CWE/D-30/2022-23

Amount

Demolition of brick work built in cement or cement lime mortar of any description including quoins,arches,pillars,etc., all as directed.

M & L for brick work with Cement Mortar1:6 using sub class 'B' bricks,old size , straight or curved on plan exceeding 6 m mean radius all as specified and directed.

Material and labour for brick work with sub class B bricks of old size, straight or curved on plan exc 6m mean radius in half brick walls, in CM 1:4 compolete all as specified and directed.

Taking down cement plaster of any description on brick stone or concrete walls surfaces including raking out joints hacking for keys scrubing down with water etc up to 10m height complete all as specified and directed.

M&L for 15mm thick ready mix cement plaster on wall with bulk density 1.4 to 1.70KG per ltr water ration 17 to 19% by weight with compressive strength as per IS 4031 part-VI applied as per the manufacturer instr incl necesaery cement screed and prepartion of surface to received ready mix plaster up to 10m height. complete all as specified and directed by engineer-in-charge complete all as specified and directed.

M&L for 10mm thick ready mix cement plaster on wall with bulk density 1.4 to 1.70KG per ltr water ration 17 to 19% by weight with compressive strength as per IS 4031 part-VI applied as per the manufacturer instr incl necesaery cement screed and prepartion of surface to received ready mix plaster up to 10m height. complete all as specified and directed by engineer-in-charge complete all as specified and directed.

M&L for 5mm thick ready mix cement plaster on ceiling with bulk density 1.4 to 1.70KG per ltr water ration 17 to 19% by weight with compressive strength as per IS 4031 part-VI applied as per the manufacturer instr incl necesaery cement screed and prepartion of surface to received ready mix plaster up to 10m height. complete all as specified and directed by engineer-in-charge complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of putty complete all as specifed as direted by Engr-in-charge.

M & L for applying two coats of oil bond destember over one coat of wall care putty on newly plastered surfaces(internal) of walls complete all as specified and directed.

M&L preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for old decorated surfaces plastered or unplastered surface of wall and applying two coat of oil bond distemper over one coat of wall care putty on wall complete all a spcefied.

M&L for preparation of old decorated plastered surfaces of walls, brooming down,washing with water etc and applying two coat of cement based paint over one coat of putty up to 10 m height complete all as specified and directed.

M & L for preparation of Old surface (Plastered or un plastered) on ceiling by completely scraping/ removing the existing treatment and applying two coats of white wash over a coat of primer complete.

Dismantling of wall and ceiling/cup board board fibre pulp AC boards etc any thickness including cover fillets removing the wiring and refixing the same including fixture as necessary at site including frame work

M and L Providing & Fixing False ceiling with semi perforated 12mm thcik micro tegular edged at all heights with GRG (Glass Fibre reinforced Gypsum) false ceiling tiles of size 595x595mm of approved texture, design and pattern having moisture content less than 2%,humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 475 (part-4)-1970 and light Code Description unit rate No 429 SUB HEAD :26.0 NEW TECHNOLOGIES AND MATERIAL reflectance of 85% minimum to be laid in true horizoatal level suspended on interlocking metel T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @ 120 grams oer sqm including both sides) comprising of main-T runners of size 15x32mm of length 3000mm, vross-T of size 15x32nn of lenght 1200mm amd secondry itermediate cross-T of size 15x32 of lenght 600mm to form grid module of size 600x600mm, suspended from ceiling using galvanised mild steel items (galvanising @ 80 grams per sqm) ie. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000mm to be fixed on perimeter wall/partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall screws. The work shall be carried out as per specification, drawing and as per direction of the Engineer-incharge

Taking down chowkhat or frame not exceeding 1.5 sqm each with shutter (without taking off shutter from the frame) all as specified and as directed.

Taking down chowkhat or frame exceeding 1.5 Sqm each and not exceeding 4 Sqm each sqm each with shutter (without taking off shutter from the frame) all as specified and as directed.

Taking down shutters of any discription not exceeding 1 sqm each all as specified and as directed.

S & F Pressed steel frames box type made of 1.25 mm thick MS Sheet double rebates of size 125x60mm for doors, ventilator with double rebates including necessary fixing lugs, hinges, lock strike plate etc, incl PCC 1:2:4 type B1 (using 20mm graded stone agg) to fill the frame & making good complete all as specified & directed by Engr-in-Charge.

