REPAIR/REPLACEMENT AND MAINTENANCE OF MOTOR PUMP STARTER, ELECTRIC PANNEL AND OTHER RELATED ACCESSORIES AT PUMP HOUSES AT AF STN GWALIOR

Amount

Excavation in trenches in soft & loose soil not exceeding 1.5 metre deep and not exceeding 1.5 m width and getting out soil including forming bottom surface to required slope/gradient for laying cables/pipes etc. all as specified and directed including removing cable protection PCC covers/ bricks & stacking serviceable covers / bricks for reuse and disposal of unserviceable covers within 50 m all as specified and directed.Note : Excavation shall be made carefully in order to avoid damage of existing cables and protection covers.

Returning, filling in including spreading, leveling, watering and well ramming in layers of 25 cm thick after the cables etc. are laid, jointed & tested complete all as specified and directed.

Removal of surplus excavated spoil not exceeding 50 Mtr distance and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

S&F bricks well burnt sub class ‘B’ bricks in trenches on cable as cable protection across the length of the cable (width wise) complete all as specified and as directed.

M & L for sand cushioning for cable protection with dry river sand and punning to provide required cushioning for UG cable complete all as specified and directed.

Disconnecting ,taking out and removing from trenches/ducts /sleeve/on pole/wall etc existing LT UG XLPE insulated, armoured cable of any description, any size/core and in any position complete all as specified and directed for the following sizes of cable :- Note: T & P and Earth work shall be measured & paid separately under respective item.

(a) 95 sqmm 3.5 Core

(b) 70 Sqmm 3.5 Core

(c ) 50 Sqmm 3.5 Core

(d) 35 Sqmm 3.5 Core

(e) 25 Sqmm 4 Core

Supplying, laying, jointing & testing XLPE insulated & PVC sheathed armoured LT cable, 1100 volts grade heavy duty with aluminium conductor of the following sizes laid in trenches/pipe/fixed on the wall etc complete all as specified and directed:

(a) 95 sqmm 3.5 Core

(b) 70 Sqmm 3.5 Core

(c ) 50 Sqmm 3.5 Core

(d) 35 Sqmm 3.5 Core

(e) 25 Sqmm 4 Core

Supply, laying & fixing in replacement GI light grade pipes of size 80 mm dia for cable protection laid in trenches/floor/roof and on the walls, with all accessories, complete all as specified and directed.

Supply, laying & fixing in replacement GI light grade pipes of size 50 mm dia for cable protection laid in trenches/floor/roof and on the walls, with all accessories, complete all as specified and directed.

Supply only Ammeter 0 – 100 Amps, 96 mm x 96mm, digital type of accuracy class 0.5 suitable for 50Hz, 3 Phase, 415 Volts AC supply complete all as specified and directed. Note:- Labour charges for taking out of old/brocken/burnt Ammeter shall be included in ser Item No 10.00 here-in-before

Supply only Voltmeter 0 – 500 Volts, 96 mm x 96mm, digital type of accuracy class 0.5 suitable for 50Hz, 3 Phase, 415 Volts AC supply complete all as specified and directed. Note:- Labour charges for taking out of old/brocken/burnt Voltmeter shall be included in ser Item No 10.00 here-in-before

Supply only current transformer of CT ratio 100/5 Amps suitable for 50Hz, 3 Phase, 415 Volts AC supply complete all as specified and directed. Note:- Labour charges for taking out of old/brocken/burnt current transformer shall be included in ser Item No 10.00 here-in-before

Supply only Indicating lamps neon type with holder for 12 volts DC supply complete all as specified and directed. Note:- Labour charges for taking out of old/brocken/burnt Indicating lamps shall be included in ser Item No 10.00 here-in-before

Supply only Moulded fuse holder and fuse base, HBC type for 415 volts AC circuit having rating of 20 Amps with BS type fuse link complete all as specified and directed. Note:- Labour charges for taking out of old/brocken/burnt Moulded fuse holder and fuse base shall be included in ser Item No 10.00 here-in-before

Supply only phase indicator LED type (red/green) complete all as specified and directed. Note:- Labour charges for taking out of old/burnt phase indicator LED shall be included in ser Item No 10.00 here-in-before

Supply only Single Phase preventer complete all as specified and directed. Note:- Labour charges for taking out of old/brocken/burnt Single Phase preventer shall be included in ser Item No 10.00 here-in-before

Material & Labour for Preparation/ repair of the old decorated existing external and internal steel surfaces of feeder pillar boxes/panels/ boards/doors of any description and in any position including removal of disintegrated & deteriorated paint either by hand scrapping or by blow lamps, applying necessary filler coat and stopping as required and applying Two or more coatsof 100% Premium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance asper IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including primingcoat of exterior primer applied @ 0.90 litre/ 10sqm over new surface applying two coats of synthetic enameled paint (grey in color) over a coat of red oxide primer with using spray machine on old prepared surfaces complete all as specified and directed. Note : Rates quoted by the contractor are deemed to include for writing the MES /SM No and other relevant details with paint in the pattern and style as approved by the Engineer-in-Charge

Supply and fixing MCCB, adjustable type, four Pole, 415 V all as specified and directed for following Amps & breaking capacity :-

(a) 125 Amps, 25/26 KA

(b) 250 Amps , 35/36/37 KA Note for item No 20.01 and 20.02:- Labour charges for taking out of old/brocken/burnt MCCB shall be included in ser Item No 10.00 here-in-before

Supply & fixing Isolator TPN, 415 V, 63 Amps (‘C’ series) having current rating 10 KA complete all as specified and directed. Note:- Taking out of old/brocken/burnt Isolator TPN shall be included in ser item No 10.00 here in before

Taking down old /unsv thermal over load relay any capacity and any make. S&F thermal over load relay auto and manual resetting having capacity 17-25 Amp suitavle for contactor CN5 to CN6 complete all as specified and directed.

Taking down old /unsv over load relay & S&F in repair thermal over load relay auto and manual resetting having capacity 30-40 Amp suitavle for contactor CN5 to CN6 complete all as specified and directed.

Taking down old /unsv MPCB any capacity and any make. S&F MPCB relay range 13-18 Amp , breaking capacity not less than 15kA at 415 Volt type MB2-20complete all as specified and directed.

Taking down old /unsv MPCB any capacity and any make. S&F MPCB relay range 17-23 Amp , breaking capacity not less than 10kA at 415 Volt type MB2-21 complete all as specified and directed.

Taking down old /unsv MPCB any capacity and any make. S&F MPCB relay range 24-32 Amp , breaking capacity not less than 10kA at 415 Volt type MB2-32 Make: Havells or equivalent ofCROMPTON/INDO ASIAN with and including MPCB enclosure having IP-65 protection type MB2-E complete all as specified and directed.

Taking down star- delta starter any make and capacity and S&F deluxe automatic star-delta submersible pump starter 415 Volt, 50 Hz having range 10 HP/7.5 KW contractor size 18 overload relay range 9-13Amp complete all as specified and directed.

Taking down star- delta starter any make and capacity and S&F deluxe automatic star-delta submersible pump starter 415 Volt, 50 Hz having range 12.5HP /9.3 KW contractor size 18 overload relay range 12-18 Amp complete all as specified and directed.

Taking down star- delta starter any make and capacity and S&F deluxe automatic star-delta submersible pump starter 415 Volt, 50 Hz having range 20HP /14.9KW contractor size 32overload relay range 17-25 Amp complete all as specified and directed.

Taking down star- delta starter any make and capacity and S&F deluxe automatic star-delta submersible pump starter 415 Volt, 50 Hz having range 30HP /22.4KW contractor size 50overload relay range 30-40 Amp complete all as specified and directed.

Taking down old /unsv power contactor and S&F new power contactor type MNX 415 Volts having capacity 18 Amp 1 No and 1 NC MNX 18 complete all as specified and directed.

Taking down old /unsv power contactor S&F new power contactor type MNX 415 Volts having capacity 22 Amp 1 No and 1 NC MNX 22 complete all as specified and directed.

Taking down old /unsv power contactor S&F new power contactor type MNX 415 Volts having capacity 32 Amp 1 No and 1 NC MNX 32 complete all as specified and directed.

Taking down old /unsv power contactor and S&F new power contactor type MNX 415 Volts having capacity 50 Amp 1 No and 1 NC MNX 50 complete all as specified and directed.

Taking down old /unsv power contactor and S&F new power contactor type MNX 415 Volts having capacity 80 Amp 1 No and 1 NC MNX 80 complete all as specified and directed.

Taking down old /unsv Flat submersible cable of any capicity and S&F Flat 10 sqmm three core copper pvc insulated industrial cable for submersible complete all as specified and directed.

Taking down old /unsv Flat submersible cable of any capacity and S&F Flat 16sqmm three core copper pvc insulated industrial cable for submersible complete all as specified and directed.

Taking down old /unsv motor protection relay of any size and S&F motor protection relay including single phase prevntion, Dry running motor,under current, over current phase reversal protectin type MPRD2 complete all as specified and directed.

Taking down old /unsv Voltage protection relay of any size S&F Voltage protection relay including adjustable setting and protection of unbalance,phase failure, under voltage, over voltage type VMRD2, complete all as specified and directed.

Taking down Water Level Controller, automatic type and S&Fof water level controllar, automatic type havin 450m rangte, 170-250 voltage, 50-60 Hz frequency, size 21.4 cm x 12.5 cm x 4 cm,Weight 100 gm, black complete all as specified and directed

M/s Anupam Construction Co.

S K MECHANICAL WORKS

m/s anil traders

Uma engineers