Loading
Loading…
Loading…
Tender Value
₹44.0 L
EMD Value
₹88,000
Closing Date
30 Mar 2026, 10:30 amClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
45 days
Expenditure
Capital (Works)
Above/Below/Par
GENERAL
34 conditions
Mandate form should be uploaded as per attached format in document tab.
GST : Tenderer has to fulfill GST Compliance as per Govt. norms
Tenderer may upload GST registration number and certificate
Tenderers will examine the various provisions of the CentralGoodsandServices Tax Act 2017(CGST) Integrated Goods and Service Tax Act. 2017 (UGST)/respective states Goods and Services Tax Act(SGST)also, as notified by/central/Sate Govt& as amended from time to time and applicable taxes before bidding Tenderer swill ensure that full benefit of Input Tax Credit(ITC)likely to be availed by them is duly considered while quoting rates
PAN Card: Tenderers are required to upload their Permanent Account Number (PAN) card
Contact details of tenderer: The Contractor shall submit their complete official address, e-mail address, telephone no., mobile no. and fax no. so that necessary communication can be made by the Railways as and when required
Employment/Partnership etc. of Retired Railway Employees: Detailed vide para 16 of Annexure-I of GCC 2022
Employment/Partnership etc. of Retired Railway Employees: (a) Should a tenderer i) be a retired Engineer of the gazetted rank or any other gazetted officer working before his retirement, whether in the executive or administrative capacity or whether holding a pensionable post or not, in the Engineering or any other department of any of the railways owned and administered by the President of India for the time being, OR ii) being partnership firm / joint venture (JV) / registered society / registered trust etc have as one of its partners a retired Engineer of the gazetted rank or any other gazetted officer working before his retirement, OR iii) being an incorporated company have any such retired Engineer of the gazetted rank or any other gazetted officer working before his retirement as one of its directors AND in case where such Engineer or officer had not retired from government service at least 1 year prior to the date of submission of the tender THEN the tenderer will give full information as to the date of retirement of such Engineer or gazetted officer from the said service and as to whether permission for taking such contract, or if the Contractor be a partnership firm or an incorporated company, to become a partner or director as the case may be, has been obtained by the tenderer or the Engineer or officer, as the case may be from the President of India or any officer, duly authorized by him in this behalf, shall be clearly stated in writing at the time of submitting the tender. b) In case, upon successful award of contract, should a tenderer depute for execution of the works under or to deal matters related with this contract, any retired Engineer of gazette rank or retired gazetted officer working before his retirement in the Engineering or any other department of any of the railways owned and administered by the President of India for the time being, and now in his employment, then the tenderer will ensure that retired Engineer or retired gazetted officer had retired from government service at least 1 year prior to the date of his employment with tenderer and in case he had retired from service within a year then he possesses the requisite permission from the President of India or any officer, duly authorized by him in this behalf, to get associated with the tenderer . c) Should a tenderer or Contractor being an individual, have member(s) of his family or in the case of partnership firm/ company / joint venture (JV) / registered society / registered trust etc. one or more of partners(s)/shareholder(s) or member(s) of the family of partner(s)/ shareholder(s) having share of more than 1% in the tendering entity employed in gazetted capacity in the Engineering or any other department of the railway, then the tenderer at the time of submission of tender, will inform the authority inviting tenders the details of such persons. If information as required as per 16.a), b), c) above has not been furnished, contract is liable to be dealt in accordance with provision of clause 62 of Standard General Condition of contract. Format for declaration in this regard is attached with the tender document.
Mention status of firm: Individual Firm / Proprietorship Firm / Partnership Firm/Private Ltd. Firm / Public Ltd. Firm OR Government Undertaking.
Performance Guarantee: (a)The successful bidder shall have to submit a Performance Guarantee (PG) within 21 (Twenty one) days from the date of issue of Letter of Acceptance (LOA). Extension of time for submission of PG beyond 21 (Twenty one) days and upto 60 days from the date of issue of LOA may be given by the Authority who is competent to sign the contract agreement. However, a penal interest of 12% per annum shall be charged for the delay beyond 21(Twenty one) days, i.e. from 22nd day after the date of issue of LOA. Further, if the 60thday happens to be a declared holiday in the concerned office of the Railway, submission of PG can be accepted on the next working day. In all other cases, if the Contractor fails to submit the requisite PG even after 60 days from the date of issue of LOA, the contract is liable to be terminated. In case contract is terminated railway shall be entitled to forfeit Bid Security and other dues payable to the contractor against that particular contract, subject to maximum of PG amount. In case a tenderer has not submitted Bid Security on the strength of their registration as a Startup recognized by Department of Industrial Policy and Promotion (DIPP) under Ministry of Commerce and Industry, DIPP shall be informed to this effect. The failed Contractor shall be debarred from participating in re-tender for that work. (b) The successful bidder shall submit the Performance Guarantee (PG) in any of the following forms, amounting to 5% of the original contract value:- (i) A deposit of Cash; (ii) Irrevocable Bank Guarantee; (iii) Government Securities including State Loan Bonds at 5% below the market value; (iv) Pay Orders and Demand Drafts tendered by any Scheduled Commercial Bank of India; (v) Guarantee Bonds executed or Deposits Receipts tendered by any Scheduled Commercial Bank of India; (vi) Deposit in the Post Office Saving Bank; (vii) Deposit in the National Savings Certificates; (viii) Twelve years National Defence Certificates; (ix) Ten years Defence Deposits; (x) National Defence Bonds and (xi) Unit Trust Certificates at 5% below market value or at the face value whichever is less. Also, FDR in favour of FA&CAO (free from any encumbrance) may be accepted.
The Performance Guarantee shall be submitted by the successful bidder after the Letter of Acceptance (LOA) has been issued, but before signing of the contract agreement. This P.G. shall be initially valid upto the stipulated date of completion plus 60 days beyond that. In case, the time for completion of work gets extended, the Contractor shall get the validity of P.G. extended to cover such extended time for completion of work plus 60 days. (d) The value of PG to be submitted by the Contractor is based on original contract value and shall not change due to subsequent variation(s) in the original contract value. (e) The Performance Guarantee (PG) shall be released after physical completion of the work based on 'Completion Certificate' issued by the competent authority stating that the Contractor has completed the work in all respects satisfactorily. (f) Whenever the contract is rescinded, the Performance Guarantee already submitted for the contract shall be encashed. (g) The Engineer shall not make a claim under the Performance Guarantee except for amounts to which the President of India is entitled under the contract (not withstanding and/or without prejudice to any other provisions in the contract agreement) in the event of: (i) Failure by the Contractor to extend the validity of the Performance Guarantee as described herein above, in which event the Engineer may claim the full amount of the Performance Guarantee. (ii) Failure by the Contractor to pay President of India any amount due, either as agreed by the Contractor or determined under any of the Clauses/Conditions of the Agreement, within 30 days of the service of notice to this effect by Engineer. (iii) The Contract being determined or rescinded under clause 62 of these conditions.
