Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹63.3 LAccepted-AOC 340 11 M S NATIONAL ENGINEERING CORP 340 11 SATTI STREET ROORKEE ROORKEE HARIDWAR UTTARAKHAND 247667 | HARIDWAR | UTTARAKHAND | 247667 | L1 | Accepted-AOC L1 | |
| 2 | L2₹64.8 L+₹36,595.55 (0.57%)Rejected-AOC 11 82 GROUND FLOOR BLOCK 11 KALYANPURI EAST DELHI DELHI 110091 | EAST DELHI | DELHI | 110091 | L2 | Rejected-AOC NOT L1 | |
| 3 | L3₹64.9 L+₹46,566.25 (0.72%)Rejected-AOC S NO 279 1 1A PLOT NO 113 KUTWAL COLONY SASTHE WASTI LOHEGAON PUNE 411 047 | PUNE | MAHARASHTRA | 411047 | L3 | Rejected-AOC NOT L1 | |
| 4 | L4₹66.6 L+₹2.1 L (3.25%)Rejected-AOC | L4 | Rejected-AOC NOT L1 | |
| 5 | L5₹68.7 L+₹4.3 L (6.61%)Rejected-AOC | L5 | Rejected-AOC NOT L1 |
| Sl No | Description | Qty | Unit | Shine Enterprises L4 | NATIONAL ENGINEERING CORPORATION L1 | Bharat Sales Corporation L2 | Shree Ram Enterprises L3 | M/s Prem Associates L5 | Shree Ayyappa Engineering L7 | DURGAI ELECTRICALS L6 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Supply, laying & testing of cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 11000 volts grade, of size 3 core 95 sq mm complete all as specified and as directed. | 1,350 | RM | 990 ₹13,36,500 Lowest | 1,040 ₹14,04,000 | 1,110 ₹14,98,500 | 1,075 ₹14,51,250 | 990 ₹13,36,500 Lowest | 1,200 ₹16,20,000 | 1,000 ₹13,50,000 |
| 2.00 | Supply and fix Cable jointing kit for 11 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sqmm complete all as specified and as directed. | 4 | Each | 13,000 ₹52,000 | 11,000 ₹44,000 | 8,000 ₹32,000 Lowest | 19,900 ₹79,600 | 8,000 ₹32,000 Lowest | 22,000 ₹88,000 | 10,000 ₹40,000 |
| 3.00 | Material and labour Cable jointing kit for 11 KV (Earthed) grade cable for outdoor end termination complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 Sqmm including dismantling old burnt cable joint termination complete all as specified and as directed. | 2 | Job | 7,000 ₹14,000 | 3,800 ₹7,600 | 5,000 ₹10,000 | 6,500 ₹13,000 | 3,700 ₹7,400 Lowest | 13,500 ₹27,000 | 7,500 ₹15,000 |
| 4.00 | Excavation in trenches in any type of soil not exc 1.5 mtrs wide and not exc 1.5 mtr in depth for laying of pipe/ cables/ poles etc and getting out hard /Dense soil complete all as specified and as directed. | 817.03 | Cum | 400 ₹3,26,812 | 250 ₹2,04,257.5 | 400 ₹3,26,812 | 590 ₹4,82,047.7 | 200 ₹1,63,406 Lowest | 650 ₹5,31,069.5 | 350 ₹2,85,960.5 |
| 5.00 | Excavation in trenches in any type of soil not exc 1.5 mtrs wide and not exc 1.5 mtr in depth for laying of pipe/ cables/ poles etc and getting out hard rock soil complete all as specified and as directed. | 130 | Cum | 900 ₹1,17,000 | 500 ₹65,000 | 600 ₹78,000 | 650 ₹84,500 | 700 ₹91,000 | 2,250 ₹2,92,500 | 400 ₹52,000 Lowest |
| 6.00 | Returning fitting in any type of soil including spreading leveling watering and well ramming in layers n.exc 25 cm complete all as specified and as directed. | 853.03 | Cum | 60 ₹51,181.8 | 40 ₹34,121.2 | 75 ₹63,977.25 | 75 ₹63,977.25 | 20 ₹17,060.6 Lowest | 100 ₹85,303 | 50 ₹42,651.5 |
| 7.00 | Removing excavated soils to a distance n.exc. 50 mtr and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and as directed. | 94 | Cum | 150 ₹14,100 | 80 ₹7,520 | 40 ₹3,760 Lowest | 100 ₹9,400 | 50 ₹4,700 | 300 ₹28,200 | 100 ₹9,400 |
| 8.00 | Supply and laying galvanised tube light grade ISI marked of size 100 mm dia including all fittings in trenches/fixed on pole/wall/floor or laid in position complete all as specified and directed. | 12 | RM | 1,000 ₹12,000 | 1,500 ₹18,000 | 850 ₹10,200 Lowest | 1,099 ₹13,188 | 900 ₹10,800 | 1,200 ₹14,400 | 1,200 ₹14,400 |
| 9.00 | Material and labour for road cutting including necessary excavation 45 cm wide and 90 cm in depth as in trenches in any type of soils/rock for laying LT UG cable through pipe after laying /through the cable trenches will be filling top with Material and labour PCC 1:3:6 type C-1 using 20 mm grades stone aggregates from top over 15 cm thick hard good of broken boulders , 63 mm gauge over 15 cm boulders 100 mm dia over filled and rammed earth to make good the disturbed surface etc complete all as specified and directed. | 6 | Cum | 800 ₹4,800 | 2,000 ₹12,000 | 7,000 ₹42,000 | 1,500 ₹9,000 | 400 ₹2,400 Lowest | 400 ₹2,400 Lowest | 600 ₹3,600 |
| 10.00 | Supply of 11 KV, 630A, 21 kA 3Sec, 3way SF6 Outdoor RMU – 2LBS + 1CB:Non-Extensible Two (2) Motor operated load break switches (LBSs) with Manual operated earthing switches in SF6 and One (1) vacuum circuit breaker with Electrical closing and tripping along with disconnector and earthing switches SCADA Compatible and base channel. Battery charger along with batteries required for Electrical operations of RMU is in the scope of the Bidder. Each module shall consist of VPIS, FPI in LBS Module (N-1) but not less than 1 no’s per RMU. Suitable arrangement for mounting FRTU, modem or Ethernet Switch/LIU along with battery charger shall be provided in RMU. Design shall be side & rare cable termination with 3mm SS Gas Tank complete all as specified and as directed. | 2 | Each Job | 7,60,000 ₹15,20,000 | 8,30,000 ₹16,60,000 | 6,80,000 ₹13,60,000 | 6,29,900 ₹12,59,800 Lowest | 7,25,000 ₹14,50,000 | 9,50,000 ₹19,00,000 | 12,25,000 ₹24,50,000 |
Tender Value
₹74.8 L
EMD Value
₹1.4 L
Closing Date
9 Sept 2025, 6:00 pmClosed
COL SAIKAT DE CWE NAVY VASCO
CWE NAVY VASCO VASCO DA GAMA GOA 403802
SPEICAL REPAIR / REPLACEMENT OF HT/LT OH LINE TO UG CABLE FROM AIRPORT 2 POLE STRUCTURE TO KV 2, GNA GROUND AND BSO YARD FROM CGRA FEEDER AT SMA VARUNAPURI UNDER GE (NW) VASCO
2025_MES_725736_1
85818
Open Tender
Civil Works
Item Rate
Vasco
Please refer Tender documents.
9 documents required · 9 mandatory
₹1,000
GE (NW) Vasco
₹1.4 L
Yes
17 Oct 2025
12 Aug 2025
11 Sept 2025
12 Aug 2025
9 Sept 2025
2 Sept 2025
Amount
Supply, laying & testing of cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 11000 volts grade, of size 3 core 95 sq mm complete all as specified and as directed.
Supply and fix Cable jointing kit for 11 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sqmm complete all as specified and as directed.
Material and labour Cable jointing kit for 11 KV (Earthed) grade cable for outdoor end termination complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 Sqmm including dismantling old burnt cable joint termination complete all as specified and as directed.
Excavation in trenches in any type of soil not exc 1.5 mtrs wide and not exc 1.5 mtr in depth for laying of pipe/ cables/ poles etc and getting out hard /Dense soil complete all as specified and as directed.
Excavation in trenches in any type of soil not exc 1.5 mtrs wide and not exc 1.5 mtr in depth for laying of pipe/ cables/ poles etc and getting out hard rock soil complete all as specified and as directed.
Returning fitting in any type of soil including spreading leveling watering and well ramming in layers n.exc 25 cm complete all as specified and as directed.
Removing excavated soils to a distance n.exc. 50 mtr and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and as directed.
Supply and laying galvanised tube light grade ISI marked of size 100 mm dia including all fittings in trenches/fixed on pole/wall/floor or laid in position complete all as specified and directed.
Material and labour for road cutting including necessary excavation 45 cm wide and 90 cm in depth as in trenches in any type of soils/rock for laying LT UG cable through pipe after laying /through the cable trenches will be filling top with Material and labour PCC 1:3:6 type C-1 using 20 mm grades stone aggregates from top over 15 cm thick hard good of broken boulders , 63 mm gauge over 15 cm boulders 100 mm dia over filled and rammed earth to make good the disturbed surface etc complete all as specified and directed.
Supply of 11 KV, 630A, 21 kA 3Sec, 3way SF6 Outdoor RMU – 2LBS + 1CB:Non-Extensible Two (2) Motor operated load break switches (LBSs) with Manual operated earthing switches in SF6 and One (1) vacuum circuit breaker with Electrical closing and tripping along with disconnector and earthing switches SCADA Compatible and base channel. Battery charger along with batteries required for Electrical operations of RMU is in the scope of the Bidder. Each module shall consist of VPIS, FPI in LBS Module (N-1) but not less than 1 no’s per RMU. Suitable arrangement for mounting FRTU, modem or Ethernet Switch/LIU along with battery charger shall be provided in RMU. Design shall be side & rare cable termination with 3mm SS Gas Tank complete all as specified and as directed.
Supplying, installation, testing & commissioning of 11 kV, 630 Amps, STC 21kA for 3 Sec Outdoor Extensible 6-way SF6 gas insulated floor mounted with copper bus bar Ring Main Unit should consist of 02 (Two) Nos incoming Load Break Switch and 04 (Four) Nos outgoing Vacuum Circuit Breaker Motorized type having facility to connect to SCADA in future with Air Insulated PT Metering Panel and 4nos MFM in outgoing VCBs. All live parts, bus bars, VCB will be enclosed in robotically welded with 2 mm thick Stainless-steel tank, 2 mm GI enclosure (CRCA not feasible looking into corrosion proof requirements) filled with SF6 at 1.4 bar with IP class IP67, leak rate less than 0.1% and outer enclosure with IP54 protection and tested as per latest IEC 62271-200. HT compact switchgear shall be with fixed type VCB for 11 kV earth system 50Hz AC three phase including earth fault and over current protection and motorized spring charging mechanism for VCB. While refilling the SF6 gas the manometer should be able to show the pressure inside the Stainless-Steel tank with a dedicated gas topping up arrangement on the LV panel. The switchgear should be tested for Internal arc for both tank and cable box IAC AFLR (21kA-1 Sec) venting through bottom. The switchgear should be totally enclosed confirming to relevant IEC standard with fitting of protection relay with indicators as under. Note: The above rate is inclusive of all the civil works for necessary foundation as per OEM recommended drawing.
S & F of cable path indicator of RCC floor mounted 4 feet 11KV Cable route marker endorsed with "HT 11 KV UG Cable" duly painted with red on Top & black on bottom portion and including PCC (1:2:4) for fixing type B2 complete all as specified & directed. made up of precast RCC (1:2:4) type B-0 (TMT bars 6 mm dia) using 12.5 mm graded stone aggregate complete all as specified and directed. Note - Cost of earth work & PCC included in the quoted rate.
Material and labour for taking down of unserviceable aluminium conductor steel reinforced (ACSR) of any description /size & in any position from existing HT poles or lines complete all as specified and as directed.
Material and labour for taking out of unserviceable insulators of any type and any position from HT poles complete all as specified and as directed.
Material and labour for taking down of existing unserviceable cross arms, mild steel channel or angle sections etc complete all as specified and as directed.
Supply and lay Double walled corrugated pipe (DWC ) confirming to IS14930 heavy duty 110/95 mm bore for cable protection as a guard pipe including required accessories etc. Complete as specified and directed
Dismantling wood poles/ struts, any size 19289 Dismantling wood poles/struts, any size Transporting to store and sacking complete all as specified and as directed.
Supply and laying LT UG cable XLPE insulated armoured heavy duty 1100 volts grade with aluminium conductor multistandarded including centre gland, lugs, jointing materials etc laid in trenches or fixed it to wall including dismantling of existing cable of following sizes
(a) 25 Sqmm 3.5 Core
(b) 50 Sqmm 3.5 Core
(c) 70 Sqmm 3.5 Core
(d) 95 Sqmm 3.5 Core
(e) 120 Sqmm 3.5 Core
Material and labour for DWC of pressure rating PN 6 (SDR 21) laid in trenches for cable protection complete all as specified and directed of following sizes:-
(a) 40 mm dia
(b) 90 mm dia
Supply and fix sheet moulding compound junction box (SMC) suitable for terminating 2 Nos 4 x 6/10/16 Sqmm UG cable including MS clamp with nut and bolt, one in Nos MCB SP 0.5 Amps including cable glandes - 2 Nos, and two way connector 1 No, including dismantling old one complete all as specified and directed. Note : MS clamp with nut and bolt will be measured and paid separately.
Material and labour Cable jointing kit for 1.1 KV grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 35 to 50 sqmm including dismantling old burnt cable joint termination complete all as specified and as directed.
Material and labour Cable jointing kit for 1.1 KV grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 70 to 120 sqmm including dismantling old burnt cable joint termination complete all as specified and as directed.
Bharat Sales Corporation (BID ID -3419691)
Shree Ram Enterprises (BID ID -3420222)
Shine Enterprises (BID ID -3417707)
M/s Prem Associates (BID ID -3420505)
DURGAI ELECTRICALS (BID ID -3419794)
Shree Ayyappa Engineering (BID ID -3420679)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .