PROVISION OF OTM ACCN FOR 1 X MED REGT (PH-II) AT BAGRAKOTE MIL STN (OFFICERS COMPLEX)

Amount

BUILDING AND STRUCTURE (Sch 'A' PART-I)

Lump sum price worked out by the Contractor for “BUILDING AND STRUCTURE” as listed in Schedule ‘A’ Part-I. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 42457900.00 inserted by the MES in Schedule ‘A’ Part-I.

DEMOLITION B & R (Sch 'A' Part II)

Lump sum price worked out by the Contractor for “(DEMOLITION B & R)” as listed in Schedule ‘A’ Part-II. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs 25900.00 inserted by the MES in Schedule ‘A’ Part-II.

DEMOLITION E & M (Sch 'A' PART-III)

Lump sum price worked out by the Contractor for “DEMOLITION E & M” as listed in Schedule ‘A’ Part-III. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 20900.00 inserted by the MES in Schedule ‘A’ Part-III.

DEMOLITION E & M (MISC)

Dismantling and taking down u/s main switches ,DB etc complete all as specified and directed.

Dismantling earthing any type complete all as specified and directed.

Taking out of old U/S GI pipe 100/80mm dia from trench etc any removing from site all as directed

Taking out of old U/S GI pipe 40/50mm dia from trench etc any removing from site all as directed

Taking out of old U/S GI pipe 25 mm dia from trench etc any removing from site all as directed

Dismantling U/S sluice valve/air release valve any tye any size complete all as specified and as directed

Dismantling U/S valve pit any type any size complete all as specified and directed

Dismantling U/S gate /globe valve any tye any size complete all as specified and as direcetd.

Dismantling U/S STREET LIGHT BRACKET and fitting complete all as specified and as direcetd.

Dismantling u/s service wire complete all as specified and as direcetd.

Water Cooler/cooling appliances (Sch 'A' Part-IV)

Lump sum price worked out by the Contractor for “(Water Cooler/cooling appliances)” as listed in Schedule ‘A’ Part-IV. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs 3000.00 inserted by the MES in Schedule ‘A’ Part-IV.

Water Cooler/cooling appliances (MISC)

Supply, installation, testing & commissioning water cooler storage type, ISI maeked, Electric driven,single phase, 230volts, 50 Hz with all internal accessories, stainless steel body & tank, power saving PUF installation, adjustable cold water thermostate 10 degree to 25 degree centigrade, auto cut off favility, over load protection, stainless steel front panel, extended plastics legs, eco friendly conforming to relevant IS & pf shall not be less than 0.85, compressor & approx storage capacity of 40 ltrs and nominal cooling capacity of 40 ltrs per hour above 3 star rating incl electric connection complete all as specified and directed

S&F voltage stabilizer of automatic operation, single phase naturally air cooled indoor type & designed for input variation between 100 volts to 290 volts with output volatge stabilized at 230 volts with accuracy of plus/minus 2.5% and of capacity 2 KVA complete all as specified and directed

Air conditioning and Refrigeration (MISC)

Supply, installation, commissioning and testing of refrigerator double door, toughened glass shelves, BEE 3 star rating frost free defrosting refrigerator, eletcric driven, single phase, 230 volts, 50 Hz of capacity 260 ltrs or nearest higher standard size complete all as specified and directed.

Supply and fix voltage stablizer for automatic operation, single phase naturally air cooled indoor type and designed for inpur variation between 170 volts to 250 volts with out put voltage stablized at 230 volts with accuracy of + 2.5% and capacity 2 KVA complete all as specified and directed

Hot water System (Sch 'A' Part-V)

Lump sum price worked out by the Contractor for “(Hot water System )” as listed in Schedule ‘A’ Part-VI Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs 26700.00 inserted by the MES in Schedule ‘A’ Part-VI.

Hot water System (MISC)

Supply and fix Water heater storage type, electric,capacity 25 litres.BEE 5 star rated including hot/cold connecting pipe all as directed.

Road, Path & Culvert (Sch 'A' PART-VI)

Lump sum price worked out by the Contractor for “Road, Path & Culvert” as listed in Schedule ‘A’ Part-VII. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 1583100.00 inserted by the MES in Schedule ‘A’ Part-VII.

Road, Path & Culvert (MISC)

applying evenly a priming/tack coat with cationic bitumen (RS-1) @ 3.5 Kg/10 Sqm all as directed.

M&L premix bituminous macadam 50mm (consolidated thickness) with 4% binder content using CRMB 55 (Crumb Rubber Modified Bitumen) by weight of total mix, laid, rolled and compacted with 8 to 12 tonne power roller to gradient and camber required to gradient and camber etc. all as specified and directed. .

M&L applying evenly a priming/tack coat with cationic bitumen (RS-1) @ 2.5 Kg/10 Sqm etc. all as specified and directed.

M&L Bituminous premix asphaltic semi dense concrete 40 mm consolidated thickness with 5.5% binder content paving bitumen by weight of total mix. The binder shall be CRMB 55 (Crumb Rubber Modified Bitumen), rolled and compacted with 8 to 12 tonne power roller to required camber and gradient complete. all as directed

M&L reflective thermoplastic white/yellow road marking paint conforming to BIS 3262 laid down through road marking machine in layer of crystlex and use of 5 kg per sqm by incorparating the white glass beads for reflecting in 100mm width all as directed. Make : Asian Paints / Shalimar Paints / Berger

Supply and installation of Raised pavement marker (RPM) with polycarbonate lens electronically welded with the RPM body. The marker shall be scartch proof and abrasion resistant mircroprismatic polycarbonate lens with polycarbonate reflective panels with dual prismatic cubes capable of providing total internal reflection. Dimension: The dimensions of the marker is height ; 15.88, width; 101.6, lenght; 89.20mm. The marker conforms to ASTM D4280 & is in accordance with MOSRTH circular referance no. RW/NH 33023/10/97-DO III, dated 11th June 1997. Marker shall be fixed with adhesive and no nails shall be used to affix the marker and shall be marked with manufacturer name. Make : 3M / DARK EYE

EXTERNAL WATER SUPPLY (Sch 'A' PART-VII)

Lump sum price worked out by the Contractor for “EXTERNAL WATER SUPPLY ” as listed in Schedule ‘A’ Part-VIII. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 164600.00 inserted by the MES in Schedule ‘A’ Part-VIII.

EXTERNAL WATER SUPPLY (MISC)

Supply, installed , testing and commsiioning centrifugal pump set of capacity 12.5 HP alongwith suitable size of star delta starter and with bronze impeller , and directly coupled with motor suitable for head not less than 34 mtr, and discharge min 961 LPM along with base frame operated on AC 3 phase voltage complete all specifed and directed .(The motor and pump should comply to all the requirement of relevant IS)

Supply and lay pipe ductile Iron both end socketed , Class “K-7” ,ISI marked150 mm including rubber gasket , grease complete including connected acessories all as directed all as specided and directed .

Supply and lay pipe ductile Iron both end socketed , Class “K-9” ,ISI marked 100 mm including rubber gasket , grease complete including connected acessories all as directed all as specided and directed .

M&L for construction of brick masonary valves pits, of the internal dimension 900mm x 900 mm x 900 mm complete and fabrication of 3.15 mm thick MS Sheet cover and angle iron frame made out of 40mm x 40mm x 6 mm MS angle and one side provided with hinged with locking arrangement duly painted including necessary earth work and PCC work complete all as specified and as directed

All as per item No 13.04 here-in-before but dimension 600mmm x 600mm x 600mm -ditto- as above.

Drilling and Tapping DI water mains (in Position) for branch connections of the internal Dia complete all as specified and directed

M&L for fittings (ISI marked) of size 150/100 mm for DI pipes class K-9/K-7 with inside cement mortar lining and black bitumen external coating, such as bends (any type radious and angle), tapers , tee piece, single branches, Y Junctions, double Junctions, connecting pipes nut bolts , gasket , flanges, including push on rubber etc complete all as specified and as directed.

EXTERNAL ELECTRIC SUPPLY (Sch 'A' Part-VIII)

Lump sum price worked out by the Contractor for “(EXTERNAL ELECTRIC SUPPLY)” as listed in Schedule ‘A’ Part-IX Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs 2453800.00 inserted by the MES in Schedule ‘A’ Part-IX.

EXTERNAL ELECTRIC SUPPLY (Misc)

Supply, install, testing & commissioning of approved factory made outdoor cubical type stainless steel (SS304) enclosure compartmentalized exterior and interior mirrorsuitable for highly corrosive environment, high creep resistance better mechanical property like ductility, yield strength, hardness etc for 3 phase 4 wire 415 V, 50 Hz incl U shaped neoprene gasket to avoid water ingress.The enclosure should be made of 2mm thick SS 304.The partition shall be 1.6mm SS304. The fixing of double door shall be on SS hinges with anti- theft provision (the door can not be removed from enclosure with out cutting enclosure) with sliding and locking arrangement front and rear both side and mounted on channel 75mm welded panel of SS304 with 04 Nos foundation bolt of size not less than 20mm dia and 300mm long. The enclosure shall have provision of copper alloy. the enclosure shall be completed incl internal wiring using suitable size of copper conductor cables and coloured coded aluminium strips for incoming and outgoing connections of all switches/MCBs/MCCB/ Bus Bar cable clearance between phase to phase shall not be less tahn 32 mm phase to body 50mm phase to neutral 32mm bus bar. bus bar shall be insulated with colour code/heat shrinkable sleeve including necessary PCC (1:3:6) type C2 for foundation/ platform all as specified and directed. Enclosure shall be complile in all respects with and incl the following accessories (Offrs Mess) BUSBAR :- 200 Amps rated Aluminium bus bar 04 Nos duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite/DMC insulator bus bar support (Square/round ) insulators of suitable size and good insulation resistance. INCOMING:- (i) MCCB 4P of capacity 100 Amps, 415 Volts, 50 Hz, 3 phase breaking capacity 16 KA Electronic release type - 01 No (ii) 01 nos Multi-Function-Meter (Acc.Cl.0.5) shall be provided with LCD display for measuring current, voltage, power, power-factor and energy-parameters, Total Harmonic Distortion and Max. Demand Indication, same shall be communicable on ModBus via RS485 port.,Cl-1.0 - ELmeasure /Conzerv /Rishabh (iii) Modular indicator lamp with integral circuit (230/240 volt) and cluster LED (RED, ORANGE, BLUE) -01 set (iv) CT (400/5A) -03 Nos OUTGOING:- (b) MCCB 4 Pole of capacity 63 Amp , breaking capacity 16 KA - 3 Nos All MCCB with adjustable thermal and magnetic protection for over load and short circuit and conforming to IEC60947-II/IS 13947-II (Latest Version). The MCCB should have Ics=100%Icu. The MCCBs shall have spreader links and barriers as standard feature of manufacturer. All out going feeder shall be connected by cable through suitable size gland plate / glands. The various feeders shall be indicated by font size not less than 20 mm letters using Acrylic sheet. The minimums clearance of bus bar shall be 32mm phase –phase and 26mm for phase to earth. The bus bar shall have colour coding with insulating tape. The platform shall be such that it is of a height 45 cm above the nearest road level.

Supply, install, testing & commissioning of approved factory made outdoor cubical type stainless steel (SS304) enclosure compartmentalized exterior and interior mirrorsuitable for highly corrosive environment, high creep resistance better mechanical property like ductility, yield strength, hardness etc for 3 phase 4 wire 415 V, 50 Hz incl U shaped neoprene gasket to avoid water ingress.The enclosure should be made of 2mm thick SS 304.The partition shall be 1.6mm SS304. The fixing of double door shall be on SS hinges with anti- theft provision (the door can not be removed from enclosure with out cutting enclosure) with sliding and locking arrangement front and rear both side and mounted on channel 75mm welded panel of SS304 with 04 Nos foundation bolt of size not less than 20mm dia and 300mm long. The enclosure shall have provision of copper alloy. the enclosure shall be completed incl internal wiring using suitable size of copper conductor cables and coloured coded aluminium strips for incoming and outgoing connections of all switches/MCBs/MCCB/ Bus Bar cable clearance between phase to phase shall not be less tahn 32 mm phase to body 50mm phase to neutral 32mm bus bar. bus bar shall be insulated with colour code/heat shrinkable sleeve including necessary PCC (1:3:6) type C2 for foundation/ platform all as specified and directed. Enclosure shall be complile in all respects with and incl the following accessories:(Main panel for transformer ) BUSBAR :- 800 Amps rated Aluminium bus bar 04 Nos duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite/DMC insulator bus bar support (Square/round ) insulators of suitable size and good insulation resistance. INCOMING:- (i) MCCB 4P microprocesser based of capacity 400 Amps, 415 Volts, 50 Hz, 3 phase breaking capacity 50 KA Electronic release type - 01 No (ii) 01 nos Multi-Function-Meter (Acc.Cl.0.5) shall be provided with LCD display for measuring current, voltage, power, power-factor and energy-parameters, Total Harmonic Distortion and Max. Demand Indication, same shall be communicable on ModBus via RS485 port.,Cl-1.0 - ELmeasure /Conzerv /Rishabh (iii) Modular indicator lamp with integral circuit (230/240 volt) and cluster LED (RED, ORANGE, BLUE) -01 set (iv) CT (400/5A) -03 Nos OUTGOING:- (a) MCCB 4 Pole of capacity 100 Amp , breaking capacity 16 KA - 05 Nos (b) MCCB 4 Pole of of capacity 63 Amp , breaking capacity 16 KA - 4 Nos (c) 01 nos Seperate module for 5 KW ,three phase automatic Street Light timer switch for automatic switching on/off street light based on lux level of nature light, consisting of sensor overload protection fuse gear, power contactor & MCB/MCCB of suitable capacity complete all as specified and as directed by Engr- in- Charge Make: kakatiya energy system Pvt Ltd Cat No. Swadeep 66-02EC-5KW 3P or equivalent in Havells/GE (d) 01 nos On load modular change over switch 4P of 100Amps capacity having provision of inputs from panel busbar and Separate DG cable, outputs saperately to only 01 nos 100A MCCB mentioned above. (e) MCB DP of capacity 20 Amp 10KA - 06 nos, equally loaded in each phase. All MCCB with adjustable thermal and magnetic protection for over load and short circuit and conforming to IEC60947-II/IS 13947-II (Latest Version). The MCCB should have Ics=100%Icu. The MCCBs shall have spreader links and barriers as standard feature of manufacturer. All out going feeder shall be connected by cable through suitable size gland plate / glands. The various feeders shall be indicated by font size not less than 20 mm letters using Acrylic sheet. The minimums clearance of bus bar shall be 32mm phase –phase and 26mm for phase to earth. The bus bar shall have colour coding with insulating tape. The platform shall be such that it is of a height 45 cm above the nearest road level.

supply and fixing cable route indicator complete of size 30x30x3 cm with the letter '(HT cable)" suitably inscribed on CI circular plate 8 mm thick 100 mm dia . The cable route indicator sall be provided at ends, for loops ,at bends and at interval of 100 m in staight runs complete all as specifed and directed.

S&F danger notice plate of size 25x20 cm of 1.6 mm thick mild steel sheet , vitreous enameled white, with letters , figures and conventional skull and bones in signal red colour and fixed with MS clamps ,bolts and nuts of approved size for HT confirming to IS -2551 complete all as specifed and directed

Material and labour for spreading 40 mm graded stone aggregate in layers n.exc 15 cm thick around the 2 pole/ 4 pole / or as pointed structure, at different locations complete all as directed by Eng-in-charge.

M&L for boring under road for passing the cable/GI pipe under existing road up to 1 mtr depth as directed by Engr-in-Charge. Note: GI pipe will be measured and paid under relavent item.

S&F new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium street security light with high power LED as light source lamp type 72W with SPD, IP 66 protection along with fixing rod / pole brackets and connecting arrangements complete all as specified and as directed.

Supply and fixing thermoplastic polycarbonate cable junstion box having protection IP 66 "dust proof, acid resistant, shock proof, fire retardent self extinguisher" for outside installation with knockout entry for cable of size 10-16 sqmm and 155x210x92mm with terminals, brackets for street light pole mounting and provision of one 6A MCB SP all as specified and as directed of make Hensel DK1616G.

M&L for water proof, 3core PVC insulated and PVC sheathed, copper conductor cable of size 1.5 sqmm, 1100 Volts grade for electrical connection of street light fittings, complete all as specified and directed.

M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (in vertical position ) earth pit not less than 2.25 mtrs below normal ground level with the top edgeof the earth plate not less than 1.5 mtr (B.G.L.) & connected to galvanised iron wire 4 mm dia by means of bolts,nuts,checknuts & washer of galvanised iron including PCC (1:2:4) type B1 precast RCC cover slab with suitable handle made pf 6 mm round bar, including necessary excavation & earth work in any type of soil , 20 mm dia med grade galavinised steel tube for watering with one end fixed with cast iron funnel & wire mesh, 15 mm bore light grade galvanised steel tubing up to 7.5 mtr length for drawing earth lead GI strip proctection & common salt , charcoal in alternate layers etc. complete all as shown in EP no 3 of SSR Part 1 & testing on complection.

S&F earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire complete all as directed.

M&L for pin type polymer composite insulators, ball and socket type spindle suitable for working pressure 11 KV complete all as specified and as directed by Engr-in-charge.

SEWAGE DISPOSAL (Sch 'A' Part-IX)

Lump sum price worked out by the Contractor for “(SEWAGE DISPOSAL)” as listed in Schedule ‘A’ Part-X Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs 1301600.00 inserted by the MES in Schedule ‘A’ Part-X.

SEWAGE DISPOSAL (MISC)

M&L for 150mm nominal dia DCWPE (SN-8) Pipes laid in trenches and jointed including coupler, bend, tee and other accessories complete all as specified and as directed

Area Drainage (Sch 'A' Part-X)

Lump sum price worked out by the Contractor for “(Area Drainage)” as listed in Schedule ‘A’ Part-XI Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs 538700.00 inserted by the MES in Schedule ‘A’ Part-XI.

Security wall / Fencing / Gate (Sch 'A' Part-XI)

Lump sum price worked out by the Contractor for “(Security wall / Fencing / Gate)” as listed in Schedule ‘A’ Part-XII. Representing ** ___ % ______ percent *Above / Below the lump sum price of RS 2046300.00 inserted by the MES in Schedule ‘A’ Part-XII.

INTERNAL WATER SUPPLY (Sch 'A' PART-XII)

Lump sum price worked out by the Contractor for “INTERNAL WATER SUPPLY ” as listed in Schedule ‘A’ Part-XIII. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 322000.00 inserted by the MES in Schedule ‘A’ Part-XIII.

INTERNAL WATER SUPPLY (MISC)

S&F two way bib cock with wall flange chromium plated with crutch or butterfly handle screwed down screwed for iron pipe 15 mm bore and fixed complete all as specified and as directed. Make : Jaquar Code No. KUP-35041PM or equivalent in CERA/Marc

S&F 15mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed (3-in-1) Make : Jaquar Code No. FUS-CHR-29281 or equivalent of Marc/Cera

S&F 15mm bore CP Pillar Tap Mixer all as directed. Make : Jaquar Code No. FON-CHR-40023B or equivalent in Marc/Cera

INTERNAL ELECTRIC SUPPLY (Sch 'A' PART- XIII)

Lump sum price worked out by the Contractor for “INTERNAL ELECTRIC SUPPLY ” as listed in Schedule ‘A’ Part- . Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 2114600.00 inserted by the MES in Schedule ‘A’ Part-XIV.

INTERNAL ELECTRIC SUPPLY (MISC)

S & F modular TV socket 1 module in separate box and providing separate PVC conduit pipe complete of make: Legrand/Roma

S & F modular RJ 11 telephone socket 1 module in separate box and providing separate PVC conduit pipe complete of make: Legrand/Roma

S&F modular blanking plate 0.8mm 1 module all as specified and as directed by the Engineer in charge of make: Legrand/Roma

S&F modular power unit for 2 ton AC and 3.5KW load of 4 module all as specified and as directed by the Engineer in charge of make: Legrand/Roma

S&F modular white cover plate with frame 12 module inclusive of inner & outer plate complete all as specified and as directed by the Engineer in charge make: Legrand/Roma

S & F modular metal flush box 8 module all as directed make: Legrand/Roma

S & F modular metal flush box 12 module all as directed make: Legrand/Roma

M&L for laying concealed conduit medium grade 25mm dia suitable for drawing TV/Tele cable with all fittings & accessories all as directed.

S&F fancy wall light fitting having LED light source of 9W warm light 3000K with Al fixture with white powder coated body incl all necessery connecting arrangements as per site requirements all as specified and directed of make: Philips/Havells/crompton.

S&F fancy wall light fitting having LED light source of 9W cool light 6000K with Al fixture with white powder coated body incl all necessery connecting arrangements as per site requirements all as specified and directed of make: Philips/Havells/crompton.

S&F bed side light fitting having LED light source of 3W cool light 6000K with metallic body incl all necessery connecting arrangements as per site requirements all as specified and directed of make: Philips/Havells/crompton.

S&F nebula picture light fitting having LED light source of 12W warm light 3000K metallic siliver body incl all necessery connecting arrangements as per site requirements all as specified and directed of make: Philips/Havells/crompton.

S&F surface mounted round downlighter light fitting having 3W LED light source of warm light 3000K PDC housing incl all necessery connecting arrangements as per site requirements all as specified and directed of make: Philips/Havells/crompton.

S&F wall mounted mirror light fitting having 10W LED light 6K with dual diffuser and flexible head to direct light where required incl necessery connecting arrangements all as directed of make: Philips/Havells/crompton.

S&F surface mounted round LED downlighter light fitting having 12 Watt LED light source of warm light 3000K PDC housing aluminium body with surge protection of 2KV incl all necessery connecting arrangements as per site requirements all as specified and directed of make: Philips/Havells/crompton.

S&F LED strip light with driver of 5 meters length 24W output in warm light 3000K incl all necessery connecting arrangements as per site requirements all as specified and directed of make: Philips/Havells/crompton.

S&F surface mounted square shape fitting having LED light source 36W 6K with lumen of CRCA housing incl all necessery connecting arrangements as per site requirements all as specified and directed of make: Philips/Havells/crompton.

S&F surface mounted square shape fitting having 10W LED light source 6000K with lumen of 100lm per watt efficiency PDC housing incl all necessery connecting arrangements as per site requirements all as specified and directed of make: Philips/Havells/crompton.

S&F decorative box type surface mounted fitting with 9W LED 6K light source 2 feet light with Al extruded batten luminaire for 230 volt AC all as directed by EIC of make Philips/Havells/crompton.

S&F decorative box type surface mounted fitting with 18W LED 6K light source 4 feet light with Al extruded batten luminaire for 230 volt AC all as directed by EIC of make Philips/Havells/crompton.

S&F decorative box type surface mounted fitting with 18W LED 3K light source 4 feet light with Al extruded batten luminaire for 230 volt AC all as directed by EIC of make Philips/Havells/crompton.

S&F new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium building security light with high power LED as light source lamp type 25W with SPD, IP 66 protection with rod and connecting arrangements complete all as specified and as directed.

S&F heavy duty exhaust fan with louvers at outside, single phase, 230/240 V, of size 450 mm sweep metal body, 1400RPM and incl making holes on wall & making good the distrubed surfaces with all connecting arrangements complete of make usha or equivalent of Havells/Khaitan.

S&F energy efficient, 5 star rated noiseless ceiling fan without remote 230V 1200 mm sweep without remote and high torque BLDC motor with all accessories and connecting up with the ceiling rose with required flexible wire of suitable size including making provision for hanging fan on any type of ceiling complete all as specified and as directed. Make: Havells/Usha.

S&F heavy duty exhaust fan with louvers at outside, single phase, 230/240 V, of size 300 mm sweep metal body, 1400RPM and incl making holes on wall & making good the distrubed surfaces with all connecting arrangements complete of make usha or equivalent of Havells/Khaitan.

Supply and fixing decorative LED post top lantern fitting Havells endura spring 35 watt, IP 65 protection with pressure die cast powder coated housing and PC diffuser luminaire for 230 volt AC suitable for pole dia 76mm, including connecting wire from junction box and all fixing arrangements complete all as directed.

Supply & Fixing vertical TPN DB with sheet metal enclouser, 04 way IP-43 and IK-09 with rated 100A fully insulated copper bus bar & shrouded neutal bars, double door suitable for MCCB 160A as incommer and MCB SP/TP as outgoing with 2 neutralbar, 2 earthbar and cable tiles for cable managements, incl cutting chases for DB of reqd size and making good distrubed surface area complete all as specified and as directed of make Legrand 507725.

Supply & Fixing TPN DB with sheet metal enclouser, 04 way IP-43 and IK-09 with rated 100A fully insulated copper bus bar & shrouded neutal bars, double door suitable for MCB TPN as incommer and MCB SP/TP as outgoing with neutralbar, earthbar and cable tiles for cable managements, incl cutting chases for DB of reqd size and making good distrubed surface area complete all as specified and as directed of make Legrand 507670.

Supply & Fixing DB with sheet metal enclouser 240 volts, 12 way IP-43 and IK-09 with rated 100A Copper bus bar single pole & neutral double door for MCB, incl cutting chases for DB of reqd size and making good distrubed surface area complete all as specified and as directed of make Legrand 507612.

Supply & Fixing DB with sheet metal enclouser 240 volts, 4 way IP-43 and IK-09 with rated 100A Copper bus bar single pole & neutral double door for MCB, incl cutting chases for DB of reqd size and making good distrubed surface area complete all as specified and as directed of make Legrand 507611.

S&F MCB, SP, 10KA, 230V, "C" curve, 06-32 A, ISI Marked complete all as directed of make Legrand 408587 to 95.

S&F MCB, DP, 10KA, "C" curve, 06-32 A, ISI Marked complete all as directed of make Legrand 408628 to 36.

S&F MCB, TP, 10KA, 415V, "C" curve, 20 A, ISI Marked complete all as directed of make Legrand 408656

S&F MCB, TP, 10KA, 415V, "C" curve, 40 A, ISI Marked complete all as directed of make Legrand 408659

S&F MCB, TPN, 10KA, 415V, "C" curve, 40 A, ISI Marked complete all as directed of make Legrand 408659

S&F MCCB 4 pole 16KA breaking capacity 63A rated current, thermal adjustable 0.8 to 1ln, magnetic adjustable 5 to 10ln complete with spider links, ISI Marked complete all as directed of make Legrand 420013

Supply & Fixing plug and socket DB of rating 20A 3P+E, 415 volts, 3 module, incl cutting chases for DB of reqd size and making good distrubed surface area complete all as specified and as directed of make Legrand/Havells/L&T

Supply and fixing of Smart Three Phase Meter with the following specifications: AC Single Phase Two Wire, Tamper Proof, Static Meter of Class 1.0, 240 V, 50 Hz, 10 A-60 A conforming to IS-16444 and relevant IEC standards with inbuilt GPRS communication facility with default and on demand display, billing data generation facility, anti-tamper features, Microprocessor and LED/LCD based circuitry. Meter Should support the following data : 30 min instantaneous data for voltage, current, power factor, power, cumulative energy, cumulative apparent energy and frequency, 30 load survey data for energy, monthly billing survey for Cumulative Energy and Max Demand Meter should have connect / disconnect functionality operable from prepaid billing software. Implementation of cloud hosted head end and meter data management software (with prepaid feature) per meter along with Mobile app for Individual Consumer. Make: L&T – Electrical & Automation

Supply and fixing of Smart Single Phase Meter with the following specifications: AC Single Phase Two Wire, Tamper Proof, Static Meter of Class 1.0, 240 V, 50 Hz, 10 A-60 A conforming to IS-16444 and relevant IEC standards with inbuilt GPRS communication facility with default and on demand display, billing data generation facility, anti-tamper features, Microprocessor and LED/LCD based circuitry. Meter Should support the following data : 30 min instantaneous data for voltage, current, power factor, power, cumulative energy, cumulative apparent energy and frequency, 30 load survey data for energy, monthly billing survey for Cumulative Energy and Max Demand Meter should have connect / disconnect functionality operable from prepaid billing software. Implementation of cloud hosted head end and meter data management software (with prepaid feature) per meter along with Mobile app for Individual Consumer. Make: L&T – Electrical & Automation

S&F decorative LED bollard light fitting 10 watt, IP 65 protection with pressure die cast powder coated housing and PC diffuser luminaire 0.6 mtr for 230 volt AC, including white washed PCC base and necessery connecting wire from junction box complete all as directed Make: Havells UFOBLS10WLED830PSYMTOPC or equivalent model.

S&F surface mounted round LED downlighter light fitting having 6 Watt LED light source of warm light 3000K PDC housing aluminium body with surge protection of 2KV incl all necessery connecting arrangements as per site requirements all as specified and directed of make: Philips/Havells/crompton.

EARTH WORK AND EXCAVATION (Sch 'A' PART- XIV)

Lump sum price worked out by the Contractor for “EARTH WORK AND EXCAVATION ” as listed in Schedule ‘A’ Part- . Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 908600.00inserted by the MES in Schedule ‘A’ Part-XIV.

M/s BHAGWATI CONSTRUCTION

M/s KASHMIRA SINGH BARMI AND SONS

M.P. SITANI AND SONS

M/S R. K. INDUSTRIES