PROVIDING SERVICES FOR OPERATION OF SWIMMING POOLS AND WS PUMPING INSTALLATIONS INCL STAND BY DG SETS AND REPAIR, MAINT OF SWIMMING POOL, PRESSURE FILTERS, CHLORINOME PLANTS AND OTHER ALLIED WORKS IN THE AREA OF AGE E/M (N) UNDER GE (N) PUNE

Amount

Providing services for Daily Maintenance, Manning & Operation of Swimming pool & Water Supply Installation at 1 Ashoka Marg Pump House, Water Supply Installation comprising with pumping set 7.50 HP - 03 Nos , electric panels, sluice valve for pumping and supply of potable water during supply hrs, swimming pool pumping installation comprising pumping set of capacity 7.50 HP - 2 Nos, operation of back wash system of capacity 3 HP - 02 Nos, Chlorine plant/ bleaching dozer - 01 No and Running of Stand by DG Sets of capacity 62.50 KVA – 01 No & DG Set of capacity 110 KVA – 01 No, during the mains failure, by deploying minimum ONE OPERATOR Semi Skilled (FGM) in each shift, round the Clock in THREE SHIFTS PER DAY (Morning, Evening & Night Shift) (8 Hour Per Shift) including Sundays and Holidays, complete all as specified and as directed by Engineer-in-Charge.

NOTES :- (a) The term ‘Daily Operation’ includes Minor Maintenance like General Clearing, Cleaning of Machines, Equipments and Hourly Reading, Recording of Each Plant. Log Sheet(s) will be provided by the Contractor to all Equipments of each DG set wise in Standard Proforma to make Record in consultation with Engineer-in-Charge. (b) Engine Oil, DHPP for running the DG Set as required shall be issued by department under Sch 'B' as ‘FREE-FOR-USING & RUNNING’ only, the transportation including labour for collection shall be contractor's responsibility without any extra cost to the Govt. (c) SHIFT DUTIES (TIMMINGS) (i) Morning Shift : 0600 Hours to 1400 Hours (ii) Evening Shift : 1400 Hours to 2200 Hours (iii) Night Shift : 2200 Hours to 0600 Hours.

Providing services for Daily Maintenance, Manning & Operation of Water Supply Installation at PCDA SC Pune comprising with pumping sets of capacity 5 HP – 02 Nos and operation of electric panels, sluice valve and electric panels for pumping and supply of potable water during supply hrs and Running of Stand by DG Set during the mains failure of capacity 160 KVA – 01 No, by deploying minimum ONE OPERATOR Semi Skilled (FGM) daily in ONE SHIFT PER DAY (Morning) (8 Hour Per Shift) including Sundays and Holidays, complete all as specified and as directed by Engineer-in-Charge.

NOTES :- (a) The term ‘Daily Operation’ includes Minor Maintenance like General Clearing, Cleaning of Machines, Equipments and Hourly Reading, Recording of Each Plant. Log Sheet(s) will be provided by the Contractor to all Equipments of each DG set wise in Standard Proforma to make Record in consultation with Engineer-in-Charge. (b) Engine Oil, DHPP for running the DG Set as required shall be issued under Schedule ‘B’ as ‘FREE-FOR-USING & RUNNING’ only, the transportation including labour for collection shall be contractor's responsibility without any extra cost to the Govt. (c) SHIFT DUTIES (TIMMINGS) (i) Morning Shift : 0600 Hours to 1400 Hours

Providing services for Daily Maintenance, Manning & Operation of Water Supply Installation at Test Audit Colany Pump House- Pump sets of capacity 03 HP – 02 Nos, 16 Queen Garden Pump House- Pump set of capacity 03 HP - 02 Nos and operation of electric panels, sluice valve and comprising with electric panels for pumping and supply of potable water during supply hrs by deploying minimum ONE OPERATOR Semi Skilled (Valve man/ Pump operator) in each shift, daily in TWO SHIFTS PER DAY (Morning, Evening ) (8 Hour Per Shift) including Sundays and Holidays, complete all as specified and as directed by Engineer-in-Charge.

