Multifarious work for all weather protection provisions at Mandvi fire station in B ward.

Providing, detailing, composite fabricating members like Trusses, girders, bracings, supports, purlins, runners, and similar structural steel members fabricated using M.S. hollow tubular steel section(circular & rectangular pipes), of TTA Structura Make or equivalent conforming to IS 1239 part 1 and 2 and of grade Fe 250 as per specifications and approved fabrication drawings (which are to be prepared by Contractor and got approved from Engineer), including transportation of the same to site, erection of structural steel members for all heights & at all levels, provision of necessary erection bolts, fixing bolts, nuts, washers, cleats, stiffeners, gussets, base plate, and all necessary operations like preheating as per specifications, straightening, bending, cutting, drilling, grinding, machining if specified, welding, grinding, removing the welding burr and preparing surface for painting with wire brush cleaning and applying two coats of epoxy red oxide zinc phosphate primer of 30 microns each and two coats of Epoxy Corrosion Resistant Enamel paint of 30 microns after fabrication including touching up with spray painting after erection etc. complete as directed by Engineer

Providing and fixing single skin trapezoidal profiled sheeting 930 - 1020mm cover width 28-32 mm crests depth at 186-250 c/c ( above 195 mm c/c crest distance there will be minimum 2 ribs at the centre for stiffening). The feed material shall be manufactured from AZ 150 (min. 150 gms/sq.mt total on both sides) Zincalume / Galvalume sheets of minimum yield strength of 550 MPa, 0.45 mm BMT, ( 0.5 mm TCT excluding paint coating thickness), metallic hot dip coated with Al- Zn alloy (55% Aluminium, 43.5% Zinc, 1.5% Si ) as per AS 1397 / IS15961 & painted with Super Durable Polyester Color bond steel XRW or equivalent quality paint system of approved color, suitable for exterior application conforming to AS/NZS 2728:2007 type-4 / IS15965:class3 of approved make. The sheet shall have a total coating thickness of 35 microns, super durable polyester paint system of 20 microns on exposed surface and 5 micron reverse polyester coat on back surface over 5 micron primer coat on both surfaces. The paint system shall have stable inorganic pigments for color durability. The product will be fastened using no.12-14x55 mm (or as per design requirement ), mechanically coated with 25 micron Zn-Sn alloy or hot dipped zinc coated with min 40 micron hex self-drilling fasteners with EPDM washer of approved make confirms to AS3566:2002 class 3.

Supplying, fabricating, transporting to site and erecting 3.12mm thick MS gutter with all necessary supporting arrangement laid to proper slope, at all heights and levels, including surface cleaning, Grinding and removing the welding burr and applying one coats of red oxide zinc chromate primer and two coats of synthetic enamel paint on underside before erection & one coat of rubberized waterproof paint on upper side after erecting including making necessary connections with rain water pipes etc complete as directed.

Providing and laying in position plain concrete of specified grade cement

Supply & Installation of gypsum false ceiling

Light /Fan / Ex. fan Points with Modular switches & FRLSH wire

3/5 Pin Independent Plug (IP) with Modular switches

INDOOR LED FIXTURES - LED Square Recessed Down lighter- 36W (600X600)