Repairing Calibration of Fuel Pumps and injectors for Engine of BEML Dozer Model BD80 Cummins and BS6D125 BEML and BEML pay loader in Auto Workshop at RCF Trombay Unit.

Amount

A. Complete overhauling/ servicing and calibration of fuel injection pump Bosch make.

A-1-Labour charges for overhauling of Bosch make fuel injection pump.

A-2-Spare part cost for fuel injection pump.

A-2.1-Element

A-2.2-Delivery valve

A-2.3-Nozzle

A-2.4-Nozzle kit

A-2.5-Roller

A-2.6-Bearing small

A-2.7-Bearing big

A-2.8-Needle bearing

A-2.9-Bush.

A-2.1-Sliding sleeve.

A-2.11-Fork lever

A-2.12-Swiveling lever

A-2.13-Governor spring

A-2.14-Pump kit

A-2.15-Governor kit

A-2.16-Tension lever.

A-2.17-Fly weighr assembly.

A-2.18-Center bearing

A-2.19-Control rod.

A-2.2-Feed pump kit.

A-2.21-Feed pump piston.

A-2.22-Hand primer.

A-2.23-Tapped assembly.

A-2.24-Cam shaft

A-3- Calibration charges per pump

B. Complete overhauling/ servicing and calibration of fuel injection pump Cummins make along with spares:

B-1-Labour charges for overhauling of Cummins make fuel injection pump.

B-2-Spare part cost for fuel injection pump.

B-2.1-Delivery valve seal o ring

B-2.2-Delivery valve copper washer

B-2.3-Seal repair kit

B-2.4-Lift pump repair kit

B-2.5-Stop solenoid 24 V

B-2.6-FP/KE22 lift pump

B-2.7-Seal repair kit

B-2.8-Air vent screw fiber washer

B-2.9-Inline governor compression spring for RSV governor

B-2.10-Housing

B-2.11-Camshaft roller bearing

B-2.12-Anti tamper seal

B-2.13-Vent screw washer

B-2.14-Gear segment

B-2.15-Seat lower spring

B-2.16-Drive shaft oil seal

B-2.17-Element seal

B-2.18-Copper seal

B-2.19-Cover seal

B-2.20-Element housing o ring

B-2.21-Governor control plunger

B-2.22-Inline fuel pulsation damper

B-2.23-Vent screw

B-2.24-Flange gasket

B-3-Calibration charges per pump

C-Complete overhauling/ servicing and calibration of fuel injector along with spares:

C-1-Labour charges for overhauling of fuel injector

C-2-Spare part cost

Detail list of spare parts required for overhauling of one injector:

C-2.1-Connector

C-2.2-Filter

C-2.3-Adjusting tube

C-2.4-Housing

C-2.5-Spring for valve

C-2.6-Coil

C-2.7-Valve body

C-2.8-Armature

C-2.9-Needle pilot

C-2.10-Seat

C-2.11-Orifice disc

C-2.12-Drain orifice

C-2.13-Spring for nozzle

C-2.14-Fuel return line

C-2.15-Servo piston

C-2.16-Copper washer

C-2.17-O ring

C-3-Calibration charges per injector