S&F 30 mm thick 2nd class hard wood glazed and skelton shutter devided into square with plain, chamferred or rounded sash bar and fitted with cut and mitred beads for securing glass, size of members as per SSS Part - I section 8 clause 8.24 (b).

M & L for 35 mm thick factory made 2nd class hardwood plain, framed, panelled single/double shutters (two panels), with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. the size of rail and stile as per IS:1003 (Part-I) kiln seasoned and chemically pressure treated

M&L aluminium alloy powder coated windows including aluminium coated frames silding track, bottom weighing not less than 1.015 kg/Rm ,sides and top not less than 0.826 kg/Rm double revated and 0.55 kg/Rm for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter silding type with aluminium sectins as per series-A (15mm) 3 track of jindal section number for silding windows with framed shutter including aluminium allow powder coated snap type beads handles with locking arrngement spring action and glazing clips joint cleats rubber gaskets etc inclding provision of 5.5 mm thick tinted frosted glass of superior quality and stainless steel jail including all standard fittings complete all as specified and directed

M&L aluminium alloy powder coated door including frame and channel of section (Door frame single grove 101.6mm x44.45 mm x2.1,shutter top section 47.62mm x44.45x1.95mm thick shutter bottem vertical section 85 mm x44.45 mm x1.80mm yhick ,shutter middle section 83.50mm x 44.45 mm x1.80mm thick shutter glazing clips weighing not less than 0.097 kg/Rm as directed and approved by GE and as per IS specification including provn of 5.5mm thick tinted glass/12mm thick thick prelaminated particle board as required including alu handle 150 mm ,tower bolt 150 mm ,floor spring heavy duty "SAMRAT" ,looking arrangement "GODREJ" rubber gasket and door stopper complete all as specified and directed.

S&F aluminium ventilator partly glazed/ gauzed including including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. provision for fixing the exhaust fancomplete all as specified and as directed

Material and labour for aluminium alloy Powder coated standard 10mm section and opening of size window grill as per approved sample and as per IS specifications complete all as specified and as directed.

S&F for fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame and fixing with ancher bolts all as specified and as directed.

S&F 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames.

S&F MS butt hinges medium weight 100 mm size fixed with MS screws, all as specified and as directed.

S&F aluminium anodised barrel tower bolt extruded section 150 mm long and fixed with MS screws, all as specified and as directed.

S&F 150 mm extruded aluminium alloy handle anodised fabricated type and fixed with MS screws, all as specified and as directed.

S&F 300 mm extruded section aluminium alloy anodised, sliding door bolt with hasp and staple and fixing clip of sheet and fixing bolt and nut, all as specified and as directed.

M&L preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified

M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer

M&L preparation of Old or previously treated steel and iron surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified

M & L for preparation of Old or previously treated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 sqm in each pane complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing, bore of tubing 15mm, complete all as specified.

Taking up or down steel tubing and connections, including cleaning for re-fixing, bore of tubing 20mm, complete all as specified.

Supply and fix galvanized steel tubing, 15 mm bore medium grade including all fittings such as tee, Union, socket, bend/elbow etc. and short tube pieces, fixed complete to walls and ceilings or laid in floors complete all as directed

Supply and fix galvanized steel tubing, 20 mm bore medium grade including all fittings such as tee, Union, socket, bend/elbow etc. and short tube pieces, fixed complete to walls and ceilings or laid in floors complete all as directed

Cutting chases, pinning in, for brick walls built in cement mortar, making good to facings where required and pointing in cement mortar 1:3 or PCC 1:2:4 type B-O(using 12.5 mm graded aggregate) as required for conceled water tubing etc cutting exceeding 10cm girth but not exc. 20 cm all as directed.

Supply and fix for vitreous china wash hand basin (flat back) white of size 550X400mm excluding taps, waste chain and plug and porcelain stopper including a pair of mild steel angle iron brackets of suitable size and waste pipe & waste fittings complete all as specified

Supply and fix for vitreous china squatting pan Orissa pattern long pan size 580x440mm white with integral foot rests ‘standard Grade P’ or ‘S’ trap front or back inlet (excluding flushing cistern and flush pipe ) complete all as specified and directed by Engr-in-Charge,

S&F for vitreous china wash down water closet pan (padestal pattern) white incl 'P' or 'S' 100 mm trap and plastic water closet seat cover making good the disturbed surface to match with the existing complete all as specified and all as directed.

Supply and fix for PVC low level white flushing cistern valveless syphonic action type 10 lts capacity IS marked with inlet, ball valve, float and handle including PVC flush pipe 32 mm dia with bend and a pair of mild steel angle iron brackets of suitable size including making necessary connections to water supply pipe line and WC,(ISI Marked) complete all as specified all as specified.

S & F for 15 mm dia 600mm long PVC connections with brass check nut complete

S & F for Glass Corner Shelf 6mm thick including CP railing radius 250mm complerte all as specified and directed by Engineer-in-Charge.

S&F for Glass shelf assembly 5.5mm thick, 600mm long 120mm wide with cp railing complerte all as specified and directed by Engineer-in-Charge.

S&F for Health faucet, CP brass with 1.50m long flexible pipe complerte all as specified and directed by Engineer-in-Charge.

S&F CP jet spray for EWC with flexible pipe and angle cock/stop cock complete all as specified.

S&F for bib taps 15 mm bore chromium plated brass, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified

S&F for angle valve, fancy type, chromium plated brass, 15mm, complete all as directed.

S&F for 2-in-1 angle valve, fancy type, chromium plated brass, 15mm, complete all as directed.

S&F for 15 mm bore gate valve,cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as directed.

S&F for 20 mm bore gate valve,cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as directed.

S & F for Chromium plated brass overhead shower with arm complete all as specified and directed

S & F concealed brass chromium plated stop valve fancy type suitable for 15mm bore of pipe with long shank and cup complete all as specified.

S&F in repairs chromium plated brass central hole WHB mixer 15 mm bore chromium plated, fancy type including joints to hot and cold complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise completed all as specified.

Demolition of stone slab and tiles of any description or thickness in floor apron etc complete all as specified and directed.

M&L for Non - skid Ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile incl 15mm thick screed bed or bedding layers in cement mortar ( 1:6) complete all as specified and as directed.

S&F Non - skid Ceramic colour tiles 600 x600 x 7 to 8 mm thick in floors etc and 15mm thick screed bed 1:6 in cement mortar. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile all as specified.

S&F Non - skid Ceramic colour tiles 600 x100 x 7 to 8 mm thick in vertical surfaces etc and 10mm thick screed bed 1:4 in cement mortar. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified.

M&L for glazed ceremic colour tiles (600x300x7mm) thick, in vertical surface etc set and jointed in neat slurry and pointed in white or coloured cement to match with tiles including 10mm thick rendering in cement mortar (1:6) complete all as specified and as directed.

M&L for 18-20 mm Granite (any type) work (table rubbed and polished) in steps,jambs,pillars window-cill,cooking platforms and incl 15mm thick screed bed using marble dust with admixture in CM (1:4) with pointing and white cement (1:2) of pigment to match with shade of granite all as spd.

Dismantling asbestos cement corrugated or semi corrugated sheets in roof fixed with L hook or cranked bolt

Dismantling plain or corrugated steel sheeting any gauge thickness including nainital or similar pattern roof covering complete .

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Dismantling unframed timber scantlings 40sq cm and over in section in any position all as specified and directed

S&F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed

M&L for roof treatment as per the description below including dismantling/taking down existing roof treatment complete:- a) preparation of roof surfaces by removing all loose material /dust extra for carrying out water proofing treatment. b) Apply bituminous primer @ 0.3 ltr/Sqm (conforming to IS-3384) on prepared surfaces. After drying of primer apply a coat of hot blown 85/25 grade bitumen conforming to (IS-702 @ 1.20 kg/Sqm of prepared surfaces. c) Laying APP (Atatic Polypropylene) modified five layered membrane 3 mm thick and weighing not less than 4 Kg/Sqm with centre core 160 GSM/ Sqm ; core reinforced and laid with 75 mm side overlap and 150 mm end lap. The membrane shall be laid with LPG torch application and overlaps sealed and finished neatly as per the manufacturer specification apply a coat of hot blown 85/25 grade bitumen conforming to (IS-702 @ 1.20 kg/Sqm and apply two coat of silver shield bitumestic aluminum paint all as specified

M & L for PCC 25 mm thk type B-0, 1:2:4 (using 12.5mm graded stone aggregate) as in roof complete all as specified and directed.

Demolition of concrete and pavings n.exc 15 cm thickness (below or above ground level)

M & L for 75 mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection laid in bays & surfaces finished even and smooth without using extra cement, complete all as specified.

Material and labour for rotational moulded polyethylene water storage tanks white colour 1000 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 25 mm dia brass float valve and polyethylene ball including taking out existing unserviceable overhead tank of any description.

S&F 20 mm bore tank nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms) complete all as specified and directed

Demolition and breaking up rain water pipes 100/75 mm dia (CI,AC,PVC etc) set in any cement mortor of any diameter incl bends.

S/F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, 110mm bore complete.

S&F for PVC (SWR) bends/trap & tee any radius, 110 mm bore complete.

S&F for 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement

S & F for stainless steel drapery Rod 25mm dia Powder Coated including stainness steel side caps, brackets, and rings, complete all as approved by Engineer-in-charge

M&L Providing cement concrete in coping type B-1 ,1:2:4 using 12.5mm graded stone aggregate complete all as specified including necessary form work and finishing the exposed surface even and smoth with using extra cement complete all as specified.

Excavation in trenches n exc 1.5m wide and n exc 1.50m in depth for foundation etc and getting out in soft/loose soil complete all as specified.

Returning filling in, incl spreading levelling watering and well ramming in layers n exc 25cm (after the pipes have been laid and tested) in soft/loose soil complete all as specified.

Removal of surplus soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above starting point.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) 200mm dia set in cement mortar of any dia complete including removal of debris from site and deposited in low lying area.

M&L for 200mm bore DWCPE drain pipes laid in trenches and jointed in CM 1:1 with spun yarn complete all as specified and directed.

M&L PCC 1 : 2 : 4, type D2, using 40mm graded stone aggregates, as in foundation of manholes etc complete all as specified.

M&L Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finsihed even and smoth without using extra cement complete all as specified.

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 or 3/4 section) in cement concrete 1 : 2 : 4 type B1 using 20mm graded stone aggregate finished smooth and reforming benching as required for 150mm dia pipes complete all as specified.

M&L Factory made Precast cement concrete manhole cover' area of each cover Ex .20sqm but not exceeding 0.75 sqm 100 mm thichK TypeB1 1:2:4 concreting including grove and hook arrangement for lifting and placing in position and side covered by MS Sheet complete all as specied and directed by E-IN-Charge

M&L Factory made Precast cement conc rete manhole cover' area of each cover not exceeding 0.20 sqm 50 mm thick TypeB1 1:2:4 concreting including grove and hook arrangement for lifting and placing in position and side covered by MS Sheet complete all as specied

S&F Cequered cement concrete tiles with grey cement and pigment 30cm X30cm X22mm thick set jointed and pointed in neat cement slurry in floors over 15mm thick screed bed in CM 1:6 all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block 80mm thick M-40 grade any shape and size with grey cement and pigment

M&L for 75mm thick cement concrete type D-2 1:4:8 (40mm graded aggreate)in sub base, filling and mass concrete

M&L for sand filling under floor or in foundations including watering and consolidation

Taking down carefully copper/aluminium point wiring from wooden battan/ conduits or from the wall by chasing/cutting (light, fan, socket or power) completely including (fittings such as switches, ceiling roses, pendants, regulator, sockets etc. to be measured separately) and making good disturbed surfaces of walls, floor etc.

Taking down old MCCB,TPN DBs , SPN DBs,SP MCB & Main Switch/enclosure box of any make and type from the site and making good surface complete all as specified and directed.

Taking down old submain wiring of any size and make from the site and making good surface complete all as specified and directed.

Taking down old unsv light fitting of any size and make from the site and making good surface complete all as specified and directed.

Material & labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall on wall including sunk zinc coated pressed steel terminal box of 1.60mm thick with 3mm thick plastic laminated sheet top cover, brass screws, cup washers etc complete all as specified and directed for One light / bell / buzzer point/socket outlet on independent board controlled by one, one way switch 06 Amps, all as specified and directed.

(d) -ditto- as above item No 104 but socket outlet on Same board.

All as per Serial Item No-104 above but point wiring with 4 Sqmm single core FRLS cables and earth continuity wire of 4 Sq mm single core FRLS cable for one 3 pin 15 Amps socket out let point controlled by one, one way switch on independent board complete all as specified and directed.

M & L for sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 06 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing and testing on completion etc complete all as directed. Note: Three runs of 6 sqmm cable and one run of PVC conduit shall be measured as one RM.

M & L for sub main wiring with 04 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 04 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing and testing on completion etc complete all as directed. Note: Three runs of 4 sqmm cable and one run of PVC conduit shall be measured as one RM.

M & L for sub main wiring with 1.5 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing and testing on completion etc complete all as directed. Note: Three runs of 1.5 sqmm cable and one run of PVC conduit shall be measured as one RM.

M&L for switch Modular type 6 Amps 1 Way,1 module, 230V AC complete all as specified and directed by Engineer in charge.

M&L for Modular Bell push button SP with indicator 6 Amps, 1 module 230V AC complete all as specified and directed by Engineer in charge.

M&L for switch Modular type 16 Amps 1Way, 1 module with modular plate light marking 230V AC complete all as specified and directed by Engineer in charge.

M&L for Modular socket outlet 2/3 pin 6 Amp socket 2 module complete all as specified and directed by Engineer in charge.

M&L for Modular socket outlet 2/3 pin 6/16 Amp universal socket 2 module complete all as specified and directed by Engineer in charge.

M&L switch Piano flush type 5 Amp SP one way all as specified and directed by Engr in Charge.

M&L switch piano flush type 15 Amp SP one way all as specified and directed by Engr in Charge.

M&L socket outlet 5 pin 5 Amp flush type all as specified and directed by Engr in Charge.

M&L socket outlet 2 in 1,6 pin 5/15 Amps all as specified and directed by Engr in Charge. Make:-

S & F electronic fan regulator 5 step 360 degree rotation connecting complete all as specified

S&F sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 20 Amp 220 volts, 50 Hz, 10KA breaking capacity complete all as specified and directed.

M&L ceiling rose 3 phase PVC polycorbonate,isolated body complete all as specified and directed.

M&L for modular stepped type electronic fan regulator 120W, 2 module all as specified and directed by Engineer in charge.

M&L bell ding dong AC,230 volts,single pole all as specified and directed by Engr in Charge.

M&L angle Lamp holder with metallic ring, PVC/Polycorbonate type with back plate complete.

Supply and fix LED on surface and wall mounted LED batten with polycarbonate housing and initigarated electronic drive 20 Watt fixture 4 feet provided for efficient heat dissipation with policorbonate diffuser and integrated electronic driver and all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block, with lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 100 Lumens/watt, complete all as specified and directed.

Supply and fix LED on surface and wall mounted LED batten with polycarbonate housing and initigarated electronic drive 12 Watt fixture 2 feet provided for efficient heat dissipation with policorbonate diffuser and integrated electronic driver and all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block, with lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 100 Lumens/watt, complete all as specified and directed.

S & F wall mounting air circulator fans AC single phase 230/240V, 1440 RPM heavy duty of size 600 mm sweep(24"), 180 Watt , aluminium alloy three blade , double ball bearing 90 oscillation , sturdy close-mesh guard beautiful designed, powerful heavy duty motor, air delivery 270 m/Min, mounting on wall complete all as specified and directed by Engr-in-charge.

Supply and fixing energy saving new generation 10 Watts LED 6000K IP65 bulk head fitting with opal diffuser, etc and all accessories pre-wired including connecting up complete all as specified and directed.

S & F LED bulb 9 watts, 900 lumens output, 6500K suitable for B-22 base all as specified and directed.

M&L Decorative wall mounting Decorative wall light fixture made up of Polycarbonate,suitable for 14W retrofit LED BULB (B-22 base), including LED bulb, complete all as specified.

S & F water heater storage type Geyser vertical type with suitable size of fastner and, inner tank material of superior glass line tank and outer body material of ABS with high pressure with standing enabling (up to 8 bar pressure) capacity including provision and connecting up of SS braidedpipe with adopter for inlet and outlet water connection having adjustable knob for temperature control and inner tank should be glass line coated, capacity 25 Ltrs, having heating element 1.5 KW and not less than 5 star rating, suitable for ,230 volt, 50 Hz electric supply complete all as specified and directed .

Supply and Fix 45 W High efficient LED Street light fitting with pressure die cast LM6 Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie is 100lm/W with a life class of 50,000 burning hours at L70.The color temperature is around 6500 K with a color rendering index of 70. The luminaire is IP:66 protected with IK05 impact resistance. It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, THD<20%, High and low protection along with a surge protection of 4 KV including provision of suitable size bracket bend to shape and necessary clamps etc for fixing the light fittings on pole/building fixed complete as specified and directed.

M & L for sub main wiring with 10 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 10 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing and testing on completion etc complete all as directed. Note: Three runs of 10 sqmm cable and one run of PVC conduit shall be measured as one RM.

Taking down ceiling fan any make from ceiling carefully, cleaning to remove any type of sticky dust with cleaning material as required and re-fixing in its original / desired location with necessary connection incl provision of cable from ceiling rose to connector of fan after repairing, greasing, oiling, replacement of minor items such as pins, nut bolts, flexible wire etc incl spray painting with synthetic enamel paint in white colour complete all as specified & directed.

M & L for opening up the winding of ceiling fan 1200 mm sweep any make any type and rewinding with super enamelled copper winding wire after inserting super enamelled insulating material binding it with insulating tape etc completely and varnishing well including drying completely. Replacement of worn out / unserviceable capacitor bearing , bush , safety pins, nuts, bolts, washers , rubber bush with ceiling fan clamp, cable PVC flexible 23/0076 and testing the ceiling fan after re-fixing of the blades to the entire satisfaction of Engineer-in-Charge.

Supply and fixing Exhaust fan 300 mm sweep(steel Body) , 1250 RPM, non metallic resin body, single phase 240 volts AC 50 Hz and connecting up complete including louvers and provision of copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan complete all as specified and as directed.

Supply and fixing Ventilating Fan 250 mm sweep, 1250 RPM, non metallic resin body, single phase 240 volts AC 50 Hz and connecting up complete including louvers and provision of copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan complete all as specified and as directed.

Supply and fixing ceiling fans three blade, Robust and reliable inverter motor (brush less DC Motor) powered by ECM technology, BEE 5 star rating for energy saving, rated Air delivery >220 cum/min, AC single phase 230/240 V of size 1200 mm sweep including making connection with three core flexible, copper cable pvc insulated of suitable length, complete all as directed.

S&F of Recess mounting STRATO 2'x2' square flat panel ultra slim Edge lite scoop LED light 36 watt warm/cool white with driver etc suitable for Grid ceiling/Gypsum board/POP ceiling incl making electric connection complete as as directed.

Supply & fix of factory made epoxy powder coated Load line Distribution Board TPN-4 ways with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including insulated 200 Amp copper bus bar, Isolated neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one TPN- MCCB 125/160 Amp as incomer and 32 to 63 Amp SP MCBs outgoing complete all as specified and conforming to IS : 8623, complete as as directed.

M&L earthing complete with GI electrode 600x 600 x 6mm, thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below normal ground level (with top edge of earth plate not less than 1.50 mtr below normal ground level connected to GI strip 32x6mm as earthing lead by means of bolt nuts, check nuts, and washers of brass connected including gun metal or phosphorus bronze of sixe 75x75x25mm drilled and screwed including 3 Nos 8mm dia 25 mm long hexagonal head screwed all as specified including excavation and earth work and disposal of surplus soil incl 40 mm GI tubing light grade and necessary fitting for protection of GI strip incl laying of charcoal dust and common salt PPC (1:2:3) type C-1 (using 20mm graded stone aggregate) for earth pit with 40 x 40 x 6mm MS angle iron frame for cover 40 mm thick (1:2:4) type B20 using 12.5 mm graded stone aggregate reinforced with 8 mm dia round bar @ 75mm C/C both way with MS handle 20mm dia plastering 15mm thick CM (1:6) internally and upto 150mm below ground level externally PGL funnel with ground wire mesh 20mm dia Med grade GI pipe for watering complete all as shown on electrical plate No 3 of SSR Part-1 2009 and connected in earth test incl testing completed all as specified and directed.

Supply and fixing of sheet metal enclosure distribution board, single pole and neutral, AC, 240 volts, 08 way, double door with 200 Amps rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified directed.

M&L MCB SPN 32 Amp "C " curve .

Supply and fix of MCCB 160 Amps, FP 415 volts 16 KA 50 HZ with thermal magnetic setting complete all as specified and directed by Engineer in charge.

S&F MCB SP 6-32 Amps 240 volts curve 'C' series 10 KA 50 HZ complete all as specified and directed.

Supply and fixing LED Bollard integral decorative with PMMA diffuser 10 watt of height 0.6 meter with IP 65 protection suitable for single phase 230 volts 50 HZ AC Supply including LED bulb , Poles, service wire and cement work complete all as specified and directed by Engineer-in-Charge.

Supply and fixing new generation, post top energy saving environmently friendly 25W , long life aesthetically designed with symmetrical light distribuiton spun aluminium landscape luminaire with high power LED as light sources.

imran construction company

M/S Chhavi Constructions Co

The new hut furnitures

L G BUILDERS

GRID ENGINEERS