8962 ADDN ALTN T1 TO T9 AND T19 AND VIP SUIT AT HUT BAY

Amount

SCHEDULE 'A' : PART -I (B/R Portion) :- Demolition of Concrete of any description and in any position not otherwise provided for including sewage pipe etc and removing debries 50 mtrs away from starting point complete all as specified and directed by Engineer in charge.

Dismantling old asbestos sheet wall panelling, ceiling board of any size and thickness including cover fillets complete all as specified and directed by Engineer in charge..

Dismantling old Plain steel sheeting, any gauge, thickness, including Nainital or similar pattern as in valley or ridges complete all as specified and directed by Engineer in charge.

Taking down chowkats with shutters (without taking off shutters from frames) n. exc 1.5 sqm.

Taking down door chowkats or window frame with shutters (without taking off shutters from frames) exc 1.5 sqm but n exc 4 sqm Each.

Taking down shutters of any description not exceeding 1.0 Sqm each complete all as specified and directed by Engineer in charge..

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed by Engineer in charge..

Taking down rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

Material and labour for 25mm plain Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in levelling course complete all as specified and directed by Engineer in charge.

Material and labour for 75mm plain Cement concrete type C-2, 1:3:6 (40mm graded aggregate) including the top surface finished even and smooth without using extra cement as in plinth protection, with expansion joints at 1.2 Mtr interval and entire depth of joint to be filled with a mixture of bitumen and sand in a proportion of 1:3 complete all as specified.

Material and labour for Cement concrete in foundations, filling and mass concrete, Type C2 1:3:6 (40 mm graded aggregate) complete all as specified and directed by Engineer in charge.

Material and labour for Pre-cast cement concrete block masonry( Type C1 1:3:6 using 20mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar in 1:6, complete all as specified and directed by Engineer in charge.

Material and labour for precast cement concrete hollow block 10cm thick type C1 1:3:6 using 16mm graded aggregate set in cement mortar 1:4 complete all as specified and directed by Engineer in charge.

Material and labour for Pre-cast cement concrete block masonry( Type C1 1:3:6 using 20mm graded aggregate) with hollow blocks, exc. 10 cm in width and setting in cement mortar in 1:4, complete all as specified and directed by Engineer in charge.

Material and labour for 10mm thick rendering in CM 1:4 on fair faces of block work or concrete surfaces and to be finished even and smooth without using extra cement complete all as specified and directed by Engineer in charge.

M & L for rendering 15mm thick in CM 1:6 on fair faces of block work or concrete surfaces and to be finished even and smooth without using extra cement complete all as specified and directed by Engineer in Charge.

Material and labour for Vitrified Ceramic tiles dark shaded, 9-10 mm thick (square/ rectangular), polished, area of each tile not exceeding 0.36 sqm, in floors etc set & jointed in neat cement slurry & pointed in coloured cement to match the tile colour over 15 mm thick Screed bed or bedding layer of cement mortar in 1:6 complete all as specified and directed by Engineer in charge..

Material and labour for Vitrified Ceramic tiles dark shaded, 9-10 mm thick (square/ rectangular), polished,as in skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match the tile colour over 10 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 complete all as specified and directed by Engineer in charge..

Material and labour for Non - skid Coloured ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the tiles over 15 mm thick Screed bed or bedding layer of cement mortar in 1:6 complete all as specified and directed by Engineer in charge.

Material and labour for glazed ceramic, coloured, joint free tiles, 600 x 600 x 7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile colour over 15 mm thick Screed bed or bedding layer of cement mortar in 1:6 complete all as specified and directed by Engineer in charge.

Material and labour for Glazed ceramic tiles, coloured, 300x200x7 mm thick, as in vertical surfaces, set and jointed in neat cement slurry and pointed in coloured cement to match the tiles, over backing coat of 10mm thick in CM (1:4),finished rough complete all as specified and directed by Engineer in charge.

Material and labour for Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work n. exc 15 cm in width or girth; including cutting to edges, all mitres and stopped ends, etc.

Material and labour for18-20 mm thick granite (colour approved by Engr in charge) as in Bar counter platforms, machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types laid over 20 mm thick screed bed in CM (1:6) complete, all as directed by Engg-In-Charge.

Labour only for chamferring and rounding the straight and exposed edges of granite stone complete all as specified

Material and labour for RCC precast cement concrete type B1 1:2:4 (20mm graded aggregate) as in window or door cills, lintels,etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in cement mortar 1:4 complete all as specified

Material and labour for TMT mild steel bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Quality confirming to FE 500D complete all as specified and directed by Engineer in charge.

Material and labour for TMT mild steel bars 6mm dia upto and including 10mm dia, cut to length, bent to shape required, as in stirrups, spacers and binders and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Quality confirming to FE 500D complete all as specified and directed by Engineer in charge.

Material and labour for TMT mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Quality confirming to FE 500D complete all as specified and directed by Engineer in charge. x

Material and labour for preparing old steel surfaces of girth exceeding 10 CM and applying one coat of anti corrosive paint over coat of zinc primer complete all as specified and directed by Engineer in charge.

Supply and fix Factory Made Solid PVC Moulded Door Shutter, 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm prelaminated PVC sheet on back face, choice lamination and shade as approved, all as specified and as directed by Engg-In-Charge.

Supply and fix Solid core PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube all as specified and as directed by Engg-In-Charge.

Supply and fix extruded aluminium alloy handles size 100 mm fabricated type, anodised complete all as specified and directed by Engineer in charge.

Supply and fix butt hinges 125 mm long, extruded aluminium section with stainless mild steel hinge pin , bright polished and fixed, type B-11 complete all as specified and directed by Engineer in charge.

Supply and fix aluminium anodised barrel tower bolts of extruded section 75 mm long complete all as specified and directed by Engineer in charge.

Supply and fix aluminium anodised barrel tower bolts of extruded section 100 mm long complete all as specified and directed by Engineer in charge.

Supply and fix aluminium anodised barrel tower bolts of extruded section 200 mm long complete all as specified and directed by Engineer in charge.

Supply and fix floor door stopper 150 mm long of brass body and toungue, anodised , with hard drawn steel spring complete all as specified and directed by Engineer in charge.

Supply and fix door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg. complete all as specified and directed by Engineer in charge.

Material and labour in repairs (Dismantling existing false ceiling including frame work of any type), Anodised aluminium snap grid frame work for false ceiling supported with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 1.25 mm dia. 40 cm long complete all as specified (Sections for wall an23.5 x 23.5 x 1.5; Cross 'T' shall be 38 x 38 x 1.5 and main 'T' shall be of 38 x 60 x 2 mm, including 4mm thick non asbestos fibre cement building boards fixed or laid/ inserted to Aluminium framework with clips etc complete all as specified and as directed.

Supply and fix brass Mortice lock, vertical type, size 100 mm long, 04 lever complete all as specified and directed by Engineer in charge.

Supply and fix anodised aluminium alloy Harrison rails 20 mm dia, anodised aluminium alloy curtain rod with fixing brackets, stops, rollers etc complete all as specified and directed by Engineer in charge.

Supply and fix 1.0mm thick, plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed)with grade of zinc coating 275 complete all as specified and directed by Engineer in charge. & directed

Supply and fix PVC (SWR) pipes single socketed, 150 mm dia, of any length with rubber ring joints, fixed to walls (with necessary clamps as necessary) complete all as specified and directed by Engineer in charge. & directed

Supply and fix PVC (SWR) bends suitable for 150 mm dia and of any radius complete all as specified and directed by Engineer in charge. & directed

Supply and fix powder coated of any colour (thickness of powder coating not less than 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates (thickness of section shall be not less than 2 mm) including joining cleat for fixing etc. complete all as specified and directed by Engineer in charge.

Supply and fix powder coated of any colour (thickness of powder coating not less than 50 micron) Anodised aluminium door shutters, aluminium section weighing not less than 3.13 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified

Supply and fix powder coated of any colour (thickness of powder coating not less than 50 micron) Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 1.42 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

Supply and fix 5.5mm thick, figured glass (coloured pin headed type and glazing with aluminium clips in square n exc 0.5 sq. m in each pane complete all as specified

Supply and fix mild steel work such as Bands, straps, supports or stays for rainwater including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples;chain ; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; , plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed by Engineer in charge.

Material and labour Preparing new steel surfaces of girth exceeding 10 cm and applying two coats of synthetic enamel paint over a coat of zinc chrome primer.

Supply and fix glass shelf assembly with SS railing and toughened glass incl fixing to wall with brackets complete all as specified and directed by Engineer in charge. & directed

Supply and Fix 12mm thick prelaminated particle board, exterior grade, prelaminated on one side with decorative choice lamination and other side balancing white lamination, fixed with glazing clips to aluminium frame work of wall panelling/door shutters complete all as specified and directed Note: Aluminium frame work as in partition wall/wall panelling/door shutters will be measured and paid seperately

Material and labour for in repair 2nd class hardwood Plain fillets wrought square, rectangular section, clean sawn, secured with screw of sectional area exc 13 and n.exc 25 sqcm complete all as specified and directed by Engineer in charge.

Supply and Fix continious piano hinges, mild steel, bright finish, 30 mm width of flap complete all as specified and directed by Engineer in charge.

Supply and Fix aluminium anodised Hasp and staple, with mild steel hinge pin, incl bolt to hinge plate and fixed with screws, 100 mm complete all as specified and directed by Engineer in charge.

S & Fsolid PVC wall lining one side prelaminated consisting of 5 mm (+ 0.25mm) thick (American white colour) PVC sheet including 5 mm thick PVC sheet filet/ grid of width 50mm inclusive of solvent cement and fixing in wall on PVC frame as per specification and drawing all as specified and directed by Engineer in Charge and as per manufacturer instructions. Make : Rajshree or equivalent.

Material and labour for Hard core of broken stone or boulder of gauge not exceeding 63 mm deposited, spread levelled and rammed in layers not exceeding 15 cm thick to a true surface complete.

Material and labour for 75mm plain Cement concrete type D-2, 1:4:8 (using 40mm graded aggregate) as in sub-floors, sub bases of floor etc complete all as specified and directed by Engineer in Charge.

Material and labour for coloured chequered cement concrete tiles with white cement and pigments of size 30cmx30cmx25mm thick set and jointed in neat cement slurry and pointed in white/ coloured cement to match the tiles over and including 15 mm thick screed bed or bedding layer with CM 1:4 as in foot path etc complete all as specified and directed by Engineer in Charge.

Supply and fix extruded aluminium alloy handles size 125 mm fabricated type, anodised complete all as specified and directed by Engineer in charge.

Supply and fix 300 mm long Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.

Supply and Fix 35mm thick 2nd class Hard wood plain framed panneled shutter (any No of panels) with panels of veneered partical board or ply wood or bison board complete all as specified.

Material and labour for Preparing surface of old plastered surfaces of of any description and girth, not other described and applying one coat of external weather proof emulsion (weather coat) all as per manufacturers specifications/instructions complete all as specified and directed by Engineer in charge.

Material and labour for Preparing surface of old plastered surfaces of of any description and girth, not other described and applying two coats of external weather proof emulsion (weather coat) over one coat of primer all as per manufacturers specifications/instructions complete all as specified and directed by Engineer in charge.

Material and labour for preparing New plastered surfaces applying two coats of OBD over a thin layer of 2 mm thick Birla white putty to acheieve smooth and plane surface complete all as specified and directed by Engineer in charge..

Material and labour for Preparing new woodensurfaces and girth exceeding 10 cm and applying two coats of synthetic enamel paint over a coat of pink primer primer.

Supply and fix fibre reinforced PVC connecting pipe 60cm long with brass check nut and washer on both side complete all as specified and directed by Engineer in charge.

S & F fancy type pillar taps with capstian heads, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe of 15 mm dia and fixed.

S & F In repairs Wash basin, Vitreous China, white, flat back of size 550 X 450 mm, including cutting for and pinning in ends of bracket all as specified and directed by Engineer in Charge.

S & F 32 mm dia Waste coupling of PTMT (half or full threaded) for wash hand basins (Minimum weight 45gms) all as specified and directed by Engineer in Charge.

S & F 32 mm dia low density polyethylene pipes (LDPE) including elbows, bends, etc., of pressure rating 6 kg/ sq cm fixed to walls complete all as specified and directed by Engineer in Charge..

S & F Chromium plated angular stop cock cast copper alloy, fancy type, screwed both ends for iron pipe/PVC pipe for union and fixed for 15 mm bore of pipe with long shank and cup complete all as specified and directed by Engineer in Charge.

S & F15 mm bore galvanized iron tubes, medium grade, with all fitting and fixed complete to walls and ceilings or laid in floors, concealed in walls complete all as specified and directed by Engineer in Charge.

S & F stainless steel Grating doom 100mm dia complete all as specified and directed by Engineer in Charge

Dismantling of plain or corrugated steel sheetin, any gauge, thickness, inculding Nainital or similar pattern roof coverings complete all as specified and directed.

Taking down eaves gutters valley, weather board and rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks etc, including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories).

Dismantling wrought iron or MS work of any descriptions all as specified and as directed complete all as specidied.

S & F Rolled Mild steel roof trusses (framed) trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat section) inclusing distance pieces, cleats etc confirming to FE 410 W (Gde E-250) quality -

Fabrication and fixing only Steel work in truss dismantled including special washes etc using ERW or Induction buttweldded all as directed. Note : MS items obtained from dismantling shall be reused.

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 MM (tct) thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall and weather board, fixed with sell tapping screws to steel frame work, etc complete all as specified. Make : JSW/Multicolor/TATA

M & L for 0.63 mm thick Plain, galvanised, mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed with grade of zinc coating 275.

S & F wind tie 40 x 6 mm or any other size flat iron including necessary drilling holes for fixing with self tapping screws over galvalumne sheets complete all as specified and directed.

S & F Rolled Mild Steel Plates (plain or Chequered) channels, square and flats cut or notched, forming holes with riveted bolted or welded existing MS tubular section as necessary confirming to FE 410-W (Gde E-250) quality-A, complete all as specidied and directed.

M & L for applying two coats of synthetic enamal paint over single coat of red oxide including preparation of new steel surface over 10cm width or girth complete all as specifi9ed and directed.

M & L for applying two coats of synthetic enamal paint over single coat of red oxide including preparation of new steel surface not exceeding 10 cm width or girth complete all as specified and directed.

S & F 110 mm bore dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F 110 mm bore dia PVC (SWR) bends any radius complete all as specified and directed.

SCHEDULE 'A' : PART -II Internal Electric supply:- Taking down carefully copper/aluminum existing point wiring (light/fan/socket or power points) complete incl wooden battens/casing capping or conduit etc (without disturbing existing fittings point wiring etc) and all connected fittings such as switch, socket, ceiling rose, lamp holder, brackets ceiling fittings, bulk head fittings and fan regulator etc and making good to disturbed surfaces of wall floor etc all as directed.

Taking down unserviceable sub main wiring of any type, any size, making good to the disturbed surfaces by matching with the adjoining surfaces.

Material and labour for Point wiring with 1.50 Sqmm (nominal area) PVC insulated unsheathed copper stranded conductor (FRLS) cable in and including PVC casing and capping of suitable size including 1.5 Sqmm PVC insulated copper earth continuity conductor connected to common earth dolly controlled by one switch on PVC board all as specified and directed for the following Light Point/ Fan Point/Bell Point :-

All as per Sl item No. 2.03 here-in-before but of 5 Amps socket Point Same board)

All as per Sl item No. 2.03 here-in-before but 5 Amps socket Point (Independent)

All as per item No. 2.03 above but with 2.50 Sqmm and 2.50 Sqmm earth contunity stranded copper PVC insulated cables for one 3 Pin 15 Amps socket out let on the independent board.