Security Deposit: The Security Deposit shall be 5% of the contract value. The Bid Security submitted by the Contractor with his tender will be retained/encashed by the Railways as part of security for the due and faithful fulfillment of the contract by the Contractor. Provided further that, if Contractor submits the Cash or Term Deposit Receipt issued from a Scheduled commercial bank of India or irrevocable Bank Guarantee Bond from a Scheduled commercial bank of India, either towards the Full Security Depositor the Part Security Deposit equal to or more than Bid Security, the Railway shall return the Bid Security, to the Contractor. Balance of Security Deposit may be deposited by the Contractor in cash or Term Deposit Receipt issued from Scheduled commercial bank of India or irrevocable Bank Guarantee bond issued from Scheduled commercial bank of India, or may be recovered at the rate of 6% of the bill amount till the full Security Deposit is recovered. Provided also that in case of defaulting Contractor, the Railway may retain any amount due for payment to the Contractor on the pending "on account bills" so that the amounts so retained (including amount guaranteed through Performance Guarantee) may not exceed 10% of the total value of the contract. The Irrevocable Bank Guarantee submitted towards Security deposit shall be initially valid up to the stipulated date of Maintenance period plus 60 days and shall be extended from time to time, depending upon extension of contract granted in terms of Clause 17A and 17B of the Standard General Conditions of Contract. Note: Security Deposit deposited in cash by the Contractor or recovered from the running bills of a Contractor or submitted by contractor as Term Deposit Receipt(s) can be refunded/returned to the contractor, in lieu of irrevocable Bank Guarantee bond issued from scheduled commercial bank of India, to be submitted by him, for an amount equal to or more than the already available Security Deposit, provided however that, in a contract of value less than Rs. 50 Crore, such refund/ return of the already available Security Deposit is permitted up to two times and in a contract of value equal to or more than Rs. 50 Crore, such refund / return of the already available Security Deposit is permitted up to three times.
Refund of Security Deposit: Security Deposit mentioned in sub clause (1) above shall be returned to the Contractor along with or after, the following: (a) Final Payment of the Contract as per clause 51.(1) and (b) Execution of Final Supplementary Agreement or Certification by Engineer that Railway has No Claim on Contractor and (c) Maintenance Certificate issued, on expiry of the maintenance period as per clause 50.(1), in case applicable. 16. (2) (ii) Forfeiture of Security Deposit: Whenever the contract is rescinded as a whole under clause 62 (1) of these conditions, the Security Deposit already with railways under the contract shall b e forfeited. However, in case the contract is rescinded in part or parts under clause 62 (1) of these conditions, the Security Deposit shall not be forfeited. 16.(3) No interest shall be payable upon the Bid Security and Security Deposit or amounts payable to the Contractor under the Contract, but Government Securities deposited in terms of SubClause 16.(4) (b) of this clause will be payable with interest accrued thereon
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Shramikkalyan portal:- (i) Contractor is to abide by the provisions of various labour laws in terms of above clause 54,55, 55-A and 55-B of Indian Railways Standard General Conditions of Contract. In order to ensure the same, an application has been developed and hosted on website 'www.shramikkalyan.indianrailways.gov.in'. Contractor shall register his firm/company etc. and upload requisite details of labour and their payment inthis portal. These details shallbe available in public domain. The registration /updation in Portal shall be done as under: (a)Contractor shall apply for one time registration of his company/firm etc. in the Shramikkalyan portal with requisite details subsequent to issue of Letter of Acceptance. Engineer shall approve the contractor's registration in the portal within 7 days of receipt of such request. (b)Contractor once approved by any Engineer, can create password with login ID (PAN No.) for subsequent use of portal for all Letter of Acceptances (LoAs)issued in his favour. (c)The contractor once registered on the portal, shall provide details of his Letter of Acceptances (LoAs)/ Contract Agreements on shramikkalyan portal within 15 days of issue of any LoA for approval of concerned Engineer. Engineer shall update (if required) and approve the details of LoA filled by contractor within 7 days of receipt of such request. (d)After approval of LoA by Engineer, contractor shall fill the salient details of contract labours engaged in the contract and ensure updating ofeach wage payment to them on shramikkalyan portal on monthly basis. (e)It shall be mandatory upon the contractor to ensure correct and prompt uploading of all salient details of engaged contractual labour & payments made thereof after each wage period. (ii)While processing payment of any'On Account Bill' or 'Final Bill' or release of 'Advances' or 'Performance Guarantee / Security deposit', contractor shall submit a certificate to the Engineer or Engineer's representatives that "I have uploaded the correct details of contract labours engaged in connection with this contract and payments made to them during the wage period in Railway's Shramikkalyan portal at 'www.shramikkalyan.indianrailways.gov.in' till____Month,____Year
Guarantee/Warrantee: The installation will be handed over to the Department after necessary testing and commissioning. The installation will be guaranteed against any defective design/ workman-ship. Similarly, the materials supplied by the contractor will be guaranteed against any manufacturing defect, inferior quality. The complete luminaire/LED bulb shall have replacement guarantee for satisfactory performance and manufacturing defects for a period of 60 months from the date of commissioning or 72 months from the date of supply whichever is earlier. For switch gear components and panels, warrantee should be 1year after date of installation , For all other items, the warrantee period will be for a period of 12 months from the date of handing over to the Department. Installation/ equipment or components thereof shall be rectified/repaired to the satisfaction of the Engineer-in-charge
Please read all the documents before submission of Tender.
Any other reputed make/ brand other than as mentioned in the explanatory note may be included during the execution of the works on an urgent basis/as per direction when needed with approval of competent authority.
Electrical work for Construction of (Type-II) quarters 10 numbers of staff quarters (6 nos at Bargachia & 4 nos at Amta.)
