Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
| 2 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
| 3 | Admitted-Fee/PreQual/Technical/Finance SIMILIGUDA BHEJAPUT DAMANJODI DAMANJODI KORAPUT ODISHA 763008 | KORAPUT | ODISHA | 763008 | Admitted-Fee/PreQual/Technical/Finance |
| 4 | Admitted-Fee/PreQual/Technical/Finance A 277 SECTOR 2 NALCOTOWNSHIP DAMANJODI DAMANJODI KORAPUT ODISHA 763008 | KORAPUT | ODISHA | 763008 | Admitted-Fee/PreQual/Technical/Finance |
| 5 | Admitted-Fee/PreQual/Technical/Finance SATASANG SATASANG BHEJAPUT DAMANJODI DAMANJODI KORAPUT ODISHA 763008 | KORAPUT | ODISHA | 763008 | Admitted-Fee/PreQual/Technical/Finance |
Tender Value
Refer Docs
EMD Value
₹20,000
Closing Date
7 Nov 2022, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GM(TnC)
TnC Deptt., Alumina Refinery, NALCO, Damanjodi
CONSTRUCTION OF SERVANT ROOMS IN LEFT OUT D TYPE QUARTERS AT NALCO TOWNSHIP, DAMANJODI.
2022_NALCO_718994_1
TnC/AR/03/eC-2457
Limited
Miscellaneous Works
Item Rate
365 days
Alumina Refinery, NALCO, Damanjodi
As per tender document
7 documents required · 7 mandatory
₹0
₹20,000
Yes
11 Nov 2022
20 Oct 2022
11 Nov 2022
20 Oct 2022
7 Nov 2022
20 Oct 2022
Amount
2.1) Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth upto 50 m and lift upto 1.5 m, disposed soil to be levelled and neatly dressed as per instruction of Engineer-in-Charge. 2.1.1) All kinds of soil
2.8) Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 2.8.1) All Kind of Soil
2.25) Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
4.1) Providing and laying plain cement concrete at all depths below and upto ground level in foundations, fillings, non-suspended floors including tamping, curing etc. but excluding the cost of centering and shuttering etc. as specified or directed in any shape, position, thickness and finishing the top surface rough or smooth etc.all complete up to Plinth Level (CEMENT & FLY ASH WILL BE ISSUED FREE OF COST AT NALCO'S STORE/ISSUE POINT INSIDE PLANT.) 4.1.5) P.C.C.1:3:6 (1cement: 2coarse sand: 4graded stone aggregate 20 mm nominal size)
4.1) Providing and laying plain cement concrete at all depths below and upto ground level in foundations, fillings, non-suspended floors including tamping, curing etc. but excluding the cost of centering and shuttering etc. as specified or directed in any shape, position, thickness and finishing the top surface rough or smooth etc.all complete up to Plinth Level (CEMENT & FLY ASH WILL BE ISSUED FREE OF COST AT NALCO'S STORE/ISSUE POINT INSIDE PLANT.) 4.1.13) P.C.C. 1:2½:4:11 (1 ordinary portland cement : 2½ fly ash : 4 coarse sand : 11 graded stone aggregate 40 mm nominal size)
5.1) Providing and laying cement concrete for all RCC works with maximum 20mm size hard granite stone aggregate in roofs, including slope roof, stair case,landing slabs, canopies, chajjas, bands,lintels,beams,lofts,projections,manhole covers,valve chambers, retaining walls, abutments, foundation rafts etc. as per drawing, specification and direction of Engineer-in-Charge at all heights including mechanical vibration for consolidation, curing for 3 weeks excluding cost of shuttering and steel reinforcement.The rate will be inclusive of finishing and plastering the exposed surfaces with cement mortar 1:3(1cement: 3 fine sand) of thickness not exceeding 6mm to give a smooth and even surface (CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE.) 5.1.2) Same as above item in 1:1.5:3(1cement:1.5 coarse sand:3stone aggregate 20mm & down size) up to plinth level
5.1) Providing and laying cement concrete for all RCC works with maximum 20mm size hard granite stone aggregate in roofs, including slope roof, stair case,landing slabs, canopies, chajjas, bands,lintels,beams,lofts,projections,manhole covers,valve chambers, retaining walls, abutments, foundation rafts etc. as per drawing, specification and direction of Engineer-in-Charge at all heights including mechanical vibration for consolidation, curing for 3 weeks excluding cost of shuttering and steel reinforcement.The rate will be inclusive of finishing and plastering the exposed surfaces with cement mortar 1:3(1cement: 3 fine sand) of thickness not exceeding 6mm to give a smooth and even surface (CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE.) 5.2.2) Same as above item in 1:1.5:3(1cement:1.5 coarse sand:3stone aggregate 20mm & down size) above plinth level up to Floor V Level
5.9) Providing and fixing, centering and shuttering including curved, hexagonal and such other shaped shuttering for following as directed including strutting, bracing, propping etc. keeping the same in position during concreting and removal of the same after specified period etc. complete for all depths and heights. 5.9.1) Foundations, footings, bases of columns, etc up to plinth.
5.9) Providing and fixing, centering and shuttering including curved, hexagonal and such other shaped shuttering for following as directed including strutting, bracing, propping etc. keeping the same in position during concreting and removal of the same after specified period etc. complete for all depths and heights. 5.9.5) Lintel beams,plinth beams,cantilevers..
5.9) Providing and fixing, centering and shuttering including curved, hexagonal and such other shaped shuttering for following as directed including strutting, bracing, propping etc. keeping the same in position during concreting and removal of the same after specified period etc. complete for all depths and heights. 5.22.3) Bending / Binding and placing in position high yield deformed bars reinforcement conforming to IS:1139 or cold twisted deformed bars reinforcement conforming IS:1786 for R.C.C. work at all height and depths, carting the same from store / issue points to site of work, straightening, cleaning, bending to required shape and lengths as per details, including supplying and binding with contractor's own 16 SWG soft annealed binding wire and placing with proper cover blocks, supports, chairs, spacers and return of unused / scrap / unserviceable steel to owner's storagepointetc.allcomplete. [REINFORCEMENT STEEL / TOR STEEL SHALL BE ISSUED FREE OF COST AT NALCO'S STORE]
6.1.2) Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) in any shape including curing, all complete in Cement mortar (1:6) (CEMENT SHALL BE ISSUED FREE OF COST FROM INSIDE PLANT NALCO'S STORE.)
6.4.2) Providing & laying of Fly Ash Brick masonry in superstructure, in any shape including scaffolding, staging, curing, all complete in Cement mortar (1:6) (CEMENT / FLY ASH BRICK SHALL BE ISSUED FREE OF COST FROM INSIDE PLANT NALCO'S STORE.)
11.3.1) Providing & laying cement flooring 40mm thick with 1:2:4 (1cement: 2finesand: 4graded stone aggregate of 20mm & down size) finished with a floating coat of neat cement including cement slurry, rounding off edges and strips, curing, including providing and fixing 40 x 4mm glass strips for making panels etc. all complete. (CEMENT SHALL BE ISSUED FREE OF COST FROM NALCO'S STORE).
9.48.1) Providing,fabricating, making, transporting to site and erecting of ornamental structural steel work like gates, doors, windows, grills, ventilators, trusses, in built up sections by welded/bolted/rivetted with M.S. bars, tees, angles, flats,chanels,C.Q.plates,pipes and box or hollow sections etc. as per specification and direction of Engineer-in-charge including priming coat with approved steel primer etc.all completefor all heights and depths . (STRUCTURAL STEEL/ALL MATERIALS WILL BE PROCURED BY THE AGENCY).
9.21.1) Providing & fixing ISI marked flush door shutters conforming to IS:2202(Part-1) non-decoretive type,core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws, all complete as per the direction of Engineer-in-charge.
10.14.3) Providing and fixing pressed steel door frames (Profile E) type conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strikeplate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in- charge. 10.14.3.1) Same as above but for fixing with adjustable lugs with split end tail to each jamb
13.1.2) Providing and laying 12mm thick cement plaster in cement mortar 1:6 (1cement:6sand) including applying water to surface before plastering, scaffolding, curing up to 7 days etc. all complete for all height/depth etc. all completed as per the direction of Engineer-in-charge. (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE).
13.16.1) Providing and laying 6 mm cement plaster in cement mortar 1:3 (1 cement: 3 sand) on concrete/masonry surfaces including cleaning , hacking concrete surfaces, scaffolding , providing drip mould if required, watering, curing etc. complete for all heights etc. all completed as per the direction of Engineer-in-charge. (CEMENT SHALL BE ISSUED FREE OF COST FROM NALCO'S STORE).
13.42.1) Distempering with 1st quality acrylic washable distemper( ready mixed ) of approved make, after applying one coat of cement primer on walls and ceiling etc. of approved brand and manufacture on new work with approved shade to give an even shade complete up to the satisfaction of Engineer-in-charge, as per manufacture's specification,including scaffolding,all complete. Area must be cleaned off spilled paints etc. after completion of painting works.
13.46.1) Providing and applying Acrylic Smooth exterior paint approved make & shade on walls etc. by applying @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm, to give an even shade after removing the foreign particle with wire brush etc. ( where ever required) on new work as specified at all heights including all labour , tools , tackles scaffolding , consumables and materials required for the work and as directed by the Engineer-in-charge.
13.61.1) Painting two or more coats with synthetic enamel paint of approved brand and manufacture in all shades on all types of surface like steel/wood/concrete/plaster/for lettering etc. all complete up to the direction of Engineer-in-Charge.
13.80) Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth etc. all complete as directed by the Engineer-in-charge
17.1.1) Providing and fixing White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests each (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required etc. all complete as per the direction of Engg-In-Charge
17.7.10) Providing & fixing Stainless Steel AISI-304(18/8) Round basin 405x355 mm with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required etc. all completed as per the direction of Engg-In-Charge.
17.29) Providing & fixing of (Size 100mm x 100mm) sand cast iron gratings for gully , Nahni trap including all materials and labours etc. all completed as per the direction of Engg-in-charge.
17.31) Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers etc. all completed as per the direction of Engg-In-Charge.
17.33) Providing and fixing 600 x 120 mm glass shelf edges rounded off supported on anodised aluminium angles frame with C.P brass brackets and guard rail complete fixed to wooden cleats with C.P. brass screws and washers etc. all completed as per the direction of Engg-in-charge.
12.41) Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(Single socketed pipes.)etc. all completed as per the direction of Engg-in-charge. 12.41.2) 110 mm diameter
12.42) Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion etc. all completed as per the direction of Engg-in-charge. 12.42.1) Coupler 110mm dia
12.42) Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion etc. all completed as per the direction of Engg-in-charge. 12.42.5) Bend 87.5° 110mm dia
12.42) Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion etc. all completed as per the direction of Engg-in-charge. 12.42.3.1) 75x75x75 mm Single tee with door
12.42) Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion etc. all completed as per the direction of Engg-in-charge. 12.42.3.2) 110x110x110 mm Single tee with door
12.42) Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion etc. all completed as per the direction of Engg-in-charge. 12.42.4.1) 75x75x75 mm Single tee without door
12.42) Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion etc. all completed as per the direction of Engg-in-charge. 12.42.4.2) 110x110x110 mm Single tee without door
12.42) Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion etc. all completed as per the direction of Engg-in-charge. 12.42.6.2) 110 mm Shoe (Plain)
19.6.2) Supplying ,laying of sewerage line with 150 mm dia.R.C.C. Hume pipe with stiff mixture of cement mortar 1:1 (1 cement: 1 fine sand) after cleaning the pipes matching the slopes including testing of pipes, packing of gaskets inside the collar, all matertials ,labour, tools, tackles etc. complete as per the direction of Engineer-in-Charge. (CEMENT SHALL BE ISSUED FREE OF COST FROM NALCO'S STORE).
17.39.1.1) Supplying,fixing of Cast iron bend of required degree with access door,as per IS:1729, inspection rubber washer etc.of 100 mm dia., etc. all completed as per the direction of Engg-in-charge.
17.60.1.1) Providing & fixing of 100 mm inlet and 100 mm outlet sand cast iron traps of self cleansing design with screwed down or hinged grating with or with out vent arm complete, including cost of cutting and making the good the wall &floors, as per IS:3989,etc. all completed as per the direction of Engg-in-charge.
17.43.1.1) Providing and fixing Sand cast Iron single equal plain junction of required degree with access door,insertion rubber washer 3 mm thick, bolts and nuts complete of 100 x 100 x100 mm size, as per IS:1729,etc. all completed as per the direction of Engg-in-charge.
17.38.1.1) Supplying,fixing of Cast iron bend of required degree, as per IS:1729, of 100 mm dia., all complete.etc. all completed as per the direction of Engg-in-charge.
18.17) Providing and fixing gun metal gate valve with C.I. wheel of approved make(screwed end ).etc. all completed as per the direction of Engg-in-charge. 18.17.1) 25 mm nominal bore
18.17) Providing and fixing gun metal gate valve with C.I. wheel of approved make(screwed end ).etc. all completed as per the direction of Engg-in-charge. 18.17.1) 25 mm nominal bore
18.54.1) Supplying ,fixing of 15mm nominal bore, 86 mm long, weighing not less than 88 gms PTMT Bib cock / Stop cock of approved make & design etc. all completed as per the direction of Engg-in-charge.
18.63) Supplying ,fixing of 15mm PTMT angle stopcock of approved make & design,weighing not less than 85 gms etc. all completed as per the direction of Engg-in-charge.
