Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.9 LAccepted-AOC | L1 | Accepted-AOC Being L1. | |
| 2 | L2₹45.8 L+₹1.9 L (4.32%)Rejected-Finance KHAWASNIWAS NEAR POLICE QTRDEORALI GANGTOK SIKKIM | L2 | Rejected-Finance Higher Bid value. | |
| 3 | L3₹47.1 L+₹3.2 L (7.27%)Rejected-Finance | L3 | Rejected-Finance Higher Bid value. | |
| 4 | L4₹47.4 L+₹3.5 L (7.91%)Rejected-Finance | L4 | Rejected-Finance Higher Bid value. | |
| 5 | L5₹48.0 L+₹4.0 L (9.22%)Rejected-Finance | L5 | Rejected-Finance Higher Bid value. |
Tender Value
₹41 L
EMD Value
₹82,000
Closing Date
1 May 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Gangtok
GE Gangtok New Mil Stn Gangtok, Sikkim PIN-737102
SPL REPAIR TO PIPELINE AND WATER STORAGE TANK OF MP GOLAI AREA AND PROVN OF 15 X LED SECURITY LIGHTS NEAR BLDG NO T 42 AT SWASTIK UNDER GE GANGTOK
2024_MES_649165_1
8181/A/E8
Open Tender
Miscellaneous Works
Works
182 days
GE Gangtok New Mil Stn Gangtok
As per tender documents.
8 documents required · 8 mandatory
₹500
GE Gangtok
₹82,000
Yes
28 Jun 2024
4 Apr 2024
3 May 2024
4 Apr 2024
1 May 2024
18 Apr 2024
Amount
M&L for 2nd class hard wood timber scantling of any size or in any position such as frame work for wall cladding etc all as directed by Engr-In-Charge.
S&F 18/19 mm thick particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work complete all as specified and directed.
S&F 9/10mm thick PVC ceiling/wall panels of interlocking types, width 250/255 mm with lamination design and exc 60% of PVC content including necessary H-joints internal/external corner trim, corner cove, F/J edge trims where required fixed with hidden screws including to steel/wooden frame work complete all as specified and as directed.
M&L for preparation of complete removal of existing treatment on old plastered surfaces of walls applying two coats of distemper, oil emulsion, white or tinted over old wall surface on a coat of 2mm thick wall care putty, complete all as specified and directed.
M&L preparation of new or previously untreated wooden surfaces of any description over 10 cm width or grith and applying two coats of synthetic enamel paint (1st grade quality) over one coat of pink primer complete.
Excavation trenches not exceeding 1.5m wide and not exceeding 1.5m depth for laying/repairs to pipe line and getting out in any soft soil all as specified and directed by Engr-in-Charge.
M&L for PCC type D-2 (1:4:8) using 40mm graded stone aggregates as in supporting pillar/block including necessary form work as required complete for resting GI Pipes
M&L for PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in surface channels and drain complete all as directed.
M&L for 10mm thick rendering plaster in CM (1:4) on fair faces of conc faces / brick wall faces finished even and smooth (without using extra lime or cement) whith neeru finish to plastering surfaces complete all as specified and directed.
M&L for PCC (1:3:6) type C1 (20mm graded aggregate) as in coping, bed plates, parepet, plinth course including weathering, slightly rounded or chamfered angles and throating, all as specified and directed.
M&L for Formwork to faces of walls, retaining walls, abutments, parapets and staircase railing and similar work rough finished to concrete flat surfaces complete all as specified and directed.
S&F mild steel framed work such as grills, gratings etc., with end bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 compelete all as specified and directed.
M&L for preparation of new steel surfaces of any description not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint (1st grade quality) over a coat of red oxided primer exposed to view surfaces complete all as specified and as directed.
Returning anf filling in excavated soil including spreading, leveling, watering and well ramming in layers not exe 25cm complete all as specified and directed.
Removing surplus excavated soil not exceeding 50m and depositing where directed at level not exceeding 1.5m above starting point in soil complete all as specified and as directed.
Demolition of concrete of any description and in any position not otherwise specially provided for complete all as specified and directed.
M&L for providing cement concrete (1:2:4) type B-1 using 20m graded stone aggregate as in roof padding, roof curbs to bring top surface to slab in slope including finish the surface even and fair complete all as specified and as directed.
Taking down cement plaster of any description on brick or stone walls including raking out joints hacking for key, scrubbing down with water etc.
M&L for 20mm thick rendering in cement plaster in CM (1:4) in two layer and top layer 10mm thick shall be mixed with WPC @ 3% by weight of cement on fair faces of stone masonry wall including finish the surface even and fair without using extra cement complete all as directed and specified (WPC shall be measured and paid separately)
M&L for applying two coat of exterior acrylic emulsion weather proof paint over a coat of primer including preparation Old plastered surface all as directed by the Engineer-in-Charge.
M&L for cutting of the construction joints 'V' shaped grooves and patching the 'V' shaped grooves with cement, admixed with quick setting compound complete all as specified and as directed.
M&L for fixing the PVC nozzles on the surface of grooved concrete surface of water tank and grouting with quick setting compound complete all as specified and as directed.
M&L for grouting by injecting mixture with intraplast EP / Arm grout through the PVC nozzles provided with high pressure injection pump complete all as specified and as directed.
