REPAIR TO ROAD, POT HOLES, ROAD BERMS INCLUDING ROAD FURNITURE UNDER GE (MCTE) MHOW

Amount

M&L for preparation of black top surfaces of road by brushing with wire brushes, levelling, cutting with scraper for removing caked mud etc. sweeping with brooms and finally fanning cleaned surface with gunny bags to romove all loose dirt etc & applying evenly a tack coat with bitumenious primer / tack coat, using paving bitumen of Grade VG-30 at the rate 5 Kg per 10 Sqm complete all as specified and as directed.

M&L for 30mm thick (consolidated thickness) premixed hot mix Asphaltic semi dense concrete carpet using 5.5% of binder content (VG-30 Grade paving bitumen) by weight of total mix including rolling with power road roller and consolidation to required gradient and camber complete all as specified and directed. Note :- (i) Laying shall be done by means of self-propelled mechanical paver, finishing with electronic sensor and hydraulic controls with suitable speed and capable of laying, spreading, tamping and finishing. (ii) Mix shall be obtained from hot mix plant. (iii) Cost of testing charges, materials and transportations shall be inclusive in the unit rate and no extra payment shall be admissible on this account.

M&L for premix bituminous macadam (consolidated thickness not more than 75 mm) with 4% binder content of paving bitumen of grade (VG-30) by weight of total mix laid and rolled with 8-10 tonne power roller to required gradient and camber complete all as specified and directed. NOTE: - (i) Cost of testing charges, materials and transportations etc for job mix formula shall be inclusive in the unit rate and no extra payment shall be admissible on this account. (ii) Mix shall be obtained from hot mix plant and spreading shall be done by using mechanical paver only.

M&L for repair to potholes depth, not exceeding 30 mm area not exceeding 2 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming including supply of road metal and making good by applying a tack coat with bitumenious primer / tack coat, using paving bitumen of Grade VG-30 at the rate 10 Kg / 10 Sqm complete all as specified and as directed. and well rolled and rammed and rolled with 8 to 10 tonnes power rollercomplete all as specified and directed.

S&F in repairs Cat Eye as (Road Stud) of 120 mm X 90 mm size made of poly-carbonate moulded body with electronically welded prismatic retro range on both sides for maximum retro reflection in wet and dry condition to be fixed with bituminous adhesive BT-69 any disctiption complete including removal of old cat eye complete all as specified and directed. Make :- Dark Eye / Sinor / Sun Eyes / 3M

S&F super delux quality solar stud of Aluminium body including solar- powered by monocrystal solar panel. One high capacity Ni-Cd rechargable battery Approximate 1000 mtrs LEDs- 10mm, 3 pieces each side and total 6 pieces are used for high brightness of different colours back up- 12 hours of comtinous lightening at night including removal of old cat eye / studs complete all as specified and directed. Make - SUN EYEZ Road Safety Products /3M/ M/s Oscar road safety/Dark eye.

M&L for marking lines, dashes, arrows, letters etc. not exceeding 15cm wide on bituminous surfaces, with retro reflective thermoplastic road marking paint with reflector sing glass beads @ 250 gms per Sqm area conforming to MOST & BIS specification, not less than 2.5 mm thick of white/ golden/ yellow as approved colour/ shade and applied with machine, as per manufacturer's instructions including preparation of surface i.e cleaning of surface by removing all dust, dirt, oil grease etc complete all as specified and as directed.

Bharadwaj Builders

KAILASH CHANDRA KHANDELWAL