Elect-Chg-25-26-10Qtr-44
Elect-Chg-25-26-10Qtr-44
Open
Works - General
12 Months
Howrah, West Bengal
₹0
₹88,000
30 Mar 2026
3 Mar 2026
16 Mar 2026
146 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 44,01,838.98 | ||
| — | 350.00 | — | — | ||
| Concealed Wiring of light and fan point by 1.5 sq. mm, Single Core, Multistrand (22/0.3mm), Copper Conductor (flexible), Unsheathed, Flame Retardant Low Smoke and Halogen(FR- LSH), PVC insulated Cable of 1100V grade, Type-C PVC Compound as per IS 5831, Conforming to IS :694 - 2010 (Reaffirmed 2020), ISI marked. Earthing the point with 1.5 sq. mm, Single Core, Multistrand (22/0.3mm), Copper Conductor (flexible), Unsheathed, FR-LSH, PVC insulated Cable of 1100V grade, Type-C PVC Compound as per IS 5831, Conforming to IS :694 - 2010 (Reaffirmed 2020), ISI marked,through PVC Conduit Pipe of Nominal Size 20mm/25mm(as per site requirement) and in the length of 3 mtrs, Socket ended (at one end ), medium mechanical stress, White Color, Resistant to Flame Propagation to grade UL-94 V0, Conforming to IS 9537 (Part 3) 1983 (Reaffirmed Year : 2017) with amendment no. 2 or latest with ISI mark. Modular Electrical Switch, 6 A, 230 V, SP, 1 Way, 1 Module, Unenclosed type as per Clause no.7.1.3, Method of Activation of switch shall be of Rocker type as per Clause no. 7.1.5, Switch shall be Flush type as per Clause no.7.1.6 and shall be installed as per Design A mentioned in the Clause no.7.1.7, Current carrying material as per Clause no. 22.5, with cover made of tough non-ignitable insulating material and bare of tough non-ignitable insulating material or of vitrified ceramic material, Conforming to IS:3854/1997 (reaffirmed 2017) with latest amendments and ISI mark. including supply of all required materials like lamp holder,Aluminium, batten type, with shade carrier ring,ISI marked, Base: B-22 suitable for use at 250V, Conforming to IS: 1258(Rev.-3)-2005)with amdt-3. With BACK plate of 53 MM. Dia & 45 MM PCD.., ceiling rose, Modular type Socket outlet suitable for 3 pin plug, 6A, 230V, 2 Module, Shuttered (Operation of Shutter should be independant of Earthing Point), Cover made of tough Non-Ignitable insulating material, material of base -vitrified ceramic, Conforming to IS : 1293-2019, Amendment no. 1 or latest with ISI mark ,suitable moduler stainless steel JB box with moduler PVC cover , stainless steel switch Board with moduler PVC cover,PVC Spacers, PVC Saddles,PVC Bends, PVC Tees to be provided as and where required as per direction of consignee,. Provision of moduler fan regulator should be kept on switch board . The plate should include 2 blank space for further installation of switches.including stainless steel fastener, Pin Type Terminal End Lugs as per specification attached. All materilas would be as per latest specification as issued from HQ/GRC time to time if available or latest IS and IE rules which is available.Covers or cover parts or parts of them, which are intended to ensure protection against electric shock, shall be held in place at two or more points by effective fixings..The cost includes supply of all materials to complete job. ( Two 5-ampere socket point treated as one point). | — | — | — | 3,14,300 | |
| — | 1050.00 | — | — | ||
| "Concealed Sub circuit wiring by 2.5 sq. mm, Single Core, Multistrand (36/0.3mm), Copper Conductor(flexible), Unsheathed, Flame Retardant Low Smoke and Halogen (FR-LSH), PVC insulated Cable of 1100V grade, Type C PVC Compound as per IS 5831, Conforming to IS: 694- 2010(reaffirmed 2020), ISI marked. with 2.5Sq mm earthing wire of Single Core, Multistrand (36/0.3mm), Copper Conductor(flexible), Unsheathed, Flame Retardant Low Smoke and Halogen (FR- LSH), PVC insulated Cable of 1100V grade, Type C PVC Compound as per IS 5831, Conforming to IS: 694-2010(reaffirmed 2020), ISI marked. through PVC Conduit Pipe of Nominal Size 25mm and in the length of 3 mtrs, Socket ended (at one end ), medium mechanical stress, White Color, Resistant to Flame Propagation to grade UL-94 V0, Conforming to IS 9537 (Part 3) 1983 (Reaffirmed Year : 2017) with amendment no. 2 or latest with ISI mark with Supply & fixing of PVC Circular Box and Ceiling rose if required with connection from running circuit as per direction of Consignee. including stainless steel fastener, Pin Type Terminal End Lugs as per specification attached. All materilas would be as per latest specification as issued from HQ/GRC time to time if available or latest IS and IE rules which is available.The cost includes supply of all materials to complete the job. *Quantity per meter means-one meter conduit with 2 (two) meters Cu. cable of size 2.5 sq mm for phase & neutal and 1mtr of 2.5 Sq.mm PVC Cu. cable as earthing with Supply of PVC Circular Box and Ceiling rose as per direction of Consignee. | — | — | — | 1,91,709 | |
| — | 400.00 | — | — | ||
| "Concealed Sub circuit wiring by 4 sq. mm, Single Core, Multistrand (56/0.3mm), Copper Conductor (flexible), Unsheathed, Flame Retardant Low Smoke and Halogen(FR-LSH), PVC insulated Cable of 1100V grade, Type C PVC Compound as per IS 5831, Conforming to IS :694 - 2010 (Reaffirmed 2020), ISI marked with 4 Sq mm earthing wire of Single Core, Multistrand (56/0.3mm), Copper Conductor (flexible), Unsheathed, Flame Retardant Low Smoke and Halogen(FR-LSH), PVC insulated Cable of 1100V grade, Type C PVC Compound as per IS 5831, Conforming to IS :694 - 2010 (Reaffirmed 2020), ISI marked through PVC Conduit Pipe of Nominal Size 25mm and in the length of 3 mtrs, Socket ended (at one end ), medium mechanical stress, White Color, Resistant to Flame Propagation to grade UL-94 V0, Conforming to IS 9537 (Part 3) 1983 (Reaffirmed Year : 2017) with amendment no. 2 or latest with ISI mark including stainless steel fastener, Pin Type Terminal End Lugs as per specification attached. All materilas would be as per latest specification as issued from HQ/GRC time to time if available or latest IS and IE rules which is available.The cost includes supply of all materials to complete the job. *Quantity per meter means-one meter conduit with 2 (two) meters Cu. cable of size 4 sq mm for phase & neutal and 1mtr of 4 Sq.mm PVC Cu. cable as earthing. | — | — | — | 88,112 | |
| — | 200.00 | — | — | ||