M&L for applying entire damaged wall surface and additional buffer zone of water storage tank with one coat of flexible acrylic polymer coating TOP GUARD complete all as specified and as directed.
M&L for applying entire damaged wall surface and additional buffer zone of water storage tank with two coats of edible grade water base epoxy TANK COAT complete all as specified and as directed.
Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft / loose soil complete all as specified and as directed.
M&L for hardcore of gauge not exceeding 63mm (using broken stone or boulders) deposited, spread and levelled in layers not exceeding 15cm thick, watered and rolled / rammed to a true surface complete all as directed.
M&L for 75mm thick PCC type C2 (1:4:8) (using 40mm graded stone aggregate) as in plinth hardstanding finished the concrete surfaces even and fair without using extra cement etc. complete all as specified and as directed.
M&L for Lacquer coated precast chequered cement concrete tiles made with grey cement and pigment of size 300 x 300 x 25mm thick as in pavement / footpath, set and jointed in neat cement slurry and pointed with cement laid over and including screed bed / bedding layer of 15mm thick in cement mortar (1:4) complete all as directed.
Dismantling and taking out old unserviceable rusted GI water mains and removal complete all as specified and as directed by the Engineer-in-Charge for 25mm dia bore
All as per Item Ser No 30.00 but for 40mm dia bore
All as per Item Ser No 30.00 but for 50mm dia bore
All as per Item Ser No 30.00 but for 80mm dia bore
Supply and fixing GI tubing medium grade ISI Marked laid in trenches / laid under floor on ground / floor including all fittings such as elbow, union, reducer, tees, bends etc. and short length complete all as specified and as directed by the Engineer-in-Charge for 25mm dia bore
All as per Item Ser No 34.00 but for 40mm dia bore
All as per Item Ser No 34.00 but for 50mm dia bore
All as per Item Ser No 34.00 but for 80mm dia bore
S&F in replacement gun metal valves of size 25mm bore ISI marked with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and as directed.
S&F in replacement gun metal valves of size 40mm bore ISI marked with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and as directed.
S&F in replacement gun metal valves of size 50mm bore ISI marked with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and as directed.
Supply and Fixing cast iron sluice valve with stainless steel spindle and check nuts of size 80mm dia suitable including removing unserviceable sluice valve complete as directed.
Supply and fixing Air release valve, single orifice, flanged, cast iron, PN 1 of 50mm dia as specified and directed by the Engineer-in-Charge.
Supply and fixing Air release valve, single orifice, flanged, cast iron, PN 1 of 80mm dia as specified and directed by the Engineer-in-Charge.
S&F in replacement Bends, Tapers, Tee pieces (single & double branch) any type and angle / radius and straight connecting pieces but all ends flanged complete all as specified and as directed by the Engineer-in-Charge.
Supply, laying, jointing and testing in trenches or passing through pipe, 1100 Volts grade XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured LT electric power under ground cable conforming to IS:7098 (Pt-1)-1988, heavy duty with aluminium conductor of cross sectional area 10 Sqmm 2 core with necessary fixing arrangements such as lungs, glands and terminal etc complete all as specified and as directed
Supply and laying DWC pipe SN-4 with coupler 40 mm OD, ISI marked along with all accessories like socket. bend, couplers etc conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. laid in trenches/ fixed to pole laying under road crossing/fixed on pavement walls with clamps complete all as specified and as directed.
M&L for Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-22 (8.5 meter lang) and all as specified and directed
S&F LED street light fitting 60 Watt 230V AC outdoor type with high pressure diecast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrison resistant including thermal management in multiple optics complete with IP 65/66 protection and impact resistance of IK07 complete GI bracket 1.5m long made out of Gl dia suitable for fixing street lights bend to suitable radius incl 2 sets of clamps nuts bolts washers incl painting wth aluminium paint, Supply & fixing 1.5 Sq mm 3 core, 240volts Copper Conductor cable heavy duty PVC insulated, round sheathed ISI marked in PVC conduit etc all as specified and as directed
Supply and fix in repair, Street light cable junction box size 155x210x92 made of polycarbonate, "halogen free and weather proof, for outdoor installation (with metric knockouts for cable entry) IP-66 protection including short cable entry gland thread type with lock nut. four way terminal, Gl flat strip clamps of size 25mm X 3mm with bolts, nuts and washers for fixing with MCB one 06 Amps inside the junction box complete all as specified & as directed.
Supply & fixing 1.5 Sq mm 3 core, 240volts Copper Conductor cable heavy duty PVC insulated, round sheathed ISI marked in PVC conduit alongwith clamps nuts & bolts all as specified and directed by Engr-In-charge.
M&L Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, buried directly and preferably vertically in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galavanised lead wire 4.0 mm dia (upto 7.5 M in length from earth plate) by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3, connected to earthing with DBs all as specified including earth work and excavation in any type of soil, PCC 1:3:6 type C1 chamber & RCC 1:2:4 type B1 cover 40mm thick, with 8mm dia steel deformed (TMT bars) reinforcement at 150mm c/c both ways, 20mm dia GI medium grade pipe for watering, water funnel complete all as specified and testing on completion.
M/S S. S CHETTRI AND SONS
DHARMINDER SINGH
KARMA SHERPA
BIJAY MITTAL
RAAJ BANGAR
M/S MANOJ VERMA
MAHENDRA KHAWAS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .