SPL REPAIR TO JCOs MESS BLDG NO P-712, P-711, SINGLE JCO LIVING AND BLDG NO P-719 (SINGLE MEN BK) AT SRI GANGANAGAR MIL STN

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr in Charge.

M&L 450/600x300x7 mm thick premium quality glazed ceramic coloured tiles as in vertical sufaces such as skirting or dado set & jointed in neat cement slurry & pointed/jointed with epoxy grout to match the shade of tiles including 10mm backing coat in CM 1:4 complete all as specified and directed by Engr in Charge.

M&L Antiskid double charged vitrified tiles 9 to 10 mm thick area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed/joint filled with epoxy grout cement to match including 15mm of screed bed in CM 1:6 complete all as specified and directed by Engr in Charge.

M&L for Double charged premium quality Virified Ceramic tiles 9-10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but n exc 1.00 Sqm in floors etc. set and jointed in neat cement slurry and pointed in epoxy grout to match including 15mm thick screed in CM 1:6 complete all as specified and as directed by Engr-in-Charge.

M&L for Double charged premium quality Virified Ceramic tiles 9-10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but n exc 1.00 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick screed in CM 1:4 complete all as specified and as directed by Engr-in-Charge.

M&L Non- skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed/joints to be filled with epoxy grout to match the shade of the tiles including 15mm screed bed in CM 1:6 complete all as specified and directed by Engr in Charge.

M & L granite (telephonic black/as approved) work 20 mm thick (table rubbed and polished) in cooking platforms and like in cement mortar/screed 1:4, 15mm thick, including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engr in Charge.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed by Engr in Charge.

Demolition of cement concrete unreinforced in ground floors and pavings not exc 15 cm thickness (below or above GL) complete all as specified and directed by Engr in Charge.

M&L 25 mm thick cement concrete flooring type B0 1:2:4 using 12.5 mm graded aggregate finished even and fair complete all as specified and directed by Engr in Charge.

M&L 75 mm thick PCC 1:4:8 type D2 using 40mm graded aggregate as in sub base even & rough fininshing to the concrete surface complete all as specified and directed by Engr in Charge.

M&L for 40 cm x 40 cm x 25 mm thick chequered cement concrete tiles set jointed and pointed in neat cement slurry in floors with grey cement including 15mm thick screed in CM 1:6 with pigments complete all as specified and directed by Engineer-in-Charge.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed by Engr in Charge.

M&L 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as specified and directed by Engr in Charge. Note : Rastes included for forming expansion joints of size 10mm wide and min. 30mm deep of span n.exc 3m and at turning and joints should be filled with bitumen mastic grade B.

Dismatiling brick tiles or terracing tiles, single layer on roofs and mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof including cleaning existig surfaces througly with wire brush complete all as specified and directed by Engineer - in - Charge.

M & L for PCC 1:2:4, type B-0, as in roof Kerb/concrete padding making concave shape gola at junctions of roof/ terrace with parapets/ sides walls/ benching course of roof top surface finished even and levelled complete all as specified and directed by Engr in Charge.

OVERLAY- PU BASED ELASTOMERIC LIQUIED MEMBRANE SYSTEM FOR EXPOSED ROOF : Providing and applying polyurethane liquid roof waterproofing with improved water ponding capability, elastomeric high build liquid membrane for concrete roofs for exterior wall and exposed surface with solid content not less than 80% and solar reflective index not less than 106 as per (ASTM E1980-19)/tear strength ~20 N/mm (Free film, 14 days, +30 degree C) (ASTM D624) and tensile strength >= 2 N/mm2 (ASTM D4541), elongation 350 to 400% as per ASTM D412 and crack bridging ability upto 2mm. (a) After proper surface preparation, Apply one coat of Primer for PU coating as per manufacturers specification. (b) Apply 1st coat of ShaliUrethane® BTD (white) @ 650 gm / m²(minimum) or equivalent by brush / roller while prime surface is tacky, Spread waterproofing reinforced Glass Fiber mash of 45 GSM with overlaps of 50 mm in both directions when the surface is still tacky. Allow 1st coat to dry. (c ) Apply 2nd & 3rd coat of ShaliUrethane® BTD (white) @ 650 gm / m² (minimum) or equivalent by brush/roller. Make : Fosroc/Sika/Choksey/Bostik/STP/ Asian Paints/Berger Paints Note : (i) The Minimum dry film thickness (DFT) of roof treatment shall be 1.5mm if any shortfall in thickness of above treatment the same shall be achieved by additional coat. (ii) The procurement of material and execution of the work of water proofing treatment shall be carried out by authorised applicator approved by GE. (iii) The manufacturer/authorised applicator shall give a warranty for the performance & durability for 10 years.

