Construction of Multipurpose Hall at NRS Puga.

Amount

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and liftupto 1.5m.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses,plinth and string courses, fillets, columns, pillars,piers, abutmen"ts, posts ans sturts, etc. upto floor five level excluding cost of centring,shuttering,fmishingandreinforcement.1:1.5:3 (1 cement : 1.5 coarse sand : 3graded crushed stone aggregate 20mm nominal size)

Reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars.

Centring and shuttermg including strutting, propping etc.and removal of form for· Lintels, beams, plinth beams, girders,bressumers and centilevers.

Providing wood work in frames of doors, windows,clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) Second class kail wood

Providing and fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centring, shuttering and complete.1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) Nallah

Strctural steel work riveted or bolted in built up sections,trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 40x40x6mm.

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G. I limpet washers or with G. I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape whereever required. 0.63mm thick with zinc coating not less than 27 5gm/m2

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of engineer- in charge. First class kail wood.

Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) 12 mm thick.

Providing and fixing glazed shutters for doors, windows and clerestory windows using 10kg/sqm (4mm thick) float glass panes including lSI marked M.S. pressed butt hinges bright finished of required size with necessary screws. First class kail wood.

15mm cement plaster on the rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1 : 4 ( 1 cement : 4 fine sand)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and in-eluding priming coat with cement primer

Finishing walls with water proofing cement paint ofrequired shade New work (two or more coats) applied @3.84 kg/10 sqm.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:4:8 (1 cement: 4 fine sand : 8 graded stone aggregate 40mm nominal size) Nallah.

Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.100 mm for door

Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.. 250x10 mm for Window.

Providing and fixing aluminium sliding door bolts lSI marked anodised (anodic coating not less than grade AC10 as per IS : 1868) transparent or dyed to required colouror shade with nuts and screws etc. complete.300x16 mm

Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. 300x10 mm

Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. 150x10 mm

Providing and laying of PVC panelling complete Job.

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position. Budloo /Fir wood.

Providing and fixing of paneling 4" Complete Job.

Carriage of material by MT a) Cement an avg. lead of 180 kms

Sand an average lead of 05 Km

Stone aggregate an avg. Lead of 08 kms

M/S TUNDUP GURMET