REPAIRS TO STEEL FURNITURE, MODULAR FURNITURE AND WOODEN FURNITURE AT OD AREA UNDER GE AVADI.

Amount

PART -I - REPAIRS TO STEEL FURNITURE

CHAIR STUDENT WITH FOLDING TABLE

Removing existing unsv seat frame of Chair Student with folding Table Top and s&F new seat frame duly canned with 2 mm plastic cane for seat and 4 mm wide for border of seat frame and duly polished with french polish complete all as specified by as directed by Engr in Charge..

All as per Item No 1.02 above but back frame.

Removing existing unsv folding device system of chair student with folding table and S&F new folding device complete all as specified and as directed by Engr-in-charge.

S & F 18 mm prelaminated particle board of exterior grade (MFPB) (PLB) white, as table top of chair student with folding table as per existing shape and size including provision of 4mm thick TW beading alround the table duly french polished complete all as specified and as directed by Engr-in-charge.

Removing existing unsv hand rest of chair student with folding table and S&F new hand rest made out of 2nd class h/w complete all as specified and as directed by Engr-in-charge

CHAIR TUBULAR STEEL WITHOUT ARMS

Removing existing unsv seat frame of Chair tubular steel with out arms and s&F new seat frame duly canned with 2mm plastic cane for seat and 4 mm wide for border of seat frame and duly polished with french polish complete all as specified as directed by Engr in Charge..

All as per Item No 6.00 above but back frame.

Chair school with hard board/rest

S & F 18 mm prelaminated particle board of exterior grade (MFPB) (PLB) white of chair school with hard board/rest as per existing shape and size including fixing of 4mm thick TW beading alround the table duly french polished complete all as specified as directed .

Removing existing unserviceable PVC shoes and S & F PVC shoes superior quality fix with screws to chair tubular steel with arms, w/o arms, CBA Spl and student chairs aall as specified as directed .

Removing existing unserviceable PVC caps and S & F new superior quality PVC caps to chair tubular steel with arms, w/o arms, CBA Spl and student chairs all as specified as directed .

Removing existing corroded MS square of table dining ORs/Table clk steel/Table office Offr/Table typist and supply and fix new MS square tube of size 25mm x 25 mm thick duly gas welding with high workmanship including preparing the welding surfaces smoothly and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified as directed .

Removing old unserviceable table top from table office officers Steel supply and fix new table top made out of 18mm thick prelaminated particle board with 4mm thick TW beading all round duly French polish to beading and fixing with stainless steel screws all as specified as directed .

All as per item No 12.00 here in before but for table dining ORs

All as per item No 12.00 here-in-before but for table office clerk steel

All as per item No 12.00 here-in-before but for table 900x600x760 mm steel

Removing existing unserviceable drawers of table clerk steel and supply and fix new drawers made out of 22 gauge MS sheet of size and shape as per drawing including applying two coats of synthetic enamel OG Paint over a coat of red oxide all as specified and as directed by Engr-in-charge.

All as per item No 13.00 above, but for table office typist steel

Removing existing old unserviceable locks from table office clerk steel/table office officer steel/table typist steel and supply and fix new locks steel made out of brass lever with duplicate keys of standard size and pattern suitable to the existing locks all as specified as directed .

Removing existing unserviceable/worn out legs from Almirah Steel large and supply and fixing new legs made out of 20 gauge MS Sheet as per existing shape & size and applying two coats of synthetic enamel paint over a coat of red oxide prime all as specified as directed .

All as per item No.15.00 above but for Almirah Steel medium with shelves

Removing existing old worn out/unserviceable shelves of Almirah steel large and supply and fixing new shelfs of size 910 x 430mm made out of 20 gauge thick MS black sheet applying two coats of synthetic enamel paint over a coat of red oxide all as specified as directed .

All as per item No. 7.00 above but for Almirah Steel Medium with shelves of size 760 x 400mm.

Removing existing old unserviceable locks from Almirah Steel large/medium and supply and fixing of new locks steel made out of brass levers for 3 way locking device with suitable stainless steel keys in duplicate of standard size as per existing locks all as specified as directed .

Removing existing broken handle from Almirah large/medium steel and supply and fixing new handle superior quality chromium plated of size 150mm matching with existing one all as specified as directed .

Removing existing old unserviceable plywood from charpoy GI pipe with plywood top and S & F of new plywood comercial 12mm thick of suitable size of charpoy with 4mm thickTW edging alround of plywood duly polished all as specified as directed .

Removing existing broken Fabricated Seat from Chair Varandha and supply and fixing new Fabricated Seat ISI Mark all as specified as directed .

Removing existing broken Fabricated back from Chair Varandha and supply and fixing new Fabricated back ISI Mark all as specified as directed .

CHAIR TUBULAR STEEL WITH ARMS

Removing existing unsv seat frame of Chair tubular steel with arms and s&F new seat frame made of Ist class HW duly canned with 2 mm plastic cane for seat and 4 mm wide for border of seat frame and duly polished with french polish complete all as specified as directed .

All as per Item No 25.00 above but back frame.

Removing existing unsv hand rest of Chair tubular steel with arms and s&F new hand rest made out IInd class H/W fixed with screws of reqd size as per existing hand rest and duly painted all as specified as directed .

CHAIR CBA SPL WITH HAND REST

Removing existing unsv seat frame of Chair CBASpl with hand rest and s&F new seat frame made of Ist class HW duly canned with 2 mm plastic cane for seat and 4 mm wide for border of seat frame and duly polished with french polish complete all as specified as directed .

All as per Item No 29.00 above but back frame.

Removing existing unsv hand rest of Chair CBA Spl with hand rest and s&F new hand rest made out Ist class H/W fixed with screws of reqd size and nos and to made to directed same as per existing and duly painted all as specified as directed .

SCHEDULE A PART II- REPAIRS TO MODULAR FURNITURE

Removing existing seat cushion including tapestry cloth and plywood for chair visitor and supply & fix new seat cushion including tapestry cloth over a cloth mulmul and plywood for chair visitor all as specified and directed .

All as per item No 33.00 described herein before but back cushion of visitor chair

All as per item No 33.00 described herein before but seat of chair computer high/medium back

All as per item No 33.00 described herein before but back of chair computer high/medium back

All as per item No 33.00 described herein before but seat of chair executive high back

All as per item No 33.00 described herein before but back of chair executive high back

Removing existing unserviceable tapestry cloth from seat of chair visitor and Supply & fix new tapestry cloth to chair visitor over a cloth mulmul (cost of tapestry cloth not less than Rs. 180/- Mtr) all as specified and directed .

All as per item No 34.00 described herein before but back of chair visitor

All as per item No 34.00 described herein before but seat of chair computer High/medium/low back

All as per item No 34.00 described herein before but back of chair computer high/medium/low back

Removing existing unserviceable arms of chair visitor and supply and fix new high quality rubberized plastic arms matching to existing arm rest complete all as specified and directed .

All as per item No 33.00 described herein before but chair computer high/medium/low back

All as per item No 33.00 described herein before but chair executive high/med/low back

Scrapping of existing rested mild steel frame of chair visitor/computer with emery paper and applying one coat of synthetic enamel paint complete all as specified and directed .

Removing existing unserviceable plastic/nylon bass of chair computer high/medium/low back and supply & fix new Metal base best quality as per existing shape and size complete all as specified and directed .

All as per item No 34.08 described herein before but metal base of chair executive high/med/low back.

Removing existing unserviceable PVC castor wheels for chair computer chair executive high/ med/low back & table computer and supply and fix new castor wheels of superior quality matching to existing shape/size complete all as specified and directed .

Removing of existing unserviceable gas lift system of chair computer and chair executive high/med/low back and supply and fix new gas lift system of superior quality. Matching to existing shape and size complete all as specified and directed .

Removing existing unserviceable tilting mechanism of chair computer and chair executive high/med/low back and supply & fix new suitable tilting mechanism complete all as specified and directed .

Removing existing unsv top of all type of table computers and supply and fix new top made out of 18mm thick both side pre laminated particle board suitable size and shape and duly matching to the existing shade complete all as specified and directed .

All as per item No 38.00 described hereinbefore but base of table computers

All as per item No 38.00 described hereinbefore but side panel of table computer

All as per item No 38.00 described hereinbefore but drawer of table computer

Removing existing unserviceable locks of table computer and supply & fix new suitable locks with duplicate keys of standard size and pattern suitable to the existing lock holes complete all as specified and directed .

Removing existing unserviceable wooden/plastic key board tray of computer table and work station and supply & fix new key board suitable size and shape and duly matching to the existing shape complete all as specified and directed .

Removing existing unserviceable roller channels of computer table/work stations and supply and fix new roller channels duly matching to the existing shape and shade complete all as specified and directed .

Removing existing unserviceable leather/tapestry and cushion cloth (Not less than Rs.300/- per mtr) of sofa set single seater (VR office needs and supply & fix new leather/tapestry cloth over a cushion and cloth mulmul as per existing shape and size all as specified and directed .

All as per item No 42.00 described hereinbefore but sofa set 5 seater Spl model No KL&CYL -II

All as per item No.42.00 described hereinbefore but sofa set 3 seater model horizon Godrej

Removing existing unserviceable seat cushion including tapestry cloth and plywood for chair cushioned and supply & fix new seat cushion including tapestry cloth over a cloth mulmul and plywood for chair cushioned all as specified and directed by Engr-in-charge.

All as per item No 45.00 described hereinbefore but back of chair cushioned.

Removing existing unserviceable desk box of class room desk for two student and supply & fix new desk box of class room desk for two student as per existing shape and size all as specified and directed .

Removing existing unserviceable desk and seat of school dual desk and supply & fix new desk and seat of school dual desk as per existing shape and size all as specified and directed .

Removing existing unserviceable seat and back of school dual desk with book shelf and seater with back and supply & fix new seat and back of school dual desk with book shelf and seater with back as per existing shape and size all as specified and directed .

Removing existing unserviceable seat of chair perforated single seater and supply and fix new seat of suitable size and shape and duly matching to the existing complete all as specified and directed .

All as per item No 50.00 described hereinbefore but back of chair perforated single seater.

Removing existing unserviceable locks of work stations and supply & fix new suitable locks with duplicate keys of standard size and pattern suitable to the existing lock holes complete all as specified and directed .

SCHEDULE A PART III- REPAIRS TO WOODEN FURNITURE

Removing existing unserviceable plywood and S & F 12 mm thick Commercial face plywood of size 75"x36", 7 ply for Bed Plywood top all as shown on drawings including shaking / tightening the Bed ply providing four wooden brackets to all Corners of Bed Plywood all as specified and directed .

Removing of existing unserviceable 4 mm thick ply wood and Supply and fixing One Side teak veneerable face fixed to both side of head board including Teak wood beading of size 25 x 4 mm for Bed Plywood top all as specified and directed .

All as per item No 55.00 here-in-before but for foot board.

Removing existing unserviceable long rail and Supply and Fix First Class hard wood long rail (one number) to Bed Plywood top all all as specified and directed .

Removing existing unserviceable shutter (left/right) and Supply and Fix doors made out of 18 mm thick pre laminated particle board of approved shade with 4 mm thick TW beading alround the shutters shall be fixed with with 20mm size piano hinges including fixing of 100 mm long aluminium anodised bow handle for side board all as specified and directed .

Removing existing unserviceable plywood on back side of side board and S&F 6 mm thick Plywood Commercial face for the rear side of side board all as specified and directed .

Removing existing unserviceable shelves from Side Board and Supply and Fix 12 mm thick Commercial face plywood for shelf (one number) for side board all as specified and directed .

Removing existing unserviceable door and Supply and Fix door for table writing made out of 18 mm thick Pre laminated particle board with 4 mm thick TW beading alround duly french polished including hinges, knobs all as specified and directed .

Removing existing unserviceable back plywood and S&F 6 mm thick Commercial face Plywood for the back side of table writing all as specified and directed .

Removing existing unserviceable bottom plywood of drawers and S&F 6 mm thick Commercial face Plywood for drawers bottom of table writing./Side Board/Table 3'x2' all as specified and directed .

Removing existing unserviceable top and S & F 18 mm thick Pre laminated particle board for Top of table writing including 4 mm thick TW beading alround duly french polished and tightening the shaking frame with wooden pins and all as specified and directed .

All as per item No 65.00 here-in-before but top for Table of size 900 x 900 mm .

Removing existing unserviceable top and Supply and Fix 18mm thick Pre laminated particle board for top of teapoy Verandah with 4mm thick TW beading alround duly french polished all as specified and directed .

All as per item No 66.00 here-in-before but Top of teapoy.

All as per item No 44.00 here-in-before but Top of table office officer wooden.

All as per item No 66.00 here-in-before but top of Peg table.

All as per item No 66.00 here-in-before but top of table dining for 6 Persons.

All as per item No 66.00 here-in-before but top of table 5'x2'-10".

All as per item No 66.00 here-in-before but top of table office clerk wooden

All as per item No 66.00 here-in-before but top of table dining for 8 Persons.

All as per item No 66.00 here-in-before but top of table centre .

All as per item No 66.00 here-in-before but top of table 3'x2' w/drawer, w/o drawer

Removing existing broken/unserviceable top long rail of Teapoy and Supply and Fix top long rail (one number) with first class hard wood for Teapoy all as specified and directed.

All as per item No 76.00 here-in-before but legs (one number) for table dining for 6/8 Persons.

All as per Item No. 76.00 here-in-before but top long rail (one number) fabricated with first class hard wood for table dining 6/8 Persons .

All as per item No 76.00 here-in-before but short rail (one number) for table dining for 6/8 Persons.

All as per item No. 76.00 here-in-before but legs (one number) for table centre and tightening the frame with wooden pins.

All as per item No. 76.00 here-in-before but leg (one number) for table 3'x2' w/drawer, w/o drawer .

All as per Item No. 76.00 here-in-before but top long rail. S & F with first class Teak wood for table 3'x2' w/drawer, w/o drawer .

All as per item No 75.00 here-in-before but front leg (one number) for chair writing .

All as per item No. 76.00 here-in-before but rear leg (one number).for chair writing .

All as per item No. 76.00 here-in-before but stiffener (one number).for chair writing/CBA .

All as per item No. 76.00 here-in-before but arms (handle) one number for chair writing.

All as per item No 76.00 here-in-before but front leg of chair dining/chair WBB .

All as per item No 76.00 here-in-before but for rear leg of chair dining/chair WBB .

All as per item No 76.00 here-in-before but stiffners from chair dinning/WBB.

All as per item No. 76.00 here-in-before but for side/front/back rails .

All as per item No. 76.00 here-in-before but back rest .

All as per item No. 76.00 here-in-before but front leg (one number) for chair easy .

All as per item No. 76.00 here-in-before but rear leg (one number) for chair easy .

All as per item No 76.00 here-in-before but legs of table center .

All as per item No. 76.00 here-in-before but legs (one number) of peg Table.

All as per item No 76.00 here-in-before but legs from teapoy all as per existing shape/size.

All as per item No 76.00 here-in-before but arms (one number) for chair easy .

All as per item No 76.00 here-in-before but seat (bottom) made out of 6mm thick commercial face plywood for chair wooden with out arm.

Removing of existing 6mm thick commercial plywood for rear side of table bed side and S&F 6mm plywood all as specified and directed.

Removing existing UNSV/damage top of the table bed side and supply and fixing of new top made of pre laminated particle board 18mm thick as per shape/size shown on drawings including provision of 4mm thick TW beading alround duly french polished all as specified and directed.

Supply and Fix 5 mm thick mirror for table dressing Ladies including removing of existing all as shown on drawings including providing 6mm thick commercial face plywood for rear side of mirror all as specified and directed.

All as per Item No. 101.00 here-in-before but for Table Dressing Gents.

Removing existing UNSV/damage drawers of table dressing gents supply and fixing of new drawer made of out of 12mm thick ply wood for sides, 6mm for bottom and back side of the drawer, 18mm thick pre laminated particle board including 4mm thick teak wood beading duly french polished shall be fixed front side along with new knob all as specified and directed.

Removing existing unserviceable top of TV Trolly and S & F new top made out of 18mm thick pre laminated particle board including 4mm thick teak wood beading duly french polished all as specified and directed.

Removing existing unserviceable/broken glass door of TV Trolly and S & F new door glass 6mm thick all as specified and directed.

Removing existing unserviceable/broken castor wheel of TV Trolly and S & F new castor wheel of best quality all as specified and directed.

S & F of new wooden corners made to shape out of 75mm x 75mm x 25mm thick in teak wood duly french polished and fixed to table dining 8 pers, 6 pers, table 3' x 2' with/without draws, table 900mm x 900mm, table 1 PAP, table offrs wooden, table office clk wooden, table writing and bed with plywood top all as specified and directed.

Removing existing UNSV/damaged cushions of sofa sets and supply & fixing of new cushions 100mm thick 40 density of 22" x 21" with tapestry cloth not less than Rs. 300/- per metre, including provision of cover made of cloth mulmul. The cover made of tapestry shall be provided with openable Zip/Chain all as specified and directed.

M & L for removing unserviceable tapestry cloth of sofa set and providing new cover with openable Zip/Chain made of tapestry cloth costing not less than Rs 300/- per metre over provision of mulmul cloth cover all as specified and directed.

Removing of existing unserviceable / damaged. Wooden shelves of Almirah large wooden and supply and fixing of new shelf made out of ply wood commercial 19mm thick as per shape and size all as specified and directed.

All as per Item No 110.00 here-in-before but for Almirah medium wooden with shelves

Removing of existing unserviceable / damaged shutters (Left & Right) of locker bed side wooden and supply and fixing of new shutters made out of pre-laminated particle board 18mm thick fixed with MS piano hinges and edges provided with 4mm thick TW beading duly french polished including 2 Nos of aluminium anodozed handdle of size 4" best quality & aluminium hasp & Stapple of size 50mm all as specified and directed.

Removing existing unserviceable / damaged back 6mm ply of locker bed side and supply and fixing of new back ply of commercal ply wood 6mm thick as per existing shape / size all as specified and directed.

Removing existing unserviceable / damaged leg frame of locker bed side and supply and fixing of new leg with wooden frame made out of IInd class hard wood as per shape / size all as specified and directed.

Removing existing unserviceable / damaged Box of Desk FD-107 and supply and fixing of new box made out of 18mm thick pre-laminated particle board with 4mm thick TW beading alround duly french polished as per existing shape/sized all as specified and directed.

Removing existing unserviceable / damaged top of the table card and supply and fixing of new top made out of plywood commercal 19mm thick duly covered with blaize green cloth fixed with 4mm thick teakwood beading duly french polished alround the top all as specified and directed.

Removing existing unserviceable / damaged long rails from charpoy newar with plywood top and supply and fixing new long rail made out of Ist class HW kong/sal as per existing shape/size all as specified and directed.

Removing existing broken/unserviceable top short rail (one number) and supply and fixing of new for teapoy all as specified and directed.

Removing existing broken/unsv stiffners of sofa set single/ three seater and S&F new stiffners Ist class in T/W as per existing shape/size all as specified and directed.

Removing the existing broken/unsv rear leg and supply and fix new leg for sofa set 3 seter/single seater 1st class teak wood all as shown on drawing No FD-258 & FD-281 all as specified and directed.

Removing existing broken/unserviceable Front leg and supply and fixing of new for Sofa set 3 Seater/single seater all as specified and directed.

Removing existing broken/unserviceable Front/back Rail and supply and fixing of new for Sofa set 3 Seater all as specified and directed.

Removing existing broken/unserviceable Hand Rest and supply and fixing of new for Sofa set 3 Seater/single seater all as specified and directed.

Provn of moulded cushion made of 12mm thick ply commercial and fixed with PU moulded cushion of 75mmx40 density duly covered with cloth mulmul and fininshed by providing with new tapestry cloth as per existing shape and size all as specified and directed.

M&L for removing of existing unsv mirror 5mm thick 300x440mm and S&F new mirror as per existing shape & size to Hat stand with mirror all as specified and directed.

Removing existing unsv plywood of hat stand with mirror and S&F plywood commercial OST 18mm thick alround the 4mm thick Teak wood beading with fixing of two Nos key plates all as specified and directed.

Removing existing unsv peg stay from hat stand and s&F new CP peg stay all as specified and directed.

Removing existing unsv cane from chair writing/CBA, Chair dinning and chair easy and cleaning recaning with new 2mm wide plastic cane superior quality and 4mm width plastic cane for border all as specified and as directed

Removing existing old unsv locks from table writing/almirah med wooden/table office officer wooden/table 5'x2'-10"/table office clerk wooden/table 3'x2' with drawer/locker bed side wooden and supply and fix new locks with steel body and leavers made out of brass with stainless steel keys in duplicateof standard size and pattern suitable to the existing locks complete all as specified and as directed.

Removing existing unsv nylone bush 25mm and supply & fix new nylone bushesh superior quality with suitable size to table office officer wooden/Table office cleark wooden/table dinning 6/8 person /side board/table writing /table 3'x2' with drawer/without drawer/Sofa Set 3 seater/5 seater all as shown in drawings complete all as specified and as directed

Removing existing unsv nylonebush 20mm and supply & fix new nylone bushes superior quality with suitable size to chair dinning /CBA, chair WBB wooden chair writing and chair easy /Teapoy/peg table all as shown in drawing complete all as specified and as directed

Removing existing unsv knob and supply & fixed new knobs superior quality with suitable size to table 3'x2' with drawer/table office clerk wooden/side board/table dressing ladies/table dressing Gents/Table writing all as shown in drawing complete all as specified and as directed

Removing & Existing unsv plywood from Charpoy GI Pipe with ply top and S & F new plywood top size 2m x 0.92 m suitable to size & shape including 75mm bolt, nut & washers,4mm TW beading and one coat of polishing all as specified and directed.

Removing & Existing UNSV Poly Propyline Seat for Chair Dining and S&F of New Poly Propyline Seat ISI quality and Screws all as specified and directed.

REENA INDUSTRIES (BID ID -3481239)

LEO ENTERPRISES (BID ID -3481539)

Mahesh Traders (BID ID -3475071)

SHANMUGA TRADERS (BID ID -3474722)