Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.4 LAccepted-AOC BIDHAN PALLY OODLABARI P O MANABARI P S MALBAZAR DIST JALPAIGURI | JALPAIGURI | L1 | Accepted-AOC AOC | |
| 2 | L2₹34.9 L+₹27,599.03 (0.80%)Rejected-Finance C O UTTAM BANIK HAIDERPARA OPPOSITE TO WEST BENGAL REPRESENTATIVE REST HOUSE P O HAIDERPARA SILIGURI 06 | JALPAIGURI | WEST BENGAL | 734006 | L2 | Rejected-Finance Not lowest | |
| 3 | L3₹35.6 L+₹95,407.95 (2.75%)Rejected-Finance SHATYAM APPARTMENT 35 BALAI DAS CHATTERJEE ROAD HAKIMPARA SILIGURI 1 | JALPAIGURI | WEST BENGAL | 734001 | L3 | Rejected-Finance Not lowest | |
| 4 | L4₹36.6 L+₹2.0 L (5.69%)Rejected-Finance | L4 | Rejected-Finance Not lowest |
Tender Value
₹38 L
EMD Value
₹76,000
Closing Date
7 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SEVOKE ROAD
GE Sevoke Road Post Salugara Dist Jalpaiguri PIN 734008
PROVN OF CERTAIN REVENUE AND MINOR WORK AT BAGRAKOTE STN UNDER GE SEVOKE ROAD
2022_MES_544095_1
GE/SEV/23 of 2022-23
Open Tender
Civil Works
Item Rate
180 days
GE SEVOKE ROAD
As per Tender Documents
8 documents required · 8 mandatory
₹500
Yes
GE SEVOKE ROAD
₹76,000
Yes
23 Sept 2022
8 Aug 2022
9 Sept 2022
8 Aug 2022
7 Sept 2022
24 Aug 2022
9 Aug 2022 - 18 Aug 2022
Amount
Excavating in trenches not exc 1.50m wide and n.exc 1.50m in depth in hard/dense soil and getting out complete all as specified and as directed.
M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete etc complete all as specified and as directed.
M&L for brick work with fly ash bricks straight or curved on plan exc. 6mtr mean radius, built in cement mortar 1:6, complete all as specified and directed.
M&L for Brick work with fly ash bricks as in half brick thick wall built in CM (1:4), complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.
M&L for moorum/red bajri filling in floor or paving laid in layers n exc 15 cm thick spread levelled and blinded with earth and rammed including watering complete all as specified and as directed.
M&L hardcore of broken stone or boulders of gauge not exceeding 63/100 mm deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded mechanically crushed stone aggregate) as sub base of flooring complete all as specified and directed.
M&L for 50mm thick PCC (1:4:8) type D-2 (using 40mm graded mechanically crushed stone aggregate) as sub base of flooring complete all as specified and directed.
M&L for 40mm thick PCC (1:2:4) type B0(using 12.50mm graded crushed stone aggregate) as in DPC to horizontal or verticle surfaces including necessary formwork complete all as specified and directed.
M&L RCC 1:2:4 , type B1, using 20mm graded crushed stone aggregate as in lintels upto 1.5m clear span and lintel band, roof band and other similar items including form work complete all as specified and directed.
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required incuding cranking, bending spirally for hooping for columns, hooking ends and binding with and incuding mild steel wire (annealed), not less than 0.9mm dia or securing with clips complete all as specified.
All as per item No.13 above but 5 mm dia and over up to and including 10 mm dia as in stirrups, spacers and binders complete all as specified and as directed.
S&F rolled mild steel Roof trusses (framed), trussed, purlins, crane, gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc( Fe 410-W Gde-E-250) quality A Including preparation of surface and one shop coat of zinc chromate primer at contractors workshop before fabrication complete all as specified and directed by Engineer-in-Charge..
S&F Steel ventilators with top hung shutter including hinges,steel peg stay, and including one coat of red oxide primer complete all as specified and directed.
S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, including one coat of red oxide primer complete with glazing bars, dovetailed or welded complete all as specified and directed.
All as per item No 17 above , but without glazing bars complete all as specified..
S&F mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.
S&F 3mm thick glass sheet ordinary quality & glazing with oil putty in square not exc 0.50 Sqm in each pane all as specified & directed.
S&F mild steel screw bolts, 5 to 10mm dia machine made with hexagonal head at one end screwed the other or screwed both end, each screwed end to be fitted with washer and one hexagonal or square nut exceeding 05cm and not exceeding 10cm long complete all as specified.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self drilling and self tapping screws, neoprene and limpet washers complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self drilling and self tapping screws, neoprene and limpet washers complete all as specified and directed.
S&F mild steel flat iron for security fencing post or wind ties including drilling holes for securing bolts and fixed with bolts and nuts etc and similar work conforming to Fe-290.Gde-E-165, complete all as specified and as directed.
M&L for rendering 20mm thick on fair faces of brick work or concrete surfaces in CM 1:4 including mixing WPC as per manufacturers instruction, finished even and smooth without using extra cement complete all as specified and as directed. Note : WPC shall be measured seperately.
M&L rendering 15mm thick in CM 1: 6 on fair faces of brick/concrete surfaces finished even & smooth without using extra cement complete all as specified and as directed.
Supply only liquid water proofing compound complete all as specified and as directed.
M&L for rendering in CM (1:4), 10mm thick on fair faces of brick work or concrete surfaces for fixing of wall tiles complete all as specified and as directed.
M&L for glazed ceramic coloured tiles on vertical surface 300X450X7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces complete all as specified and as directed.
M&L for screed bed or bedding layer of cement mortar 1:6, 15mm thick for laying floor finishes complete all as specified and as directed.
M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces complete all as specified and as directed.
M&L 75mm thick cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection & paving finished even & smooth without using extra cement complete all as specified and as directed.
M&L for mild steel round bars, 6 mm dia, conforming to Fe 410W , qualioty A of Fe 290 as in reinforcement to half brick wall (two Nos in every fourth course of half brick wall) complete all as specified and as directed.
S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour prelam PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. Square tube, supplying and fixing in opening as per specification & drawing complete all as specified and directed.
S&F Factory made solid panel PVC prelaminated coloured Door Shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelam PVC sheets stile & rails having one side feathered edge and on other side 10 mm 90 bent dege for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.
S&F stainless steel butt hinges medium weight cold rolled of size 100mm complete all as specified and directed.
S&F aluminium anodised handles of 100mm size, fabricated type of extruded section fixed with screws to shutters, complete all as specified and directed.
S&F aluminium anodised barrel tower bolts of extruded section, 150mm long, complete all as specified and directed.
S&F 605X605mm anodised aluminium snap grid frame work for false ceiling including 2.5mm dia mild steel wire galvanized class 3, @ 60cm centre to entre and fixed to steel or wooden member including 4mm thick non asbestos fibre cement boards fixed or laid/ inserted to aluminium frame work as in ceiling complete all as specified and directed. Note:- The size of aluminium main and croos tee shall be 40mm x25mm x2mm and size of angle shall be 25mm x 25mm x 2mm)
M&L Preparing of new non AC board surfaces and applying three coats of white wash on ceiling complete all as specified.
S&F (EWC) Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) incl all fittings complete and fixing to flush pipe and outlet pipe complete all as specified and as directed
S&F 15mm bore CP Toilet Hand Pressed Nozzle (Heath faucet) with 1.25 meter long tube with CP wall bracket complete all as specified and as directed.
S&F two way bib cock with wall flange chromium plated with crutch or butterfly handle screwed down screwed for iron pipe 15 mm bore and fixed complete all as specified and as directed.
Supply only flushing cistern, 10 Ltrs. Capacity, PVC valveless, syphonic action type with dual flushing system, low level,white with inlet, ball valve,float and handle including brackets and flush pipe of polyethylene PVC 32mm dia, complete all as specified and directed.
S&F PVC connection pipe 15 mm dia, 450 mm long with PTMT nut complete all as specified and as directed
S&F 15 mm dia GI pipe medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all as specified.
S& F 15 mm bore bib tap cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe complete all as specified and directed.
S& F 15 mm bore angle stop valve cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe complete all as specified and directed.
S&F waste coupling 40 mm dia pipe PTMT (hallf or full threaded ) (minimumweight 32mm-45gms) suitable for urinal complete all as specified and as directed
Preparation of newly plastered surfaces and applying three coats of white wash on walls complete all as specified and as directed
M&L for preparation new steel surfaces of any description over 10cm width of grith and applying two coat of synthetic enamel paint complete all as specified and directed.
S&F PVC (SWR) floor trap dia of outlet 75mm, plain with grating including jointing with solvent cement complete all as specified and as directed.
S& F Vitreous China urinal , half stall type (back or corner wall type) complete including providing and fixing plugs urinal against wall in cement mortar 1:2 , securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement , fixing automatic flushing cistern with brackets, flush pipe, grating and union fo dischage pipe complete all as specified and as directed. (exclusive of fixing supply pipe to flushing cistern , trap and waste pipe)
S&F 15 mm dia pipe urinal spreader of PTMT any colour (minimumweight 60gms) complete all as specified and as directed
S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified & directed.
S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified & directed.
S & F 110 mm bore PVC (SWR) branch piece single (Single `T') equal or unequal with access door complete all as specified & directed.
S & F 75mm bore PVC (SWR) branch piece single (Single `T') equal or unequal with access door complete all as specified & directed.
S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed
S & F 75 mm bore PVC (SWR) Vent cowl complete all as specified & directed
S & F 110 mm bore PVC (SWR) bends, diminshing pieces, tapers complete all as specified & directed
S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed
M&L for cement concrete 1:4:8 type D-2 Concrete bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested; 110mm bore pipes complete all as specified and directed.
S&F Vitreous China wash hand basins, white, flat back, size 550x400mm excluding taps, waste but including brackets complete all as specified and directed.
Supply only 32 mm waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement & other end fixed complete all as specified and as directed.
S&F 32mm bore high density polyethylene pipes (LDPE) of pressure rating 6 Kgf / cm2, fixed to walls, ceiling or laid in floors etc, complete all as specified and directed.
S&F 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and flynuts, screwed for iron pipe and fixed complete all as specified and as directed.
Surface excavation n exc 30cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.
M&L for RCC 1:2:4 type BI (using 20 mm graded crushed stone aggregate) as in slabs supported on walls, beams and coloumn in floors, roofs, landings, balconies, conopies, deck slabs and in shelves and the like complete all as specified and as directed.
Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping for flat surface) complete all as specified and directed.
S&F 20 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all specified and directed.
S&F Rotational moulded polyethylene water storage tanks 1000 Litre capacity double layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including provision of necessay fittings for connection the overflow, drain out, inlet and outlet pipes, complete all as specified and as directed.
S&F 20 mm bore Gun metal gate or globe valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed.
S&F Ball brass valves of size 20 mm bore high pressure, with polythene float and fly nut, screwed for iron pipe etc, complete al as specified and directed.
Excavation over areas not exceeding 1.5m deep and getting out in hard/dense soil complete all as specified and as directed
All as per item No 76 above but exceeding 1.5m deep and not exc 3.0m in depth getting out in hard/dense soil complete all as specified and directed.
M&L for Sand filling under floors including watering and consolidation as in sand cushioning for interlocking paver blocks complete all as specified and directed.
S&F Modular Septic Tank of Capacity 2000 Ltrs (9-10 Users) (plastic septic tank) vertical design tank type includng all accessoried and lowering into position and fixed to inlet and outlet pipes complete all as per manufacturer instructions and directed by Engineer-in-Charge. Make:- Supreme/ Sintex Plastics/ Aqua tech.
M&L mild steel TMT bars 6 to 8 mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed, not less than 0.9mm dia or securing with clips.
All as per item No 1.00 above but depth exc 1.5m n exc 3.00 m complete all as specified and as directed.
M&L for cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete etc complete all as specified and as directed.
M&L for Brickwork with sub-class `B’ bricks, straight or curved on plan exc 6 mtr mean radius built in CM 1:4 complete all specified and directed.
M&L for brick work with sub class 'B' bricks in one brick thick honey comb walling built in cm 1:4 complete all as specified and directed.
M&L for loose filling with broken brick bats of guage 80 to 150 mm in soakge pita/soakge well complete all as specified and as diected.
S&F CI manhole cover 600 mm dia medium grade all as specified and as directed.
M&L 150mm internal dia of salt glazed stone ware drain pipes grade A laid in trenches and jointed complete all as specified and as directed.
S&F 150mm Internal Dia DWCPE pipes (SN-8) pipe ISI Marked laid in trenches and jointed complete all as specified and as directed.
Surface dressing n exc 15cm deep in hard/dense soil complete all as specified and directed.
M&L PCC 1:2:4, type B0 (using 12.5mm graded crushed stone aggregate) as in copings, kerbs and the like incl weathering, slightly rounded or chamfered angles and throating, as directed incl necessary form work as reqd complete all as specified and as directed
M&L 60mm thick Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming to IS 15658- 2006 M-35 grade, laid as directed to any shape. Complete all as specified and as directed
Excavating in post holes (or similar holes) each n exc 0.50 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25cm, watering and removing surplus soil to a distance not exc 50 m and making good surfaces in soft/loose soil complete all as specified and as directed.
S&F rolled mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment (Fe 410 W Gde-E 250) Quality A complete all as specified and as directed.
Surface dressing n exc 15cm deep in soft/loose soil complete all as specified and directed.
M&L for chequered cement concrete tiles 30cm x 30 cm x 25 mm thick (with grey cement and pigments), set, jointed and pointed in neat cement slurry in floor with grey cement mixed with pigments complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based Manglore Pattern corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self drilling and self tapping screws, neoprene and limpet washers complete all as specified and directed.
M&L for preparing new steel and iron surfaces of any description n.exc 10 cm in width or girth and apply two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above GL) complete all as specified
M&L 25mm thick cement concrete 1:2:4, type B1 (using 20mm graded crushed stone aggregated) as in sub base of flooring etc complete all as specified.
M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces complete all as specified and as directed.
Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc complete all as specified
M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces complete all as specified and as directed.
Taking down shutters of area exc 1 sqm and n exc 2 sqm each and re-fixing in the same opening after minor adjustments complete all as specified and as directed.
Preparation of old surfaces and applying one coats of white wash on walls surfaces complete all as specified and as directed
M&L 100mm thick PCC 1:4:8, type D2 (using 40mm graded crushed stone aggregated) as in sub base complete all as specified.
M&L 75mm thick PCC 1:2:4, type B1 (using 20mm graded crushed stone aggregated) as in paving/floors complete all as specified.
M&L for Continuous brick edging; with width equal to the depth of the brick, laid dry, on edge with fly ash modular bricks complete all as specified and as directed.
M&L for forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound grade 'A' thickness of slab 100 mm complete all as specified and as directed.
M&L for concealed point wiring with two single core PVC insulated, unsheathed, multistranded copper conductor FRLS of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.50 sqmm green in colour as earth lead in and including PVC rigid conduit (medium grade) with all fittings & accessories including provn of MS sunk terminal box of appropriate size suitable for switch fixed flush to wall for mounting switch, sockets, fan regulators etc with 3mm thick hylum sheet top cover with screws & cup washers for one light / fan point / call bell complete. NOTE : Cost of making good the disturbed surfaces (if any) matching with the existing surface is deemed to be included in the unit quoted rates.
S&F Switch piano flush type, single pole, one way, 5/6Amp complete all as specified and as directed.
S&F ceiling rose ,surface bakelite 65mm x 50mm size with three terminals all specified and as directed.
S&F decorative box type LED fitting 20 watt 4 feet with Al extruded batten luminaire for 230 volt AC all as directed by EIC.
S&F new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium building security light with high power LED as light source lamp type 25 w with SPD , IP-66 protection with toughened glass including fixing pipe/saddle complete all as specified and as directed.
S&F decorative box type LED fitting 09 watt 2 feet with Al extruded batten luminaire for 230 volt AC all as directed by EIC.
Supply and fixing DB with sheet metal enclouser 240 volts,04 way with rated bus bar single pole & neutral double door for MCB, including cutting chases for DB of required size and making good disturbed surface area and putting blanking plate if required including taking down old unserviceable one complete all as specified and as directed.
S&F MCB, SP, 10 KA, 230 V. "C" curve, 06-32 A , ISI marked complete all as specified and directed
S&F MCB, DP, 10 KA, 415 V. "C" curve, 06-32 A , ISI marked complete all as specified and directed
M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (in vertical position ) earth pit not less than 2.25 mtrs below normal ground level with the top edgeof the earth plate not less than 1.5 mtr (B.G.L.) & connected to galvanised iron wire 4 mm dia by means of bolts,nuts,checknuts & washer of galvanised iron including PCC (1:2:4) type B1 precast RCC cover slab with suitable handle made of 6 mm round bar, including necessary excavation & earth work in any type of soil , 20 mm dia med grade galavinised steel tube for watering with one end fixed with cast iron funnel & wire mesh, 15 mm bore light grade galvanised steel tubing up to 7.5 mtr length for drawing earth lead including common salt , charcoal in alternate layers etc. complete all as shown in EP no 3 of SSR Part 1 & testing on complection incl taking down old unsv earthing complete.
Excavation in trenches not exc 1.5 mtr in depth, and n.exc 1.5 mtr in depth for laying of pipe/cables/ Poles and getting out in soft/loose soil complete all as specified and as directed.
Supply and laying in trenches/wall LT UG XLPE insulated,armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 6 sqmm 2 core including making necessary connections all as specified and directed.
Supply & laying in trenches clear sand for cushioning under cable 8 cm below and 15 cm above complete in level all as specified and directed by Engr-in-Charge. Note:- Punned thickness shall be measured.
Supply and laying burnt clay sub class B brick as cable protection all as specified and directed.
Supply and fixing GI pipe 25mm bore medium grade for cable protection complete all as specified and as directed.
Cutting & screwing existing water pipe line mains and connection with new pipe line laid including necessary fitting required at site complete all as specified and as directed.
Supply & laying in trenches GI pipe 20mm bore medium grade including fittings in trenches/wall complete all as specified.
Supply & laying in trenches GI pipe 25mm bore medium grade including fittings in trenches/wall complete all as specified.
Supply & install test point terminal made out of GI strips 32mm x 6mmx 30cm with GI Nuts & bolts mounted on busbar insulators (02 nos) fixed on wall as directed.
M&L for air termination single pointed aluminium rod 12mm dia and 300 mm long all as specified and as directed.
M&L aluminium strip 25x3 mm with saddles and fixing screws etc for roof conductors and down conductors above ground complete all as specified and directed.
M&L for porceiline insulator suitable for fixing earthing strip to the wall/floor etc complete all as specified and directed.
S&F galvanised iron strip 32 x 6 mm burried in ground for interconnection of earthing complete all as specified and directed.
M&L for earthing with copper earth plate electrode 600 x 600 x 3.15 mm thick burried directly in ground (in vertical position) earth pit not less than 2.25 mtr below normal ground level with the top edge of the earth plate not less than 1.5 mtr (B.G.L.) and connected copper strip 20 x 3 mm earth lead by means of bolts, nuts, check nuts, and washer earth strip protected by and including GI pipe 40 mm bore (light grade ) and connected to main test point as directed and including concrete pit using PCC (1:3:6 ) type C-1, precast RCC (1:1:5:3) type A-1 cover slab of size 40x40x5 cm reinforced with 8 mm dia TMT bars @ 100mm c/c both ways with one handle for lifting made out of 8 mm dia TMT bars @ 100mm c/c both ways with one handle for lifting made out of 8 mm dia MS bar embeded in precast cove slab funel with wire mesh 20mm bore galvanised or steel pipe (light grade) for watering in including necessary excavation and earth work in any type of soil complete all as shown on electrical plate No 3 of SSR part -1 complete all as specified and directed. Note:- result of earth resistant should be less than 3 ohm.
M/s. STRUCTURES INDIA
M/S SUBRATA JOARDAR
SHRI JIBANDHAN PAUL
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .