Construction of Passenger Hall near Northern side Jetty at Kalpeni

Amount

Surface dressing of the ground including removing vegitation and in equalities not exceeding 15cm deep and disposal of rubbish lead up to 50 metres and lift up to 1.5 metres. (Labour Element)

Earth work in excavation by manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 Sq.m on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (Labour Element)

Up to 1.50 metre

Up to 1.50 metre to 3 metres

Up to 3.00 metre to 4.50 metres

Up to 4.50 metre to 6.00 metres

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc layers not exceeding 20cm plinth, sides of foundations etc layers not exceeding 20cm and watering lead up to 50 mtr and lift up to 1.5 metres. (Labour Element)

Providing and laying cement concrete 1:4:8 (1 cement: 4 M sand: 8 granite chips ) foundation and plinth. (Labour Element)

Providing and laying cement concrete 1:5:10 (1 cement: 3 M sand:6 granite chips) foundation and plinth. (Labour Element)

Providing and laying DPC 50mm in cement concrete 1:2:4 (1 cement: 2 M sand: 4 granite chips 20mm nominal size). (Labour Element)

Reinforced cement concrete 1:1.5:3 (1 cement: 1.5 M sand: 3 granite chips 20mm nominal size) excluding cost of centring and shuttering and reinforcement All work up to plinth level. (Labour Element)

Foundation footings bases of column etc, and mass concrete.

Reinforced cement concrete work in (wall any thickness) including attached pilasters, buttresses, plinth and string course, fillets, columns, pillars, piers, abutments, post and struts etc.. up to floor five level excluding cost of centering and shuttering finishing and reinforcement. 1:1.5:3 ( 1 cement: 1.5 M sand: 3 graded stone aggregate 20 mm nominal size. (Labour Element)

Reinforced cement concrete work in beams, Suspended floors, roofs, having slope up to 15 degree landings, shelves chajjas, lintels, bands, plain window sills, staircase and spiral stair case up to floor five level excluding cost of centering and shuttering finishing and reinforcement.with 1:1.5:3 (1 cement: 1.5 M sand: 3 graded stone aggregate 20 mm nominal size). (Labour Element)

Providing and fixing up to floor two level precast reinforced cement concrete 1:2:4 (1 cement 2 M sand 4 graded stone aggregate 20mm nimnal size) set in position with cement mortar 1:2 1 cement 2 M sand) and finished smooth with 6mm thick cement plaster 1:3 (1 cement: 3 M sand) on exposed surface including centring and shuttering in baffle wall and slab. (Labour Element)

Reinforced cement concrete 1:2:4 (1 cement: 2 M. Sand: 4 graded stone aggregate 40mm nominal size) excluding the cost of centring and shuttering and reinforcement for foundation and plinth for well sterning. (Labour Element)

Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases of columns, etc. for mass concrete. (Full Cost)

Centering and shuttering including strutting, propping etc. and remova of form for: Lintels, beams, plinth beams, girders, bressumers and cantilevers. (Full Cost)

Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform. (Full Cost)

Centering and shuttering including strutting, propping etc. and removal of form for: Columns, Pillars, Piers, Abutments, Posts and Struts. (Full Cost)

Centering and shuttering including strutting propping etc. and removal of form work for sterning. (Full Cost)

Cold twisted steel reinforcemnt for R.C.C. work including bending, binding and placing in position complete. (Labour Element)

Cement concrete block (machine moulded) masonry in Foundation and plinth in CM 1:6 (1 Cement: 6 M.sand) with blocks of size 40cmx20cmx15cm. (Labour Element)

Cement concrete block (machine moulded) masonry in Superstructure above plinth level in CM 1:6 (1 Cement: 6 M.sand) with blocks of size 40cmx20cmx15cm. (Labour Element)

Half brick work with modular bricks of class designation in foundation and plinth in C.M.1:4 (1Cement: 4 Metal sand). (Labour Element)

Half brick masonry (I class) in cement mortar 1:4 (1 cement: 4 M. sand) in super structure above plinth level upto floor five level. (Labour Element)

6mm cement plaster to ceiling 1:3 (1 cement: 3 plastering sand). (Department shall provide cement. Contractor has to bring P.Sand) (Full cost)

12mm cement plaster 1:6 (1cement: 6 Plastering sand) on the out side. (Department shall provide cement. Contractor has to bring P.Sand) (Full cost)

15mm cement plaster 1:6 (1 Cement: 6 plastering sand) on the rough side or inside. (Department shall provide cement. Contractor has to bring P.Sand) (Full cost)

12mm cement plaster 1:4 (1cement: 4 plastering sand). (Department shall provide cement. Contractor has to bring P.Sand) (Full cost)

12mm cement plaster with CM 1:3 (1 cement: 3 P.sand). (Department shall provide cement. Contractor has to bring P.Sand) (Full cost)

Neat cement punning. (Labour Element)

Providing wood work in frames of doors, windows , clearestory windows and other frames wrought, framed and fixed in position complete 1st class Karimaruthu wood/Irul/Ayni. (Full Cost)

Providing and fixing 35mm thick panalled glazed or panelled and glazed shutters for doors and windows and clestory windows including anodised aluminium butt - hinges with necessary screws Karimaruthu wood//Irul/Ayni including 4mm thick glass panes. (Full Cost)

Providing and fixing Flush door shutters confirming to IS:2202 (part.I) decorative type, core of block board construction frame of first cladd hard wood and well matched first class teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless steel butt hinges with necessary screws. (Full Cost)

Providing and fixing karimaruth wood/ Irul/Ayni 25mm square wooden bars at required spacing in wooden frames of windows and clerestory windows. (Full Cost)

Providing 40X5mm Iron hold ast 40cm long i/c fixing to frames with 10mm dia bolts, nuts and wooden plugs and embedding in cement concrete blocks of sizes 30x10x15cm of mix 1:3:6 (1 cement: 3 M.sand: 6 stone aggregate 20 mm nominal size). (Full Cost)

Providing and fixing in position collapsible steel shutters with vertical channels 20xl0x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia, steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. (Full Cost)

Providing and fixing to existing door frames. 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels confirming to TADS 6: 1993 and / or IS: 14856 - 2000 including fixing to frames. (For WC and bathroom door shutter). (Full Cost)

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90mm x 45mm having single rebate of 32mm x 15mm to receive shutter of 30mm thickness. The laminate shall be molded with fire resistantgrade unsaturated polyester resin and choppedmat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fibreglass from all sides. MS stay shall be provided at the bottom to steady the frame. (Full Cost)

Providing and fixing 100mm Bright finished brass mortice latch and lock with 6 levers and a pair of lever handles with necessary screws. (Full Cost)

Providing and fixing brass door latch with necessarys screws etc complete. Brass door latch 250x16x5 mm. (Full Cost)

Providing and fixing brass tower bolt (barral type) wth necessary screws etc complete. (Full Cost)

Brass tower bolt 250x10mm

Brass tower bolt 100x10mm

Providing and fixing brass handles with necessary screws etc complete. (Full Cost)

Providing and fixing Bright finished brass casement stay with necessary screws. 250 mm weighing not less than 280 gms. (Full Cost)

Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, screws etc. to suit shutter thickness complete. (Full Cost)

Providing and fixing Bright finished brass Hydraulic door closer with necessary fittings &screws. (Full Cost)

Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate,with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete : 20 mm dia. (Full Cost)

Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs, beams during laying including painting the exposed portion of loop, all as per standard design complete. (Full Cost)

Providing and laying vitrified matt finish floor tiles (premium quality) in diffrent sizes (thickness to be specified by the manufacture) with water absorbtion less than 0.08 % and confirming to IS: 15622 of approved make in all colours and shades, laid 20mm thick cement mortar 1:4 (1 cement: 4 P sand) including grouting the joints with white cement and matching pigments etc.. complete. Size 600x1200 (flooring), Khajariya matt finish vitrified tiles/Jonson/Bell. (Department shall provide cement. Contractor has to bring tiles and P.Sand) (Full cost)

Providing and laying vitrified matt finish tiles (premium quality) in diffrent sizes (thickness to be specified by the manufacture) with water absorbtion less than 0.08 % and confirming to IS: 15622 of approved make in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 P.sand ) including grouting the joints with white cement and matching pigments etc. complete. (Skirting), 600x1200, Khajariya matt finish vitrified tiles/Jonson/Bell. (Department shall provide cement. Contractor has to bring tiles and P.Sand) (Full cost)

Providing and fixing ceramic glazed floor tiles of size 300x300mm (thickness to be specified by the manufacture) of first quality confirming to IS:15622 of approved make,in colours such as White, ivory, Grey, Fume red brown, laid on 20 mm thick cement mortar 1:4 (1cement, 4 P.sand) and joining with white cement and matching pigment etc... complete. Anti skid tiles for Khajariya/ Johnson/ Bell. (Department shall provide cement. Contractor has to bring tiles and P.Sand) (Full cost)

Providing and fixing 1st quality ceramic glazed wall tiles confirming to IS:15622 ( thickness to be specified by the manufacture ) of approved make,in all colours,shades except burgundy ,bottle green,black of any size as approved by engineer-in-charge in skirting,risers of steps and dado over 12mm thick cement mortar 1:3 ( 1cement, plastering sand ) and joining with grey cement slurry @3.3 kg per sqm,including pointing in white cement mixed with pigment of matching shade complete. Khajariya/Jonson/Bell glazed wall tiles size 300x450mm. (Department shall provide cement. Contractor has to bring tiles and P.Sand) (Full cost)

Cement concrete flooring 1:2:4 (1 cement: 2 M.sand: 4 stone aggregate) finished with a floating coat of neat cement including cement slurry, rounding of edges and strips etc. But excluding the cost of nosing the steps etc. complete. 40 mm thick with 12.50mm nominal size stone aggregate. (Labour Element)

Providing edge moulding to 18mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Tile work. (Full Cost)

Finishing wall with water proofing cement paint of approved brand and manufacture of required shade on new work (two or more coats applied @3.84Kg/10 sqm). (Berger/Asian/Nerolac). (Full Cost)

Providing and applying White cement based wall putty of average thickness 2mm of approved brand and manufacture, over plastered surface to prepere the surface even and smooth complete. Birla white/JK wall care/ Bison). (Full Cost)

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. Water thinnable cement primer. (Berger/Asian/Nerolac). (Full Cost)

Finishing with Delux paint system for interiors using primer as per Manufactures specification. Two or more coats Teflon (Royal Coated) applied on wall @ 1.25 ltr/10 Sqm For Interior Wall. (Berger/Asian/Nerolac). (Full Cost)

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grms/litr, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. For exterior wall paint (Berger/Asian/Nerolac). (Full Cost)

Painting Wood work with Deluxe Multi surface paint to give an even shade.Two or more coats applied on @0.90ltr/10 sqm) over under coat of primer applied @ 0.75 ltr/10 sqm of approved brand and manufacture. (Berger/Asian/Nerolac) (Full Cost)

French spirit polishing on a new work (two or more coats) including a coat of wood filler with ready mixed polish of approved brand and manufacture. (Sheenlac/Skylark/Asian Paints) (Full Cost)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This inclues joining of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work, including cutting chases and making good the walls etc.). (Class I, SDR 11). (Full Cost)

15mm Nominal bore

32mm Nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This inclues joining of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. For External work. (Class I, SDR 11). (Full Cost)

15 mm nominal bore

20 mm nominal bore

32 mm nominal bore

Providing and fixing CP brass bibcock of approved quality and manufacture complete. Conforming IS 8931, 15mm nominal bore. (Cera/ Hindware/ Parryware). (Full Cost)

Providing and fixing CP brass stopcock of approved quality and manufacture complete. 15mm nominal bore. (Cera/ Hindware/ Parryware). (Full Cost)

Providing and fixing G.M. full way wheel valve of approved quality and manufacture complete. 25mm nominal bore. (Zoloto/Leader/Orient) (Full Cost)

50 mm nominal bore

Providing and fixing health faucet of approved quality and manufacture complete. (Cera/ Hindware/ Parryware) (Full Cost)

Providing and fixing nominal guage PVC Pipe of approved quality compleate with special flang compression type fittings including trenching and re filling etc. External work. (6Kg/ cm2)(Prince/Supreme/Finolex) (Full Cost)

110mm nominal bore

25 mm nominal bore

32 mm nominal bore

50 mm nominal bore

63 mm nominal bore

Providing and placing on terrace (at floor level) polythene water storage tank ISI:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipe but without fittings and the base support for tank. 500 litre capacity. (Sintex/Ocean/Aquatech). (Full Cost)

Providing and fixing white vitrous China water closet Pedestal pan (European) type WC pans with white plastic seat and lid and rubber buffers, 15 white vitrous China low level flushing system of approved make with fittings and brackets 40mm flush bend, 20mm over flow pipe with complete including cutting and making good the walls and floors where required. White EWC pan with plastic seat and lid. (Cera Conventional type Model No.2008/Hindware/ Parryware). (Full Cost)

Providing and fixing white vitrous China wash basin with RS or CI brackets painted white, 15mm C.P bras pillar tap and C.P brass chain and rubber plug 32mm C,P. brass waste of standrad pattern 32mm diametre and waste pipe complete including cutting and making good the walls and floors where required. White vitreous China Flat back wash basin 550x400mm with one 15mm C.P. brass pillar tap. (Cera Cognac Model No.1011/ Hindware/Parryware). (Full Cost)

Providing and fixing 600x450mm mirror of superior glass (approved quality) complete with 6mm thick asbestose sheet ground fixed to wooden cleats with necessary screws and washers. (Cera model No.5567 size 600x300mm/ Hindware/ Parryware). (Full Cost)

Providing and fixing stainless steel towel rail with brackets fixed to wooden cleats with CP Brass screws with concealed fitting arrangement of approved quality and colour. 600 mm long towel rail brackets with total length of 645 mm,width 78mm and effective height of 88 mm, weighing not less than 190 gms. (Cera/Parryware/Neycer). (Full Cost)

Providing and fixing stainless steel soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements weighing not less than 106 gms. (Cera/Parryware/Hindware). (Full Cost)

Providing and fixing PVC trap with grating of self cleansing design with screwed down or hinged grating with or without vent arm complete. Including cost of cutting & making good the walls and floors. 110mm. (Full Cost)

Providing and fixing on wall face PVC soil waste and vent pipe. 75mm dia pipes. (6 Kg/ cm2)(Prince/Supreme/Finolex). (Full Cost)

Providing, laying and jointing PVC pipes grade 'A' with solvent cement including cutting jointing etc complete. (6Kg/ cm2)(Prince/Supreme/Finolex). (Full Cost)

110mm diametre

90mm diametre

Providing and fixing 1 HP Pump set. (Crompton Greaves/Kirloskar Chhotu/Sameer I-Flo) (Full Cost)

Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity countrers, window sills facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar1:4 (1 cement: 4 plastering sand) with jointed treared with white cement, mixed with matching pigment, epoxy toch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels. Granite of any colour & shade area of slab upto 0.50 Sqm. (Department shall provide cement. Contractor has to bring granite and P.Sand) (Full cost)

Providing edge moulding to 18mm thick Granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work. (Full Cost)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required EPDM rubber/ Neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer- in-charge. (Glazing and panelling to be paid for separately): For fixed portion. Powder coated aluminium (minimum thickness of powder coating 50 micron). (Full Cost)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 8 mm thickness. (Full Cost)

Providing and fixing aluminium grills (anodised transparent or dyed to required shade according ti IS:1868 with minimum anodic coating of grade AC 15) approved design /pattern ,with approved standard section and fixed to the existing window frame with C.P.brass/stainless steel screws@200 mm centre to centre, including cutting the grills to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening ,all complete as per requirement and direction of Engineer- incharge. (Full Cost)

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 Kg/sqm. b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 Kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 Kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. d) fourth and final layer of brick tiling with cement mortar (which will be paid separately). For the purpose of measurement the entire treated surface will be measured. (Full Cost)

Providing and laying cement concrete 1:5:10 (1 cement: 5 M sand: 10 graded stone aggregate 40mm nominal size) around the pipe 15cm thick as per standard design excluding cost of centring, shuttering and reinforcement. 100 mm dia. (Full Cost)

Providing and fixing M.S welded mesh 50x50x mm with necessary binding wire. (Full Cost)

Providing and fixing chicken mesh with cement plaster 1:4 (1 cement: 4 M.sand) for ferro cement tank. (Full Cost)

Providing and fixing PVC pipe half round eaves gutter with M.S brackets including bolts and nuts and necessary fitting as per approved brand and manufacture etc. complete 200 mm (10 Kg/ cm2). (Full Cost)

Mohammed Abdul Latheef K P

MOHAMMED NAVAB SHAH C G

BELLE BUILDERS

Ameerudheen. P