NOTES :- (a) The term ‘Daily Operation’ includes Minor Maintenance like General Clearing, Cleaning of Machines, Equipments and Hourly Reading, Recording of Each Plant. Log Sheet(s) will be provided by the Contractor to all Equipments of each plant wise in Standard Proforma to make Record in consultation with Engineer-in-Charge. (d) SHIFT DUTIES (TIMMINGS) (i) Morning Shift : 0600 Hours to 1400 Hours (ii) Evening Shift : 1400 Hours to 2200 Hours

Providing services for Daily Maintenance, Manning & Operation of Water Supply Installation at SCOM PUMP HOUSE comprising with pumping sets of capacity 10 HP – 02 Nos, electric driven AC 3 phase 415 volts, with electric panels, sluice valve for pumping and supply of potable water during supply hrs and Running of Stand by DG Set during the mains failure of capacity 125 KVA – 01 No., by deploying minimum ONE OPERATOR Semi Skilled (FGM) in each shift, round the Clock in THREE SHIFTS PER DAY (Morning, Evening & Night Shift) (8 Hour Per Shift) including Sundays and Holidays, complete all as specified and as directed by Engineer-in-Charge. by Engineer-in-Charge.

NOTES :- (a) The term ‘Daily Operation’ includes Minor Maintenance like General Clearing, Cleaning of Machines, Equipments and Hourly Reading, Recording of Each Plant. Log Sheet(s) will be provided by the Contractor to all Equipments of each DG set wise in Standard Proforma to make Record in consultation with Engineer-in-Charge. (b) Engine Oil, DHPP for running the DG Set as required shall be issued by department under Sch'B' as ‘FREE-FOR-USING & RUNNING’ only, the transportation including labour for collection shall be contractor's responsibility without any extra cost to the Govt. (c) SHIFT DUTIES (TIMMINGS) (i) Morning Shift : 0600 Hours to 1400 Hours (ii) Evening Shift : 1400 Hours to 2200 Hours (iii) Night Shift : 2200 Hours to 0600 Hours.

Providing services for Daily Maintenance, Manning & Operation of Water Supply Installation at Shanti Vihar Pump House comprising with Pump set of capacity 7.50 HP - 02 Nos and operation of electric panels, sluice valve and electric panels for pumping and supply of potable water during supply hrs and Running of Stand by DG Set during the mains failure of capacity 20 KVA – 01 No by deploying minimum ONE OPERATOR Semi Skilled (Valve man/ Pump operator) in each shift, daily in TWO SHIFTS PER DAY (Morning, Evening ) (8 Hour Per Shift) including Sundays and Holidays, complete all as specified and as directed by Engineer-in-Charge.

NOTES :- (a) The term ‘Daily Operation’ includes Minor Maintenance like General Clearing, Cleaning of Machines, Equipments and Hourly Reading, Recording of Each Plant. Log Sheet(s) will be provided by the Contractor to all Equipments of each DG set wise in Standard Proforma to make Record in consultation with Engineer-in-Charge. (b) Engine Oil, DHPP for running the DG Set as required shall be issued by department under Sch 'B' as ‘FREE-FOR-USING & RUNNING’ only, the transportation including labour for collection shall be contractor's responsibility without any extra cost to the Govt. (c) SHIFT DUTIES (TIMMINGS) (i) Morning Shift : 0600 Hours to 1400 Hours (ii) Evening Shift : 1400 Hours to 2200 Hours

General Notes for item No 1 to 5 :- (a) The Operator i.e FGM employed shall have requisite qualification and they should produce the attested copy of the certificates to the Engineer-in-Charge/GE before commencement of work. (b) Day to day maintenance shall be carried out by the contractor. Materials such as grease, glands etc shall be supplied by the contractor. No extra payment shall be made to the contractor for the same. (c) Protective clothing as per IS and safety instructions are to be provided by the contractor and will be continuously in use of the Operator on duty. No extra payment shall be made to the contractor for the same.

M & L for cleaning of balancing tank of swimming pool manually as described below complete all as specified and directed by Engineer-in-Charge. (a) Suitably blocking the incomming and outgoing wash out pipes for avoiding mud and foreign meterials deposited in the reserviors getting into pipes and chocking it prior to starting the cleaning. (b) Bail out complete water remaining in the balancing tank before cleaning the mud and other deposits. (c) Manually removing the deposited mud sludge and other foreign particles and depositing the same separately away from tanks in low laying areas and levelling as directed by Engr-in-charge. (d) Clean the floor wall and roof of the balancing tank by jetting water using rotary pressure jets, remove the sludge so deposited completely by rubbing the wall / floor with brushes and repeat removal and depositing (Approved detergent shall be used) (e) Disinfect the tank with FOA / WHO specified chemical and make the tank totally bacteria free.

Cleaning of overflow drainage of swimming pool with suitable chemical complete all as specified and directed by Engineer-in –Charge.

Taking out and removing existing sand, gravel, accumulated mud etc. (Filter media) from the pressure filter ( installed at various swimming pools), including cleaning of filter thoroughly inside by using soda ash etc, removing/ disposal of spoil to a distance not exceeding 50 metres complete all as specified and as directed by Engr-in-Charge. Note :- Detergent shall be used of SHO approved make.

M&L for preparation of surfaces of filter bed by scrapping with Wire Brush and applying two coats of Black Bituminous Paint suitable for Drinking Water, complete all as specified and as directed.

Supply, filling, testing and regulating swimming pool filter for proper filtering of water using Quartz Sand filter media, superior grade and quality and silica content should not be less than 90% using quartz sand in the existing filter for fresh gravel 12mm to 25mm size complete all as specified and as directed.

All as per serial item No. 10.00 here-in-before but for fresh gravel 6mm to 12mm size.

All as per serial item No. 10.00 here-in-before but for fresh gravel 2mm to 6mm size.

All as per serial item No. 10.00 here-in-before but for fresh gravel 1mm to 2mm size.

All as per serial item No. 10.00 here-in-before but for fresh sand 0.4 mm to 0.8 mm size

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing) removing the tiles and rubbish off the premisses complete all as specified..

Material and labour for light blue colour glazed ceramic tiles of size 7 to 8 mm thick (square/rectangular) area of each tile exc. 0.06 sqm but not exc 0.11 sqm in floor, pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in white or colour cement to match the colour of tiles over and including 15 mm thick cement screed bed CM (1:4) complete all as specified and as directed.

Material and labour for painting old steel and iron surfaces of valve pit cover/ sluice valve/ pipes/ pressure filter tank and fitting etc with one coat of black/ sky blue/ red of Japan paint including preparation of surface by means of wire brush/ emery etc and cleaning and painting with one coat of epoxy paint of appropriate colour shades including making directions with arrow complete all as specified and as directed

Material and labour for preparation of old painted PCC surfaces of water drainage, in side of swimming pool etc and applying two coats of sky blue water paint complete all as specified and as directed.

S & F CI sluice valve with both side flanged ends PN 1.6 ISI marked 150 mm dia including jointing material such as gasket, nut, bolts etc including removal of old unsv one complete all as specified and as directed by Engineer-in-Charge.

S & F CI sluice valve with both side flanged ends PN 1.6 ISI marked 100 mm dia including jointing material such as gasket, nut, bolts etc including removal of old unsv one complete all as specified and as directed by Engineer-in-Charge.

S & F CI sluice valve with both side flanged ends PN 1.6 ISI marked 80 mm dia including jointing material such as gasket, nut, bolts etc including removal of old unsv one complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 50 mm dia green/ white PVC Hose pipe flexible on suction pump complete including removal of unservicable PVC Hose pipe from suction pump complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 40 mm dia green/ white PVC Hose pipe flexible on suction pump complete including removal of unservicable PVC Hose pipe from suction pump complete all as specified and as directed by Engineer-in-Charge.

M & L for CI Foot valve ball type, flanged /inner threaded ISI marked including jointing material such as nut, bolt washer and packing material of 150 mm dia including removal of old unsv one complete all as specified.

M & L for CI Foot valve ball type, flanged /inner threaded ISI marked including jointing material such as nut, bolt washer and packing material of 100 mm dia including removal of old unsv one complete all as specified.

M & L for CI Foot valve ball type, flanged /inner threaded ISI marked including jointing material such as nut, bolt washer and packing material of 80 mm dia including removal of old unsv one complete all as specified.

Material and labour for taking out suction sweeper pumping set from foundation, disconnecting the water and electric connnection and transporting to work shop, opening the pump for inspecting all parts to identify defective parts, cleaning/ servicing and greasing including refixing and replacement of the following unsviceable items including testing and commissioning complete all as specified and as directed. i) Ball bearing as per existing make and size - 1set ii) Gun metal bush for pump - 1 Set. iii) Remetalling, grinding turning and facing of stainless steel shaft and impeller of pump. iv) Replacement of gland packing. v) Replacement of gland nut bolt and damaged foundation bolts. vi) Reassembling of pumping set and transporting back to pump house, installing, connecting with water and electric connection and testing for performance complete all as directed.

Material and labour for taking out suction sweeper motor for rewinding of electric motor by disconnection from terminal and pump coupling and foundation complete removing of motor, carrying to workshop and return after opening motor removing the old burnt winding wire, and replacing the winding with super enemeled copper wire of the same gauge, class 'F' and same turns, heating in oven for curing the winding wire after varnishing, balancing the rotor and reassemble the motor and replacement the following parts of capacity wise all as per following complete all as directed :- i) Ball baering as per existing - 2 Nos ii) Terminal plate - 1 No. iii) Foundation bolt - 4 Nos iv) Re-installing electric motor by connecting with pump and electric connection. v) Testing for performance complete all as required.

Supply & Fix Nylon rope made out nylon thread of dia 8-15 mm including removal of old unsv one complete all as specified.

Supply only Calcium Hypochlorite granual having chlorine concentration level 60 to 70 % for water treatment which is a white to off white free flowing granular as traditional product in 45 Kg packing complete all as specified. Make : As per E-in-C's Branch approved manufacturer.

Supply only Calcium Hypochlorite granual (Trichloroisocyanuric acid TCCA- 90) having chlorine concentration level 90 % for water treatment for swimming pool which is a white to off white free flowing granular as traditional product in 50 Kg packing complete all as specified. Make : As per E-in-C's Branch approved manufacturer.

Supply only sodium hypochlorite solution of 6 % strength in sealed container all as specified all as directed. Make : As per E-in-C's Branch approved manufacturer.

Supply only Copper sulphate for swimming pool water complete all as specified. Make : As per E-in-C's Branch approved manufacturer.

Supply only Alum crystal Non Ferric type conforming BIS 260-2001 (2nd revision) with 85% purity complete all as specified. Make : As per E-in-C's Branch approved manufacturer. Make : As per E-in-C's Branch approved manufacturer.

Supply and fix suction sweeper brushes made out of nylon material on wooden base suitable for existing suction sweepers at RSI area including removal of old unsv one complete all as specified.

Supply and fix PVC insulated sheathed multistranded copper conductor submerssible wire of size 3 core 4 Sq mm including removal of old unsv one complete all as specified.

Supply and fix PVC insulated sheathed multistranded copper conductor submerssible wire of size 3 core 6 Sq mm including removal of old unsv one complete all as specified.

Preparation of previously treated/old painted internal surface of underground sump, over head Tanks and applying One Coat of Black Bituminous paint suitable for Drinking water complete all as specfied and as directed.

Cutting unaxious green growth and grass by manual labour or by machine at all E/M water supply installation premisses and along the boundary fencing and removing rubbish from the site of work where directed not exceeding 100m from the starting point. (The green growth shall be cleaned once in every three month and the measurement shall be taken every time independently for executed quantity each time.

Supply and fix dosing mixture motor, single phase, 230 Volts, 50 Hz with Current consumption 0.4 amps, Power 120 watts, 4 pole induction non-synchronous 920 RPM approx under load Motor shaft dia 15 mm, length 50 mm Motor is flange mounted 4 No. of 7 mm dia holes at PCD 150 mm including removal of old unsv one complete all as specified. Make : As per E-in-C's Branch approved manufacturer.

Suppy and fix agitator shaft in the dosing tank made out of poly propylene rigid of dia 32 mm, length 500 mm with two bladed pitched blade turbine impeller with 3Nos. blades are welded to the shaft including removal of old unsv one complete all as specified and as directed. Make : As per E-in-C's Branch approved manufacturer.

Supply and fix of MS Pipe 150 mm bore heavy grade ISI marked with IS 1239 welded with 2 Nos. MS flanges 10mm thick including 90 degree bend and all other fittings i.e. elbow etc. and jointing material, in replacement of perished / damaged pipe including excavation, earth work complete all as specified and as directed.

Supply only Chloroscope test kit of range 0-2.0ppm, housed with box complete all as specified and as directed.

Supply only soda ash, of super qualiy, free from impurities complete all as specified and as directed.

Note : 1. Rerformance security:- Refer Condition 22 of Special Conditions 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

M/S DHEER ENGINEERING

ganesh electricals and airconditioners

M/S - KRUPA ELECTRICALS

Suchit constructions