| "Concealed Sub circuit wiring by 6 sq. mm, Single Core, Multistrand (84/0.3mm), Copper Conductor (flexible), Unsheathed, , Flame Retardant Low Smoke and Halogen(FR-LSH), PVC insulated Cable of 1100V grade, Type C PVC Compound as per IS 5831, Conforming to IS :694 - 2010 (Reaffirmed 2020), ISI marked with 6 Sq mm earthing wire of Single Core, Multistrand (84/0.3mm), Copper Conductor (flexible), Unsheathed, , Flame Retardant Low Smoke and Halogen(FR-LSH), PVC insulated Cable of 1100V grade, Type C PVC Compound as per IS 5831, Conforming to IS :694 - 2010 (Reaffirmed 2020), ISI marked through PVC Conduit Pipe of Nominal Size 25mm and in the length of 3 mtrs, Socket ended (at one end ), medium mechanical stress, White Color, Resistant to Flame Propagation to grade UL-94 V0, Conforming to IS 9537 (Part 3) 1983 (Reaffirmed Year : 2017) with amendment no. 2 or latest with ISI mark including stainless steel fastener, Pin Type Terminal End Lugs as per specification attached. All materilas would be as per latest specification as issued from HQ/GRC time to time if available or latest IS and IE rules which is available.The cost includes supply of all materials to complete the job. *Quantity per meter means-one meter conduit with 2 (two) meters Cu. cable of size 6 sq mm for phase & neutal and 1mtr of 6 Sq.mm PVC Cu. cable as earthing with Supply of PVC Circular Box and Ceiling rose as per direction of Consignee." | — | — | — | 57,186 | |
| — | 200.00 | — | — | ||
| "Concealed Three Phase Sub circuit wiring by 10 sq. mm, Single Core, Multistrand (80/0.4mm), Copper Conductor (flexible), Unsheathed, Flame Retardant Low Smoke and Halogen (FR-LSH), PVC insulated Cable of 1100V grade, Type C PVC Compound as per IS 5831, Conforming to IS :694 - 2010 (Reaffirmed 2020), ISI marked with 6 Sq mm earthing wire of Single Core, Multistrand (84/0.3mm), Copper Conductor (flexible), Unsheathed, Flame Retardant Low Smoke and Halogen (FR-LSH), PVC insulated Cable of 1100V grade, Type C PVC Compound as per IS 5831, Conforming to IS :694 - 2010 (Reaffirmed 2020), ISI marked through PVC Conduit Pipe of suitable size and in the length of 3 mtrs, Socket ended (at one end ), medium mechanical stress, White Color, Resistant to Flame Propagation to grade UL-94 V0, Conforming to IS 9537 (Part 3) 1983 (Reaffirmed Year : 2017) with amendment no. 2 or latest with ISI mark including stainless steel fastener, Pin Type Terminal End Lugs as per specification attached. All materilas would be as per latest specification as issued from HQ/GRC time to time if available or latest IS and IE rules which is available.The cost includes supply of all materials to complete the job. *Quantity per meter means-one meter conduit with 4 (two) meters Cu. cable of size 10 sq mm for three phase & neutal and 1mtr of 6 Sq.mm PVC Cu. cable as earthing. | — | — | — | 2,06,000 | |
| — | 30.00 | — | — | ||
| "Supply of modular PC Board consisting of 03 nos. switches with inbuilt LED indication, 03 nos. sockets and modular SP MCB 10A, 10kA, Type B- 01 No. with Stainless Steel 12M Box and all other accessories to complete job for concealed wiring. Specs: Modular Electrical Switch, 6 A, 230 V, SP, 1 Way, 1 Module, Unenclosed type as per Clause no.7.1.3, Method of Activation of switch shall be of Rocker type as per Clause no. 7.1.5, Switch shall be Flush type as per Clause no.7.1.6 and shall be installed as per Design A mentioned in the Clause no.7.1.7, Current carrying material as per Clause no. 22.5, with cover made of tough non-ignitable insulating material and bare of tough non-ignitable insulating material or of vitrified ceramic material, Conforming to IS:3854/1997 (reaffirmed 2017) with latest amendments and ISI mark and Modular type Socket outlet suitable for 3 pin plug, 6A, 230V, 2 Module, Shuttered (Operation of Shutter should be independant of Earthing Point), Cover made of tough Non-Ignitable insulating material, material of base -vitrified ceramic, Conforming to IS : 1293-2019, Amendment no. 1 or latest with ISI mark. with modular SP MCB 10A, 10kA, Type B- 01 No. ISI marked, rated voltage: 240V AC, conforming to IS/IEC 60898-1:2015 (Reaffirmed Year:2024) or latest, with rated short circuit current capacity 10KA, fixed unadjustable time current characteristics suitable for use in protection of industrial, commercial and domestic electrical installations. along with 12M stainless steel Box, moduler cover plate and Stainless Steel boxes and all other accessories including stainless steel fastener, Pin Type Terminal End Lugs to complete job as per specification attached or with latest amendment or specification issued from HQ/GRC if any time to time. | — | — | — | 50,975.7 | |
| — | 30.00 | — | — | ||
| Fixing and commissioning of modular PC Board consisting of 03 nos. switches with inbuilt LED indication, 03 nos. sockets and modular SP MCB 10A, 10kA, Type B- 01 No. with Stainless Steel 12M Box, moduler cover plate duly Concealed in wall surface including all other accessories to complete job with latest amendment or specification issued from HQ/GRC if any time to time, including stainless steel fastener, Pin Type Terminal End Lugs as per specification attached. (Wiring will be covered under Shedule item No. as per site requirement). | — | — | — | 785.4 | |
| — | 40.00 | — | — | ||
| "Supply of modular electrical switches and accessories with 6A/16 A, 6 Pin Socket, with Stainless Steel boxes and all other accessories to complete job for concealed wiring. Specs: Modular Electrical Switch, 16 A, 230 V, SP, 1 Way, 1 Module, Unenclosed type as per Clause no.7.1.3, Method of Activation of switch shall be of Rocker type as per Clause no. 7.1.5, Switch shall be Flush type as per Clause no.7.1.6 and shall be installed as per Design A mentioned in the Clause no.7.1.7, Current carrying material as per Clause no. 22.5, with cover made of tough non-ignitable insulating material and bare of tough non-ignitable insulating material or of vitrified ceramic material, Conforming to IS:3854/1997 (reaffirmed 2017) with latest amendments and ISI mark, Modular type Socket outlet, 6 pin, 6A & 16A, 230V, 2 Module, Shuttered (Operation of Shutter should be independent of Earthing Point), Cover made of tough Non-Ignitable insulating material, material of base -vitrified ceramic, Conforming to IS : 1293-2019, Amendment no. 1 or latest with ISI mark, with moduler cover plate and Stainless Steel boxes and all other accessories including stainless steel fastener, Pin Type Terminal End Lugs to complete job as per specification attached or with latest amendment or specification issued from HQ/GRC if any time to time. | — | — | — | 52,640 | |
| — | 40.00 | — | — | ||
| Fixing and commissioning of modular electrical switches and accessories with 6A/16 A, 6 Pin Socket, with Stainless Steel boxes, moduler cover plate duly Concealed in wall surface including all other accessories to complete job with latest amendment or specification issued from HQ/GRC if any time to time, including stainless steel fastener, Pin Type Terminal End Lugs as per specification attached. (Wiring will be covered under Shedule item No. as per site requirement). | — | — | — | 1,391.2 | |
| — | 20.00 | — | — | ||
| "Supply of DP 16 Amps, 10kA MCB, Type- C with 2PP with sheet steel powder painted enclosure. | — | — | — | 12,328 | |
| — | 20.00 | — | — | ||
| Fixing and commissioning of DP 16 Amps, 10kA MCB with sheet steel powder painted enclosure with wiring and necessary item as per site requirement to complete job. | — | — | — | 1,232.8 | |
| — | 30.00 | — | — | ||
| "Supply of Flush Mouting AC Metal Distribution Box with SP 20A, 10kA MCB, Type-C- 01 No. & 3 Pin Socket with plug top for Split AC. | — | — | — | 22,920 | |
| — | 30.00 | — | — | ||
| Fixing and commissioning of Flush Mouting AC Metal Distribution Box with SP 20A, 10kA MCB, Type-C- 01 No. & 3 Pin Socket with plug top for Split AC duly concealed in wall with all others accessories and proper wiring to complete job. | — | — | — | 2,292 | |
| — | 30.00 | — | — | ||
| Supply of starter for split AC for 1.5ton or 2ton of 20-25A capacity or as per site requirement. | — | — | — | 15,600 | |
| — | 30.00 | — | — | ||
| Fixing and commissioning of starter for split AC for 1.5ton or 2ton of 20-25A capacity or as per site requirement duly concealed in wall with all others accessories and proper wiring to complete job. | — | — | — | 1,560 | |
| — | 60.00 | — | — | ||
| Supply of 12W or higher wattage LED Lamp, rated voltage 220-240V, input frequency- 50Hz, Lamp efficiency 110 lm/Watt, LED chip efficiency 130lm/Watt, Colour temprature - 6500K (cool White), IP20 protection, CRI80, Power factor0.9. | — | — | — | 7,197 | |
| — | 60.00 | — | — | ||
| "Installation of 12W or higher wattage LED Lamp, rated voltage 220-240V, input frequency- 50Hz, Lamp efficiency 110 lm/Watt, LED chip efficiency 130lm/Watt, Colour temprature - 6500K (cool White), IP20 protection, CRI80, Power factor0.9 | — | — | — | 720 | |
| — | 50.00 | — | — | ||
| "Supply of 20W or higher wattage LED tube light with Batten ( integrated electronic driver).As per CEGE approved Specification for LED tube light-high power, 2100 Lumen output,220V, 50Hz AC with constant current driver with short circuit and overload protection etc. | — | — | — | 19,950 | |
| — | 50.00 | — | — | ||
| Fixing and Commisioning of 20W or higher wattage LED tube light with Batten | — | — | — | 2,826 | |
| — | 12.00 | — | — | ||
| Supply of Starecase Downlight round shape 9 watt, 6500 kelvin, Rest all features of Light should be as per HQ specification. | — | — | — | 26,400 | |
| — | 12.00 | — | — | ||
| Fixing and Commisioning of any kind of Downlight round shape 9 watt, 6500 kelvin, Rest all features of Light should be as per HQ specification. | — | — | — | 1,320 | |
| — | 30.00 | — | — | ||
| "Supply of Brushless DC (BLDC) Motor Ceiling Fan, ISI marked, Sweep size: 1200 mm, Minimum Air delivery-210 Cubic Meter/Min, total harmonic distortion- 8% [max], Rated Voltage: 230 V, 50Hz, Single phase AC, Winding Material- Copper having purity of minimum 99.90 %, Class of Insulation- Class B or higher , Blade thickness (Min): 1.1mm, Blade material : Aluminium, Bearing : Double ball bearings, Down rod size (without shackle) : 300mm, Shank & Shackle thickness (Min) : 2mm, canopy : 2 nos., colour standard: white, BEE rating : 5 star (as per Ministry of Power Notification Number: S.O. 2210 (E) and S.O. 2211 (E) dated. 12th May 2022 or latest), Rated power- 28 watt [max], Warranty [Min] 24 Months. Conforming to- (i) IS:374/2019 with Amendment No. 1/2022 or latest (ii)IS:302 (Part 2/Sec 80) - For safety requirement (iii)IS:14700 (Part 3/Sec2) for THD (iv) IS 191:2007 with amendment no. 2 or latest for Copper purity . Speed control with electronic regulator (step type with minimum 5 running positions) and Regulators shall be provided with radio and television interference suppressing devices as per clause 10.7 of Amendment No. 1/2022 to IS 374/2019 or latest.Cost includes Suitable size of Stainless steel fastener,screw,nuts, bolts ,washer,Down rod etc as per site requirenment.Firm has to supply 5% of Additional Identical PCBs (as used in Ceiling Fans) along with the Ceiling Fans for post warranty repairs. Packing of PCBs should be free from moisture and damages.Special instruction: (i) The Firm shall submit Type test report along with Offer for the offered model & make of the BLDC fan with Electronic Regulator step type with minimum 5 running positions. Test report shall be from the NABL accredited Test lab. (ii) Routine test Certificates has to be submitted along with supply of materials. (iii) Acceptance test shall be carried out by Inspection Agency as per IS 374/2019 with Amendment No. 1/2022 or latest. (iv)The Firm shall submit Test report along with Offer for the purity of the copper used in the winding of the Offered model & make fan. Test report shall be from the NABL accredited Test lab., | — | — | — | 97,140 | |
| — | 30.00 | — | — | ||
| Fixing and commissioning of Brushless DC (BLDC) Motor Ceiling Fan, ISI marked, Sweep size: 1200 mm, with electronic regulator. Cost includes Suitable size of Stainless steel fastener,clamp, hook, screw,nuts, bolts ,washer,Down rod etc as per site requirenment and connection with flexible twin twisted multistrand Copper wire of 0.75 Sq.mm with flexible pipe and removing of the existing old fan (if any) and handing over of the same to Railway Store with clear acknowledgement, as per site requirement. | — | — | — | 3,257.1 | |
