GE 874/EWS-38/2022-23

Amount

B/R and E/M Portion

Surface dressing n.exc 15 cm deep in soft/loose soil complete all as specified and directed.

Excavation in trenches n.exc 1.5m in depth and 1.5m in width and getting out in hard'dense soil complete all as specified and directed.

M&L for providing cement concrete 1:4:8 type D2 (Using 40mm graded stone agg) in foundation, mass concrete and filiings complete all as specified and directed.

M&L Form work to side of concrete in fdns, footing base, base of columns, side and soffits of plinth beam and simillar work complete all as specified and directed.

M&L Form work to side of sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, and simillar work complete all as specified and directed.

M&L Form work to side of columns and simillar work complete all as specified and directed.

M&L for providing reinforcement cement concrete M-25 (Design Mix) as in footing, foundation,beams, plinth beams, base for columns and mass concrete etc complete all as specified and directed.

M&L for providing reinforcement cement concrete M-25 (Design Mix) as in Beams, cantilevers, ressummers, lintels over 1.5m span concrete etc complete all as specified and directed.

M&L for providing reinforcement cement concrete M-25 (Design Mix) as in columns and pillars etc complete all as specified and directed.

M&L TMT bars 10mm dia and over, cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as spd & directed.

M&L TMT bars 5mm dia and over upto including 10mm dia in stirrups spaces and binders cut to length bend to shape required including mild steel wire ( annealed) not less than 0.9 mm dia all as spd and directed.

Demolition of Brick/stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashler facing, dressed stonework and precast concrete articles.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.

M&L for Random rubble masonry using sand stone uncoursed well bonded bedded and solidly hearted built in CM 1:4 complete all as specified and directed

All as per item above but except stone.

Taking down of cement plaster of any description including racking out of joints hacking for keys and scrubing down with water etc.

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces with cement mortar 1:4 mixed with WPC, finished even and smooth without using extra cement complete all as specifed and directed. Note :- (WPC shall be paid separately).

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces with cement mortar 1:6 finished even and smooth withot using extra cement.

Rendering 15mm thick on stone masonry surfaces or other than fair faces in cement mortar 1:4 finished even and smooth (without using extra cement).

M&L for Preparation of new plastered surfaces and applying three coats of white wash/colour wash on walls complete all as specified and as directed.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

S&F Mild Steel Work as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

M&L MS screw bolt diameter of shank 11 to 15mm (machine made) with hexagonal head at one end screwed the other or screwed both ends, each screw end fitted with washers and one hexagonal nut exc 5cm but n.exc 10cm complete all as specified and as directed by Engr-in-Charge.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment etc complete all as specified and directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering including necessary scaffolding, any type, any location/ height complete all as specified and directed by Engr-in-Charge.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

M&L for sand filling under floor or in foundation including watering and consolidation etc complete all as directed.

M&L hardcore of gauge n.exc. 63mm deposited, spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface for plinth protection/path.

Demolition of cement conc (Un-reinforced ) in ground floors and pavings n exc. 15cm thick. (Below or above ground level).

75mm thick plain cement concrete 1:4;8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base or floor complete all as directed by Engr-in-Charge.

M&L 100mm thick PCC 1:4:8 type D2 (40mm graded aggregate) for floor sub base complete all as specified and directed.

M&L Vitrified Ceramic Tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm as in floors, set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over 15mm thick screed bed in CM 1:4 over 25mm thick PCC 1:2:4 type B0 (using 12.50mm graded crushed stone agg).etc complete all as specified and as directed.

M&L Chequered cement concrete tiles (200x200x25mm) thick with grey cement and no pigment, set jointed & pointed in neat cement slurry in floors over 15 mm thick screed bed of 1:4 cement mortar complete.

M&L providing 25mm thick cement concrete 1:2:4 type B1 (Using 20mm graded stone agg), as in sub base in floor/paving etc complete all as specified and directed.

M&L machine cut kota stone flloring 20-25mm thick over 20mm thick cement screed (1: 6) base alid and jointed with grey cement slurry mixed with pigment match the shade of the slab including rubbing and polishing complete all as specifed and directed.

M&L 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as specified and directed.

Taking down chowkat with shutters n. exc.1.5 Sqm (without taking off shutters from chowkhat) complete all as specified and directed by Engr-in-Charge.

S&F 2nd class soft wood plain solid straight chowkats and frames wrought framed, rebated on the solid all as specified.

S&F Pressed steel door frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and as directed.

M&L for providing plain cement concrete 1:3:6 Type C-0 (using 12.5mm graded stone aggregate) as in filling hollow of pressed steel frame.

S&F 35 mm thick second class soft wood, plain framed, panelled shutters (any number of panel) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density wood particle board with commercial face veneers. complete all as specified and directed.

S&F glazed & skeleten shutters 35mm thick 2nd class softwood, open rebated and prepared to receive glass, gauze, etc, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part I Section 8 clause 8.24 (a) fitted to chowkhats.

S&F glazed & skeleten shutters 30mm thick 2nd class softwood, open rebated and prepared to receive glass, gauze, etc, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part I Section 8 clause 8.24 (b) fitted to chowkhats.

M&L for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded.

M&L for Steel ventilators, fixed type, with glazing bars complete all as specified and as directed.

S & F framed work such as grills, gratings etc with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar works confirming to Fe-290. Gde-E-165 complete all as specified and directed.

S & F in Stainless Steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F 100 mm long butt hinges extruded aluminium anodised.

S&F 75 mm size mild steel butt hinges medium weight.

S&F aluminium anodised barrel tower bolt of extruded section 150mm length.

S&F 75 mm long aluminium anodised barrel tower bolt of exturded section.

S&F aluminium anodised alloy handles fabricated type 150mm size of handle.

S&F 100 mm long aluminium handles cast type anodised.

S&F 300mm, MS ordinary rat tailrod pattern springs including roller and roller plate complete.

S&F 300mm long aluminium alloy, anodised sliding door bolt, with hasp and staple (bolt type) cast or extruded section and fixing bolts of extruded section.

S&F floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel pin fixed to door, over all length 140 mm.

S & Fixed in repairs Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and as directed.

Hacking out old broken glass (any thickness, size quality of description) from wooden frames or stone, concrete or brick sorrounds, glazad with putty or fixed with beads.

S&F sheet glass 3 mm thick, ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and as directed.

S&F frosted or grouded/obscured type sheet glass, 3mm thick and glazing with oil putty in squares n.exc 0.5 Sqm in each pane complete all as specified and as directed.

M&L for 4.0 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exceeding 0.5 Sqm in each panes complete all as specifed and directed.

S&F 20mm thick 2nd class softwood boarding, planed one side , with butt joints and fixed with nails in facia eaves boarding complete all as specified and direced by Engr-in-Charge.

M&L preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide/zinc chrome primer complete all as specified and as directed.

M&L for Preparation of newly un treated surfaces and applying two coat of synthetic enamel paint over a coat of pink primer on wooden surfaces of any description not other wise described over 10 cm width or grith etc complete all as specifed and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in hard/dense soil complete all as specified and directed.

Removing excavated material (soil) n .exc 50m and deposited where directed at a level n exc. 1.5m above the strating point complete all as specified and directed.

Dismantling wall and ceiling boards or insulation boards/slabs/blankets, any thickness including cover fillet.

M&L Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces, 9mm thick; fixed with nails to timber frame work as in ceiling complete.

M&L Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; 9mm thick, fixed with nails to timber frame work as in walls complete.

M&L 2nd class softwood wall panelling of good quality wood planed one side and edges tonged and grooved or rebated other side and doevetailed joints, chamfered both sides fixed to frame work with secret nailed as in wall/ceiling panelling 15mm including cornice and beading as required and applying two coats of varnish over a filled coat of thin varnish after preparation of the surface, complete all as specified and as directed. Note : Framework shall be measured and paid separately.

M&L for Preparation of old painted surfaces and applying two coats of synthetic enamel paint on steel surfaces of any description not other wise described over 10 cm width or grith etc complete all as specifed and as directed.

M & L Plain fillets 2nd class soft wood of exc. 3 & n exc. 6 Sqcm, square rectangular or triangular in section , clean swan, secured nails.

Dismantling timber scantling 40 Sqcm and over in section in any position in unframed work.

M & L second class soft wood in scantling clean swan complete all as specified.

All as per item above but except timber.

Dismantling of boarding of any description fitted in any position with nails.

M&L 2nd class softwood weather boarding clean sawn, plain 20mm thick or feather edged 15mm to 20mm thick and fixed with 30mm laps.

All as per item above but fixing only.

S&F in repairs Vitreous China Wash down water closet pan (Pedestal pattern), white incl plastic water closet seat and cover closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device & incl P or S trap and connection to trap and to the flushing system anti syphonage pipe etc (excluding flushing cistern and flush pipe) complete all as specified and as directed.

Supply & Fixing in repairs Vitreous China Ware Wash hand basin white flat back size 550mmx400mm including pedestal, cutting for and pinning ends of brackets or erecting stand including necessary PVC outlet pipe, CP coupling 32mm dia complete all as specified.

S&F in repairs PVC valveless,syphonic action type, low level PVC flushing cistren 10 ltr cap white with flush pipe & all fitting complete all as specified.

S&F in repair Stop valves cast copper alloy,fancy type ,chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore pipe.

S&F in repair Bib taps cast copper alloy, chromium plated,with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule of 15mm bore.

S&F in repairs pillar tap cast copper alloy, fancy type with capstan heads chromium plated screwed down with high pressure with or without lettered hot or cold with long screwed, shanks and fly nuts screwed for iron pipe 15mm dia complete all as specified and as directed.

S&F 1000 Ltr capacity PVC water storage tank (cylinderical vertical with closed top ) and fixed in position all as specified in SSR Part -I, including dismantling of old tank.

S&F in repair ball valves, 20mm bore, high pressure,with polythene float and flynut complete.

S&F in repair 20mm bore gun metal globe or gate valve with iron wheel head, screwed both ends.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm.

Taking up or down 15mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 20mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

S&F GI tube 15 mm dia medium grade galvanished with all fittings laid in floors /wall etc. complete all as specified and as directed.

S&F GI tube 20 mm dia medium grade galvanished with all fittings laid in floors /wall etc. complete all as specified and as directed.

Dismantling of rain water pipe and sewage line pipe of any type and any size including fitting complete all as specified and as directed.

S&F 110mm dia PVC (SWR) pipes single socketed, in any length, laid in trenches or in floors / fixed to walls

S&F 75mm dia PVC (SWR) pipes single socketed, in any length fixed to walls / floors or in trenches.

S&F PVC (SWR) bends any radius, 110mm bore, fitted with oval access door.

S & F bend suitable for 110mm dia PVC (SWR) pipe complete all as specified and as directed.

S&F PVC (SWR) bends any radius, 75mm bore, fitted with oval access door.

S&F PVC (SWR) reducers any radius 110mm bore.

S&F 110mm bore PVC (SWR) junction, single (single T) equal or unequal with door access.

PVC (SWR) vent cowl 75mm dia.

M&L PVC(SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement.

Taking down copper/aluminium point wiring ( light fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) asd making good distribued surface of wall , floor etc complete all as specified and directed.

Point wiring for one light point/Ex/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi strand cable and 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi stranded cable (green color) as earth lead in and including cable 1100 volts grade including 25mm casing and capping (ISI marked) for one light/ fan point controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.Make : Finolex/Anchor/Polycab

Point wiring for 3 pin 5A socket outlet independent point controlled by one switch with 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi strand cable and 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi stranded cable (green color) as earth lead, 1100 volts grade including 25mm casing and capping (ISI marked) for one light/ fan point controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.Make : Finolex/Anchor/Polycab

Point wiring for one 3 pin 15 Amps socket outlet/sheet metal enclosure independent with 4.00 sqmm PVC insulated un-sheathed copper conductor single core multi strand cable and 2.5 sqmm PVC insulated un-sheathed copper conductor single core cable (green color) as earth lead in and including 25mm PVC caping casing medium grade with all fittings (ISI Marked) controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.Make : Finolex/Anchor/Polycab

M&L for LED Batten 1x20 W for regal batten for LED Universal batten for G 13 T with 18 W tube rods and Ultra bright LED Polycarbonate tube light very high efficiency suited for installation in existing T8 and connecting electrically using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as required at site or directed by Engineer-in-Charge.Make :Havells Batten Cat part No LHFYBYG21N1W020 and LED Tube Rod Cat part No LHLDCLXNUL8X018 or Equivalent.

Supply & fixing Switch piano type flush 6 Amp Single pole one way ( ISI Marked) complete all as specified and directed. Make : Havells/Anchor

Supply & fixing Switch socket combination 5 in 1, 5 and 15 Amp flush type universal controlled by one switch (ISI marked) complete all as specified and directed. Make : Havells/Anchor

Supply & Fixing Socket outlet 2 in1, 3 pin 5 Amps flush type complete all as specified and directed.Make : Havells/Anchor

Supply & Fixing ceiling rose surface backelite 65x50mm two to three terminal (ISI marked).Make : Havells/Anchor

S&F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

Supply & fix sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 8 way with IP-43 IK-09 protection single door complete with appropriate size bus bar and neutral link, conf to Cat Pt No 6077 11 of Legrand or equivalent of make Hager/Merlin Garin fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification .

Supply & Fixing RCBO, single pole and neutral (SPN) 30mA, 240V , 32 Amp all as specified and directed. Make- Havelles/MDS/Legrand.

Supply and fixing recess mounting luminaire with high brightness LEDs as light source, 36W (2x2ft Panel Light) suitable for Armstrong/Grid ceiling complete all as specified. Make : Havells, Bajaj, Philips.

Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.

S&F Single phase Voltage protection relay of trip setting 85 to 500 V AC complete with connecting testing and commissioning. All as specified and directed by Engr-in-Charge.

S&F house service bracket (hook type) complete with 3.0m long G.I. pipe 40mm dia Med. grade, two nos900 bends. M.S. hook and stay or guy complete all as specified and as directed by Engr-in-Charge. Make : Havells/Anchor/Polycab/Plaza.

M & L for sub main wiring with two single core 2.5 sqmm PVC insulated and unsheathed 1100 volts grade, stranded copper conductor FRLS ISI marked drawn into & including medium grade PVC conduit/ casing caping, with wooden or white colour casing caping (as specified and directed) 25 mm dia with all fittings and accessories and one continuous run of 1.5 sqmm copper conductor PVC insulated (green colour) as earth wire fixed into PVC casing / conduit (not less than 25mm outer dia) with all fittings and accessories fixed conealed/ surface including taking down old unserviceable submain wiring and making good disturbe surface complete all as specified and directed.Make of cable- Havells, Plaza, Policab.Make of Casing Caping - Poly plast/ pressfit/ Presto plast.

S&F 1100 volt grade heavy duty cable PVC insulated multistranded aluminum stranded conductor served with PVC tape and over all PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart including 4mm dia GI suspension wire one twin core cable flat of circular of size 10 Sqmm complete all as specified and as directed by Engr-in-Charge. Make : Havells/Anchor/Polycab/Plaza.

Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.3cm thick burried directly in ground ( earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanised iron wire 4.0mm dia by means of bolts, nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test all as specified or indicated including testing on completion.

Storage water heater (Geyser), vertical type, of 25 ltr capacity of inner tank, outer tank, syphon assembly, thermostat heating element, safety valve etc complete all as per manufacturer design and specifications including making of all fixing arrangements complete having BEE Five Star Rating including grouting of nuts and bolts and necessary PCC work as specified and directed by Engineer-in-Charge. Make : Havells model Monza DX HSN code 8516 or equivalent as approved by Engr-in-charge.

M/S SHAMAS PARWAIZ BHAT

M/S BEE AAY CONSTRUCTIONS

MOHAMMAD HAMZA SOFI AND SONS

Bidder Name

MOHAMMAD HAMZA SOFI AND SONS

M/S SHAMAS PARWAIZ BHAT

M/S BEE AAY CONSTRUCTIONS

GHULAM QADIR TANTRAY