Supply and fix modular switch 1 way 6A, 1 module all as specified

Supply and fix Modular switch 1 way 16A, 1 module all as specified

Supply and fix Modular socket 6A 2/3 pin, combined 2 module all as specified

Supply and fix Modular socket 6/16A, 3 pin combination 2 module all as specified

Supply and fix Modular step type fan regulator 120W-2 module all as specified

Supply and fix modular Bell push, 6A 1 module all as specified

Supply and fix Bell multi music type all as specified

Supply and fix modular white cover plate with frame, 1 module all as specified

All as per Sl item No. 2.14 here-in-before but 2 module

All as per Sl item No. 2.14 here-in-before but 3 module

All as per Sl item No. 2.14 here-in-before but 4 module

All as per Sl item No. 2.14 here-in-before but 6 module

Supply and fix Metal flush box 1 or 2 modules for modular switches all as specified

All as per Sl item No. 2.19 but for 3 modules

All as per Sl item No. 2.19 but for 4 modules

All as per Sl item No. 2.19 but for 6 modules

Supply and fix single pole and netural enclosure with two pin and earth plug and socket complete with one single pole MCB 20 Amps all as specified

Supply and fix MCB distribution board SPN12 way double door complete with 200Amps rated busbar. (Make: C&S, Cat no-CSDBSPNPDD12 equivalent of in Siemens/L&T)

Supply and fix MCB DP 240 volt, 63 Amps, 10KA (Make: C&S Cat No CSMBS2D63 or equivalent in siemens/L&T) all as specified

Supply and fix MCB SP 240 volt, 6-32 Amps, 10KA (Make: C&S Cat No CSMBS2B20 or equivalent in siemen/L&T) all as specified

Supply and fix ceiling rose three terminals PVC/poly carbonate isolated body all as specified

Supply and fix lamp holder PVC/poly carbonate type with black plate suitable for angle holder

Material and labour for sub main wiring with 1100 volts grade , 2 runs of 6 sqmm pvc insulated unsheathed multi stranded copper conductor cable drawn through and including PVC conduit fixed on surface to wall/ceiling by means of MS screws and saddles alongwith one run of 6 Sqmm multi stranded copper conductor cable green in colour as continuous earth wire complete all as specified and directed

Material and labour for sub main wiring with 1100 volts grade , 2 runs of 10sqmm pvc insulated unsheathed multi stranded copper conductor cable drawn through and including PVC conduit fixed on surface to wall/ceiling by means of MS screws and saddles alongwith one run of 10Sqmm multi stranded copper conductor cable green in colour as continuous earth wire complete all as specified and directed

Supply and fix LED Down light 20 Watt Lyra series spot light 6 watt LED lighting cob PDC aluminium housing eye ball, downlighting with swiveable design ,warm white ,complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, complete all as specified and directed (Make: C&S CP No.LTCR6CBLEDRND/W OR equivelant in Philips/Wipro/GE)

Supply and fix LED SLIM Down LIGHT20 Watt Carina series luminare square recessed PDC Aluminium housing down lights warm white and glare-free light complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, complete all as specified and directed (Make: C&S, CP No. LTCRSLM20 HPLED SQ/W or equvalent in/Bajaj/Philips/CG)

Supply and fix LED tube light fitting T3, Nakshatra series type, surface/wall mounted LED batten with extruded aluminium housing & robust construction. 1x20w, 230V, box type etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, complete all as specified and directed (Make: C&S CP NO.-LTTB4F 20W LED/W OR equivelant in Philips/Wipro/CG)

Supply and fix MCB distribution board TPN 04 way double door complete with 200Amps rated busbar. (Make: C&S, Cat no-CSDBTPNHDD4 equivalent of in Siemens/L&T)

Supply and fix MCB TPN 415 volt, 63 Amps, 25KA (Make: C&S Cat No CSMBS4C63 or equivalent in siemen/L&T) all as specified

Supply and fix MCB DP 240 volt,40 Amps, 10KA (Make: C&S Cat No CSMBS2B40 or equivalent in siemens/L&T) all as specified

Supply and fixing full glow ceiling lightis( 5 watt) a beautifully designed luminare which is bound to delight the occupents with refreshing and comfortable exoerience through its pure from and glare-free light complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, Make: Philips, CP No. SM200C LED 10S 4000 PSU OD WH or C&S/CG /Bajaj, complete all as directed

MS KAMARIKAR CONSTRUCTION

P NAIDU

Allied Trading Company