Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48.4 LAccepted-AOC | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹49.7 L+₹1.3 L (2.65%)Rejected-Finance | L2 | Rejected-Finance Rejected being L2 | |
| 3 | L3₹50.2 L+₹1.8 L (3.78%)Rejected-Finance NAV PUKHARI ROAD MILLAN PALLY PO DIST TINSUKIA ASSAM 786 125 | TINSUKIA | DIBRUGARH | ASSAM | 786125 | L3 | Rejected-Finance Rejected being L3 | |
| 4 | L4₹50.3 L+₹1.8 L (3.82%)Rejected-Finance A T ROAD CHABUA DIBRUGARH ASSAM 786184 | DIBRUGARH | ASSAM | 786184 | L4 | Rejected-Finance Rejected being L4 | |
| 5 | L5₹50.5 L+₹2.1 L (4.38%)Rejected-Finance C O SREE SUMANGAL A T ROAD TINSUKIA ASSAM 786125 | TINSUKIA | DIBRUGARH | ASSAM | 786125 | L5 | Rejected-Finance Rejected being L5 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
22 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(AF) CHABUA
Office of GE (AF) CHABUA,PIN-786102
As per BOQ
2024_MES_661357_1
589/E8
Open Tender
Civil Works
Item Rate
270 days
GE(AF) CHABUA
AS per tender document
8 documents required · 8 mandatory
₹500
GE(AF) CHABUA
₹90,000
Yes
12 Sept 2024
22 Jun 2024
24 Jul 2024
22 Jun 2024
22 Jul 2024
15 Jul 2024
Amount
Taking down chowkat with shutters of any description without taking off shutters from frame area n. exc 1.50 Sqm complete all as specified and as directed.
Taking down chowkat with shutters of any description without taking off shutters from frame area exc 1.50 Sqm but not exc 4.00 sqm complete all as specified and as directed.
Taking down shutter of any description area n exc 1.00 Sqm each complete all as specified and as directed.
Taking down shutter of any description area exc 1.00 Sqm but n.exc 2.0 Sqm each complete all as specified and as directed.
S&F second class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed.
S&F 125mmX60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed.
S&F 105mmX60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed.
M&L for plain cement concrete type B-0 (1:2:4) 12.50mm graded aggregate in as in filling of press steel Chowkats complete all as specified and as directed.
M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.
S&F 35mm thick, IInd class hard wood, plain framed, paneled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F 35mm thick Glazed skeleton door shutters, open rebated and prepared to receive glass, Gauze etc (with out sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc, size of members of shutters as specified in SSR Part-I Section 8, clause.8.24 (a), using IInd Class Hard wood complete all as specified and as directed.
S&F 30mm thick Flush shutters, Solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and as directed.
S&F 30mm thick Glazed skeleton shutters for window, ventilator etc are provided with stiles and rails, open rebated and prepared to receive glass, Gauze etc (with out sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc, size of members of shutters as specified in SSR Part-I Section 8, clause.8.24 (a), using IInd Class Hard wood complete all as specified and as directed.
S&F 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze,etc(with sash bars),divided in to squares, with plain, chamfered or rounded, and rebated sash bars, any numbers for securing glass etc for windows, ventilators are provided with stiles and rails as specified in SSR part I section 8 clause 8.24 (a) using IInd Class Hard wood complete all as specified and as directed.
Refixing of shutters in same opening any description area n exc 1.00 Sqm each complete all as specified and as directed.
Refixing of shutters in same opening any description area exc 1.00 Sqm but n.exc 2.0 Sqm each complete all as specified and as directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube in opening, complete all as specified and as directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for styles and plain colour PVC sheet for top rail, lock rail & bottom rail on either sides and as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading, and joint together with solvent cement, complete all as specified and as directed.
S&F 18/19 mm thick pre-laminated particle board interior grade one side with decorative choice laminations and other side balancing white lamination fixed in cup board shutter complete all as specified and as directed.
S&F in repairs 18/19 mm thick pre-laminated particle board interior grade one side with decorative choice laminations and other side balancing white lamination fixed in cup board shelves, partitions, wall panelling and similar items including dismantling complete all as specified and as directed.
S&F in repair's 18 mm thick celuka PVC ply of grade 1 quality of both side prelam fixed with screws, solvent cement /adhesive to make cupboard shutter side to and bottom, shelves inside the cabinet and shutters or drawers, complete all as specified and as directed.
S&F in repair's factory made PVC shelf /Partition of required size consisting of panels of 18mm (+/- 0.7) thick Celuka PVC ply and for supporting the hold of Shelf/Partitions and shall provided 3 edges of 18mm x 18mm as per required length. The front side of the edge visible in the front the shelf/partition to be edge liping by 18 mm wide x 1mm thick PVC sheet of density 600 Kg/Cum Manufactured by an ISO-9001-2015 certified company, using solvent cement etc, complete all as specified and as directed.
S&F 150mm long anodized aluminium handles, cast type, complete all as specified and as directed.
S&F 100mm long anodized aluminium handles, cast type, complete all as specified and as directed.
S&F 200 mm long anodized aluminium barrel tower bolt of extruded section complete all as specified and as directed.
S&F 100mm long anodized aluminium barrel tower bolt of extruded section, complete all as specified and as directed.
S&F Hasp and staple for 75 mm of aluminium anodized complete all as specified and as directed.
S&F 300mm long aluminium anodized sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.
S&F butt hinges, 100 mm extruded aluminium alloy with galvanized mild steel hinge pin, anodized and fixed type B-21 complete all as specified and as directed.
S&F butt hinges, 75 mm extruded aluminium alloy with galvanized mild steel hinge pin, anodized and fixed type C-21 complete all as specified and as directed.
S&F stainless steel butt hinges 100mm size medium weight, complete all as specified and as directed.
S&F stainless steel butt hinges 75mm size medium weight, complete all as specified and as directed.
S&F continuous (Piano) hinges, mild steel bright finished or electro galvanized with flap size 30mm complete all as specified and as directed.
S&F 300mm MS ordinary rat tail spring (Helical door spring) including roller and roller plate complete all as specified and as directed.
S&F in repairs 300mm MS ordinary rat tail spring (Helical door spring) including roller and roller plate complete all as specified and as directed.
S&F, Aluminium(Die cast)body Door closer hydraulically regulated,designation No3,universal type,suitable for shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified & directed.
S&F in repairs 100 mm Hasp and staple, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.
S&F Magnet catcher for CB shutter complete all as specified and as directed.
S&F 125mm long Stainless steel with rubber Door Mounted Hanging type Stopper in 16mm dia complete all as specified and as directed.
S&F steel window with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded and necessary arrangements to fixed with wooden scantling/supports etc complete all as specified and as directed.
S&F steel window with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded arrangements to fixed with wooden scantling/supports etc complete all as specified and as directed.
S&F steel ventilators with top hung shutters including hinges, steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and as directed.
S&F framed work such as grills, gratings etc. with ends of bars shouldered and or rebated or forged into spikes, framed guard bars etc confirming to Fe-290, Gde-E-165 complete all as specified and as directed.
S&F galvanized mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed.
S&F in repair galvanized mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed.
S&F 3mm thick plain glass, ordinary quality and glazing with oil putty in squares n.exc 0.5 Sqm in each pane complete all as specified and as directed.
S&F in repair 3mm thick plain glass, ordinary quality and glazing with oil putty in squares n.exc 0.5 Sqm in each pane including hacking out complete all as specified and as directed.
S&F in repair 4mm thick figured glass, ordinary quality and glazing with oil putty in squares n.exc 0.5 Sqm in each pane including hacking out complete all as specified and as directed.
M&L for preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
M&L for preparation of new or previously untreated surfaces of steel of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Demolition of brick work built in cement mortar complete all as specified and directed.
M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.
M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius in half brick thick wall built in CM 1:4 complete all as specified and as directed.
Taking down cement plaster on brick or stone walls etc including racking out joints hacking for key and scrubbing down with water etc complete all as specified and as directed.
