Construction of C.C. Road including construction of drain in Village- Dankaur Dehat, YEA WC-06

Excavation in foundation in ordinary soil (loam,clay or sand ) including lift upto 1.50m and lead upto 30m & including filling watering & ramming of excavated earth into trenches or into the space between the building and the sides of foundation trenches or into the plinth & removal & disposal of surplus earth as directed by the engineer in charge upto a distance of 30m from the foundation trenches

Cement Concrete with 4 cm gauge approved stone ballast coarse sand & cement in the proportion of 8:4:1 including supply of all materials labour tools & plants etc reguired for proper complection of the work

Providing and laying design mix cement concrete of M-30 grade in roads/taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required laying at site, spreading and compacting mechanically by using needle and surfave vibrator, levelling to required slope/camber finishing with required texture, including steel form work with study M.S. channel section, curing, making provision construction for & contraction/expansion, longitudinal joints (10mm wide x 50 mm deep by groove cutting machine providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/tie bars to be paid separately). Note-Cement content considered in M-30 is @340 kg/cum Excess/less cement Used as per design mix is payable/ recoverable sepearately Cement concrete prepared with batch mixing machine

M-150 brick work in 1:4 cement & Course sand 150 in foundation and plinth including supply of all materials labour complection of the work compiation of work

12mm Cement Plaster of mix 1:6 (1 cement : 6 coarse sand)

Cement Concrete with 4cm gauge approved stone ballast corse sand and cement in the propertion of 4:2:1 including supply of all material labour tools and plants etc required for proper completion of the work. Same as above item no.279 but with 2cm gauge stone grit in stend of 4cm gauge stone lallast. UP PWD SOR-2020/DAR-18/279a

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. (DAR/10.25.2/Based on UPPWD/SOR-2020))

Earth work in cutting or embankment In ordinary soil excavation to be in the form of regular pits not excedding 0.50m in depth and earth work in embankment to be in 20cm. Layers including rerming the surface to required levels and slope and also including 1.50m lift and 30m lead. the earth from cutting to be used in making embankment or to be deposited as spoil banks with in 30mtr distance as direct by the engineer incharge. excluding rolyality. Where ever applicable for small work or abadi area only for where machine can not be reached/ move)