WELCOME MAINTENANCE, CLEANING/REPAIR OF SEWAGE LINE, MANHOLE, SEPTIC TANK, SOAKAGE WELL AND OTHER CONNECTED REPAIRS AT AF STN DADRI UNDER AOR OF GE (AF) FARIDABAD

Amount

Cleaning of pipe drains by jet mechine, 100 mm internal dia, drain pipe upto 1.50 m in depth and removal of sludge/silt/liquid/mud and sand (in foul position) etc, outside the MoD land including testing of drains by filling the pipes with water, complete all as specified and directed.

All as per item No 01 above but exceeding 1.0 m and not exceeding 2.0 m in depth, complete all as specified and directed.

Cleaning of manhole by mechanical scrappers, exc. 0.5 m but n.exc 2.0 m depth and removal of sludge/silt/liquid/mud/sand/water etc in foul position, outside the MoD land, complete all as specified and directed.

Dewatering/desilting of septic tanks, soak wells etc and cleaning of all sludge, silt residue of both organic and inorganice in nature by mechnical scrappers etc and disposal of the same outside the MoD land including dumping the material to any depth, complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar (1:6) on fair faces of brick works or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed.

Supply only integral water proofing compound conforming to IS-2645-1975, complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, mixed with water proofing compound @ 3 % by weight of cement, finished even and smooth without using extra cement, complete all as specified and directed. Note : WPC shall be measured & paid separately.

M&L for rendering 10mm thick in cement mortar (1:3) on ceiling surface, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of distemper oil emulsion over a coat of chalk whiting as a preparatory to distempering complete all as specified and directed.

M & L for preparing newly plastered or previously untreated walls surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc but excluding precast concrete articles, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan not exc 6 m mean radius built in cement mortar (1:6), complete all as specified and directed.

S&F for vitreous china squatting pan, Orissa pattern, size 580x440 mm, white with integral foot rest (exclusive flusing cistern& flush pipe) including cast iron 'P' or 'S' trap of 100 mm bore pipe fixed in PCC 1:2:4 type B-2 and necessary lean concrete, fixed as in repairs, including making good the surface to match with existing floor finish fixed as in repair, complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type flushing cistern, low level , white, with inlet ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern for 10 litres capacity complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and directed.

Demolition of tiles/ Interlocking tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons, etc, complete all as specified and directed.

M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in sub base, complete all as specified and directed.

M&L for coloured Machine pressed precast concrete interlocking paver block, any shape and size with grey cement and coloured pigment confirming to IS 15658-2006 with 80 mm thickness, M-40 Grade, complete all as specified and directed by Engineer-in-Charge.

All as per item No 20 but except interlocking paver block.

M&L for Sand filling under floors or in foundation including watering and consolidating, complete all as specified and directed.

M&L for 75 mm thick, Plain cement concrete type C-2 1:3:6 (40 mm graded stone aggregate) as in plinth protection etc., complete all as specified and directed.

M&L for 55mm thick, PCC 1:2:4 type B-1 (20mm graded stone aggregate) as in flooring, finished even and smooth without using extra cement, complete all as specified and directed.

Demolition and breaking up drain pipes, 100mm dia ( Salt Glazed ware, AC, PVC or reinforced concrete and like) set in cement mortar including PCC bed and haunching and removal of debris to a distance exc 50m and n exc 100m all as specified and directed.

Demoltion and breaking up existing sewage, 150mm dia (Salt Glazed ware, AC or reinforced concrete and the like) set in cement mortar including PCC bed and haunching and removal of debris to a distance exc 50m and n exc 100m all as specified and directed.

S&F PVC (SWR ), pipes of 110 mm dia single socketed , in any length with rubber ring joints , laid in trenches or in floor complete all as specified and directed .

M&L for 150mm internal dia salt glazed stone ware pipe Grade 'A' laid in trenches and jointed complete all as specified and directed. Note : (i) Excavation and earth work and concrete for bed and haunching of pipe shall be measured and paid separately.

M&L for cement concrete 1:3:6 type C-2 stone aggregate as in bed to drain pipes of 100 mm bore including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-2 stone aggregate as in bed to drain pipes of 150 mm bore including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide and n exc 1.5m deep and getting out in soft or loose soil for shafts, wells,drains, manholes etc, n.exc 10Sqm on plan for sewage line, foundation etc, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.

Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

M&L for PCC 1:2:4 type B2 using 40mm graded stone aggregate as in surface channels, drains, benching of manholes etc, finished even and smooth without using extra cement complete all as specified and directed.

M&L for Plain cement concrete 1:2:4, type B1, using 20 mm graded stone aggregates as in coping including necessary formwork, complete all as specified and directed.

Cutting into existing manholes for connecting new drains making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished and reforming benching as required, 100mm dia pipe complete all as specified and directed.

Cutting into existing manholes for connecting new drains making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished and reforming benching as required, 150mm dia pipe complete all as specified and directed.

Demolition of reinforced cement Concrete of any description and in any position not otherwise specifically provided as in cover slab for manholes etc., complete all as specified and directed.

M&L for pre-cast reinforcement cement concrete (1:2:4) Type B-1, using 20 mm graded stone aggregate as in cover slab for manholes etc.and set in cement mortar (1:6), including necessary formwork, complete all as specified and directed.

M&L for pre-cast PCC 1:2:4, Type B-0, using 12.50 mm graded crushed stone aggregate as kerb stone set in cement mortar (1:6), including necessary formwork, complete all as specified and directed.

M&L for mild steel TMT bars 6 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Dismantling of wrought iron or mild steel work any description and fixed in any position complete all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

Dismantling of AC (corrugated, semi corrugated etc.) sheets in roof coverings etc, complete all as specified and directed.

S&F for pre-painted galvalume aluminum, zinc coating confirming to 150 GSM, GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap, laid to slope all as per manufacturer / profile maker instruction, complete all as specified and directed.

M&L for preparing old decorated wall surfaces, filling of holes and cracks with lime putty or plaster of paris and applying one coat of white wash on walls, complete all as specified and directed.

All as per item No 46 above but on ceilings.

M&L for complete removal of existing treatment of walls including preparing old plastered surfaces of wall, filling of holes with plaster of paris and applying two coat of oil bound distemper over applying a coat of 1mm thick wall care putty on walls, complete all as specified and as directed.

M&L for prepration of old surfaces of walls, filling of holes with plaster of paris and applying one coat of oil bound distemper, complete all as specified and directed.

M&L for applying one coat of 3mm thick wall care putty on wall surfaces, complete all as specified and directed.

M&L for preparation of old surfaces of steel of any description , over 10 cm in width or girth not otherwise described applying one coats of synthetic enamel paint (Ist quality), complete all as specified and directed.

All as per item No 51 above but on Wooden surfaces.

Dismantling floor, hearth or wall tiles including cement mortar, concrete bedding and removing rubbish off the premises complete all as specified and directed.

M&L for coloured, Ist quality, Non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding exc. 0.06 sqm but n.exc. 0.11 sqm, in floors etc. Set over and including 15 mm thick screed bed in cm (1:6) and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for coloured, Ist quality, Glazed ceramic tiles in vertical surfaces 350 x 250 x7 mm/ 450 x 350 x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match laid over & including rendering 10mm thick in cement mortar 1:4 on stone masonry surfaces or surfaces other than fair face of brick work to receive glazed tiles/granite complete all as specified and directed.

M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like, over and including 15 mm thick screed bed or bedding layer of cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Dewatering, cleaning and removal of all scales, dirt etc from PVC tanks, capacity 500 & 1000 Ltrs by using following :- (a) Dewatering and cleaning with mechanized process. (b)Scrubing all internal surface of tank by steel wool with using specialized solution like swipe pro etc to remove all scale and dirt. (c) Clean all scales and dirt by using vaccum cleaner. (d) Finally clean the tank and mouth of circulating pipes etc with clean water. Marking with white paint on tank ‘Date of cleaning the tank ’, complete all as specified and directed.

S&F in repair, PVC tank lid (cover) suitable for 500/1000 litres capacity water tank with hinged and hooked fixing by steel screw for existing PVC water tank on buildings, complete all as specified and directed.

S&F in repair 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm - 210 gms) complete all as specified and directed.

S&F in repair vitreous china wash down water closet, pedestal pattern (EWC), white, with 'P' or 'S' trap, with PVC water closet seat, black or white, closed pattern, with flat bottom and cover and mild steel chromium plated or aluminised hinging device including taking down and removal of existing old water closet with seat cover, complete all as specified and directed.

S&F in repair 500 litres capacity rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position including dismantling old U/S existing tank, complete all as specified and directed.

M&L for welding repair works at small patches like hinges, door closer, window repair, steel door/gate fittings like hinge, bolts, bars etc all as directed by engr-in -charge.

S&F in repair ventian blinds, 1st quality with 100 mm wide flaps for windows (Vertical/Horizontal) using polyster for adjustable fabric pannels of any shade/colour as approved by Engineer in charge, including necessary installation of brackets, roller and mounting hardware for quick and easy installation, complete all as specified and directed.

Taking down carefully aluminium point wiring (light, Socket or power) complete including fittings and fixtures such as switches, ceiling roses, pendents, regulators, sockets etc for taking credit to be measured separately including making good the disturbed portion/surface complete all as specified and directed.

M&L for point wiring with colour coding multistranded copper conductor cable, PVC insulated and (FRLS) unsheathed size 1.5 sqmm with PVC concealed Conduit ( dia not les than 25 mm) with fixing accessories for one light /fan/bell point controlled by one switch with pressed steel concealed terminal boxes covered with 3mm thick laminated sheet incl. contineous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly all as specified and directed.

All as per item No 66 above but for one 3/5 pin socket 5 Amp on same board, with 1.5sqmm wire with 1.5sqmm earth wire.

All as per item No 66 above but for one 3/5 pin socket 5 Amp on independent board with 1.5sqmmwire with 1.5sqmm earth wire .

All as per item No 66 above but for 3 pins socket outlet 15 Amps independent with 4.0 sq mm incl contineous earthing with multistandred copper conductor PVC insulated unsheathed size 4.0 Sq mm complete all as specified and directed. Note:- (For item 66 to 69 ) Cost of making good disturbed surface below existing point wiring taken out vide item No 65 and cutting chases and making good of disturbed surfaces by cement & sand mortar (1:3) and surface finish as per adjustment surface conduit and all accessories as required for concealed point wiring vide item No 66 to 69 as applicable shall be deemed to be included in the unit rate quoted against these items.

M&L for point wiring with multistranded copper conductor cable, PVC insulated and unsheathed size 1.5 sqmm (FRLSH) drawn in and incl PVC casing and caping with fixing accessories for one light /fan point controlled by one switch with pressed steel concealed terminal boxes covered with 3 mm thick laminated sheet incl continous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly all as specified and directed.

All as per item No 70 above but for one 3/5 pin socket 5 Amp on same board.with 1.5 sqmm wire with 1.5sqmm earth wire

All as per item No 70 above but for one 3/5 pin socket 5 Amp on independent board.with 1.5 sqmm wire with 1.5sqmm earth wire .

All as per item No 70 above but for 3/5 pins socket outlet 15 Amps independent with 4.0 sqmm incl continous earthing with multistandred copper conductor PVC insulated unsheathed size 4.0 Sqmm complete all as specified and directed.

S&F switch piano flush type/Bell push, 5 Amps, single pole one way 230 Volts , AC complete all as specified and directed.

S&F socket 3/ 5 pins, 6 Amp, flush type piano (multi purpose) 230 Volts, AC complete all as specified and directed.

S&F Socket 15 Amps flush type,3/ 6 Pin, 230 Volts , AC complete all as specified and directed.

S&F switch 15 Amps flush type 230 Volts , AC complete all as specified and directed.

S&F Modular switch flush type, 5/6 Amps, single pole one module white colour 230 Volts , AC complete all as specified and directed.

S&F Modular switch flush type, 15/16 Amps, single pole one module white colour 230 Volts , AC complete all as specified and directed.

S&F Modular socket 3 pins combined, 5/6 Amp, flush type (multi purpose) two module ,230 Volts , AC complete all as specified and directed.

S&F Modular socket 5 /6 pins combined, 15A/16 Amp, flush type(multi purpose) two module 230 Volts , AC complete all as specified and directed.

S&F Modular white cover plate with frame suitable for three module way 230 Volts , AC complete all as specified and directed.

S&F Modular white cover plate with frame suitable for four module way 230 Volts , AC complete all as specified and directed.

S&F Modular white cover plate with frame suitable for six module way 230 Volts , AC complete all as specified and directed.

S&F Ding Dong door bell 230 Volts , AC complete all as specified and directed.

S&F Bell push flush type 5 Amps, single pole one way 230 Volts , AC complete all as specified and directed.

S&F Modular Bell push flush type 5 Amps, single pole one way 230 Volts , AC complete all as specified and directed.

S&F ceiling rose, PVC / Polycarbonate isolated body ,surface backlite, 65x50mm, three terminals, 230 Volts , AC complete all as specified and directed.

S&F modular stepped type electronic fan regulator flush type,2-way 230 Volts , AC complete all as specified and directed.

S&F stepped type electronic fan regulator flush type 230 Volts , AC complete all as specified and directed.

S&F Batten holder PVC/Polycarbonate base / back suitable for LED lamp. 230 Volts , AC complete all as specified and directed.

S&F LED Bulbs 9/10W B-22 Pin type 230 Volts , AC complete all as specified and directed.

S& F PVC Combination Box type complete with switch & socket 5/6 Amp ,230 Volts , AC complete all as specified and directed.

S& F PVC Combination Box type complete with switch & socket 15/16 Amp. 230 Volts , AC complete all as specified and directed.

S&F plug top of 16 Amp, 3 Pin 230 Volts , AC complete all as specified and directed.

S&F plug top of 05 Amp, 3 Pin 230 Volts , AC complete all as specified and directed.

S&F AC plug to of 20 Amp, 3 Pin suitable for AC Box (sheet metal enclosure with a two pin and earth plug and socket ) 230 Volts , AC complete all as specified and directed.

S&F AC socket of 20 Amp, 3 Pin suitable for AC Box (sheet metal enclosure with a two pin and earth plug and socket ) 230 Volts , AC complete all as specified and directed.

S&F single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole 20 amps MCB complete all as specified and directed.

S&F Skylite recess mounting,36W, LED 2'x2' luminaire integrated electronic driver, optics diffused, complete including electrical connection with copper cable from ceiling rose to fittings and taking down old Unserviceable light fittings of any type and any size complete all as specified and directed.

S&F LED tube light fittings 20W (4 feet) wall mounted LED batten extruded PVC heat sink provided for efficient heat dissipation & integrated electronic driver optics diffused complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings complete all as specified and directed.

S&F LED 6000K (2’ feet), 10W Decorative LED lighting fixture with extruded PVC . heat sink, environmental friendly, energy efficient ready to use pack, complete and including taking down existing fittings complete all as specified and directed.

S&F LED bulkhead luminaire 10W decorative type as per sample complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings complete all as specified and directed.

S&F LED building secuity light 25 watt made up of pressure die cast aluminium housing with mid power LED as lightening source and PC cover having top opening inbuilt LED driver with IP66 protection and impact resistance of IK-07 complete including GI bracket with nut bolts, washers etc including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings complete all as specified and directed.

M&L for submain wiring with 2X6.0 SQMM+1X6.0SQMM Earth Wire single core PVC insulated FRLSH sheathed copper cable connecting to common earth dolly in and including heavy duty PVC casing caping and dismantling and taking down existing unserviceable wiring, all accessories complete all as specified and directed.

M&L for submain wiring with 2X6.0 SQMM+1X6.0SQMM Earth Wire single core PVC insulated FRLS sheathed copper cable connecting to common earth dolly in and including heavy duty PVC concealed Conduit and dismantling and taking down existing unserviceable wiring, all accessories complete all as specified and directed. Note:- Cost of making good disturbed surface below existing point wiring taken out vide item No 35 and cutting chases and making good of disturbed surfaces by cement & sand mortar (1:3) and surface finish as per adjustment surface conduit and all accessories as required for concealed point wiring vide item No 105 to 106 as applicable shall be deemed to be included in the unit rate quoted against these items.

S&F in repairs VTPN 4 way double door prewired distribution board TPN-DPX 125 MCCB including one No MCCB 125 Amps, 25 kA, 4 pole as incomer and suitable SPN/TP MCBs as outgoing double door type sheet metal enclosure 415V with 200 Amps rated standard busbar of suitable size plate and common neutral link without MCBs with blank plate suitable for 4 way complete and including taking down VTPN DB's, complete all as specified and all as directed.

S&F in repairs Distribution board 4 way TP&N Double Door are fitted with Bus Bars, Neutral Links suitable for 415V, 50Hz, Blanking Plates, Suitable for TP/FP MCB complete all as specified and all as directed.

S&F in repairs single pole and neutral sheet metal enclosures for Distribution board (DB's)suitable for MCBs fitted with bus bar , Neutral link ,Earth Bar and Din rail 240 V, 50 Hz supply double door SP&N DB system 12 ways complete all as specified and all as directed.

All as per item No 109 above but 8 ways

All as per item No 109 above but 4 ways

S&F MCB TPN 63 to 100 AMPS Amps 415V incl all termnials, fitting etc including taking down, complete all as specified and all as directed.

S&F MCB SPN 40-63 Amps 240V incl all termnials, fitting etc. including taking down, complete all as specified and all as directed.

S&F MCB SP 06 to 40 Amps 240V incl all termnials, fitting etc including taking down, complete all as specified and all as directed.

M&L for rewinding of exhaust fan of size 250 to 600 mm sweep Including Taking down ,dismantiling, opening ,descaling, adjustment, re fixing , cleaning, greasing, painting, replacing minor spares (ie nut, bolt,washers) and rewinding with proper size enamelled copper wire warnishing, complete all as specified and directed. (Note:- spare parts mentioned here in after from item No 116 to 119 shall be measured and paid separatelly)

Suupply only Ball bearing complete all as specified and directed.

Supply only Brass bushes complete all as specified and directed.

Supply only Exhaust fan louvers complete with nut & bolts etc complete all as specified and directed.

Supply only Exhaust fan blade of any sweep with screws/bolts, nuts complete all as specified and directed.

M&L for servicing,Taking down Ceiling fan , Air circulator & wall mounted fans any size and any sweep removing cleaning of dust, properly cleaning greasing of bearing including replacing and connecting up, complete all as specified and all as directed.

M&L for rewinding of Ceiling fan , Air circulator & wall mounted fans of any size any sweep and any capacity of fans using super enameled copper conductor of suitable gauge including insulation varnishing, packing including taking down and refixing the fans in original position , complete all as specified and all as directed. (Note:- spare parts mentioned here in after from item No 122 to 124 shall be measured and paid separatelly)

Supply only Ball bearing complete all as specified and directed.

Supply only Brass bushes complete all as specified and directed.

Supply only 2.5 to 4.0 mfd capacitor complete all as specified and directed.

Taking down Geyser of any size and capacity after disconnecting all electrical and water connections, dismantling of geyser for checking of unserviceable parts, repair/replacement of worn out parts, reassembling, testing, cleanig with chemical to clear choking due to scaling and refixing in its original location incl making all necessary electrical & water connections complete all as specified and directed. (Note:- spare parts mentioned here in after from item No 122 to 124 shall be measured and paid separatelly)

Suply only Geyser Element Tringular type 1.5 KW complete all as specified and directed.

Supply only Geyser thermostate for1.5 KW complete all as specified and directed.

M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.3 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised means of earth wire 4 mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 15 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point all as specified and indicated including all earth work excavation, returning filling and disposal of surplus soil and testing on completion, complete all as specified and directed.

J P Enterprises (BID ID -3302768)

36SHRI RADHEY ASSOCIATES (BID ID -3302675)

MAA BHAWANI CONSTRUCTION (BID ID -3300720)

SAGAR ENTERPRISES (BID ID -3302826)

M/S Yamin (BID ID -3300467)

NAVEEN KUMAR TYAGI (BID ID -3302108)