M&L for rendering 15 mm thick on Brick wall finished fair & even in CM (1:6) complete all as specified and directed.
M&L for two coats of oil bound distemper over a layer of 3mm thick wall putty, rubbing with sand paper to achieve to smooth surfaces distemper over a coat of primer on newly plastered surface using roller only as per manufacturers instruction, complete all as specified and as directed.
M&L for three coats of white wash on newly plastered surface of wall including preparation of surface, complete all as specified and as directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets, complete all as specified and as directed.
Dismantling timber scantling 40 Sqcm and over in section, in any position of framed work complete all as specified and as directed.
S&F IInd class hard wood in scantlings clean sawn timber fixed as in door frame, frame work in ceiling and similar work complete all as specified and as directed.
M&L for preparing surfaces of wood and wood based material, new or old of any description and girth and treated with creosote oil complete all as specified and as directed.
S&F suspended false ceiling using anodized GI exposed ceiling suspension system of grid size 60 cm x 60 cm width main runner 'T" section of size 38 mm x 24 mm x 0.4 mm thickness and wall angle of size 24 mm x 24 mm x 0.3 mm thickness and cross Tee of size 24 mm x 24 mm x 0.43 mm thick (using 60 cm x 60 cm E board classic 4 mm thick ceiling board ) to be placed in a grid of GI system duly suspended with 4 mm dia GI bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing position for light fixtures, air conditioning diffuser and ducks, sprinkler, smoke detector etc. The main runner to be secured to structural soffit by hanger @ 1220 mm maximum C/C. The last hanger at the end of each runner should not be placed at more than 450 mm from the adjacent wall. Flush fitting 1200 mm cross 'T" to be inter locked between main runner @ 610 mm C/C so as to form 600 mm x 600 mm grid complete all as specified and as directed.
S&F 4mm thick asbestos cement plain building board, fixed in ceiling flat or sloping to timber frame work with screws complete all as specified and as directed.
S&F wooden cover fillets square or rectangular and sectional area exc 3 & n.exc 6 Sqcm of second class hard wood secured with nails complete all as specified and as directed.
S&F IInd class hard wood exc 13 & not exc 25 sqcm plain, fillets, square, rectangular or triangular in section, clean swan, secured with nails or brads complete all as specified and as directed.
Preparation of new wooden surfaces of any description n exc 10cm width or girth when unconnected with other painting or when painted in different tint and one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
S&F powder coated aluminium door with frame made with aluminium section of size 100 x 44 x 2 mm thk, vertical styles of shutters made with sections 65 x 44 x 2 mm thk, and top/middle/bottom rail of shutter with section 84 x 44 x 2 mm thk, including 5 mm thick tinted glass panes, insets including necessary fixing arrangement, joining cleats, glazing clips, rubber packing aluminium anodised beading screws etc, 100mm size hinges, tower bolt 200 mm size, mortice lock 100 mm size 4 lever,200mm size round handles etc, fitted to shutters and frames fixed in opening with aluminium hold fast of 25 x 3 mm flat 150 mm long 6 nos in each frame incl cutting holes in brick work and embedded in PCC 1:2:4 bed block of size 150 x 150 x 150 mm each and match the existing.
S&F powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (2 No.) hinge type B-21 100mm long (2 No.) suitable handle (1 No.) complete all as specified
S&F powder coated aluminium frame for doors, windows, ventilators, partitions etc with one or more rebates including joining cleats for fixing on walls/ floors of any description and in any position complete all a specified and as directed
Supply and fixing powder coated aluminium sliding window sliding on 3 tire frame of section 92 mm x 30 mm x 1.55 mm and shutters of section 20 mm x 40 mm x 1.55 mm fixed with 4 mm thick plain glass with rubber gasket handles lock ‘U’ channel with provision for aluminium grill fixed with aluminium frame etc all as specified & directed by the Engineer-in-Charge.
M & L for fixing ACP in repairs (aluminium composite panel) 4.5 mm thickness to Aluminium substructure at any height in any colour (as approved by Engr-in-Charge) Non Toxic PE core-3 mm, and back coil 0.5 mm) with minimum 30 +/- 5 miror PVDF coating on top coil polyster / epoxy coating on back coil (7+/- 2 micron) fixed on aluminium substructureas (size aluminium sections for substructure as specified by manufacture/specified in drawings and approved by Engr in Charge) with stinless steel fastening system of HG/ fischer Dash fastener on façade surface of any description not otherwise described and making 15 mm groove and applying non staining and non steaking sealant of Dow corning (789 or 91 HP) complete as per approved specification on straight surfaces. Aluminium composite panel cladding to be approved by GE. Rate quoted shall include sealing joints with sealcoat (Dow corning 789/991 up) of approved make with rod to make at any light. Make of ACP: Alucobond / Alexpanel / Archicon / Alomax. Aluminum frame to fix above said ACP shall be measured and paid separately, However material & labour required for fixing of ACP including SS anchor fastener, aluminium cleat of size 19 x 12 x 1.6 mm weather sealent backer rod etc are included in the quoted rate of ACP. Complete all as specified and as directed by Engr in Charge.The rate for aluminium sub structure is deemed to be included and will not be paid seperately.
S&F in repair 5.5mm thick plain glass, ordinary quality and glazing with oil putty/aluminium glazing clips in squares n.exc 0.5 Sqm in each pane
As per above item No-12 but exc 0.5 Sqm in each pane 5.5 mm thick sheet glass.
S&F in repairs stainless steel grade I 303 The welded joints of the SS pipes/rectangular size and with existing MS Balusters should be finished smooth by mechanical grinding and rubbing etc as directed. Note:- The rate is deemed to be included for the dismantling of the existing wooden hand rails and making good the distrurbed sarface matching with the existing adjoining surface complete all as specified and directed.
S&F powder coated aluminium grill with mesh 75 mm and aluminium bar 6 mm XPM type including all accessories such as channels for fixing grill screws etc aluminium section 15 micron thick anodizing alongwith stainless steel wire cloth ,complete all as specified and as directed by Engineer-in-Charge
S&F in repairs and fixed Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty floor spring for aluminum/glass door shutter of required size and making good to surface complete all as specified and directed
Taking down of aluminum/Glass doors carefully and re-fixing in same opening after necessary repairing/cleaning/greasing and overhauling of the complete door assembly and make the same fully functional all as specified and directed
Minor repair to aluminum/glass doors, windows, partitions and making good the same (i.e. Handles, hinges, rubber beadings, clips etc) complete all as specified and directed
S&F in repair's Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing,complete all as specified and as directed.
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing,complete all as specified and as directed.
S&F aluminium Mortice lock, vertical type, size 75 mm 4 Levels complete all as specified and directed
S&F in repairs aluminium Mortice lock, vertical type, size 75 mm 4 Levels complete all as specified and directed
Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as directed.
Demolition of cement concrete in ground floor and pavings nexc 15cm thickness (below or above ground level) , complete all as specified and as directed by Engr-in-Charge.
M&L cement concrete type B-0 (1:2:4) usin 12.5mm graded agg as in flooring 25mm thick as in sub base floor complete all as specified and directed
M&L non skid cermic coloured tiles 8mm thick ( square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, in floor etc and jointed in neat cement slurry and pointed in white cement or coloured cement to match the shade of tile including screed bed of mortar 15 mm thick in CM (1:6) all as specifed and directed.
All as per item No 89 but on dado / skirting over and including 10mm thick rendering in CM 1:4, complete all as specified and as directed.
M&L for vitrified ceramic tiles 10 mm thick (square/rectangular) Dark Shade polished area of each tiles not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cm 1:6 all as specified and directed.
All as per above item No 91 but on dado / skirting over and including 10mm thick rendering in CM 1:4, complete all as specified and as directed.
M&L for glazed ceramic coloured tiles (light shade) of size 350x250x7mm/450x300x7mm thick for work on vertical surface such as skirting, dado, set & jointed neat in cement slurry and pointed in white or coloured cement to match including10 mm thick plaster in CM (1:4) complete all as specified and as directed.
Taking up or down steel tubing and connection including cleaning for re-fixing or removal to store for 15 mm bore pipe.
Taking up or down steel tubing and connection including cleaning for re-fixing or removal to store for 20 mm bore pipe.
S&F tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors for 15 mm bore.
S&F tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors for 20 mm bore.
Cutting chases for concealed water tubing and making good in CM 1:3 on brick wall cutting n.exc 10 Cm in girth.
Supply and fixed in repair of PVC low level flushing cistern 10 Ltr capacity ISI mark syphonic action type push button incl flush pipe, ball valve ,handle incl bracket complete as approved make commander
S&F PVC connection 15 mm size with PTMT nut of length 450 mm
S&F in repair 15 mm dia angular stop cock with wall flange , screwed both ends for iron pipe or for union.
S&F in repair 15mm bib Cock CP fency type screwed down for iron pipe 15 mm bore
S & F 15 mm dia bore fancy type pillar taps ,cast copper alloy chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with capstan head, screwed for iron pipes or for union and fixed, complete all as specified and as directed.
S&F in repairs 15 mm dia bore cast copper alloy chromium plated fancy type wall mixer with pronision for overhead shower with and 115mm long bend pipe for cold & hot water complete all as specified and as directed.
S&F 15mm dia Centre hole mixer for WHB with connections cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed.
S&F in repair overhead Shower dia 180 mm Round Shape single flow with and shower arm dia 20 mm & 450mm long round shape with 90 degree for wall mounted shower with flange complete all as specified and as directed.
S&F in repairs vitreous china Couple water closet pan size 800x365x 650 mm trap distance S-250 mm and cisten with softclose seat cover complete all as specified and directed.
S & F in repair vitreous china wall hung wash hand basin size 200x550x400mm including full Pedestal brackets, Including Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed
S&F in repair chromium plated hand shower (health fauset), telephonic type with 8mm dia, 1 meter long CP flexible tube with wall hook and jet of approved make, suitable for 15 mm bore iron pipes or for unions and fixed complete all as specified and directed.
S&F in repair toilet paper holder, twin type CP fixed to wall with chromium plated brass screws and rawl plugs.
M&L Corner Glass shelf with bracket consisting of 5.5 mm thick sheet glass with chromium plated bracket guard.
S&F Soap dish holder brass chromium plated fixed with rowl plug complete all as specified & directed.
S&F in repairs 25 mm dia aluminium drapery rod with natural wooden finish and wooden ornamental attachement at both ends and matching curtains rings min 8 nos in one mtrs, complete all as specified and as directed.
S&F in repair PVC (PTMT alloy) bath room cabinet with mirror completes all as specified and as directed.
M&L for stainless steel Towel Rack with lower hanger with hook ,fixed to wall with rawl plug complete all as specified & directed.
Dismantling asbesots cement (corrugated, semi-corrugated etc) sheets in roof coverings Complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of colour having tensile strength of 550 Mpa as iin roof covering/cladding to wall, fixed with self tapping screws including dismantling complete all as specified and as directed.
S&F prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of colour having tensile strength of 550 Mpa as in plain sheet as in ridges, gutters , facia bd etc l, fixed with self tapping screws or 'J' / 'L' hooks including dismantling complete all as specified and as directed. .
Dismantling of structrual steel work including doors, gates but excluding frame truss etc.complete all as specified and as directed.
S&F Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0
S&F framed work such as ornamental and intricate design Gates and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc. similar work conforming to Fe 410-0 or Fe 310-0
D N ENTERPRISE (BID ID -3069868)
M/s Pramillabh Construction (BID ID -3070014)
kabitaconstruction (BID ID -3069996)
M/S D P BERLIA (BID ID -3067759)
D.D Construction (BID ID -3068989)
pintoo construction (BID ID -3066118)
M/s KL Agarwalla & Co (BID ID -3068928)
M/S MAHATO ENTERPRISE (BID ID -3069373)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .