Repairing of road (length-900) from mr. Haren Singha house to Bhaiyadas Tea garden

Box cutting or filling in Road embankment in all sorts of soil including spreading the spoils properly over the flank as necessary or on berm to approximate grade & camber and rolling the sub-grade with power roller to proper camber and grade as per direction and satisfaction of Engineer-in-charge including uprooting and removing plants and jungles when and where necessary.

Spreading and consolidation river bed materials to a depth of 100 mm and above withConstruction of Sub Base using Local Materials, spreading in uniform layers with Motor grader on prepared surface, including screening the metal asnecessary, mixing by mix in place method with Rotavator at OMC, and compacting with vibratoryroller to achieve the desired density,.... Road & Bridge Works of MoRT&H(5th Revision).i power rollar to proper gradient and camber including watering as necessary lighghting, gourding, barricading and making earthen bundh there necessary to protect edges and curing with water 2 to 3 days mending cracks and depression by rolling whrere necessary complete as per specifications. 1X (iv) For Construction of Sub Base by compacting river bed materials. Part of 1450 m

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam mspecification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding materials to fill up the interstices of coarse aggregate, watering including lighting, guarding, barricading and making necessary earthen...........y, as per Clause 404 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). a) Grading-l Aggregate (63 mm to 45 Stone Screening Type B (11.2 mm) B. Manual Means Add cost at site of 1.21 m² of Grading-I Aggregates & 0.24 m Stone Screening Type-B to arrive at the complete rate

Providing and applying Prime coat with Cationic Bitumen Emulsion of approved grade conforming to IS: 8887-1978 on the prepared surface cleaned with Hydraulic broom, moistening the surface including cost and carriage of emulsion, hire charges of machinery and 4 |labour, cost of fuel and lubricants all complete as per Clause 503 of Specifications for Road 8& Bridge Works of MoRT&H (5th Revision). (ü) On Granular surfaces treated with primer (Using Bitumen emulsion at the rate of 0.70 to 1.0 kg per sqm.) Add cost & carriages of materials gs per requirement vide Table 3.3-1 of Section 3 to get the final consolidated rate

Providing, laying and rolling of Open - graded premix surfacing of 20 mm thickness composed of 13.2 mm (@0.018 m³ per m²) and 11.2 mm (@ 0.009 m³ per m²) size stone aggregates, including thoroughly cleaning of the surface, screening, cleaning and pre-heating stone chips and fully pre-coating the same either using viscosity grade paving bitumen or cut-back or emulsion, carrying the mixture by any suitable arrangements, laying the mixture uniformly over the surface, including line, grade and level to serve as wearing course on a previously prepared base, including mixing in Mobile Hot Mix Plant (Light Duty) and thoroughly rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades including the cost and carriage of stone chips and matrix, heating the matrix, preheating the aggregates to required temperature and including the hire charges of Mobile Hot Mix Plant (Light Duty) and other machinery, pay of operators, cost of fuel and lubricants etc. complete to be followed by seal coat of either Type A or Type B as per Technical Specification Clause 508 for Rural Roads of MORD.

Waste Plastic @ 8% by the weight of total Bitumen content Bitumen consumption for 20 mm Premix carpet is 1.46 Kg per Sqm. [Subject to condition (Mandatory) Waste Plastic Collect from Ghoshpukur GP, Central Plastic Waste Managment unit under Siliguri Mahakuma Parishad].

Item No-5.13 (B) /Page no-254::Seal Coat :-Providing and laying Premixed Seal Coat (Type B) with approved quality sand/grit @ 0.6 m3/ 100 m2 and bitumen binder on thoroughly cleaned black top surface coated with tack coat, including heating and mixing cleaned sand/grit (100 % passing through 2.36 mm sieve and retained on 180 micron sieve) uniformly with bitumen binder, laying and spreading the mix at an uniform rate using suitable means, brushing the surface, if necessary, to ensure uniformity, followed by rolling with power roller including the cost and carriage of binder and aggregates, cost of heating the binder and aggregates and all other incidental charges, cost of fuel and lubricants, including hire charges of machineries, tools & plants required for construction and quality control complete as per Clause 511 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).

SOR-2018, ROAD & BRIDGE WORK_Item No-8.07/Page no-270::SOR-2018, ROAD & BRIDGE WORK_Item No-8.07/Page no-270:: Providing & fixing Concrete Sign Board as per IRC specification of size 900 x 750 x 37 mm. thick made with RCC 1:1½:3 with pakur variety stone chips reinforced with double layer IRC febric (75 x 75 mm.mesh) and fixed with necessary nuts & bolts on two RC precast posts 100 mm. x 150 mm. of height 2.65m. of which top 750 mm. is of section 100 x 13 mm.and 1.90 metre above GL & 0.75 metre below GL including digging hole, repacking the same with cement concrete 1:3:6 with jhama khoa or with local stone chips etc. complete including painting two coats on both faces lettering sign marks etc. as per direction of the Engineer-in-Charge. (The rate is inclusive of cost of reinforcement, concrete,shuttering, nuts & bolts, washer etc. complete.)

Add:- GST @ 18%

Add:- Cess @ 1%

Please Enable Macros to View BoQ information