Dismantling of sub class B brick old size work built in cement mortar complete all as specified and directed by Engr in Charge.

M&L Brickwork with fly ash bricks straight or curved on plan exc 6 m mean radius, old size, straight built in CM (1:6) complete all as specified all as specified and directed by Engr in Charge.

All as per Srl item No. 20 here-in-before but except bricks complete all as specified and directed by Engr in Charge.

Demolition of reinforced cement Concrete of any description and in any position not otherwise specifically provided for (reinforcement shall be cut as required to facilitate demolition) complete all as specified and directed by Engr in Charge.

S&F mild steel TMT bars 10mm dia and over , cut to length, bent to shape requred, including crancing bending and binding with mild steel (anneal) wire not less than 0.90mm dia complete all as specified and directed by Engr in Charge.

Taking down cement plaster any description including raking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed by Engr in Charge.

M&L for rendering 15mm th. on fair faces of brick or concrete surfaces in CM 1:6 finished even and smooth without using extra cement as internal plaster on walls complete all as specified and directed by Engr in Charge.

M&L for rendering 15mm th. on fair faces of brick or concrete surfaces in CM 1:4 in two layers and second layer mixed with integral water proofing compound and finished even and smooth without using extra cement as external plaster on walls complete all as specified and as directed. Note : water proofing compound measured and paid seperately in respective items.

M&L for 12-15 mm thick rendering with ready mix concrete over any surfaces of brickwork, concrete surfaces finished even & fair finishes without using extra cement complete all as specified and directed by Engr in Charge.

Supply Only Liquid waterprooing Compound complete all as specified and directed by Engr in Charge.

M&L, 5 mm thick rendering in with ready mix plaster on concrete surfaces as in ceillings.finished even and smooth w/o using extra cement & cken wire mesh/fabric mesh if required complete all as specified and directed by Engr in Charge.

M&L Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work including 1-2mm thick acrylic wall care putty complete all as specified and directed by Engr in Charge.

Material & Labour for applying Two or more coats of 100% Premium exterior acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including 1-2mm thick acrylic waterproof putty complete all as specified and directed by Engineer - in - Charge.

M&L two coats of Acrylic Emulsion with 1st quality Interior acrylic emulsion (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification to new surfaces on ceilings including preparation of surface and wall care putty finish complete all as specified and directed by Engr in Charge.

M&L two coats of Acrylic Emulsion with 1st quality interior acrylic emulsion (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification on ceilings including complete removal of oldtreatment & preparation of surface with putty finish complete all as specified and directed by Engr in Charge.

M&L Acrylic Emulsion with 1st quality interior acrylic emulsion (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats with 2-3mm thick wall care putty after complete removing of existing treatment complete all as specified and directed by Engr in Charge.

Material & Labour for applying Two or more coats of 100% Premium exterior acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm including 1-2mm thick waterproof acrylic wall care putty after complete removal of existing treatment complete all as specified and directed by Engineer - in - Charge.

M&L two coat of synthetic enamel paint on old painted surfaces of wood and wood based materials over 10 cm width or girth including preparation complete all as specified and directed by Engr in Charge.

M&L two coat of synthetic enamel paint on old painted surfaces of steel and iron work over 10 cm width or girth including preparation complete all as specified and directed by Engr in Charge.

M&L, two coats of synthetic enamel paint over a coat of red oxide on new steel surface over 10 cm width or girth, not otherwise described including preparation of new surface complete all as specified and directed by Engr in Charge.

M&L for rolled mild steel in Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including taking down of pld steel complete all as specified and directed by Engr in Charge.

Taking down chowkhats or frames without taking off shutters exc 1.5 Sqm but n exc 4 sqm each complete all as specified and directed by Engr in Charge.

Taking down chowkats or frames (without taking off shutters from the frame) not exceeding 1.5 sqm each complete all as specified and directed by Engr in Charge.

Taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed by Engr in Charge.

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engr in Charge.

M&L Powder coated of any colour (minimum thickness of powder coating 50micron) anodised aluminium frames for doors, windows with one or more rebates including jointing cleats for fixing etc. complete all as specified and directed by Engr-in-Charge.

S&F Factory made single extruded 100% solid WPC (Wood Polymer Composite) laminated wiremesh door shutter 30mm thick and required size comprising of virgin polymer of K value 57-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 2000 N (Face) & 1100 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant WPC to be laminate with PVC foil of min 14 mic. thick of approved design pasted to both faces of shutter. For fixing of Mosq mesh/XTN aluminium mesh/SS mesh combinly panel area of door except stile & rails to be panelled with mesh with self tapping round headed screws at required distance Scres and edges covered with feathered PVC edge beading alaround of mesh and fixing stainless steel butt hinges medium weight 100mm size with necessary full body threaded star headed counter sunk S.S screws including supply and fixing following items : (a) Stainless steel (304 Grade) butt hinges medium weight, 100mm size-04 per leaf) (b) Stainless Steel (304 Grade) Finished Square Tower Bolt 200mm long, dia 10mm - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos. perleaf (d) Stainless steel (304 grade ) 375mm rat tail rod pattern spring including roller and roller plate complete -01 Nos each shutter. (e) Stainless Steel (304 Grade) Finished sliding door bolt/aldrop bolt 300 mm long and 16mm dia - 1 Nos. per leaf complete all as specified and directed by Engineer-in-Charge. Note : 1: Test certificate of manufacturer to be provided by contractor . 2. Embossing with barcode of manufacturer engraved over each door frame and shutter is manadatory.

S&F for Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engr in Charge.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed by Engr in Charge.

S&F 5-6mm thick tinted toughened glass including necessary glazing clips/neoprene rubber packing/glazing putty and fixing arrangements in any size and shape complete all as specified and directed by Engr in Charge.

S&F 5 mm thick figured glass pin head type and glazing with oil putty in squares n.exc 0.50 sqm each complete all as specified and directed by Engr in Charge.

S&F in repairs stainless steel (304 grade) butt hinges “medium weight” 100mm size SS 202 complete all as specified and directed by Engr in Charge.

S&F Stainless Steel (304 Grade) Finished Square Tower Bolt 250mm long, dia 10mm complete all as specified and directed by Engr in Charge.

S&F Stainless Steel (304 Grade) Finished Square Tower Bolt 200mm long, dia 10mm complete all as specified and directed by Engr in Charge.

S&F stainless steel 202 grade finished sliding door bolt/ aldrop 16mm x 300mm with square knuckle, plate type with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed by Engr in Charge.

S&F 300 mm long, SS-304Grade stainless steel Helix door clouser, spring action type for door including roller, roller plate and rod complete all as specified and directed by Engr in Charge.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws including supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Square Tower Bolt 200mm long, dia 10mm - 2 nos per leaf (b) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos. perleaf (c) Stainless Steel (304 Grade) 100mm size and medium weight butt hinges - 3 nos per leaf complete all as specified and directed by Engineer-in-Charge. Note : 1: Test certificate of manufacturer to be provided by contractor . 2. Embossing with barcode of manufacturer engraved over each door frame and shutter is manadatory.

S&F in repair, vitreous china squatting pan "ORISSA" pattern white, of size 580x440mm with integral foot rest, CI 'P' trap etc complete all as specified and directed by Engr in Charge.

S&F wall hung WC with UF Seat Cover ,Hinges, Accessories Set Size 385 x 595 x385 white complete, including conncealed flushing cistern dual flush type with hanging arrangement, and necessarry accessories complete all as specified and directed by Engineer-in-Charge

S&F in repair, 10 ltr capacity low level PVC valveless, syphonic action type flushing cistern, white, with inlet, ball valve, flush pipe, PVC connection 15 mm dia and 450 mm long float and handle including bracket complete all as specified and directed by Engr in Charge.

Supply & fixing vitreous china urinal full stall type (minimum) with grating and union for discharge pipe, including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2) securing urinal to plugs with and including 60mm long brass screws, 32mm dia full threader PTMT waste coupling and 32 mm dia waste pipe and pointing around urinal back in cement mortar, including urinal spreader of PTMT suitable for fixing with 15mm dia pipe and including push tap high pressure of PTMT screwed for iron pipe 15mm bore (Minimum weight 47 gms) complete all as specified & directed by Engineer-in-Charge.

S&F Glass Shelf of 8mm thick fixed with and including chromim plated/SS 304 GRADE railing and Chromium plated brass screws and wooden/plastic cleats and fixing arrangements complete all as specified and directed by Engr in Charge.

S&F for chromiium plated/Stanless steel tubular towel rail 20mm dia, D type, 60 cm Long between flanges fixed with Stainless steel flanges and brass CP/SS Screws complete all as specified and directed by Engr in Charge.

Taking up or down 15mm dia, steel tubing & connections including cleaning for refining or removal to store complete all as specified and directed by Engr in Charge.

Taking up or down 20mm dia, steel tubing & connections including cleaning for refining or removal to store complete all as specified and directed by Engr in Charge.

Taking up or down 25mm dia, steel tubing & connections including cleaning for refining or removal to store complete all as specified and directed by Engr in Charge.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick wall/concrete structure complete all as specified and directed by Engr in Charge.

Supplying and laying 20 mm dia CPVC pipes fittings SDR 11 brass elbow/brass tee/MTA/MTBA/FTA/FTBA and like complete all as specified and directed by Engr in Charge.

Supplying and laying 25 mm dia CPVC pipes fittings SDR 11 brass elbow/brass tee/MTA/MTBA/FTA/FTBA and like complete all as specified and directed by Engr in Charge.

Supplying and laying 32 mm dia CPVC pipes fittings SDR 11 brass elbow/brass tee/MTA/MTBA/FTA/FTBA and like complete all as specified and directed by Engr in Charge.

S&Fin repairs 15mm Stop cock cast copper alloy, screwed down , high pressure, quarter or half turn type handle , screwed both ends for iron pipe or for unions, fancy type, chromium plated with long shank and cup ( concealed type) and fixed complete all as specified and directed by Engr in Charge.

S&F in repairs 15 mm dia chromiumplated premium quality fancy type Angle stop valves, with quarter or half turn type handle handles screwed down high pressure, screwed both ends for iron and fixed complete all as specified and directed by Engr in Charge.

S&F 25 mm dia stop valves, cast copper alloy with crutch or butterfly handles screwed down high pressure, screwed both ends for iron and fixed complete all as specified and directed by Engr in Charge.

S&F in repair 15mm Bib taps chromium plated fancy type with quarter turn/half turn handle , screwed down , scrwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engr in Charge.

S & F in repair 15mm dia brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed 3 in 1 system with bend set telephonic shower & 1.5mtr Tube with stand complete all as specified and directed.Prayag cat No-8550,parryware Cat No-G4636A1,CERA Cat No-F1005501, Prima Cat No-PME-6020 complete all as specified and directed by Engr in Charge.

M&L 75mm dia PVC (SWR) floor trap/multi floor trap, plain with grating including jointing with solvent cement with grating including jointing to pipe complete all as specified and directed by Engr in Charge.

M&L 450mmx110mm SS-304 (Stainless steel) bathroom floor channel with with grating including jointing arrangement to SWR pipe complete all as specified and directed by Engr in Charge.

S&F 15mm bore swivel joint shower rose of (Minimum weight 400 gms) Brass chromium plated shower rose 125mmx125mm size including CP shower arm 450/600mm (as directed) long complete all as specified and directed by Engr in Charge.

S&F grating doom 125 mm dia of Cromium plated complete all as specified and directed by Engr in Charge.

S&F 32mm bore dia discharge Bottle trap of CP Brass premium quality having minimum water seal of 25mm complete all as specified and directed by Engr in Charge.

S & F high density polythylene pipe(HDPE) of pressure rating 6 kgf/Sqcm fixed complete to walls ceiling or in floors etc bore of pipe 32mm complete all as specified and directed by Engr in Charge.

S&F frameless rectangular LED Mirror with touch switch 600mm x800mm/size as required, 5 mm thick glass mirror with double coat for protection and longevity grounded edges for safety and silver plating on the back for better reflection. mounted on wall with necessory fim complete all as specified and directed by Engr in Charge.

Suuply and fix in repairs vitreous china wash hand basin counter type white flat back of size 550mm X 400mm, fixed with a set of cast iron brackets including cutting and pinning in ends of brackets to wall, provision of 15mm size pillar mixer, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter "Hot or cold'' with long scrwed shanks and fly nuts, 32mm dia brass chromium plated waste fittings 450mm long PVC connection of 15mm size with PTMT nuts and 40mm dia waste pipe (As reqd) complete all as specified and directed by Engr in Charge.

Dismantling and lowering water tanks of capacity 500-2000 ltr and removing to store complete all as specified and directed by Engr in Charge.

S&F rotational molded polythylene water storage tank 2000 ltr capacity (Cylinderical vertical with closed top) white coloured, three layered premium quality tank hoisted and fixed in position including suitable uPVC tank Nipple for water tank complete all as specified and directed by Engr in Charge.

S&F rotational molded polythylene water storage tank 500 ltr capacity (Cylinderical vertical with closed top) white coloured, three layered premium quality tank hoisted and fixed in position including suitable uPVC tank Nipple for water tank complete all as specified and directed by Engr in Charge.

S&F rotational molded polythylene water storage tank 1000 ltr capacity (Cylinderical vertical with closed top) white coloured, three layered premium quality tank hoisted and fixed in position including suitable uPVC tank Nipple for water tank complete all as specified and directed by Engr in Charge.

S&F 25mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) complete all as specified and directed by Engr in Charge.

Taking down eaves gutter or rain water pipes, CI Pipes/PVC Pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks etc. complete all as specified and directed by Engr in Charge.

S&F 110mm bore uPVC (SWR) rain water pipe single socketed in any length with rubber ring joints, jointed with solvent fixed to wall /floor with matching PVC SWR rings including cutting holes and making good the disturbed portion with PCC (1:2:4) type B0 complete all as specified and directed by Engr in Charge.

S&F 110mm bore Door type uPVC (SWR) bends (suitable for rain water pipes) any radius complete all as specified and directed by Engr in Charge.

Supply and fix in repairs PVC connections 15mm size with PTMT nuts, 600mm long complete all as specified and directed by Engr in Charge.

S&F 75mm bore uPVC (SWR) rain water pipe single socketed in any length with rubber ring joints, jointed with solvent fixed to wall /floor with matching PVC SWR rings including stacking & cutting holes and making good the disturbed portion with PCC (1:2:4) type B0 complete all as specified and directed by Engr in Charge.

S&F uPVC (SWR) bends 110 mm dia (any radius) complete all as specified and directed by Engr in Charge.

S&F uPVC (SWR) bends 75 mm dia (any radius) complete all as specified and directed by Engr in Charge.

S&F uPVC (SWR) 110mm Branch pieces, single (equal or unequal),ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed by Engr in Charge.

S&F uPVC (SWR) 110mm Branch pieces, double (equal or unequal)/'Y'/double 'Y', ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed by Engr in Charge.

S&F uPVC (SWR) 75mm Branch pieces, single (equal or unequal),ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed by Engr in Charge.

S&F in repairs Stainless steel drapery curtain rod 25mm dia, fancy type, fabricated out of stainless steel sheet not less than 20 gauge, including brackets and pair of decorated end knobs (finials), stop roller etc, pretreated power coated natural color complete all as specified & directed by Engr-in-Charge.

M&L for Water proofing treatment to RCC sunken Slab as specified below and as directed by Engineer -in- Charge (A) 15mm plaster in cm 1:3 With Wpc on raised verticle surface (B) Cleaning the surface with wire brush / coirbrush , removing lose material like dust partucles dirt etc (C) creating fillet covering of 50X 50 mm with polymer modified mortar on the junction of slab and walls (D) Apply first coat of two component modified polymer coating on the horizontal and Verticale surface (E)Provision of glass fiber mesh of 2X2 mm immediately on above coating (F) Apply second coat of two component modified polymer coating after 72 Hrs (G) Laying concrete 1:4:8 over the coating as per requirment (H) joining the saintary pipes with the water proofing tape having bridgingability of more than 1.5mm (I)Filling the gap between the wall opening and saintary pipe with non shrink cementatious grout (K) Complete the treatment to be carried out by authorised applicator of water proofing manufacturer .

M&L cement concrete 1:5:10 Type E2 using 40mm graded aggregate as in mass filling complete all as specified and directed by Engr-in-Charge.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specifiedincluding dismantling of old sheets complete all as specified and directed by Engr in Charge.

M&L for repairs to chajja by removing cover and loose concrete from main reinforcement using wooden mallets/wire brush/waterjet to complete expose the reinforcement in the distressed portion of chajja etc (All loose unsound and cracked concrete should be removed (plan area of concrete surface to be measured) at any height/floor applying epoxy based bond coat using brush and applying polymer concrete (not less than 20 mm thick) in the proportion of (1:3:1) one part of cement 3 part of sand and 1 part of 10 mm and down stone aggregate using 8-10 kg of acrylic based polymer per 50 kg bag of cement all as manufacturer's instruction complete all as specified and directed by Engineer-in-Charge. Note: The rates should include necessary formwork, scaffolding for repair to work at any hieght/floor of building.

S & F for premium quality soap dish, Stainless steel, approximate size 150x60mm fixed with CP Brass screws complete all as specified and directed by Engr in Charge.

S&F 500x400 mm premium quality PVC Cabinet mirror fixed to wall with chromium plate brass screws and cup washers complete all as specified and directed by Engr in Charge.

S&F aluminium powder coated grill for window and ventilator of size 75x75mm x 3/4mm thick complete all as specified and directed by Engr in Charge.

S & F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.

S&F 19mm thick high Density High Moisture Resistant (HDHMR) exterior Grade Board with one side designer laminate (OSL) of approved colour and finishing and other side white balancing laminations with density of 850 Kg/cu.m including beading/leaping, necessary Z hinges /Hydraulic hinges - 03 per leaf, 100mm SS Grade 304 finished handles - 1 per leaf, 125mm SS 304 grade square tower bolt - 02 per leaf, 300mm long 10mm dia SS 304 grade wardrobe rail -01 each leaf complete all as specified and directed by Engr in Charge.

S&F in repairs 3.15mm dia Plain mild steel wire, galvanised class 3, in detached work such as for mosquito nets and fixing to strainingbolts, hooks, eyes,etc. pins, etc. (as directed (each line of wire to be measured) complete all as specified and directed by Engr in Charge.

Supply and fix in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe,flat edge (matt finish) bowl size 600mm x 450mmx220mm including waste coupling and waste pipe complete all as specified and directed by Engr in Charge.

Supply and fixing factory made uPVC white colour Two track two panels sliding door with fly proof S.S. wire mesh (One nos. glazed & one no. wire mesh panels) made of (big series) frame 122 x 54 mm & sash 47 x 80 mm both having wall thickness of 2.3 + 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) comprising of uPVC chambered frame, with in-built roller track and sash extruded profiles duly reinforced with 1.50 + 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required). stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fastener 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. Note : 1: Test certificate of manufacturer to be provided by contractor . 2. Embossing with barcode of manufacturer engraved over each door frame and shutter is manadatory.

M&L for Water proofing treatment to Toilet walls as specified below and as directed by Engineer -in- Charge (A) Cleaning the surface with wire brush / coirbrush , removing lose material like dust partucles dirt etc (B) Apply a coat of elastomerinc compound as a priming coat (C) apply 1st and 2nd coat of elastomeric comound as per manufacturer's instructions (D) Filling the gap between the wall opening and saintary pipe with non shrink cementatious grout (E) Complete the treatment to be carried out by authorised applicator of water proofing manufacturer.

Supply for Pipe Supporting Clamping for Four pipes of dia 110 mm (4"), 75 mm (3") and 40 mm (1 1/2") - 2 nos. down take pipes running togethar fixing done with Clamping System consists of Profile Bracket + Continuous Slotted C Channel + U Bolt Rubber Sleeve mounted System running vertically with wall distance 75 mm (3"): Note : Pipe Support Clamping made of: 1. Profile Bracket having Wall Distance 75 mm (3") made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 2. Continuous Slotted "C" Channel with ribs to be used of size 675 mm (27") made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079) are Hot Dip Galvanzied + Zn Al Flake coated with material thickness of 3mm. 3. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit : 1. Profile Bracket Wall distance 75 mm (3") - 2 Nos. 2. Continuous Slotted C Channel of Size 675 mm (27") - 1 No.; 3. U Bolt Rubber Sleeve mounted for 110 mm (4") Pipe Dia. - 1 No., U Bolt R/M for 75 mm (3") Pipe Dia. - 1 No., U Bolt R/M for 40 mm (1 1/2") Pipe Dia. - 2 No.; and 4. Fixing Nail Zn coated of thickness 6.5 mm and length 63 mm (2 1/2") - 4 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in Chief Engineer Bathinda Zone Technical Drawing (TD) of Factory Made Pipe Supporting System : DRG NO.- BTD-916.

Supply for Pipe Supporting Clamping - Single Pipe of dia 110 mm (4") down take pipe fixing done with Clamping System consists of Profile Bracket + Continuous Slotted C Channel + U Bolt Rubber Sleeve mounted System running vertically with wall distance 75 mm (3"): Pipe Support Clamping made of : 1. Profile Bracket having Wall Distance 75 mm (3") made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 2. Continuous Slotted "C" Channel with ribs to be used of size 250 mm (10") made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079) are Hot Dip Galvanzied + Zn Al Flake coated with material thickness of 3mm. 3. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit : 1. Profile Bracket Wall distance 75 mm (3") - 2 Nos. 2. Continuous Slotted C Channel of Size 250 mm (10") - 1 No.; 3. U Bolt Rubber sleeve mounted for 110 mm (4") CI or PVC Pipe Dia. - 1 No.; and 4. Fixing Nail Zn coated of thickness 6.5 mm and length 63 mm (2 1/2") - 4 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in Chief Engineer Bathinda Zone Technical Drawing (TD) of Factory Made Pipe Supporting System : DRG NO.- BTD-916.

Taking down carefully aluminium point wiring (light, fan, socket or power, bell complete fitting such as sockets, ceiling roses, pendants, batten holders, regulators and making good the disturbed surfaces of wall, floors, ceiling in CM 1:3 etc complete all as specified and directed by Engineer - in - Charge.

M & L for concealed conduit point wiring complete for light/ fan on independent /combine board with cable 2.5 sqmm (Nominal area) FRLSH PVC insulated multistranded unsheathed copper conductor, drawn in and including PVC Concealed conduit pipe medium grade 20 mm dia, pipe hooks , elbows, juction covers and junction boxes , after cutting in wall chasing for conduits and sinking's for modular metal flush boxes suitable length and Min 1.6 mm thickness, Min 51 mm depth for mounting, switches, sockets,fan regulator with modular cover plate with frame and making the good disturbed surfaces of wall in CM 1:3 with white wash or existing colour including provision of continuous earth continuity conductor along with point wiring of 2.5 sqmm copper PVC insulated cable for one light/ fan point controlled by one switch and connected to common earth dolly, complete all as specified and direced by the Engineer in charge.

All as per Srl item No -125 here in before but for one switch socket combination 5/6 amp on independent board complete all as specified and directed by Engineer - in - Charge.

All as per Srl item No -125 here in before but for one three pin socket outlet 5 Amp on same board with other switches complete all as specified and directed by Engineer - in - Charge.

All as per Srl item No. 125 here in before but for one switch socket combinationt 6 pin 5/ 15 Amps on independent board with copper conductor 2.5 Sqmm complete all as specified and directed by Engineer - in - Charge.

All as Srl item No. 125 here in before but for one light point controlled by two 2 ways switches complete all as specified and directed by Engineer - in - Charge.

S & F switch 2 way 6A complete all as specified and directed by Engineer - in - Charge.

S & F modular switch 5/6 Amps single pole one way,one module complete all as specified and directed by Engineer - in - Charge.

S&F modular socket, 6/16 Amps, 2/3 pin combined 2 module complete all as specified and directed by Engineer - in - Charge.

S&F modular Socket outlet 2 in 1, 3 pin, 5A complete all as specified and directed by Engineer - in - Charge.

S&F module switch 1 way 16 A, 1 module complete all as specified and directed by Engineer - in - Charge.

S & F ceiling rose surface bakelite three terminals complete all as specified and directed by Engineer - in - Charge.

S & F in replacement of existing light fitting with LED batten 20W LED batten with 'Eye Soft' technology & glarefree diffuser for perfect application in modern homes or aliminium housing and integrated electronic driver, 20 watt having input voltage AC140-300V, 50 Hz , 6500K, and all other accessories including connection with flexible cable copper conductor twin core of size 23/.2 mm upto ceiling rose/connector complete all as specified and directed by Engineer - in - Charge.

S&F in replacement security light fitting LED TYPE 25 watt with all necessary acessories, Clear transparent acrylic cover, prewire suitable to operated on 230 volt 50 HZ AC & Supply and fixing to wall / on pole including fixing arrangement with suitable galvanized iron pipe “light grade” brackets 2 mtr length bent to shape to obtained required shape including clamps, nuts / bots / washers etc connecting with suitable flexible copper wire of size 23/0.0076 complete all as specified and directed by Engineer - in - Charge

S & F in replacement angle holder insulated body with back plate for conduit fittings complete all as specified and directed by Engineer - in - Charge

S&F LED lamp 9W for angle holder complete all as specified and directed by Engineer - in - Charge.

S & F modular stepped type, fan regulator not less than 120 watt for ceiling fan 1200/1400mm sweep complete all as specified and directed by Engineer - in - Charge

Taking down fan, ceiling cable end, dismantling blades and removing fan and blades to store complete all as specified and directed by Engineer - in - Charge.

S & F in repair compact & decorative energy efficient LED mirror light fitting with antiglare diffuser and decorative end caps suitable for 1X10 watt fitting 2 ft version including LED lamp 10 watt complete all as specified and directed by Engineer - in - Charge.

S & F of sub-main wiring with two single core cables PVC insulated and un-sheathed 6 sqmm (Nominal Area) FRLSH stranded copper conductor drawn in and including steel dia 25mm “medium quality” conduit including 6.00 Sq mm (Nominal Area) copper cable as earth continuity conductor after chasing in wall and making good the disturbed surfaces and white wash or existing colour , necessary junction box and covers including necessary connections, PVC flexible pipes are used in pannel board while connecting the cable complete all as specified and directed by Engineer - in - Charge.

S & F in repairs sheet metal enclosure for double door DBs made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SPN 8 ways, 240 Volts, ISI marked 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed by Engineer - in - Charge.

S & F in repairs MCB ‘C’ series type suitable for 240 volts, AC supply 32 Amps, S P & N with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge.

S & F in replacement MCB ‘B’ series type suitable for 240 volts,10 KA, AC supply 20 Amps , single pole (SP) with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge.

S&F in replacement Sheet metal enclouser for doble door Vertical DBs made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mouting VTPN 6 Way 415 Volt ISI marked 250Amps busbar stove enameled dust and vermin proof,IP:43 protection suitable for incorporation FP MCCB(V-Tech) N3 Frame upto 250A ,Isolators and including give connection with wire and cable etc complete all as specified and directed by Engineer-in-Charge.

S&F in replacement MCCB four pole 63 Amps with breaking capcity 16kA, Fixed TM and 415 volts AC Supply ISI marked complete all as specified and directed by Engineer - in - Charge.

M&L for earthing in replacement complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6.0mm thick buried directly in ground vertically to a depth not less than 2.25 meter below ground level with top edge of earth plate at a depth not less than 1.5 meter below ground level, earth plate surrounded by 15cm thick packed layer of charcoal dust and common salt, connected to galvanized iron strip 32mm x 6mm thick as earth lead by means of bolts, nuts and washers of galvanized iron or steel and thimbles and other end of the earth strip connected to earthing test point/equipment and protected by galvanized iron pipe light grade 40mm dia. up to earthing test point/equipment fixed with required number of mild steel clamp made out of 25mm x 3mm flat iron and perforated water pipe 20mm dia. GI medium grade of length 2.25 meter and top with socket & plug and bottom connected to earth plate by slit and two bolts/nuts/washers, PCC chamber in cement concrete (1:2:4) type B-1 and 40mmthick pre-cast RCC (1:2:4) type B-0 cover with 40mm x 40mm x 6mm MS angle iron frame, excavation & earth work complete all as shown in electrical plate No. 3 of MES Schedule Part-I of SSR-2009. Complete all as specified and directed by Engr-in-charge. Notes: - (i) GI strip up to earth test point/equipment is included in this item. (ii) Outer edge of earth pit chamber shall be 1.5 meter away from the outer edge of PCC chamber. (iii) Minimum weight of reinforcement shall be 1 kg for each earth pit cover

Please Enable Macros to View BoQ information