Repair/ Renovation of Existing college Building of Govt. College for Women at Kathua (Balance work)

Amount

Dismantling doors, windows and clerestory windows of area 3 sqm and below (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking ,all leads & lifts.

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material including all leads & lifts.

Earth work excavation in all kind of soil by manual means in trenches for foundations, drains, pipes, cables etc. ( Not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, depth upto 1.5 mtr including disposal/filling of excavated earth all leads and lifts complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering including all leads, lifts and carriage of material by MT / H.L. All work upto plinth level.1 : 5 : 10 (1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size) .

Providing and laying in position cement concrete of specified grade1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal size) . excluding the cost of centring and shuttering including all leads, lifts and carriage of material by MT / H.L.- All work upto plinth level.

Brick work with F.P.S. bricks of class designation 75 in foundation and plinth including all levels, shapes, leads, lifts and carriage of material by MT / H.L. in 1:6 ( 1 cement : 6 fine sand) cement mortar

Half brick masonry with bricks of class designation 75 in foundations and plinth in cement mortar 1:4 ( 1 cement :4 coarse sand) including all leads, lifts and carriage of material by MT / H.L.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15º landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring., shittering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 Graded crushed stone aggregate 20mm nominal size) including all leads, lifts and carriage of material by MT / H.L.

Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete Thermo Mechanically Treated bars including all leads, lifts & carriage of material by MT / H.L.

Centring and shuttering including strutting propping etc and removal of form work for

Foundations, footings, bases of columns etc. for mass concrete

Suspended floors, roofs, landings, balconies and access platform.

12mm cement plaster of mix 1:4( 1 cement : 4 fine sand) including drip course /groove all leads, lifts and carriage of material by MT / H.L.

Strctural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing powder coated sheet for making shed of approved quality

Providing and fixing 35mm thick panelled or panelled and glazed shutters of Second class deodar wood for door, windows and clerestory windows including ISI marked black enameled M.S.butt Hinges with necessary screws including Panelling of Particle Board 12mm thick Plain particle board flat pressed, 3 layer (like Novapan, Ecoboard etc)or graded wood particle board (like Bhuttan Board) medium density grade 1, IS : 3087 marked

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick , Particle Board 12 mm thick plain particle board flat pressed, three layer or graded wood particle board medium density grade IS: 3087 marked.

Providing and fixing 35 mm thick Wire Gauze shutters using galvanised M.S. wire gauge of average width for aperture 1.4 mm in both direction with wire of dia. 0.63 mm for doors, windows & clerestory windows with hinges & necessary screws. ISI marked M.S. pressed bright finished butt hinges with necessary screws of req. size. Second Class deodar wood.

Providing and fixing 35mm thick glazed shutters of Second class deodar wood for doors, windows and clerestory windows using 10 kg/ sqm (4 mm thick) glass panes including black enameled ISI marked M.S. butt hinges with necessary screws.

Providing and fixing aluminum work for doors, windows ventilators and partitions with extruded built up standard tubular sections/appropriate Z. sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixed with dash fastener of required dia and size including necessary filling up of gaps at junctions i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, milted and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing/paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge( glazing, paneling and dash fasteners to be paid for separately.) For fixed portion anodized aluminum (anodized transparent or dyed to required shade according to IS : 1868 minimum anodic coating of grade AC 15).

Providing and fixing aluminum work for doors, windows ventilators and partitions with extruded built up standard tubular sections/appropriate Z. sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixed with dash fastener of required dia and size including necessary filling up of gaps at junctions i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, milted and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing/paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge ( glazing, paneling and dash fasteners to be paid for separately.) For shutters of doors, windows and ventilators including providing and fixing hinges/pivots and making provisions for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (fittings shall be paid for separately). Anodized aluminium (anodised transparent or dyed to required shade according to IS: 1868, minimum anodic coating of grade AC 15)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work.

Finishing walls with water proofing cement paint of required shade:Old work ( one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litres/10 sqm complete

Providing and fixing ACP sheet of 4.0 mm thick in partition/ door/ window including rubber gasket of approved quality as per the direction of Engineer-in-charge.

Renewing glass panes, with wooden fillets wherever necessary: glass panes weighing 10 kg/sqm.

Providing and fixing aluminium tower bolts ISI marked (anodised anodic coating not less than grade AC10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc complete

Providing and fixing aluminium handles ISI marked (anodised anodic coating not less than grade AC10 as per IS:1868)transparent or dyed to required colour or shade with necessary screws etc complete

Providing and fixing Ist quality ceramic glazed tiles conforming to IS : 13753 of minimum thickness 5mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Engineer-In-Charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. incl. all leads, lifts and carriage of material by MT / H.L.

Providing and fixing Ceramic glazed floor tiles 300 x 300 mm (thickness) to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITCO,ORIENT,SOMANY,KAJARIA or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1:4 (1 cement :4 coarse sand) including ;pointing the joints with white cement and matching pigment etc. complete including all leads, lifts and carriage of material by MT / H.L.

Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast iron P or S trap 10 litre low level P.V.C. flushing cistern including flush pipe pipe (of approved make ) manually controlled device ( handle lever) conforming to IS:7231,with all fittings and fixtures complete, including, cutting and making good the walls and floors wherever required. Long pan pattern white vitreous china W.C. pan of size 580 mm complete job.

Providing & fixing white vitreous china pedestal type Water closet ( European type W.C. pan ) with seat and lid,10 litre low level white P.V.C flushing cistern including flush pipe with manually controlled device( handle lever) conforming to IS : 7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever required. W.C pan with ISI marked white solid plastic seat and lid including all leads, lifts and carriage of material by MT / H.L.

Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fitting complete semi rigid pipe 32 mm dia

Providing and fixing wash basin with C.I / M.S brackets 15mm C.P brass pillar taps, 32mm C.P brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China. Flat back Wash basin size 450 x 300 mm with single 15mm C.P brass pillar tap

Providing and fixing white vitreous china pedestal for washbasin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265mm sizes respectively.

Providing and fixing G.l. pipes complete with G.l. fittings excluding trenching and refilling etc. (external work)

15 mm dia. Gl pipe Light

20 mm dia. Gl pipe Light

Providing & fixing ball valve brass of approved quailty

15mm nominal bore

20mm nominal bore

Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved for conforming to IS : 8931 15mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank I:S:I: 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank {Sintex, Elecroplast, Star, Lotus or equivalent having valid I : S: I license}

Providing and fixing Aquaguard of Kent,Havells etc. of 8 litres capacity including installation ( complete job).

Providing and fixing C.P brass bib cock of approved quality conforming to IS: 8931. 15 mm nominal bore complete job.

Providing and fixing PTMT, push cock of approved quality and colour 15 mm nominal bore, 80 mm long, weighing not less than 46 gms.

Providing & fixing G.l. Union in G.l. pipe including cutting & threading the pipe & making long screws etc. complete (new work) 20 mm nominal bore.

Providing & fixing mirror of superior glass Rectangular shape 1500 x 450 mm of approved quality and of required shape and size with plastic . moulded frame of approved make and shade with 6 mm thick hard board backing

Providing and fixing PVC Waste/sewerage pipe of 4 kg Pressure/sqm of Supreme/Prince/finolex make on wall face unplasticised rigid PVC rain water pipe conforming to IS: 13592 Type-A including jointing with seal ring conforming to IS: 155382 laving 10 mm gap for thermal expansion of approved quality 110 mm dia.

Supply and fixing C.P. grating 100 mm dia

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms.

kiran kumar

TARSEM CHAND

VIKRANT SINGH JAMWAL

Rajesh Kumar

ANIL SHARMA