REPAIR/REPLACEMENT TO FLOORING, PLASTERING AND MISC B/R WORK AT AEC TRG COLLEGE AND CENTRE PACHMARHI

Amount

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing.

S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing.

S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing.

S&F in repair 15 mm dia bib tap cast copper alloy (fency type), chromium plated, 'with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule all as directed.

S&F in repair pillar taps, 15 mm bore cast copper chromium plated fancy type screwed down, high pressure, screwed both ends for iron pipe or for unions.

S&F in repair stop valve, cast copper alloy, fancy type,chromium plated with long shank and cup (Concealed type), screwed down both ends for high pressure, as per ISI suitable for 15mm dia iron pipe all as directed.

S&F in repair 20mm dia brass chromium plated tubular towel rails,D type,60cm long between flanges,complete all as specified.

S&F in repair 125mm to 175mm hat pegs of aluminium, solid body fixed with screws complete all as directed.

S&F in repairs Shelf of PTMT (Minimum weight 300 gm) including chromium plated brass screws and wooden/ plastic cleats .

Taking down cement plaster on brick/block wall etc including racking out joints hacking for key, scrubbing down with water as described.

M & L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:4 finished fair and even complete all as specified.

M & L applying two coats of cement based paint on newly plastered or unplastered wall surface including preparation of surfaces, complete all as specified.

Demolition of brick work and stone/ boulder masonary built in cement mortar and lime mortar.

M/L for modular Brick work with sub class `B` bricks straight or curved on plan exc 6 m mean radius built in cement mortar( 1:4)

M & L rendering 10mm thick on other than fair face of brickwork or concrete surfaces in cement mortar 1:6 complete all as specified

M & L applying three coat of white wash on newly plastered or unplastered wall surface including preparation of surfaces, complete all as specified.

Demolition of cement concrete in ground floor and paving n.exc 15 cm below or above ground level.

M & L 75mm th PCC 1:3:6 type C-2 using 20mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified.

M&L 25 mm thick cement concrete 1:2:4 type B 0(using 12.5mm graded aggregate) as in floor finished fair and even complete all as specified and directed.

M&L vitrified tiles tiles10 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:4) complete all as specfied and directed.

Dismantling floor hearth or wall tilling and removing rubbish off the premises.

M&L for coloured non-skid ceramic Tiles 7 to 8mm thick square in floors area of each tile exc.0.06 sqm but not exc 0.11 sqm in floor etc and set in neat cement slurry jointed and pointed white cement to match over 15mm thick screed in CM 1:6

M&L glazed ceremic tiles in vertical surfaces 350x250x7 mm/450x350x7mm thick, set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 10 mm thick rendering in CM (1:4) complete all as specfied and directed.

S & F rotational moulded polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position 500 ltrs capacity including dismentling of existing water tank of any description, complete all as specified in SSR Part I .

S & F rotational moulded polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position 1000 ltrs capacity including dismentling of existing water tank of any description, complete all as specified in SSR Part I .

S & F in repair gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 20 mm dia.

S&F in repair ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 20mm dia iron pipe and fixed.(Minimum weight 210gm)

S&F ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 20mm dia iron pipe and fixed.(Minimum weight 210gm)

Hacking out old broken glass (any thickness, size, quality or description) from wooden or steel frames.

M & L sheet glass ordinary quality 3mm thick and glazing with oil putty in squares n.exc. 0 .5 sqm each pane complete all as specified.

S&F in repairs galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanesed wire stapels complete all as specifed and directed.

Taking down shutter only n. exc 1.0 sq.m each and removing from the site as directed by Engineer in charge.

Taking down shutter only. exc 1.0 sq.m but n.exc 2.00 sqm each and removing from the site as directed by Engineer in charge.

M&L 2nd class hard wood 30 mm thick glazed and skeleton window shutters open rebated and prepared to received glass, gauze etc divided into squar with plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc,

M&L 35mm thick plain framed panelled shutter(one/two pannel)with lock rail and panel of 9mm B.W.P. commercial ply.The size of rail and style as per IS-1003(Part-I),kiln seasoned and chemical pressure treated

Taking down chowkat with shutter exc 1.5 sq.m but n.exc 4 Sqm each and removing from the site as directed by Engineer in charge.

S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, as per specifications and drawing complete or as directed by Engineer-In-Charge.

S&F factory made solid PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for bottom and top rails. MS frame shall be covered heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail& bottom rail on either side & as gap insert for top rail & bottom rail; Panelling for plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling and fixing in the frame at the site as per specification.

S&F 100 mm size MS butt hinges medium weight cold rolled fixed with screws to frame complete all as directed.

S&F 75 mm size MS butt hinges medium weight cold rolled fixed with screws to frame complete all as directed.

Supply only 50 mm size MS butt hinges medium weight cold rolled fixed with screws to frame complete all as directed.

S&F125 mm long,aluminium,anodised, barrel tower bolts of extruded section all as directed.

S&F150 mm long,aluminium,anodised, barrel tower bolts of extruded section all as directed.

S&F 125 mm size aluminium handles,cast type,anodised all as directed.

S&F 150 mm size aluminium handles,cast type,anodised all as directed.

Dismantling wall and ceiling board or insulation boards/ slabs/ blankets, any thickness, including cover fillets.

M&L for suspended false ceilling comprising of 6mm thick non asbestos fibre cement bulding boards fixed or laid/inserted to GI frame work with screws over Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

M&L cubboard shutter made of 19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work

S&F in repair harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc all as directed.

S&F in repairs 10 ltrs capacity (PVC), valve less, syphonic action type, fluhsing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe, complete all as specified and directed.

S&F in repair vitreous china,white, padestal suitable for wash hand basin, flat back size 550x400mm incl waste coupling and waste pipe complete all as specified and directed.

S&F in repair vitreous china water closet Padestal pattern( white ) excluding fixing bolts, flushing cistern and flush pipe complete all as directed.

Supply only 15mm dia brass chromium plated pillar tap, with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipe all as directed.

Supply only plastic sheet covers for water closet, black,closed pattern with flat bottom with mild steel chromium plated or alluminised hinging device.

S&F PVC jet spray with 1.0 mtr long PVC pipe and CP connector all as specified.

Dismantling plain or corrugated steel sheeting,any gauge, thickness, includingNainital or similar pattern roofcoverings

M&L Pre- painted galvatume aluminum zinc coating GI based corrugated steelsheet 0.50mm thick of ancolour having tensilestrength of 550 Mpa as in roof covering/ cladding towall, fixed with self tap ping screws as specified .

Dismantling timber scantlings as in fillets, rails, posts, rafters,purlins, etc. under 40 sq. cm insection in framed work 40 sq. cm and over in section, in any position

S&F for MS framed works as in purline, rafters, column square/rectangular, round or angle section, fixed with and including iron cleats or other connected plates flate iron wind ties etc incl bending of MS section as requried omplete all as specified and as directed.Fe-410 gd 250

M&L preparation of new steel surface and applying two coats of synthetic enameled paint over a primming coat of red oxide etc

Dev Enterprises

SUBIR KUMAR ROY