wall. water proofing compound @ 200ml per bag of cement 50 mm thick.

M&L for P C C 1:5:10 type E2 (using 40mm graded stone aggregade as in filling under floor.

M&L for colored Joint Free Non Skid ceramic tiles or matt finish tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or colored cement to match, including 15 mm thick screed bed or bedded layer in cement mortar 1:6 for laying floor finish.

M&L for glazed ceramic coloured, designer & pattern (dark & light shade combination) tiles in 450 x 300 x 7-8 mm thick on vertical surfaces such as dado etc set and jointed in neat cement slurry and pointed in white or colour cement to match over with and including 10mm thick backing coat in CM 1:4 and filleting complete all as specified and directed.

M&L for telephonic black 18mm to 20mm thick Granite work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platfoms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base 15 mm thick in c.m 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab ncluding rubbing and polishing complete

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations

Taking down cement plaster on stone / Brick walls including raking out joints, hacking for key, scrubbing down with water all as specified

M&L for rendering 15mm thick plaster on fair faces of brick work or concrete surfaces (1:6) finished the surface even and Smooth without extra cement.

M&L for applying two coats of oil bound distemper over a coat alkali resistent primer to newly plastered surfaces of walls including preparation of surfaces.

Taking down Chowkats or frames with shutters (w/o taking of shutters from the frame) area n. exc 1.5 Sqm removing from site

Taking down shutter of any description and removing frome site exc. 1 Sqm & n. exc. 2 Sqm each leaf.

S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing

S&F Factory made solid panel door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S&F 100 mm long SS hinges all as spefied and directed.

S&F 150 mm long Aluminium anodised barrel tower bolt of extruded section.

Supply and fix 150mm long Extruded aluminium alloy handles, 150mm long fabricated type., anodised

S&F 300 mm long Aluminium alloy anodised sliding door bolt with hasp staple (bolt type ) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy.

M and L for applying two coat of synthetic enamel painting to wooden surfaces over a coat of pink primer incl preparation of wooden surface, Surfaces of any description, not otherwise descri-bed, over 10cm width or girth

S&F, Powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

Supply & fix in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white with P or S trap with and including plastic water closet seat cover, jet spray , connection to trap, flushing pipe & anti -syphonage pipe and 10 litrs flush tank etc including necessary materials for fittings & making good to floor complete all as specified and directed.

S&F oval shaped vitreous china , under/over counter WHB, snow white, fancy type of overall size 560 x 470 mm fixed in repairs including 15 mm pillar cock cast copper alloy CP, CP fancy type 15mm bore cast copper stop valve/ange cock, 32 mm brass CP waste fitting & waste pipe & 15 mm PVC connection pipe 450 mm long.

Supply and fix in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) fixed including 15mm bore CP, Brass, urinal spreder

S&F stop cock / angle cock copper alloy CP screwed down high pressure with crutch or butterfly handle screwed both ends for iron/pipe or for union and fixed 15 mm bore in repairs

S&F 15mm bore, CP, bib taps cast copper alloy with crutch or butterfly handle, chromium plated fancy type screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs

S&F in repairs CP Health faucet spray with 1.5m long pipe with wall hook & fixed in repair complete

Supply and fix in repairs Bib taps two way type , cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule 15 mm bore and fixed and CP Health faucet spray with 1.5m long pipe with wall hook

Supply and fix swan neck , 15mm bore piller taps of cast copper with capstan head CP screwed down high pressure with or without lettered hot and cold with long screwed shank and fly nut for iron pipe and fixed in repairs

S&F in repairs Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed

Supply and fix in repairs brass Chromium plated shower roses 125mm size with or without swivel joints, any size, including fixing to steel pipe or union

S&F PVC connections 15 mm size with PTMT nuts to length 450 mm in repairs.

S&F Brass, Chromium plated, Tubular towel rail, 20mm dia, D type, 60cm long between flanges

Taking down steel tubing/CPVC/UPVC pipes and connections including cleaning for re-fixing or removal to store of 15 mm bore

Supplying and laying 15mm bore of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all required fittings complete all as specified incl cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth on brick/Stone masonary surfaces

Taking down steel tubing necessary fittings connection etc for 20 mm bore pipe

S&F 20mm dia, UPVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc, any type of pipe

Supply and fix PVC (SWR) floor trap/Nahani trap, plain with grating including jointing with solvent cement 75 mm dia out let including taking down of old trap & making good the disturbed surface with PCC 1:2:4 or CM (1:3) and SS Grating of any type.

M&L for Complete removal of existing treatment of wall surfaces and Ceiling applying two coats of oil bond distemper over one or two coats of putty including one coat of primer all as specified & directed by Engineer-in- Charge.

Complete reomval of existing treatment and Finishing walls with Acrylic Smooth exterior paint of required hade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Dismantling Water Tanks & removing from site, capacity of tanks 500 ltr and n exc 1000 ltr

S&F Rotational moulded polyethelene water storage tanks (cylindrical, vertical with closed top) hoisted & fixed in position all as specified in SSR Pt-I, exc 1000 ltr capacity including 20mm dia PTMT Float valve as specified.

S&F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110 mm dia including holding brackets etc.

S&F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 75 mm dia including holding brackets etc.

S&F PVC (SWR) bends with access door of 110 mm dia, any radius

S&F PVC(SWR) bends with access door of 75 mm dia, any radius

S&F PVC SWR Branch piece double (double 'Y') equal or unequal 110mm dia with door access.

S&F PVC SWR Branch piece double (double 'Y') equal or unequal 75mm dia with door access.

S&F PVC (SWR) junction single, (Single T) equal or unequa 75mm dia with door access

S&F PVC (SWR) junction single, (Single T) equal or unequa 110mm dia with door access

S&F high density 40mm bore polythylene pipes (HDPE) of pressure rating 6 kg/cm2 fixed complete to wall or in floors with necessary socket, elbo & bend etc complete fixed to wall or in floors etc all as complete and directed.

S&F PVC (SWR) bends of 110 mm dia, any radius

S&F PVC (SWR) bends of 75mm dia, any radius

(PVC (SWR) vent cowl, 100 mm dia

PRANAV ENTERPRISES (BID ID -3302432)

M/s Omkar Associates (BID ID -3302974)

Parhar Enterprise (BID ID -3303350)

Suma Construction (BID ID -3308611)

M/s Asrani and sons (BID ID -3303665)

Gauri Associates (BID ID -3303702)

M/s.BAJRANG CONSTRUCTION (BID ID -3303263)

UNIQUE ENGINEERS (BID ID -3309043)