| — | 30.00 | — | — | ||
| "Supply of 125 mm inline duct booster exhaust ventilation fan suitable for 230V, 50Hz, AC supply, Conformity to Indian Standrad IS: 2312 (latest).accessories such as Frame, Legs Set,Rubber Clamps & Other Hardware - inclusive in the scope of supply. | — | — | — | 89,370 | |
| — | 30.00 | — | — | ||
| Fixing and commissioning of Exhaust Fans as per consignee requirement. | — | — | — | 4,353 | |
| — | 10.00 | — | — | ||
| Supply of Calling Bell. | — | — | — | 2,200 | |
| — | 10.00 | — | — | ||
| Fixing and commissioning of Calling Bell with necessary all accessories to complete the job. | — | — | — | 153.1 | |
| — | 10.00 | — | — | ||
| "Supply of Wall Mounted Meter Box Combination made of Powder Coated CRCA Sheet Steel of thickness (minimum): 1.6mm with Ingress Protection of IP 53 or higher, divided into 06 nos. compartments with Anti-Theft arrangement consisting with- (1) FP 100A, 36kA Microprocessor Based MCCB- 01 no. as main incoming, (2) 10-60A Digital Single Phase Two Wire AC Static watt-hour meter- 01 no. in each compartment (Total- 06 nos.), (3) DP 63A, 10kA MCB with 2PP, Type-C -01 no. in each compartment (Total- 06 nos.), MCB shall be placed in such way it can be operated with out opening door, with suitable Cu. Bus Bar, appropriate spreader link for MCCB, lock -key system with proper wiring to complete the job and with necessary item for seal the cable entry and outgoing point. Cost includes Suitable size of Stainless steel fastener, screw, nuts, bolts, washer etc as per site requirenment. | — | — | — | 7,88,436.2 | |
| — | 10.00 | — | — | ||
| Fixing and commissioning of Wall Mounted Meter Box Combination made of Powder Coated CRCA Sheet Steel of thickness (minimum): 1.6mm with Ingress Protection of IP 53 or higher, divided into 06 nos. compartments with Anti-Theft arrangement consisting with- (1) FP 100A, 36kA Microprocessor Based MCCB- 01 no. as main incoming, (2) 10-60A Digital Single Phase Two Wire AC Static watt-hour meter- 01 no. in each compartment (Total- 06 nos.), (3) DP 63A, 10kA MCB with 2PP, Type-C -01 no. in each compartment (Total- 06 nos.) with suitable Cu. Bus Bar, appropriate spreader link for MCCB, lock -key system with proper wiring to complete the job and with necessary item for seal the cable entry and outgoing point with all other Civil work and accessories to complete job including Suitable size of Stainless steel fastener, screw, nuts, bolts, washer etc as per site requirenment. | — | — | — | 29,779.3 | |
| — | 1000.00 | — | — | ||
| Laying of cable/ cables in under ground along the road through cable trench etc . as per standard drawing including necessary termination , connection and testing.Trenching and laying of U/G cables in any kind of soil trench of size minimum 0.40 mtr wide and 1 mtr deep covered with necessary bricks for protection of the cables including filling of space between brick and cable/cables with sand and refilling the trench with excavated soil, leveling up, and restoring the surface duly rammed. | — | — | — | 1,48,430 | |
| — | 200.00 | — | — | ||
| Laying of cable/ cables across the road, track, drain etc through RCC/GI pipe confirming to IS standard of size 100mm or 150mm (or any suitable size as per field requirement based on the actual size of the cable) as per relevant specification and as per standard drawing with necessary termination, connections and testing .Cost also includes collection of cable/cables from Railway store if required.GI pipe will be supplied by contractor. | — | — | — | 67,954 | |
| — | 200.00 | — | — | ||
| Laying of cable/ cables on wall / structure through PVC casing pipe of size 4inches or 3inches with accessories or as per site requirement with suitable clamp / saddle/ fixtures etc with necessary termination, connection and testing as per standard drawing.Cost also includes collection of cable/cables from Railway store if required. | — | — | — | 20,414 | |
| — | 100.00 | — | — | ||
| Laying of extra cables in the excavated same trench. | — | — | — | 1,729 | |
| — | 4.00 | — | — | ||
| Transportation of cables in rolls with or without wooden drums from the store of concerned SSEE or ELECTRICAL store of Santragachi to the site of works. | — | — | — | 4,048.32 | |
| — | 10.00 | — | — | ||
| Supply, transportation and fixing of RCC Cable Route Marker size L-12",B-6" and H- 2.6" with all accessories. | — | — | — | 5,123.9 | |
| — | 4.00 | — | — | ||
| Supply, fitment, testing and commissioning of heat shrinkable, straight through LT XLPE cable jointing kit complete with all accessories suitable for 4 core 240-400 sq.mm LT XLPE aluminum conductor armoured cable. | — | — | — | 14,846.8 | |
| — | 6.00 | — | — | ||
| Supply, erection, testing and commissioning of LT XLPE cable gland made of stainless steel with aluminium lugs/sockets (4 Nos.) suitable for termination work of LT 4 Core X 16-25 sq. mm XLPE aluminum conductor armoured cable. | — | — | — | 1,500 | |
| — | 6.00 | — | — | ||
| Supply, erection, testing and commissioning of LT XLPE cable gland made of stainless steel with aluminium lugs/sockets (4 Nos.) suitable for termination work of LT 4 Core X 35-50 sq. mm XLPE aluminum conductor armoured cable. | — | — | — | 1,920 | |
| — | 6.00 | — | — | ||
| Supply, erection, testing and commissioning of LT XLPE cable gland made of stainless steel with aluminium lugs/sockets (4 Nos.) suitable for termination work of LT 4 Core X 185-300 sq. mm XLPE aluminum conductor armoured cable. | — | — | — | 3,900 | |
| — | 200.00 | — | — | ||
| "Supply of 110mm dia HDPE pipe of Grade PE-100 or as per site requirement conforming IS 4984: Latest. | — | — | — | 2,26,500 | |
| — | 200.00 | — | — | ||
| Erection and commissioning of HDPE pipe of Any size with all accessories to complete job. | — | — | — | 8,150 | |
| — | 20.00 | — | — | ||
| Supply of Hot dipped Galvanized CABLOFIL wire mesh cable trays size: 54mm/200mm with coupling kit and other accessories. It shall be manufactured with a longitudinal 'T- welded' safety edge All Accessories including couplers , mounting accessories (Mechanically tested & supplied by cable tray manufacturer must be used) are required of same finish as per site requirement. Trays should comply Standard EN ISO 14 61: at least 550 h of SST. The deflection of cable tray must be no more than 1/200th of the distance between two supports and tested in accordance with the standard IEC 61537. Wire-mesh cable trays must be designed with an optimum span of 1.5 m, considering the maximum carrying capacity authorized by the manufacturer. Assemblies with specific fire resistant properties must have an E30-E90 certificate. Rod-dia must be from 3.9mm to5.9mm for different sizes. | — | — | — | 30,208 | |
| — | 20.00 | — | — | ||
| Fixing and commissioning of Hot dipped Galvanized CABLOFIL wire mesh cable trays size: 54mm/200mm with coupling kit and other accessories. | — | — | — | 1,135.6 | |
| — | 10.00 | — | — | ||
| Supply of Cable Junction Boxes of size (Box Dimensions LXBXH in mm) 450x375x200 mm or as per site requirement, IP 65 with metric knockouts for cable entry with 3-Phase in- coming and out going connection consists of 3-Phase and neutral terminal as per relevant ISS, with suitable bridge arrange- ment with all necessary accessories. | — | — | — | 27,730 | |
| — | 10.00 | — | — | ||
| Fixing and commissioning of Cable junction box ( of fibre body) for 3-Phase in- coming and out going connection consists of 3-Phase and neutral terminal as per relevant ISS, with suitable bridge arrange- ment of size : 450mm X 375mm x 200 mm or as per site requirement.,as per relevent specification/drawing. Fixing shall be made with necessary arrangements as per site requirement, cables are to be terminated with proper socketing arrangement to complete job. | — | — | — | 686.5 | |
| — | 2.00 | — | — | ||
| "Supply of 200A Copper Busbar Chamber Box made of Polycarbonate/ Thermoplastic of size: 600 X 600 X 210 mm or above including 4 Nos. Cu Busbar of size- 25X5mm or above as approved by competent authority, 5 sets of brass cable glands suitable for 50-120 sq.mm Alm Armoured cable. The Box should have Ingress Protection of IP65 or better, Impact Protection of IK09 or better, with rust, dust, moisture and shock proof, anti corrosive, fire returdant properties. | — | — | — | 49,449.08 | |
| — | 2.00 | — | — | ||
| Fixing & Commissioning of 200A Copper Busbar Chamber Box made of Polycarbonate/ Thermoplastic with 5 sets of brass cable glands suitable for 50-120 sq.mm Alm Armoured cable. Cost also includes fixing of the box in wall or electric pole with suitable fixing arrangement and proper termination and connection of cables to complete the job. | — | — | — | 4,944.9 | |
| — | 320.00 | — | — | ||
| Supply, Fabrication and erection of MS angle of 50 X 50 X 5 mm of suitable length with concrete foundation for fixing of junction box or busbar chamber in open space. | — | — | — | 24,000 | |
| — | 6.00 | — | — | ||
| Supply of 4M HDG(Hot Dip Galvanized) Octagonal Pole with double arm brackets and 02 quantity LED street light 45watt, IP67 and IK 07 with isi mark, top dia 70mm,bottom dia 130mm,sheet thickness 3mm,base plate dimensions(L X B X T)-200x200x12mmwith foundation bolts and single arm 1000mm long special brackets. The door opening of the pole should be reinforced, water proofed & with locking arrangement & arrangement of in build junction box with DP MCBs 16 A-1 No , to be placed on a din channel of Pole and supply and fixing of Terminal connector, connection of terminals with lugs, earthing at the suitable location of the pole. | — | — | — | 66,603.24 | |
| — | 6.00 | — | — | ||
| Erection, Fixing and Commisioning of 4M HDG(Hot Dip Galvanized) Octagonal Pole ,top dia 70mm,bottom dia 130mm,sheet thickness 3mm,base plate dimensions(L X B X T)- 200mmX200mm X12mm or higher with foundation bolts and single/double arm, 1000mm long special brackets, junction box and with concretting the foundation / plith including sand, ballast, cement & metalic tuisted rod etc.of size 750mmx750mm at bottom and 500mmX500mm at top or as per site rquirement with height 1500mm in the ratio 1:3:6 ( the rate shall be inclusive of all materials ) with necessary cable arrangement for lighting fixture with double arm brackets including fixture of lights &transportation of pole to site location. | — | — | — | 28,316.94 | |
| — | 6.00 | — | — | ||
| "Supply of sensor based street light LED 45 watt or higher wattage street light as per Specification No. CEE/S/185/ LED/12/21/Rev-0,2021 dated 22/12/2021 | — | — | — | 42,000 | |
| — | 6.00 | — | — | ||
| Fixing and commissioning of LED 45 watt or higher wattage street light including wiring of light from loop box with proper termination by Pin Type Terminal End Lugs including fixing to the arm by mean of stainless steel screws and stainless steel fastener as per site requirenment, to complete the job. | — | — | — | 1,379.52 | |
| — | 2.00 | — | — | ||
| "Supply,of Feeder Pillar panel made of Polycarbonate made (shock proof, rust free, corrosion free, acid and chemical resistant, fire retardant, having high impact, made of halogen and silica free recyclable material), UVresistant, having high grade gasket made of Polyurethane, should withstand glow wire test at 9600c, should be flame retardant, for avoiding condensation or formation of water droplets inside the feeder pillar. For that moisture absorbent material made of synthetic rubber, super absorbent polymer and nonwoven fabric which should have absorbency of 0.8g (H2O)/1g (product) @ 25deg C and 95% RH or Higher.the feeder pillar panel should hold Type Test certificate(CPRI)with switchgear assemblies as per IEC61 439-1.Mounting Type : Floor MountingCable Entry : Bottom, System Voltage 415V, 50Hz, 4Wire+E Busbar Rating200A (RYBN- 25X10)mm Cu. Incoming 200A FP 25KA MCCB- 1No, Outgoing 100A FP 25KA MCCB- 2Nos, 63A FP 25KA MCCB- 2Nos, 63A FP 10KA MCB- 1No,63/75A FP Contactor- 1No, 24Hrs Analog Timer- 1No,32A DP 10KA MCB- 4Nos, Start Push Button With 1NO(Green)- No Stop Push Button With 1NC(Red)- 1NoON LED Indication Lamp(Red)- 1NoOFF LED Indication Lamp(Green)- 1NoControl Fuse With Base- 1No | — | — | — | 6,99,150 | |
| — | 2.00 | — | — | ||
| "Erection, Commissioning & installation of Feeder Pillar panel with all electrical, civil and masanary works . | — | — | — | 34,957.5 | |
| — | 10.00 | — | — | ||
| "Supply of SPN 16-way DB (Double Door) consisting with DP 63A, 10kA MCB with 2PP, Type C- 01 no. & DP 63A, 30mA RCCB, Type AC- 01 no. as incoming and SP 20A, 10kA MCB, Type C- 08 nos, SP 10A, 10kA MCB, Type B- 02 nos, SP 6A, 10kA MCB, Type B- 02 nos as outgoing with Cu.bus-bar, Neutral links, Spreader Link and Earth bar etc. Thickness of DB material (in mm): 1.6 mm (CRCA Sheet Steel). Cost includes all other accessories including stainless steel fastener, Pin Type Terminal End Lugs to complete job as per specification attached. | — | — | — | 1,24,571.9 | |
| — | 10.00 | — | — | ||
| Fixing and Commisioning of SPN 16-way DB (Double Door) consisting with DP 63A, 10kA MCB with 2PP, Type C- 01 no. & DP 63A, 30mA RCCB, Type AC- 01 no. as incoming and SP 20A, 10kA MCB, Type C- 08 nos, SP 10A, 10kA MCB, Type B- 02 nos, SP 6A, 10kA MCB, Type B- 02 nos as outgoing with Cu.bus-bar, Neutral links, Spreader Link and Earth bar etc. and all other accessories including stainless steel fastener, Pin Type Terminal End Lugs as per specification attached with complete wiring to complete job. | — | — | — | 5,752.9 | |
| — | 2.00 | — | — | ||
| "Supply of 20HP Three Phase Energy Efficient Submersible pump & motor, Motor Capacity: 15KW, 3Ph, 415V AC, Suitable for Bore Size 200mm, Delivery Size 63-100mm or as per requirement of consignee, Head- 54Mtr or as per requirement of consignee, Discharge capacity (LPS)- 15 or above, Speed:- 2880RPM or above, Submersible Pump set\ conforming to IS:8034:2018 with latest Amendment, Motor Conforming to IS:9283 or latest with 3mtrs flat cable, suitable size of pump guard, non-returning valve, reducer and other material required for successfull installation of submersible pump. | — | — | — | 1,79,960 | |
| — | 2.00 | — | — | ||
| "Supply of 20 HP fully automatic Star-Delta Starter Control Panel for 3-Phase Submersible Pump in CRCA Sheet-Steel Enclosure of thickness (minimum): 1.6mm with necessary contactors, incoming MCB, Over Current Relay, Single phase preventer, in-built auto Star-Delta Timer, Voltmeter & Ammeter with rotary selector switch for 3 Ph, including Digital Timeswitch for auto operation as relevant per IS standard. | — | — | — | 56,500 | |
| — | 250.00 | — | — | ||
| "Supply of Submersible flat cable of size 3 Core x 10.00 Sq.mm PVC Insulated & PVC Sheathed Copper Conductor 1100V FR Grade ISI marked, conforming to IS:694 or latest. | — | — | — | 1,15,950 | |
| — | 20.00 | — | — | ||
| Supply of 3'' Dia UPVC Submersible Column Pipe (approximate Inner Dia- 80mm & Outer Dia 90mm) or as per site and size requirement for the above mentioned Submersible Pump with suitable couplers, Length: 3Mtr per pipe, Pressure Bearing Capacity: 10 Kgf/Sq.cm or above as relevant per IS standard. | — | — | — | 35,000 | |
| — | 2.00 | — | — | ||
| Supply of hand operated Water Valve or Intek Valve made of Stainless Steel Grade 316 of size 3" or as per site and size requirement, Conforming to Indian Standard IS 9890 or latest. Make-IS standard Indian make. | — | — | — | 4,998 | |
| — | 250.00 | — | — | ||
| Supply of Nylon rope 25 mm dia or as per site and size requirement for the Submersible Pump Conforming To Indian Standard IS 4572: 2014 (Latest). | — | — | — | 28,870 | |
| — | 2.00 | — | — | ||
| "Supply of ABS Reducer/Pvc Pipe Reducer/Flexible Connector/Plastic Pipe Reducer / (3""-2.5"") or as per site requirement. | — | — | — | 1,200 | |
| — | — | — | Reducer/Pipe | ||
| — | 1.00 | — | — | ||
| Supply of (GI) Top Adapter as per latest IS specification. | — | — | — | 1,888 | |
| — | 1.00 | — | — | ||
| Supply of (GI) Bottom Adapter as per latest IS specification. | — | — | — | 1,888 | |
| — | 1.00 | — | — | ||
| Supply of 3 pair clamp 1set=3nos.Conforming To Indian Standard. | — | — | — | 967.6 | |
| — | — | — | clamp | ||
| — | — | — | etc), | ||
| — | 1.00 | — | — | ||
| Lowering, complete installation and commissioning of submersible pump with all accessories as per consignee requirement to complete the job. | — | — | — | 9,904.28 | |
| — | 250.00 | — | — | ||
| Supply, laying, fixing and commissioning of 25x5mm GI strip as and where required extra for earth connection, at 0.5 Mtr below ground between earth electrode and main switch/ DB/ Electric pole etc. as per site supervisor's instruction, including connection & terminating with stainless steel nut, bolt, spring, washer etc, as required. (joining shall be done by overlapping and with 2 sets of stainless steel nut bolt & spring kit complete as per IS, IE rules and site requirement. | — | — | — | 29,520 | |
| — | 20.00 | — | — | ||
| "Supply of Earthing arrangement with supply of Hot Dip Galvanized (HDG) earth cone and all other requisite materials as per CEE/GRC's Drg. No.CEE/G/A3/P-150, Alt.1 including sump box with salt and charcoal, metalic cover etc. as per site supervisor's instruction. Cost includes supply of all materials mentioned in the Drawing including 02 mtrs 25x5mm GI strip for connection from earth electrod pipe to light pole /Rail pole etc. | — | — | — | 86,733 | |
| — | 20.00 | — | — | ||
| Erection of Earthing arrangement with erection of Hot Dip Galvanized (HDG) earth cone and all other requisite materials as per CEE/GRC's Drg. No.CEE/G/A3/P-150, Alt.1 including sump box with salt and charcoal, metalic cover etc. as per site supervisor's instruction. Cost includes erection of all materials mentioned in the Drawing including 02 mtrs 25x5mm GI strip for connection from earth electrod pipe to light pole /Rail pole etc. | — | — | — | 20,924.2 | |
| — | 10.00 | — | — | ||
| Supply and installation of Geyser 25 litre with all required accessoriesConformity to Indian Standard IS:2082(latest), Wall Mounting Vertical,BEE Star Rating 5,Material of Inner Container Stainless Steel,Material of Outer Container CRCA. | — | — | — | 90,000 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC 2022
ATTACHMENT
GCC-2022Correctionslip1.pdf
ATTACHMENT
AdvanceCorrectionSlipNo.2.pdf
ATTACHMENT
GENERALCONDITIONSOFTENDER.pdf
ATTACHMENT
1.0-explantorynoteQuarter.pdf
ATTACHMENT
JPOforconcealedwiring.pdf
ATTACHMENT
JPOfordiggnigwork.pdf
ATTACHMENT
LEDSpecificationScan_compressed.pdf LED Specification
ATTACHMENT
Specification.pdf
ATTACHMENT
GCC_April-2022_2022_CE-I_CT_GCC-2022_POLICY_27_04_22.pdf
ATTACHMENT
LEDSpecificationScan_compressed.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .