SPECIAL REPAIRS TO BLDG NO VII 2 PROVN OF 01 X SEPTIC TANK BLDG NO VII JCOS SINGLE LIVING ACCN AT MANDIR VIEW OF MRC WELLINGTON AND SPECIAL REPAIRS TO BLDG NO H 3 OF DENTAL SURGERY WAITING ROOM AT MDC UNDER GE WELLINGTON

Amount

Dismanting of single layer Mangalore pattern tiles or similar pattern tiles as in roofing complete all as specified and directed.

Dismantling battens for tiles, shingles etc, of any size including tilting fillets spaced exceeding 15cm C/C complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern of roof coverings complete all as specified and directed.

Dismantling of timber scantling 40 sqcm and over in sections in any position (unframed work) complete all as specified and directed.

Second class hardwood as in scantling (purlins/rafters etc.,) clean swan, fixed to timber frame work complete all as specified and directed

Galvanised, corrugated mild steel sheeting 0.63mm with two corrugation side lap fixed with coach screw and washers, in roofs walls etc. with grade of zinc coating 275 complete all as specified and directed.

All as per Item No 6 here-in-before but except sheets. Note: The dismantled sheet be re-used as directed by Engineer-in-Charge.

Second class hard wood clean sawn batten for MP tiles exceeding 5sq.cm and not exceeding 15sq.cm in sectional area at 30cm centres complete all as specified and directed.

Fixing only of second class hard wood clean sawn batten for MP tiles exceeding 5sq.cm and not exceeding 15sq.cm in sectional area at 30cm centres complete all as specified and directed. Note: The batten dismantled shall be re-used as directed by Engr-In-Charge.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

Pre- painted galvalume aluminum zinc coating GI based Plain steel sheet as in ridge of 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering and on chajjas fixed with self tapping screws all as specified and directed.

Dismantling of wall/ ceiling boards (fibre, pulp, insulation, etc) or insulation boards/ slabs/ blankets, any thickness, including cover fillets and frame work complete all as specified and directed.

GI frame work for frame size 605mm x 605mm seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20mm and 30mm and web of 27mm fixed surrounding walls using Nylon sleeves and screws at 450mm c/c intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm c/c with GI cleat and section (not exceeding 1.2mtr length) of 0.55mm thickness having kurled web web of 50mm of and flange of 26mm each with lips of 10.5mm fixed to intermediate channel with connection clips across the intermediate channel at 457mm c/c complete all as specified and directed.

S&F of 12 mm thick Gypsum Board as in ceiling fixed with screws as per manufacturers instructions complete all as specified and as directed.

M&L for applying two coats of distemper oil emulsion on ceilings over priming surfaces with alkali resistant priming paint over 2mm thick one coat in two layers of putty including preparation of surfaces complete all as specified and directed.

Demolition of Brickwork, stone / boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Pre-cast cement concrete block masnory type C1 1:3:6 using 20mm graded stone aggregate with solid block exceeding 10cm in width and setting in mortar 1:6 complete all as specified and directed

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 and pointing the dressed surface with same mortar as the work proceeds all as specified and directed.

Extra over stone walling for Granite or Trap stone for Hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought up to courses with maximum depression on face from straight edge held against the dressed surface not exceeding 40mm all as specified and directed.

M&L for keyed pointing to random or polygonal rubble masonry uncoursed or brought upto courses in cement mortar (1:4) all as specified and as directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc ,complete all as specified and as directed

M&L for rendering 15mm thick on stone masonry surfaces in cement mortar 1:4 finished even and smooth without using extra cement all as specified and as directed.

M&L for rendering 15mm thick on stone masonry surfaces in cement mortar 1:6 finished even and smooth without using extra cement all as specified and as directed.

M&L for applying two coats of white wash on plastered or unplastered of new wall surfaces including preparation of surface complete all as specified and as directed.

M&L for applying two coats of white wash on plastered or unplastered of old wall surfaces including preparation of surface complete all as specified and as directed.

M&L for preparing the new plastered surface of wall and applying two coats of Exterior emulsion (Anti Fungal) Apex ultima paint of Asian paints or of equivalent in shalimar paints / Berger paint as approved by GE, white or tinted over a coat of primer overa coat of external wall care putty complete all as specified and directed.

M&L for preperation of new or old/ untreated wooden surfaces and applying two coats of creosote oiling over wooden surfaces complete all as specified and as directed.

Dismantling of Wrought Iron or Mild steel work of any description not otherwise provided for such as fencing posts, gates etc., and removing complete all as specified and directed.

S&F of Mild steel works in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, anglechannel or flat section) including distance pieces, cleats etc.of grade Fe-410-W (Gde-E-250) quality-A complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description over 10cm width or girth and applying two coats coat of synthetic enamel paint overa coat of red oxide zinc chrome primercomplete all as specified and directed.

M&L for preparation of old painted steel surfaces and steel based materials of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Demolition of Concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 40mm thick PCC type - B1 1:2:4 using 20mm graded stone aggregate complete all as specified and as directed.

M&L for Polished machine cut kota stone slab flooring/Cills 20-25mm thick over and including 15mm thick cement screed base in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to achieve mirror finish, complete all as specified and directed.

M&L for Polished machine cut kota stone slab 20-25mm thickas in riser of steps, skirting, dado and pillars over and including 10mm thick cement plaster in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to achieve mirror finish, complete all as specified and directed.

Taking down chowkat or frame with shutter (without taking of shutters from the frames) area not exceeding 1.5 Sq mtr each complete all as specified and directed.

Taking down chowkat or frame with shutter (without taking of shutters from the frames) area exceeding 1.5 Sq mtr but not exceeding 4 Sqm each complete all as specified and directed.

Taking down shutters of any decription area exceeding 1 sqm but not exceeding 2 sqm each complete all as specified and as directed.

S&F 2nd class hard (sal / Hollock) wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue, pinned at joints complete all as specified and as directed.

S&F 2nd class hard wood glazed and skeleton, shutter, divided into squares to receive glass, gauge etc (with sash bar) with plain chamfered or rounded, mitred and rebated sash bars, any numbers the size of member of shutter as specified in SSR Pt-I clause 8.24 (b) window and ventilaters shutters thickness 30mm and fitted to chowkat complete all as specified and as directed.

S&F for 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, covered with decorative face veneers with lipping/frame on one faces, complete all as specified and directed.

M&L for preparation of new or previously untreated wooden surfaces of any description over 10cm width or girth and applying two coats coat of synthetic enamel paint overa coat of pink primercomplete all as specified and directed.

S&F of mild steel work as in hold fasts etc conforming to (Fe- 290 gde - 165) complete all as specified and as directed.

M&L for plain cement concrete (1:3:6) type C1 using 20 mm graded stone aggregate as in bed blocks for hold fast and the like of any description including necessary form work complete all as specified and directed.

S&F of Mild steel butt hinges medium weight cold rolled and fixed 100mm long all as specified and as directed.

S&F of 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F of 150 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F of aluminium handles, fabricated type, anodised extruded section 150 mm long complete all as specified and directed.

M&L for floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor over all length of cover plate 150mm fixed in repairs complete all as specified and directed.

S&f for 4 mm thick sheet glass ordinary quality and glazing with oil putty and beads in squares not exceeding 0.5 sqm in each pane all as specified and directed.

S&F 0.56mm thick plain, aluminium sheeting, alloy 31000 H4 as in ridges, hips, valley gutters, drip and stright flashing (length and girth as fixed) fixed to wooden doors complete all as specified and as directed.

M&L for plain cement concrete type C-1, 1:3:6 using 20mm graded stone aggregate as in plinth protection 75mm thick and hardstanding including necessary form work finished even and fair complete all as specified and directed.

Dismantling of boarding of any description fixed in any position with nails or screws complete all as specified and as directed.

M&L for IInd class hardwood decorative weather boarding, wrought, thickness 20mm to 25mm and rebated on thick edge to give 20mm laps and fixe complete all as specified and as directed.

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10sq m on plan and getting out in soft / loose soil complete all as speicified and as directed.

Removal of excavated materials exceeding 250m not exceeding 500m and depositing where directed at a level not exceeding 1.5m above the starting pont etc complete all as specified and as directed.

M&L for racking out joints and pointing to random rubble or polygonal rubble uncoursed or brought up to courses work in old stone wall in Cm 1:4 complete all as specified and as directed.

M&L for preparing the old treated/untreated plastered surface of wall (stone/brick) and applying two coats of Exterior emulsion (Anti Fungal) Apex ultima paint of Asian paints or of equivalent in shalimar paints / Berger paint as approved by GE, white or tinted complete all as specified and directed. Note : Quoted rate shall be deemed to be inclusive of scaffolding for a height up to 10mtr of building.

Solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, fixed in opening as per specification complete all as specified and directed.

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the styles & rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed.

S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc., complete all as specified and as directed.

S&F anodised aluminium door shutters including powder coated, aluminium section weighing 0.55kg/mtr including necessary joining cleats, glazing clips, rubber neoprene packing, handles - 2 Nos in each door, hinges, anodised aluminium snap beading, screws, etc., complete all as specified and as directed.

S&F factory made UPVC white colour sliding window three track, area not exceeding 2 sqm each window made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow section with multi chamber frame (88mm x 52mm), sliding sash (42mm x 67mm), sliding mesh sash (42mm x 57mm) sliding interlock ( One vertical length in each shutters) (45.5mm x 28mm), glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing hardware, EPDM gasket, 1.2mm (+- 0.2mm) thick galvanised steel frame (30mm x 18mm) 2 Nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, hardware (touch lock of zinc alloyed (white powder coated), steel roller system, Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and as directed. Note : the unit rate quoted by the contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured dor payment purpose.

S&F fixed glass/louvers type ventilators using 5mm thick frosted glass and following aluminium powder coated sections conforming to catalogue of "JINDAL" or of equivalent make and rubber beading etc., (a) SP - 20048, (b) Glazing clips - 19352 complete all as specified and as directed.

M&L for kitchen and Cupboard Shutter/Cabinet Carcase of required sizes made out of MDF board 18mm thick one side decorative lamination & other side balancing lamination. finished at all level all as per the Manufacturers Instructions complete all as specified and directed. Make: Action Tesa or equivalent

S&F stainless steel auto closing hinges of suitable size required for fixing of cabinet shutters complete as per Engr-in-charge directions and manufacturer's instructions. Make : EBCO or equivalent.

S&F for 100mm Stainless steel handle rectangular shape polished bright complete all as specified and as directed. Make : EBCO or equivalent.

S&F for 12mm thick prelaminated particle board, interior grade, prelaminated on both side decorative choice lamination fixed in aluminium door shutter frames complete all as specified and as directed.

S&F in repair door closer hydraulically regulated aluminium extruded section body designation No.1 universal type, suitable for door shutters up to 700mm in width and of weight not more than 35Kg and fixed complete all as specified and as directed.

M&L for Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm nd fixed with tinned or galvanised wire staple all as specified and directed.

M&L for Fancy type decorative drapery rod aluminium powder coated 20 mm dia including side caps and brackets, as in repairs complete all as specified and directed.

Dismantling, floor hearth or wall tiling including cement mortar bedding complete all as specified and as directed.

M&L for Coloured Glazed ceramic tiles in vertical surfaces 450x350x7mm/ 300x600x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick plaster in cement mortar 1:4 on fair face of brick or concrete surface complete all as specified and as directed.

M&L for 25mm thick PCC type - B1 1:2:4 using 20mm graded stone aggregate as in flooring complete all as specified and as directed.

Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match the surface over and including 15mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete all as specified and as directed.

Vetrified tiles 10mm thick (square/ rectangular) area of each not exceeding 0.36 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match the surface over and including 15mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete all as specified and as directed.

Vetrified tiles 10mm thick (square/ rectangular) area of each not exceeding 0.36 sqm, as in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match the surface over and including 10mm thick plaster in cement mortar 1:4 complete all as specified and as directed.

M&L for 20mm thick granite work of any type, (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms, stotage racks etc., and the like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L for screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement plaster 1:4 complete all as specified and as directed.

M&L for rendering 10mm thick on fair faces of brickwork or concrete surfaces in CM 1:4 complete all as specified and as directed.

M&L for rounding edges of stone slabs one edge, such as steps, cooking platforms and other similar situations, complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick masonry/concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement all as specified and as directed.

Supply only liquid water proofing compound complete all as specified and as directed.

Complete removal of existing treatment of wall surface and applying one coat of primer (water thinable/ solvent thinable) over and including one coat putty in two layers of 3mm thick even and smooth and applying two coats of oil bound emulsion distemper (washable) complete all as specified and directed.

Complete removal of existing treatment of ceiling surface and applying one coat of primer making surface even and smooth and applying two coats of oil bound emulsion distemper (washable) complete all as specified and directed.

S&F of floor mounted coupled water closet of size 380 x 660 x 765mm with flushing cistern, with UV soft close seat cover, hinges, fixing accessories set including S trap complete all as specified and as directed. Make : Cat No. LYS-WHT-38751S & LYS-WHT-38201 of Jaquar or techno-commercially Equivalent.

S&F Vitreous China Wash down water closet pan (Pedestal pattern), white with P or S trap including flushing pipe, seat cover (white) closed pattern with flat bottom & cover brass chromium plated hinging device, including connection to drain and to flushing pipe, antisyphonage pipe etc., fixed in repairs complete all as specified and directed.

S&F of PVC valveless, syphonic action type, low level flushing cistern, 10 litres capacity, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repairs vitreous china wash hand basin, white, flat back of size 550 x 400mm including brackets, cutting for and pinning in ends of brackets or erecting stand, with and including brass chromium plated perforated waste coupling/fittings 32mm dia with long screwed shanks and fly nuts, flangs end bedded in red lead cement and other end fixed, pvc waste pipe of 32mm dia and of suitable length, 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated, fancy type, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and PVC connection 15mm bore with PTMT nuts of 450mm long and fixed complete all as specified and as directed.

S&F in repairs table top basin of size 485 x 395 x 150mm including waste coupling and waste pipe complete all as specified and as directed. Make : Cat No. JDS-WHT-25909 of Jaquar or techno-commercially equivalent.

S&F of Long body bib tap fancy type Chormium plated fixed to 15mm dia in repairs,complete all as specified and as directed. Make :- Cat No. CON-107KN of Jaquar or techno-commercially equivalent

S&F Chroumium plated fancy type 2in1 bib tap fixed with existing pipe including fixed in repair all as speicified and as directed Make : Cat No. CON-141KN of Jaquar or techno-commercially equivalent

M&L for Soap dispenser, brass,chromium plated with metalic bottle complete fixed in repairs all as specified and directed.

S&F in repairs towel rack brass chromium plated 600mm long with lower hangers as in bathrooms complete all as specified and as directed.

S&F in repairs CP toilet paperroll holder complete all as specified and as directed.

S&F in repairs tubular towel rail 20mm dia, D type brass chromium plated 60cm long complete all as specified and as directed.

S&F in repair angular stop cock with wall flange for 15mm dia of chromium plated fancy type complete all as specified and as directed. Make : Cat No. CON-059KN of Jaquar or techno-commercially equivalent

S&F in repaire Bib tap fancy type chromium plated fixed to 15mm dia pipe complete all as specified and as directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repairs soap dish complete chromium plated complete all as specified and directed. Make: Cat No. ACN-1131N of Jaquar or techno-commercially equivalent

S&F PVC (SWR) floor/nahani trap, plain with grating including jointing to waste pipe with solvent cement, dia of outlet 75mm complete all as specified and as directed.

S&F in repairs Health faucet with 8mm dia, 1m long flexible tube and wall hook with back flow preventer complete all as specified and directed. Make : CAT No ALD-577 of Jaquar or techno-commercially equivalent

S&F in repairs hand shower 120mm dia round shape multi flow with cascade effected rubit cleaning system complete all as specified and as directed. Make : CAT No HSH-1731 of Jaquar or techno-commercially equivalent

Taking up or down steel tubing and connections including cleaning for refixing or removal to store of size 15mm dia complete all as specified and directed

Taking up or down steel tubing and connections including cleaning for refixing or removal to store of size 20mm dia complete all as specified and directed

Supply, laying and testing steel water tubing medium grade galvanized with all GI fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor including cutting and chasing and making good with all fitttings (such as bends, elbows, tees, couplings, sockets, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.,) complete all as specified of size 15 mm bore.

Supply, laying and testing steel water tubing medium grade galvanized with all GI fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor including cutting and chasing and making good with all fitttings (such as bends, elbows, tees, couplings, sockets, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.,) complete all as specified of size 15 mm bore.

S&f Ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and of size 20mm dia complete (Minimum weight 215 - 455gms gms) complete all as specified and directed.

S&F in repairs gun metal gate/globe valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

Dismantling of PVC water tank exc 250 Ltrs but not exc 500 Ltrs capacity from existing position and removing to store complete all as specified and directed.

S&F of Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layers of capacity 1000 Ltrs hoisted and fixed in position with proper inlet and outlet connections complete all as specified and directed.

Demolition and breaking up drain pipes of any description of any size complete all as specifieed and as directed.

M&L for PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

M&L for PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

M&L for PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and as directed.

M&L for PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and as directed.

M&L for PVC (SWR) bends 110mm any radius, complete all as specified and as directed.

M&L for PVC (SWR) bends 75mm any radius, complete all as specified and as directed.

M&L for PVC (SWR) bends 110mm any radius, with access door complete all as specified and as directed.

M&L for PVC (SWR) bends 75mm any radius, with access door complete all as specified and as directed.

M&L for PVC (SWR) cowl 75mm bore of pipe complete all as specified and as directed.

M&L for PVC (SWR) cowl 110mm bore of pipe complete all as specified and as directed.

M&L for 75mm thick Cement concrete type C1, 1:3:6 (using 20mm graded stone aggregate as in plinth protection and hard standing finished even and fair complete all as specified and as directed.

M&L for cutting into existing manhole for connecting new drain pipes of 100mm internal dia, making good to pipes and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type - B1 smooth finished, and reforming benching as required complete all as specified and as directed.

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10sq m on plan and getting out in any type of soil complete all as speicified and as directed.

Returning, filling in excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick each, complete all as specified and directed

Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar, internal dia of pipe 150mm complete all as specifieed and as directed.

M&L for concrete bed to 150mm/ 160mm bore drain pipes in PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) including packing under and haunching against the side of pipes after they are laid and tested complete all as specified and directed.

M&L for PCC 1:4:8 type - D2 (using 40mm gradedstone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

M&L for 75mm thick plain cement concrete 1;4;8 type - D2 (using 40mm graded stone aggregate) as in subbbase of flooring including necessary formwork complete all as specified and as directed.

S&F chequered cement concrete colour tile of size 30cm x 30cm x20-22mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors, steps etc., over and including 20mm thick screed bed in Cement mortar 1:4 complete all as specified and as directed.

Excavation over areas, not exceeding 1.5m deep and getting out in hard / dense soil complete all as specified and directed. (For septic tank)

Excavation over areas, exceeding 1.5m deep but not exceeding 3.0m deep and getting out in hard / dense soil complete all as specified and directed. (For septic tank)

M&L for SGSW drain pipes of 150mm bore internal dia of pipe laid in trenches and jointed complete all as specified and as directed.

Mild steel TMT bars 6 to 8mm dia and over cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.90mm dia or securing with clips all as specified and directed.

M&L for rendering 15mm thick on fair faces of brickwork or concrete surfaces even and smooth (without using extra cement) in CM 1:4 complete all as specified and as directed.

M&L for RCC M-25 (using 20mm graded stone aggretgate) as in slabs supported on walls, beams and columns as in floors, roofs, balconies, canopies, decj slabs and in shelves etc., complete all as specified and as directed.

M&L for formwork to edges of concrete slabs as in roofs, walls and floor of width not exceeding 20cm complete all as specified and as directed.

Mild steel TMT bars 10mm dia and over cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.90mm dia or securing with clips all as specified and directed.

M&L for loose filing with aggregate-of gauge 80 to 150mm in soakage pits/wells with broken bricks complete all as specified and as directed.

Taking down aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell etc, and making good disturbed surfaces with smooth finish matching with the existing surface of walls, floors, etc. and with existing colour all as specified and directed.

M&L for point wiring complete with FRLS PVC insulated and unsheathed cable with 1.5 Sqmm (nominal area) copper conductor single core multistrand 1100 volt grade conforming to IS 694 drawn through PVC casing and caping complete with fittings/accessories with provn of 1.2mm thick MS/PVC terminal boxes of suitable size, flush box covered with 3mm thick plastic laminated sheet top cover for housing of switches, sockets etc surface mounted on wall and 1.5 Sqmm copper conductor as earth continuity to connecting common earth dolly complete for One light point controlled by one Way switch 5/6 Amps complete all as specified and directed.

All as per Item No 145 hereinbefore but one 3 pin 5 Amps switch socket outlet point on independent board control with one switch complete all as specified and directed.

All as per Item No 145 hereinbefore but one 3 pin 5 Amps switch socket outlet point on same board control with one switch complete all as specified and directed.

All as per Item No 145 hereinbefore but point wiring with 2.5 Sqmm for 5/15 Amps socket on independent board complete all as specified and directed.

All as per Item No 145 hereinbefore but point wiring with 4 Sqmm for 3 pin 15 Amps socket outlet on independent board including 4 Sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor complete all as specified and directed.

M&L for point wiring complete with FRLS PVC insulated and unsheathed cable with 1.5 Sqmm (nominal area) copper conductor single core multistrand 1100 volt grade conforming to IS 694 drawn through PVC conduit medium grade in concealed complete with conduit fittings/accessories including 1.5 Sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor and connected to common earth dolly for One light point controlled by one Way switch 5/6 Amps complete all as specified and directed. Note : (i) Sunken box/Cover plate/modular plate for modular switches, sockets etc., will be measured and paid seperately under relevant items and blank plate required if any will be deemed included in the item rate. (ii) Cutting chases in brick/stone masonry wall will be measured and paid seperately.

All as per Item No 150 hereinbefore but one 3 pin 5 Amps switch socket outlet point on independent board control with one switch complete all as specified and directed.

All as per Item No 150 hereinbefore but one 3 pin 5 Amps switch socket outlet point on same board control with one switch complete all as specified and directed.

All as per Item No 150 hereinbefore but point wiring complete with 2.5 Sqmm for 3 pin 15 Amps socket outlet on independent board including 2.5 Sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor complete all as specified and directed.

M&L for Lamp holder, PVC/ Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and directed.

M&L for Ceiling rose, 3 terminals PVC / polycarbonate, isolated body complete all as specified and directed.

M&L for Modular switch one way 6A 230V AC 50 HZ SP one module complete all as specified and directed.

M&L for Modular switch one way 16A 230V AC 50 HZ SP one module complete all as specified and directed.

M&L for Modular socket 2/3 pin combined 6A 230V AC 50 HZ SP two module complete all as specified and directed.

M&L for Modular socket 6A/16A 2/3 pin combined 230V AC 50 HZ SP two module complete all as specified and directed.

Taking down unserviceable DBs with MCBs and Supply and fix MCB DB SPN 8 way 230 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works complete all as specified and directed. Make: ABB/ Legrand/ L&T.

All as per Item No 160 hereinbefore but 4 way

S&F 240V, 10 KA 'C' curve miniature circuit breaker (MCB) SP and current carrying capacity 20 Amps in the MCB DB complete with connection, testing and commissioning complet all as specified and as directed. Make: ABB/ Legrand/ L&T.

All as per Item No 162 hereinbefore but SPN 240V, 40 Amps capacity complete all as specified and as directed.

Supply and fix 10W LED lamp, B-22, 5 star lamp, lumen 1200 & 6000K holder type complete all as specified and directed. Make Havells Cat Part No-LHLDEUEBML8Z010 or Equivalent in Phillps/ CG/Surya/Crompton/Bajaj

Taking down old unsv FTL fittings, Supply and fix 22W LED 125 Lum/Watts 4ft batten comprises of thermally conductive material pre-wired with high efficiency electronic driver, high translucent serrated milky white diffuser gets glare free, smooth light distribution lamp colour white complete all as specified and directed. Make. Havells Cat Part No. LHEXBLP7PN1W022 or Equivalent in CG/ Philips / Bajaj/Surya.

Taking down old unsv light fittings at any height, supply and fix energy saving, environment friendly & robust IP-65 protected LED 60 Watts mid bay with PDC housing suitable for ceiling (Surface/Suspended) mount & available in necessary connections complete all as specified and directed. Make. Havells Cat Part No. ILIOSBAYLEHBP60WLED857SP90DTOPC or Equivalent in CG/ Philips / Bajaj/Surya.

Taking down unserviceable building security light and Material and labour for LED Security Light fitting of 20 Watt comprising of epoxy powder coated housing enclosed with glass cover in frame with protection IP 65 complete with all accessories and lamp colour white all as specified and directed. Make: CG or equivalent in Phillips/ Bajaj/Surya/CG

M&L for GI Pipe Medium Grade 40 mm bore bracket of suitable size bent to shape of not less than 1.2m long with clamp made of GI flat Iron of size 32 x 6mm for building security light fittings, street light fittings, duly painted with one coat of red oxide primer and two coats of aluminium based paint, fixed on poles with bolts, nuts and washers complete all as specified and directed.

Taking down Submain wiring with aluminium conductor along with PVC Conduit and Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 4 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 4 Sqmm drawn through and including PVC Conduit pipe 20 mm dia with all fittings all as specified and directed. Note: 3 runs of cable and one run of conduit pipe together measured as one RM

Taking down Submain wiring with aluminium conductor along with PVC Conduit and Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 6 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 6 Sqmm drawn through and including PVC Conduit pipe 20 mm dia with all fittings all as specified and directed. Note: 3 runs of cable and one run of conduit pipe together measured as one RM

MEL for Earthing complete with galvanized steel earth plate electrode 60 cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the platee not less than 1.5 mtr below normal ground level, connected to galvanized earth wire of size 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 connected to earth testing point including necessary excavation, earth work, PCC pit ,RCC cover 1:2:4 type - B1 with 8 mm dia MS bars at 100 c/c , funnel ,watering pipe etc. complete all specified and directed including testing on completion.

M&L for cutting in brick/stone masonry wall/concrete floor/roof for laying PVC conduit and making good to facings where required and pointing in cement mortar 1:3 and making good, cutting not exc 10cm girth complete all as specified and as directed.

Taking down old unserviceable exhaust fan of any size & type, supply and fix exhaust fan steel body AC single phase, 230V of size 380mm sweep with blades and frame and louvers including making opening I the brick/stone masonry wall as per manufacturer's instructions/requirement of Exhaust fan and making good to match with existing surfaces complete all as specified and as directed.

All as per Item No 150 hereinbefore but point wiring complete with 4 Sqmm for 3 pin 15 Amps socket outlet on independent board including 4 Sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor complete all as specified and directed.

M&L for Frame plate with matching cover for two module plate complete all as specified and directed.

M&L for Frame plate with matching cover for three module plate complete all as specified and directed.

M&L for Frame plate with matching cover for four module plate complete all as specified and directed.

S&F of LED 20W battenin extruded aluminium housing with diffuser complete all as specified and as directed.

S&F of LED luminare 600mm x 600mm, 30 Watt, 220V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.

S&F of rigid non-metallic PVC conduit of size 20mm dia, concealed, inclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows,reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe etc for TV cable complete all as specified and directed.

Supply and fix in replacement of modular TV socket Co-axial complete all as specified and as directed.

Taking down unserviceable DBs with MCBs and Supply and fix MCB DB SPN 4 way 415 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works complete all as specified and directed. Make: ABB/ Legrand/ L&T.

Supply and fix 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning all as specified and directed. Make: ABB/ Legrand/ L&T.

Supply and fix 415V, miniature circuit breaker (MCB) of Triple poles and neutral current carrying capacity 63 AMP, in the MCB DB Complete with connection testing and commissioning all as specified and directed. Make: ABB/ Legrand/ L&T.

P K ENTERPRISES

VVM CONSTRUCTIONS

K.AYYAPPAN