18.53.1) Providing and fixing C.P.15 mm nominal bore brass angle valve for points of approved quality conforming to IS:8931 etc. all completed as per the direction of Engg-in-charge.
17.73.2) Providing and fixing PTMT 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms, complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.etc. all completed as per the direction of Engg-in-charge.
17.69.2 ) Providing and fixing PTMT Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms etc. all completed as per the direction of Engg-in-charge.
17.70.2) Providing and fixing PTMT Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms.etc. all completed as per the direction of Engg-in-charge.
18.8) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. 18.8.1) 15 mm nominal bore (Medium grade)
18.8) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. 18.8.2) 20 mm dia nominal bore (medium grade)
18.46) Providing & fixing GI fittings of approved make including all materials, labours,tools & tackles as per direction of Engineer-in- Charge. 18.46.1) GI union 15 mm dia size.
18.46) Providing & fixing GI fittings of approved make including all materials, labours,tools & tackles as per direction of Engineer-in- Charge. 18.46.2) GI union 20 mm dia size.
18.48) Providing and fixing of Polyethylene water storage tanks (11 nos.of 500 litre capacity) of approved make with all fitting,cover and suitable locking arrangement including inlet, outlet,over flow, and scource arrangements and puting the tanks in different elevation/floor as per requirement including all materials, tools & tackles, all labours etc. all complete as per the direction of Engineer-in-charge.
13.18) Providing and laying neat cement punning over the platsered/ concrete surfaces at the rate of 2.2 Kg. of cement for one square metre including curing etc. all completed as per the direction of E-I-C [CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE.]
19.7) Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design. 19.7.3.1) Same as above but for Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) with Fly ash bricks of class designation 7.5. (CEMENT / FLY ASH BRICK/ REINFORCEMENT STEEL SHALL BE ISSUED FREE OF COST AT NALCO'S STORE/ISSUE POINT INSIDE PLANT.)
19.21) Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. all completed as per the instruction of Engg-In-Charge.(CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE) 19.21.1) For pipes 100 to 250 mm diameter.
10.5.1) Providing and fixing 1mm thick M.S. sheet doors /windows with frame of M.S. angle 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners,all necessary fittings complete, including applying a priming coat of approved steel primer etc completed as per the direction of E-I-C.
22.14.1) Providing and laying grading concrete with (1cement:2 corse sand:4 graded stone aggrgates of 20 mm and down size) on roof with required thickness as directed by Engineer in charge, finished with 6mm thick cement plaster 1:3: and neat cement punning,including cleaning the surface,curing up to 15 days,at all hight/any floor,etc complete. (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE).
18.62.1) Providing and fixing 15 mm nominal bore, PTMT Ball cock, 105 mm long, weighing not less than 138 gms,of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D.plastic ball etc. all completed as per the direction of E-I-C.
Providing and fixing the following standarded anodised aluminium fittings of approved quality with necessary screws etc. all complete as per the direction of Engineer-in-charge. 9.95.3) aluminium butt hinges 100x75x4 mm
Providing and fixing the following standarded anodised aluminium fittings of approved quality with necessary screws etc. all complete as per the direction of Engineer-in-charge. 9.97.1) Tower bolt 300 x 10mm sizes.
Providing and fixing the following standarded anodised aluminium fittings of approved quality with necessary screws etc. all complete as per the direction of Engineer-in-charge. 9.97.2) Tower bolt 250x10 mm sizes.
Providing and fixing the following standarded anodised aluminium fittings of approved quality with necessary screws etc. all complete as per the direction of Engineer-in-charge. 9.96.1) Sliding door bolts 300mm x16mm sizes.
Providing and fixing the following standarded anodised aluminium fittings of approved quality with necessary screws etc. all complete as per the direction of Engineer-in-charge. 9.96.2 ) Sliding door bolts250x16 mm sizes
Providing and fixing the following standarded anodised aluminium fittings of approved quality with necessary screws etc. all complete as per the direction of Engineer-in-charge. 9.100.1) Handles 125 mm sizes.
Providing and fixing the following standarded anodised aluminium fittings of approved quality with necessary screws etc. all complete as per the direction of Engineer-in-charge. 9.100.2) Handles 100 mm sizes
M/S M H ZAMAN
PADMANAV NAYAK
R AND B CONSTRUCTION
M/s D.K JENA
BHIMASEN PANDA
M/S. BATAKRISHNA SAHOO
M/S PALEI CONSTRUCTION
S.V.ENGINEERING
BEBARTA BISOI
NSPP INDIA PRIVATE LIMITED
S K ENGINEERING WORKS
M/S SADASHIV ENTERPRISES
stage.html
html • 0.04 MB
finance_756358.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .