Construction of Gram Panchayat office Building at Dharampur, District Solan (H.P)

Amount

Cutting in earth work in all kinds of soil such as pick jumper, blasting/ chiseling/wedging out hard/soft rock and disposal of excavated earth in all leads and lifts as per direction of Engineer in charge and stacking of useful stones to specified dimention.

( Pick + jumper work 50% each)

Disposal of excavated earth including loading unloading of all surplus excavated eart through manually and mechanically means within 1.00 K.M periphery on approved dumping site as directed by the Engineer-in Charge.

Excavation in foundation trenches etc. in earth work in all kinds of soil such as pick work ,pick jumper work , jumper blasting work , soft and hard blasting ,saturated soil , including chiseling or any other mixed variety of soil in all leads dewatering and or removal of slush and other incidentals , including stacking the excavated soil clear from the edge of excavation and than returning the stacked soil in all thickness of layers when required into plinths side of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed by the Engineer-in- charge with in all leads , lifts and other incidentals complete in all respect .

Providing form work with steel plates 3.15 mm (three decimal fifteen millimeter ) thick welded with angle iron in frame 30X30X5 mm (thirty into thirty into five millimeters )so as to give a fair finish including centering , shuttering ,strutting and propping etc. with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling & removal of same for in-situ reinforced concrete and plain concrete work in .

Foundation ,footing basis of columns etc. And mass concrete as per direction of the Engineer-in-charge including carriage of material with in all leads , lifts in all floor levels and other incidentalscomplete in all respect .

Columns, pillars ,posts and struts square, rectangular or polygonal in plan as per direction of the Engineer-in Charge Inculdings carriage of material with in all leads ,lifts in all floor levels and other incidentals complete in all respect .

Rectangular column

Beams cantilever girders and lintels side and soffits of beams ,beams haunchings, cantilevers ,bressumers and lintels any depth in all heights from floor as per direction of the Engineer-in Charge including carriage of material with in all leads ,lifts in all floor levels and other incidentalscomplete in all respect .

Flat surfaces, such as soffits of the suspended floors roofs , landing and the like floors etc. up to any thickness , all as per direction of the Engineer-in Charge including s carriage of material with in all leads ,lifts in all floor levels and other incidentals complete in all respect .

Stair cases with sloping or stepped soffits excluding landing.

Vertical fins and vertical sun breakers.

Cornices and mouldings on edges of slab Porch portion.

Providing and laying, mechanically mixed and vibrated cement concrete 1:6:12 1 cement 6 sand 12 graded crushed stone aggregate 40 mm nominal size) including curing as required at site complete excluding the cost of form work but including all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge.

Providing and laying cementconcrete 1:5:10 (1 cement : 5 Sand:10 graded stone aggregate 40mmnominal size) and curing completeexcluding the cost of form workin: Foundation and plinth.

Providing and laying cementconcrete 1:4:8 (1 cement : 4 sand :8 Graded stone aggregate 25mmnominal size) and curing completeexcluding cost of form work infoundation and plinth in breast andretaining walls etc

Providing and laying cement concrete 1:1½:3 (one cement:one and half sand :3 graded crushed stone aggregate 20 mm (twenty millimeter) nominal size) mechanically mixed and vibrated graded crushed stone aggregate 20mm nominal size and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in :-

Foundation ,footing basis of columns etc and mass concrete as per direction of the Engineer-in-charge including carriage of material with in all leads , lifts and other incidentals complete in all respect.

Column , pillars , posts and structs as per direction of the Engineer-in Charge including carriage of material with in all leads and lifts and other incidentals complete in all respect.

Suspended Floors , roofs , landings shelves and their supports , balconies beams ,girders, bressumers and cantilever for all floors levels , complete as per direction of the Engineer-in Charge including carriage of material with in all leads ,lifts and other incidentals complete in all respect.

Stair cases (except spiral stair case) excluding landing but including preparing of the surface and finishing of nosing upto floor two level.

wall any thickness but not less than 0.1m thickness attached pilasters, buttreses, plinth and string courses etc. from top of foundation level u to floor to level

Providing tor steel reinforcement of TATA or SAIL make for reinforced Cement concrete work including bending, binding and placing in position and cost of binding wire complete for all floors including carriage of material with in all leads and lifts and other incidentals, complete in all respect.

Boulder filling dry handpacked tightly as in wirecrate apron bund (wire cratesto be measured separately)

Brick work using 2nd Class common burnt clay building bricks, in cement mortar 1:6( 1 cement 6 sand ) in super structure upto all floor levels including carriage of material with in all leads lifts and other incidentals, complete in all respect.

Half bricks masonry using second class common burnt clay building bricks in cement mortar 1:4(one cement :four sand )in super structure up to all floor levels including carriage of material with in all leads , lifts and other incidentals .

Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement :6 sand : 12 graded stone aggregate 20mm nominal size) at plinth level in cement mortar 1:6( 1 cement : 6 Sand).

Stone filling behind R/wall.

Cement concrete flooring 1:2:4 (1cement : 2 sand:4 graded stoneaggregate 20 mm nominal size)laidin one layer finished with afloating coat of neat Cement 40 mm thick..

Providing weep holes in brick masonry/ stone masonry/ plain reinforced concrete abutment, wing wall/ retaining wall with 100 mm dia PVC pipe extending through the full width of the structure.

Filling in plinth with sand under floorsincluding watering, ramming, consolidating and dressing complete.

Providing wood work in frames of doors ,windows , clerestory, windows and other frames wrought, framed and fixed in position of sal wood including carriage of material with in all leads , lifts and other incidentals, complete in all respect.

Providing wood work in frames of false ceiling partitions etc. sawn and put-up in position in second class Kail wood including carriage of materials in all leads and lifts complete.

Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws. 2nd class deodar wood 40 mm thick.

Providing and fixing wire gauge shutters using galvanized M.S wire gauge of I.S gauge designation 85 G with wire of dis 0.56 mm for doors, windows and clerestry enamelled iron hinges with necessary screws including carriage of materials in all leads and lifts complete.

Providing and fixing glass panes with deodar wood beading and nails etc. complete. Plain Glass: 5 mm thick.

1201000000 Providing and fixing flush door shutters interior grade, commercialtype, core of black-board construction with frame of first class hard wood and well matched commercial ply veneering with vertical grains of cross bands andface veneers on both faces ofshutters. 1201001000 40 mm thick including black enamelled M.S. butt hinges.

Providing 40 X 3 mm flat iron hold fast 40cm(forty centimeter) long including fixing to frame with 10mm(ten millimeter) diameter bolts & nuts and wooden plugs and embedding in cement concrete block 30 X 10 X 15 cm (thirty into ten into fifteen centimeter) 1:3:6 (one cement :three sand :six graded stone aggregate 20 mm nominal size), complete in all respect.

Providing and fixing 75 mm x 60mm rounded hand rails in straigh tlength complete in. 1209001000 1st class indian teak wood. Metre

Providing and fixing 75 mm x 60 mm caps turned to match the hand rails and mitred in including hand rails screws and dowels(dia of cap to be twice the width of hand rail) 1209301000 1st class indian teak wood.

Providing and fixing bright finished brasssliding door-bolts with nuts andscrews etc. complete.

Providing fixing bright finishedbrass tower bolts (barrel type) withscrews etc. omplete

200mmX10 mm

150mmX10 mm

Providing and fixing bright finished brass handles with screws etc. complete

Providing and fixing 100mm brightfinished brass floor door stopperwith rubber cushion screws etc. tosuit shutter thickness complete

Providing and fixing bright finished brass 100mm. Mortice latch and lock and a pair of levers, handles with necessary screws etc. complete (indian make of approved quality)

Providing and fixing brightfinished brass casement windowfastner with necessary screws etc.complete

P/F partical board ceiling ofapproved quality with butt jointingand nail (frame work and coverfillets to be paid for separately

Providing and fixing wooden plankceiling with tongued and groovedjointing and wood screws (framework and cover fillets to bemeasured and paid for separately)12mm thick

Providing and fixing water proof kitply of standard quality ISI mark and approved shade and colour inpanelling & wall linning i/c mitring at junctions, butt jointing and nails complete (Frame work for base to be measured & paid for separately)

Providing and fixing plain liningwith tongued and groved jointingand screws (frame work and coverfillets to be measured and paid forseparately with.12mm.

Providing and laying Kota stone slab flooring 25mm (twenty five milimeter) thick over 20 mm (average) thick base of cement mortor 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as per pattern approved by Engineer -in -charge including carriage of material with in all leads & lifts complete in all respect.

Kota stone slab 25 mm thick in risers of steps, skirting dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement :3 sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete including carriage of materials in all leads and lifts and upto all floor levels as per direction and to the entire satisfaction of Engineer-in- Charge.

Providing and fixing 10mm thick antiskid water proof stain and impectresistent heavy duty vetrified tilesNitco or equivalant600x600mmx10mm manufactured ofapproved shade and colour inflooring, treads of steps and landingslaid over 12mm thick cement mortar1:3 (1 cement : 3 sand) jointed withcement slurry mixed with pigment tomatch the shade of tiles as requiredcomplete.

Providing and laying spartic ceremic tiles 5.5 / 6.00 mm.thick in flooring (300 x 300mm. size)treads of steps laid on a bed of 12mm. thick cement mortar 1:3(1cement: 3 sand) finished with flush pointing in white cement.

Providing and laying Duro stonevetrified tiles (300x300mmx8mm) ingrey/coloured of required shade inskirting risers of steps and dados on12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointedwith neat cement slurry finished withflush pointing in white cement mixedwith pigment of required shade tomatch the shade of tiles complete.

Providing and laying granite stone in flooring 20mm(average)thicknessbase of cement mortar 1:3(1cement:3 sand) laid over and jointed withgrey cement slurry mixed with pigment to match the shade ofgranite stone i/c rubbing andpolishing complete.20mm.thick

Providing and fixing 0.60mm thick prepainted steel sheet in roofing withhot dipped metallic zinc coated sheetwith top coat of regular modifiedpolyster (RNP) organic coating of 20microns over 5 microns primercoating to back coat of polyster of 5 microns over 5 microns primercoating i/c fixing with prepainted iron Jor L hooks, bolts and nuts 6mm diametre with prepainted limpet andrubber washers complete with allaccesoriees as required as per the direction of Engineer-in-charge.

Providing and fixing ridges or hips 60cm overall with 0.60mm thickprepainted steel sheets in roofing withhot dipped metalic zinc coated sheetswith top coat of regular modifiedpolyster organic coating of 20 micronsover 5 microns primer coating + back coat of polyster of 5 microns over 5microns primer coating i/c fixing withprepainted iron J or L hooks, bolts &nuts 6mm dia & prepainted G.I. limpetand bitumen washers complete withall accessories as required as per thedirection of Engineer in Charges.

Providing and fixing valley 60 cmoverall 0.60mm thick prepainted steelsheet in roofing with hot dippedmetalic zinc coated sheet with topcoat of regular modified polyster organic coating of back coat ofpolyster of 5 microns over 5 micronsprimer coating i/c fixing withprepainted iron J or L hooks, bolts andnuts 6mm dia with prepainted .I.limpet and bitumen washers ompletewith all accessories as required as per the direction of Engineer-in-charge.

Providing and fixing flushing 38cmoverall with 0.60mm thick prepaintedsheet in oofing with hot dippedmetalic zinc coated sheet with topcoat of regular modified olysterorganic coating of 20 microns over 5microns primer coating + back coat polyster of 5 microns over 5 micronsprimer coating i/c fixing withprepainted iron J or L hooks, bolts andnuts 6mm dia meter & prepainted G.I.limpet & bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge

Providing and fixing 15 cm.wide 45 cm. overall semicircularplain G.I. sheetgutter with ironbrackets 40x3mm size bolts andnuts and washers etc. includingmaking necessary conections withrain water pipe complete as perdesign.

Providing and fixing M.S. BP Sheet1.66mm to 2mm thick in vesboard/facia/soffits/ceiling includingcutting, fixing and welding to steelroof members and applying a coat ofred lead primer complete as per theinstruction of Engineer-in-charge(Base members of steel work shall bemeasured & paid separtely)

Providing and fixing on wall faceC.I.rain water pipes includingfilling the joints with spun yarnand cement mortar 1:2 (1 cement :2sand)

Providing and fixing PVC clamps ISI markedof approved design with steel screws and rawal plugs etc. complete.

Providing and fixing PVC plain bend ISImarked including fixing with approvedadhesive etc. complete.Providing and fixing PVC reducer ISI markedincluding jointing with approved adhesive etc.complete.

Steel work bolted in built upsections,including cutting ,hoisting ,fixing in position and applying a priming coat of red leadpaint.in trusses and trussed purlins in building

in gratings framed guard bars ladders railing brackets etc.

Providing and fixing M.S. grills ofrequired patterns in wooden framesof windows etc. withM.S. Flats, square or round barswith round headed bolts and nuts orby screws.1207201000 Plain grill.

Supplying and fixing rollingshutters of approved make made of80 mm X 1.25mm M.S lathsinterlocked together through theirentire length and joined togetherat the end by end locks mounted onspecially designed pipe shaft,withbrackets side guides and arrangements for inside and outsidelocking with push pull operationcomplete but excluding the cost ofthe top cover and spring.1510010000 Shutters having width below 3.5metres. s

Providing and fixing top cover forrolling shutters.width 3.5 mtr.

Providing and fixing ball bearing for rolling shutter

Providing and fixing in position collapsible steel shutters with vertical channels 20 mm X10 mmX2mmand braced with flat iron diagonals20 mm X5 mm size with top and bottom rails of T.iron 40 mm X40 mmX6 mm with 38 mm dia steel pulleycomplete with bolts and nuts locking arrangements,stoppers,handles,including applyinga priming coat of red lead paint.

Providing and fixing M.S. single acting spring hingesbright finished with necessary screws etc. complete.

Painting two coats (excluding priming coat )on new steel and other metal surface with enamel paint other then white brushing to give an even shade including cleaning surface of all dirt dust and other foreign matter including entire carriage of material with in all lead lifts and other incidentals

Applying priming coat on new wood and wood based surfaces with ready mix paint brushing wood pink primer after and including preparing he surfaces by thoroughly cleaning oil grease dirt an other foreign matter sand papering and knotting etc complete including carriage of material with in all leads and lifts.

Painting two coats (excluding priming coat) on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of dirt dust and other foreign matter send papering and stopping with enamel paint other than white including carriage of material with in all leads and lifts

Extra coat over every subsiquent coat of paint.

Polishing two coats with malaminepolish of required shade on newwood and wood based surfaces togive an even surface includingcleaning the surface of all dirt, dust and sand papered smooth andincluding a coat of wood filler.

Applying priming coat on newconcrete/masonry/asbestoscement/plastered surfaces after andincluding preparing the surface bythoroughly cleaning oil,grease,dirtand other foreign matter and sandpapering as required with Readymixed primer

6mm thick cement plaster to ceiling in cement mortar 1:3 (one cement :three sand) as per direction of Engineer-in- charge including carriage of material with In all leads , lifts in all floors and other incidentals completes

15mm thick cement plaster in single coat on rough / fair side of brick /concrete/stone wall for interior / exterior plastering for all floors including arises internal rounded angles chafers and / or rounded angles chamfers and/ or rounded angles not exceeding 80mm (eighty millimeters )In girth and finished even and smooth in cement mortar 1:6 (one cement :six sand )as per direction of engineer in charge including carriage of material within all leads lifts in all floors and other incidental

20mm Cement plaster in singlecoat on rough side ofbrick/stone masonry forinterior plastering upto floortwo level includingarrises,internal roundedangles,chamfers and/or roundedangles not exceeding 80mm ingirth and finished even andsmooth.with CM 1:5

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of material with in all leads and lifts.

Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/ stone/ plastered wall surfaces to give an even shade including t horoughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for making the surface smooth.

Finishing wall with weather proof exterior grade emulsion of approved design (apexultima) or its equarlied on udecorated wall surfaces (Two Coats )to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt, dust and other foreign matters etc. including sand paper smooth complete including carriage of material with in all leads and lifts.

Providing plinth protection 50mm thick in cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded stone aggregated 20mm nominal size)

Providing and filling cinder in the sunken portion of toilets to the required level of toilet including watering ramming and carriage of material in all leads and lifts complete

Providing and laying four courseswater proofing treatment withbitumen felt over roofs consistingof first and third ourses of blownor / and residual bitumen appliedhot at 1.45 kg per sq .m of areafor each course second course ofroofing felt type 3 grade 1(hessian base self finished bitumenfelt) and fourth and final courseof stone grit 6 mm and down size orpea sized gravel spread at 6 cu.dmor 0.006 cu.m) per sq.m. including preperation of surface excludinggrading complete s

Moulded jambs and heads,straight mouldings and plainarches or domes. 10 Cud.M

Providing under layer forplinth protection of 75mmthick (unconsolidated) bed drybrick/stone aggregated 40mmnominalsize with rammed andconsolidated and outed withfine sand includingpreparation of ground.

Constructing Course rubblehammer dressed 'U' shape opensurface drain with side all. 15x22 cm in cement mortar 1:6(1 Cement : 6 Sand) and insideplastring with cementplaster1:3 (1 Cement:3 Sand)including earth work andlaying 10 cm cement concretein 1:5:10 (1 Cement : 5 Sand :10 graded stone aggregate) of40 mm nominal size) and 7.5 cmcement concrete 1:2:4 (1Cement : 2 Sand : 4 Gradedstone aggregate of 20 mmnominal size) and finishedwith a floating coat of neatcement complete as perstandard design.

Supplying PVC cover light duty rectangular 455x610 mm from height 38.00kg. (single seat)

Providing and fixing to wall ceiling and floor gal vanished mild steel tubes (medium grade) tube fitting and clamps including making good the wall and ceiling and floor complete including carriage of material upto all leads in all floors

15 mm (fifteen millimeters) nominal bore

20 mm (twenty millimeters) nominal bore

Providing and laying in trenches, galvanisedmild steel tubes (heavy grade), tube ittings (earth work in trenches to be measured andpaid separately) :-

Providing and fixing high pressure PVC spigotand socket, waste and ventilating pipes ISImarked including fixing with approvedadhesive etc. complete.

110 mm dia

75mm dia

Providing and fixing PVC single equal branchwith oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nutscomplete including fixing with provedadhesive etc. complete.

75mm dia

110mmdia

Providing and fixing PVC door bend with ovalaccess door, insertion rubber washer 3 mm thick bolts and nuts ISI marked completeincluding fixing with approved adhesive etc. complete.

75mm dia

110mmdia

Providing and fixing PVC single equal branchplain ISI marked including fixing with approved adhesive etc. complete.

75mm dia

110mmdia

Providing and fixing (Phinolix or equivalent) PVC collars ISI marked including fixing with approved adhesive etc. complete.

75 MM (Seventy five millimeters Dia )

110 MM (one hundred ten millimeter Dia )

Providing and fixing (Phinolix or equivalent) PVC plain bend ISI marked including fixing with approved adhesive etc. complete

75 MM (Seventy five millimeters Dia )

110 MM (one hundred ten millimeter Dia )

Providing and fixing PVC double equal branchwith oval access door, insertion rubber washer3 mm thick bolts and nuts ISI markedcomplete including fixing with approvedadhesive etc. complete.

75 MM (Seventy five millimeters Dia )

110 MM (one hundred ten millimeter Dia )

Providing and fixing PVC plain double equalbranch ISI marked including fixing with approved adhesive etc. complete.

75 MM (Seventy five millimeters Dia )

110 MM (one hundred ten millimeter Dia )

Providing and fixing PVC clamps ISI markedof approved design with steel screws andrawal plugs etc. complete.

75 MM (Seventy five millimeters Dia )

110 MM (one hundred ten millimeter Dia )

Providing and fixing PVC “Y" junction with ovalaccess door, insertion rubber washer 3 mmthick bolts and nuts ISI marked completeincluding fixing with approved adhesive etc.complete.

75 MM (Seventy five millimeters Dia )

110 MM (one hundred ten millimeter Dia )

Providing and fixing PVC plain “Y" junction ISImarked including fixing with approvedadhesive etc. complete.

75mm dia

110 MM (one hundred ten millimeter Dia )

Providing and fixing PVC P/S trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete 110 MM including carriage of material upto all leads and lifts in all floor

150mm dia

110MM (one hundred ten millimeter Dia )

Providing and fixing PVC reducer ISI markedincluding jointing with approved adhesive etc.complete.

150mm dia

110MM (one hundred ten millimeter Dia )

Providing and fixing stainless steel kitchensink of approved standard ISI make with drainboard and C.P. waste with C.I. or M.S.Brackets painted white ncluding cutting holesand making good the same but excludingfitting

i) 610 x 510 mm with bowl depth 200 mm

Providing and fixing vitreous china wash down water closet squatting pan (Indian type W.C. pan) of Cera , Hindware or equvalent)of size 580mm (earth work bed concrete, trap to be measured and paid for seprately . Orissa pattern

Providing and fixing vitreous China washdown, water closet (European type. W.C. pan)with integral 'P' or 'S' trap including jointing thetrap with soil pipe in cement mortar 1:1(1cement : 1 sand) (Seat and over to bemeasured and paid for separately):-Angle Indian Universal closet

Providing and fixing 10.0/12.50/15.00 litresvitreous China low level flushing cistern with apair of C.I. or mild steel brackets, completewith fitting such as lead valve less syphon,15mm nominal size brass ball valve withpolythene float, C.P. Brass handle, unions andcouplings for connections with inlet, outlet andoverflow pipes, 40mm dia C.P. flush bendincluding cutting holes in walls and makinggood the same and connecting the flush bendwith cistern and closet (overflow pipe to bemeasured and paid for separately).

Providing and fixing G.I. Inlet connection for flush pipe with W.C. Pan.

Providing and fixing plastic seat (Solid / Hollowtype) and cover for wash down water closetwith C.P. Brass hinges and rubber buffers :coloured

Providing and fixing vitreous China bowlpattern urinal including connection the urinalwith waste pipe by means of white lead mixedwith chopped hemp (waste pipe to bemeasured and paid for separately. :

providing and fixing automatic flushing cisternwith a pair of C.I. Or M.S. brackets completewith fittings including C.I. Syphonic apparatus,mosquito proof lid, C.P. Brass unions andcoupling for connections with inlet, outlet andoverflow pipes including cutting holes andmaking good the same (overflow pipe to bemeasured and paid for separately) :-5 litres capacity.

Providing and fixing C.P. brass flush pipe /spreaders for urinal with fitting such as unions,clamps etc. (all in C.P. Brass) including cuttingholes and making good the same :15mm

Providing and fixing vitreous China wash basin with single hole for pillar tap with C.I. or M.S.brackets painted white including cutting holesand making good the same but excludingfittings:-

Providing and fixing C.P. Brass waste for wash basin or sink :-32mm dia

Providing and fixing M.I. Union for wash basin or sink :-32mm

Providing and fixing 600 mmx 450 mm ( six hundred into four hundred fifty millimeters) beveled edge mirror of superior glass mounted on 6 mm (six millimeters) thick A.C sheet or plywood sheet and fixing to wooden plugs with chromium plated brass screws and washers complete including carriage of material upto all leads and lifts in all floors

Providing and fixing C.P. Brass Towel railcomplete with C.P. Brass brackets fixed towooden plugs with C.P. Brass screws :-750mmx20mm

(i)Providing and fixing 600mm x 120 mm glassshelf with C.P. Brass bracket and guard railcomplete, fixed to wooden plugs with C.P.Brass screws.

Providing and fixing toilet papers holders chromium plated brass complete including carriage of material upto all leads and lifts in all floors

Providing and fixing chromium plated brasssoap dish with C.P. Brass brackets fixed towooden cleats with C.P. Brass screws :-

Providing and fixing Division Plate for Urinals 600mmx300 mm

Providing and fixing brass bib tap (Superior or heavy type) :15mm

Providing and fixing Brass stop cocks :15mm

Providing and fixing C.P. brass angle valve 15mm without Nuts and pipe.

Providing and fixing 15mm mixer for kitchen sink with top / bottom swinging spout.

Providing and fixing one hole basin mixing Faucet.

Providing and fixing P.V.C connection with brass unions :-

15mm nominal bore

20 mm nominal

Providing and fixing brass full way valve with wheel:-

15mm nominal bore

20 mm nominal

Providing and fixing G.I./M.I Union of following sizes (where not included in the items .

15mm nominal bore

20 mm nominal

Providing and fixing PVC water storage tank of Sintex or equvalent make of ISI :12701 Marked ,G.I. inlet and outlet connection , 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground Level (2000 litres net capacity tank)including carriage of material upto all leads and lifts in all floor

Providing and fixing PVC floor trap ISI markedof self cleaning design including fixing withapproved adhesive, cost of cutting and makinggood the wall and floors etc. complete

110mmx75mm

Providing and laying (to level or slopes) andjointing with stiff mixture of ement mortar inthe proportion of 1:1 (1 cement : 1 sand) saltglazed stoneware pipes grade 'A' of thefollowing internal diameters including testing ofpipes and joints complete:

Providing and laying cement concrete 1:5:10(1 Cement: 5 Sand :10 graded stone aggregate 40mm nominal size ) bedding forstoneware pipes of the following internaldiameters, necessary form work and curingcomplete :

Providing and laying cement concrete 1:4:8 (1Cement : 4 Sand : 8 graded stone aggregate40mm nominal size ) bedding for stonewarepipes of the following internal diameters,necessary form work and curing complete :

Providing and fixing stoneware gully trapgrade 'A' complete with C.I grating, brickmasonry chamber in cement mortar 1:5and water tight C. I. cover with frame of300mmx300mm size (inside) the weightof cover to be not less than 4.53kg andframe to be not less than 2.72kg.

(a) Square Mouth Traps: 180mmx100mm size

Constructing manhole with R.C.C top slab in1:2:4 mix in 1 cement : 2 sand : 4 gradedstone aggregate 20mm nominal size)foundation concrete1:4:8 (1cement : 4 sand :8 graded stone aggregate 40mm nominalsize) inside plastering 15mm thick with cementmortar 1:3 (1cement 3 sand) finished with afloating coat of neat cement and makingchannels in concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mmnominal size) finished smooth complete including curing and testing:

Inside size 800mm x 800mm and 500mmdeep including C.I cover with frame. (Light duty single seal pattern - 1) 455mmx610mm internal dimensions total weight of cover and frame to be not lessthan 38kg. (Weight of cover 23 kg and weight of frame 15 kg.)(a) With 200mm thick walls of brick masonryusing common burnt clay building bricksin cement mortar 1:3 (1 cement : 3

Constructing brick masonry arched typemanhole 1400mm x 900mm inside size at bottom up to crown of the arch and 600mm x900mm inside size above crown of the archwith common burnt clay building bricks laid incement mortar 1:3 (1 cement : 3 sand ) archwork with common burnt clay building bricks incement mortar 1:4 (1 cement : 4 sand) insidecement plaster 15mm thick with cement mortar 1:3 (1 cement : 3 sand ) with a floatingcoat of neat cement upto the height of thecrown level of arch above the benching leveland pointing with cement mortar 1:3 (1cement: 3 sand) for the remaining portionR.C.C. top slab 1:2:4 mix (1 cement : 2 sand :4 graded stone aggregate 20 mm nominalsize) foundation concrete 1:4:8 (1 cement : 4sand : 8 graded stone aggregate 40mm nominal size), and making channels in cementconcrete 1:2:4 mix (1 cement : 2 sand :graded stone aggregate 20mm nominal size)finished smooth complete including curing andtesting.With C.I. cover and frame (medium duty)500mm internal diameter total weight ofcover and frame to be not less than116kg (weight of cover 58kg. and, weight(a) 2.50 metre deep manhole

Making connections of drain or sewer line withexisting manhole including breaking into andmaking good the walls, floors with cementconcrete 1:2:4 (1 cement : 2 sand : 4 gradedstone aggregate 20mm nominal ize)cementplastered on both sides with cement mortar1:3 (1cement : 3 sand) finished with a floating coat of neat cement and making necessarychannels with cement concrete 1:2;4 (1cement : 2 sand : 4 graded stone aggregate20mm nominal size ) for the drain complete

for pipe 100 mm to 150mm internal diameter/ nominal size.

Smoke testing of soil or ventilating pipes (newor old) any height or diameter together withthe length of drain connecting the soil pipewith the nearest manhole (including use of ladders)

Bhumesh Singla