SPL REPAIRS TO BLDG NO 1 MH (NORTH BLOCK) OF MILITARY HOSPITAL UNDER GE BELGAUM

Amount

Demolition of cement concrete in ground floors n exc 15cm thick unreinforced all as specified and as directed.

M&L for Plain cement concrete 1:3:6, type C2 using 40mm graded stone aggregate, 75mm thick as in plinth protection, path etc, and finishing the surface even and fair all as specified.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of appoved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing plain or corrugated steel sheeting any gauge and single layer, Mangalore pattern or similar tiles in roofing incl battens for tiles, shingles etc of any size including tilling fillets spaced exc 15 cm all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, valley gutter fixed with self tapping screws including dismantling of Mangalore pattern or similar ridge tiles in roofing all as specified and directed.

S&F Steel work in tubular trusses, posts,rafters, truss etc including special shaped washers etc. complete using ERW or induction butt welded tubes all as specified and directed.

S&F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc., n exc 10 kg each brackets, conforming to Fe 410-0 or Fe 310-0 (Brackets over 10kg each to be measured under `Structural Steel') as in cleats all as specified and directed.

S&F Mild Steel work as in wind ties etc. conforming to Fe-290 Gde- E-165 all as specified and directed.

Dismantling of timber scantling 40 Sqcm and over in section in any position unframed work all as specified and directed.

M&L second class hardwood in scantling clean sawn timber fixed all as specified and directed.

All as per item No. 9 but except timber

M&L for preparing surface of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with one coat of creosote oil all as specified and directed.

M&L PCC 1:3:6, type C-1, using 20mm graded stone aggregate as in eves filling between wall and tiles including demolition of plain cement concrete of any description and in any position not otherwise specifically provided all as specified and directed

M&L for prelaminated partical board18/19 mm interior grade prelaminated both sides with decorative choice laminations including dismantling boarding of any description ,fixed in any position with nails all as specified and directed.

M&L rendering 15mm thick cement mortar 1:6 for stone masonry surfaces and finished even and smooth w/o using extra cement including taking down cement plaster on brick or stone walls built in cement mortar.

M&L for rendering 10mm thick in cement mortar 1: 4 with water proofing compound over 10mm thick back rendering in cement mortor 1:6 on stone masonry surfaces finished even & smooth without using extra cement all as specified and as directed incl taking down cement plaster on brick or stone walls builts in cement mortar

Supply only water proofing compound

Taking down chowkat with shutters (W/o taking off shutters from the frame) exc 1.5 Sqm each & n exc 4 Sqm.

Taking down shutters of any description n exc 1sqm each all as specified and directed.

All as per item No 18 but exc 1sqm and n exc 2 Sqm.

S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

M&L for aluminium sliding windows (Triple track), fabricated to required size with standard aluminium anodised sections, with bottom track of size 92 x 31.75 x 1.6mm, side and top frame of size 92 x 31.75 x 1.4mm, top and bottom shutter rail of size 39x17x1.4mm, outer style of size 39 x 17 x 1.4mm, interlock style of size 39 x 27 x 1.4mm, including provision of 4mm sheet glass ordinary quality for panels including provision of all hardware fittings such as handles, locking arrangements, rubber gaskets, rollers, spring catchers etc. complete all as specified and directed.

M&L for powder coated aluminium frame work as in doors, windows, ventilators and partitions using standard aluminium anodised (15 micron) extruded sections including provision of glazing clips, hinges, handles, etc. all as specified and as directed. Notes: (i) All the aluminium sections provided under this item shall be measured and converted into weight for payment with the designated unit weight mentioned in the manufacturer's catalogue for the corresponding aluminium sections/ fittings. (ii) The rate quoted deemed to include necessary grouting/ embedding of the aluminium frames/ supports into floors/ walls and making good the disturbed surfaces to match with the existing surfaces and provision of necessary rubber gaskets. (iii) Particle board/ glass panels wherever required will be measured and paid separately.

M &L for 5.5mm thick sheet glass ordinary quality and glazing with glazing clips in square exc 0.5 sqm in each pane all as specified and directed.

M&L preparation of new steel surfaces of any description n exc 10 cm width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of red oxide primerall as specified and directed.

S&F 4mm thick High Pressure Steam Cured (HPSC) non asbestos fibre cement building board in false ceiling with aluminium anodized snap grid of 60x60cm size with Tee section 35x25x1.25mm, angle section 25x25x1.25mm thick including 2mm dia GI hanging wire including all hanger fittings etc and applying two coats of oil bound distemper on ceiling including dismantling of existing unserviceable false ceiling boards of any description and size alongwith snap grid frame works including making good disturbed wall/ ceiling surfaces all as specified and directed. Make : Bison panel, Everest, Ramco

Supplying and laying 20mm of CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceilings or laying in floors complete icluding taking up or down steel tubing 20 mm dia all as specified and as directed

Supplying and laying 25mm of CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceilings or laying in floors complete including taking up or down steel tubing 25 mm dia all as specified and as directed.

M&L for machine pressed precast concrete interlocking colour paver block any shape and size with glossy finish on top confirming to IS 15658-2006 of 60mm thickness, with grey cement and pigment M-35 grade including dismantling of floor tiling incl cement mortar bedding (but not backing) and removing, rubbish off the premises all as specified and as directed.

M&L 50mm thick sand cushion under interlocking paver blocks including watering and consolidation, complete all as specified and as directed.

M&L for 75mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base of flooring etc complete all as specified and directed.

M&L Preparing newly plastered surfaces of wall any description over 10 cm width or girth & applying two coats of plastic emulsion paint over primer coat and a coat of 3mm wall care putty complete all as specified and as directed.

M & L for two coats of 100 % premium acrylic emulsion paint having VOC less than 50 gm/litre and uv resistance as per IS 15489:2004, alkali & fungal resisatance , dirt resistance , exterior paint of required shade (Company depo tinted ) with silicon additive @1.43 Litres /10 sqm over and incl priming coat of exterior primer applied @ 0.90 Litres /10 sqm over new surface all as spd and directed.

M & L for two coat of exterior acrylic emulsion paint (Apex paint or equivalent ) over a coat of alkali resistant priming coat on old plastered surfaces including preparation of surface of walls after complete removal of existing treatment all as specified and directed.

M&L preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

M&L preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink oxide primer all as specified and directed.

Dismantling stone slab and tiles of any description or thickness in floors ,apron etc laid beded and pointed in any mortar all as specified and directed.

M&L for machine cut Granite stone slabs, 20mm thick, premium quality, any colour, as in flooring, set and jointed with neat cement slurry and pointed with grey cement mixed with pigment to match the shade of the slab over20mm thick screed bed in cement mortar 1:4 including rubbing and polishing complete all as specified and as directed.

M&L for machine cut Granite stone slabs, 20mm thick, as in risers of steps, skirting, dado, cladding to pillars, etc., laid and jointed with grey cement slurry mixed with pigment to match the shade of the tiles including bull nosing the edges, rubbing and polishing complete including 10mm thick backing coat in CM 1:4 all as specified and directed.

S&F PVC (SWR) pipes 110mm dia, single socketed in any length fixed to walls & jointed with solvent cement including demolition of breaking up drain pipes( AC or reinforced concrete )set in cement mortar for 110mm or less internal dia of pipes all as specified and as directed.

S&F PVC (SWR)eaves gutter half rounded 160mm dia including taking down old eaves gutters and rainwater pipes (any size or pattern) , including all fittings etc.all as specified and directed.

M&L for pre-cast cement concrete solid block masonry, exc 10 cm width, blocks cast in PCC 1:3:6, type C1, using 20 mm graded stone aggregate and setting in CM 1:6 all as specified and directed incl demolition of existing precast concrete articles.

M&L for rendering 10mm thick in cement mortar 1:4 on fair faces of brick work or PCC block masonry or concrete surfaces finished fair & even cement complete all as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing, rubbish off the premises all as specified and directed.

M&L for 25mm thick plain cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate as in sub base for flooring all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25 mm thick over cement screed base,15 mm thick in Cm 1:6 jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing and polishing complete.

All as per item No 45 above but in risers of step,skirting ,dado all as spd and directed incl backing coat in CM 1:4 ,10 mm thk plaster.

M&L for Virified Ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigments to match the shade of the tile laid over and including 15mm thick screed bed in cement mortar 1:6 all as specified and directed.

M&L for Double Charged Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm n exc 0.42 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigments to match the shade of the tile laid over and including 15mm thick screed bed in cement mortar 1:6 all as specified and directed.

M&L for coloured non skid matt finished ceramic tiles, 6 to 7mm thick area of each tile exc 0.06 Sqm but not exc 0.11 Sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigments to match the shade of the tile laid over and including 15mm thick screed bed in cement mortar 1:6 all as specified and directed.

M&L for coloured glazed ceramic tiles 300mm x 450mm x 7 to 8 mm thick on vertical surfaces such as skirting, dados etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with surfaces including 10mm thick backing coat in CM 1:4 all as specified and directed.

S&F in repair vitreous china wash hand basin, white, size 550x400mm, including CI brackets and cutting for and pinning in ends of brackets or erecting stands etc. all as specified and directed.

S&F in repairs vitreous china squatting pan, Orissa pattern, size 580mm x 440mm, white, with integral foot rest (excluding flushing cistern) including 'P' or 'S' trap etc complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white, including 'P' or 'S' trap, plastic water closet seat of any colour as approved by GE, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device, fixing bolts etc, connecting to drain pipe and flushing pipe all as specified and as directed.

S&F in repairs Vitreous China urinal,Half stall type, white, with grating and union for discharge pipe including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, connecting to (excluding flushing cistern, flush pipe and waste pipe) all as specified and as directed.

S&F in repairs syphonic action type low level PVC flushing cistern, 10 litres capacity, white, with inlet, ball valve, float, handle and flush pipe etc complete all as specified and directed.

S&F in repairs PVC connection 15mm size with PTMT nuts, 600mm long all as specified and directed.

S&F in repairs brass chromium plated shower rose swivel type 125mm size including provision of 195mm long brass CP shower arm suitable for fixing with 15mm bore pipe all as specified and directed.

S&F in repairs stainless steel Towel rail, 'D' type, 600mm long between flanges with and including stainless steel screws & wooden/ plastic cleats all as specified and as directed.

S&F in repairs pillar taps, brass chromium plated with capstan heads, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed down high pressure screwed for 15mm bore GI pipe all as specified and directed.

S&F in repairs 15mm bore stop valves, fancy type brass CP, with long shank and cup (concealed type), screwed down high pressure, screwed both ends for iron pipe for unions all as specified and as directed.

S&F in repairs 15mm bore stop valves, fancy type brass CP, screwed down high pressure, screwed both ends for iron pipe for unions all as specified and as directed.

S&F in repairs health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook incl making connection and fixed in position complete all as spd and directed.

S & F in repairs 15 mm bore Bib tap, long body, brass chromium plated, fancy type with wall flange, with crutch or butter-fly handle, screwed down, screwed for iron pipe or for brass ferrule etc all as specified and directed.

S&F in repairs 15mm bore Brass CP, 3 way mixer tap, fancy type for mixing hot & cold water screwed down for iron pipe and fixed all as specified and as directed.

S&F in repairs 15 mm bore 2 way Bib tap, long body, brass chromium plated, fancy type, with crutch or butter-fly handle, screwed down, screwed for iron pipe or for brass ferrule etc all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware,AC or Reinfoced concrete ) set in cement mortar

S&F 110mm bore UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls all as specified and directed.

S&F 110 mm bore UPVC (SWR) pipes, single socketed, in any length, with solvent cement joints, laid in trenches or in floors, all as specified and directed.

S&F 75mm bore UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls all as specified and directed.

S&F 75 mm bore UPVC (SWR) pipes, single socketed, in any length, with solvent cement joints, laid in trenches or in floors, all as specified and directed.

S&F 50mm bore LDPE pipes of pressure rating 6 kg/ Sqcm and fixed complete to walls, ceilings, or in floors all as specified and directed.

S&F 32mm bore x 900mm long LDPE pipes of pressure rating 6 kg/ Sqcm and fixed complete to wash basin/ urinal all as specified and directed.

S&F 75mm bore UPVC (SWR) bends any radius with access door all as specified and directed.

S&F 110mm bore UPVC (SWR) bends any radius with access door all as specified and directed.

S&F 110mm bore UPVC (SWR) branch piece, single Y, equal or unequal with access door all as specified and directed.

S&F 110mm bore UPVC (SWR) vent cowl all as specified and directed.

S&F PVC (SWR) floor trap plain with grating including jointing with solvent cement 75mm dia outlet all as specified and directed.

S&F in repairs UPVC (SWR) gully trap 125/110mm, setting & jointing with solvent cement all as specified and as directed

M&L for solid PVC Door Frame of size 50mm x 47mm made out of 5mm prelaminated PVC sheet on both sides reinforced with M.S. Square tube, supplying and fixing in opening as per specification and drawing all as specified and as directed.

M&L for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded prelaminated PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelaminated PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of prelaminated PVC sheets on both sides to be fitted in the M.S. frame welded / sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing all as specified and directed.

S&F stainless steel butt hinges 100mm in size, medium weight, cold rolled all as specified and directed.

S&F aluminium anodised barrel tower bolt 100mm size all as specified and directed.

S&F aluminium handle, 'D' type, anodised 100 mm in size all as specified and directed.

M&L preparation of RCC roof slab by removing dust, dirt & applying oil bound bituminous primer at 1.7kg per Sqm & providing 3mm thick APP based polymeric membrane weight not less than 4kg/Sqm reinforced with non oven polyester mat weight not less than 150 gms per Sqm including min 10cm side/over lap & including applying a coat of blown hot bitumen grade 85/25 over membrane at 1.2kg per Sqm & on drying apply a coat of solar reflective bituminous aluminium paint at 0.1kg/sqm including removing existing roof/chajja treatment of any type like plastic felt/HP tiles including existing plastering /concrete in covering of any thickness & cleaning the slabs with wire brushes complete including removal of debris to a distance exc 50 m but n exc 100m and M&L Brushing with neat cement slurry @ 3Kg/Sqm , M&L rendering 10mm thick on concrete surfaces in CM 1:3 over roof finishing surface even and smooth without using extra cement with water proofing compound (water proofing compound will be measured separately)

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed

Taking down carefully sub main wiring of any type and size and making good disturbed surfaces of walls, floors etc all as specified and as directed.

M&L for point wiring 1.5 Sqmm single core PVC insulated FRLS unsheathed 1100 volts grade copper conductor multi-stranded cables drawn through PVC casing capping of suitable size with all necessary fittings and provision of one run of PVC insulated FRLS unsheathed 1100 volts grade copper conductor multi-stranded single core cable of size 1.5 sqmm and connected to common earth dolly including provision of suitable size of modular metal surface box including with frame fixing in wall with white colour base platae and cover plates for mounting modular type switches, sockets, fan regulators, bell pushes etc. for one light point controlled by one switch 1 way complete one light point controled by one 1 way switch, all as specified and as directed.

All as described in item No. 88 but for one fan point /Exhaust fan controlled by one switch and regulator.

All as described in item No. 88 but for one call bell point controlled by one bell push

All as described in item No. 88 but for one 05 Amps socket outlet on independent board.

All as described in item No. 88 but for one 05 Amps socket outlet on the same board with other switches.

All as described in item No. 88 but wiring with 2.5 Sqmm PVC insulated unsheathed cable copper conductor multi stranded (for 15 Amps power socket) with one run of copper conductor PVC insulated multi-stranded cable 2.5 Sqmm for earth continuity conductor and connecting to common earth dolly, complete all as specified and as directed.

Material and labour for Sub main wiring of any type and size and provision of new sub main wiring with 2 runs of single core PVC insulated unsheathed multistranded copper conductor cables FRLS of size 6.0 Sq mm drawn through and including PVC casing capping of suitable size with all necessary fittings and provn of one run of 6.0 sqmm PVC insulated unsheathed multistranded copper conductor double core cable as earth continuity conductor and connecting to common earth dolly all as specified. Note :- 03 run of 6.0 sqmm including 01 run of PVC CASING CAPPING will be measured as one length complete all as specified and directed.

S&F modular switch piano type 6 Amps flush button 230 volts AC one way, complete all as specified and as directed.

S&F modular bell push flush type AC 230 Volts 6 Amps, complete all as specified and as directed.

S&F modular switch piano type 16 Amps flush button 230 volts AC one way, complete all as specified and as directed.

S&F modular socket outlet 6 Amps 2/3 pin combined flush type multipurpose 2 module, complete all as specified and as directed.

S&F modular socket outlet 6/16 Amps 2/3 pin combined flush type multipurpose 2 module, complete all as specified .

S&F modular fan regulator electronic step type 2 module suitable for 1200/1400 mm sweep ceiling fan complete as specified .

S&F in repairs or replacement of ceiling rose 3 terminal suitable for 230 volts AC supply, complete all as specified and as directed.

S&F in repairs call bell, ding dong, 230 volts AC supply all as specified and directed.

S & F in repair LED INTEGRATED BATTEN T5 tube light fitting type 1x 18/20 watt indoor decorative aluminium extruded T5 LED Battens-integrated type complete with all accesories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed

S & F in repair LED INTEGRATED BATTEN T5 tube light fitting type 1x 9 /10 watt indoor decorative aluminium extruded T5 LED Battens-integrated type complete with all accesories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed

S & F in repair round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed

S&F in repairs energy saving surface mounted, decorative oval bulk head edge-lit LED luminaire 10W, comprising of high brightness LEDs. comprising of high brightness LEDs complete with all accessories internally pre wired complete including provision of 10 Watts high brightness LEDs 6000K, suitable size wooden board with sunmica top and connecting up light fitting with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector block complete all as specified and directed. Make: Havells ENDURA RUGBY NEO N- IP65 or equivalent in CG/ Philips/ Wipro

S & F in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

S & F in repair LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete

Supply and fixing ceiling fans complete with blades, down rods, electronic modular regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) ,Taking down existing unserviceable ceiling fan from the location and setting aside for fixing /deposting to MES store yard complete all as specifed and directed

M&L for 50mm bore GI tubes, medium grade as in supports for hanging ceiling fans of 1200/ 1400mm sweep, cut to required length, grouted into wall and making good distured surfaces as required all as specified and as directed.

M&L for down rods for ceiling fan, as per required length of 20 mm dia of medium grade duly threaded for check nut and holes drilled for split pin including mild steel bolts and nuts, double washers and rubber reel bush suitable for ceiling fans of 1200mm sweep fixed in repairs all as specified and as directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm with necessary grouting and fixing arrangements and provision of 3 core flexible copper conductor cable of size 1.5 sqmm size from ceiling rose to connector of exhaust fan complete all as specified and directed

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed by Engr-in-Charge

Taking down old and US MCCB DBs/MCB DB including MCB/MCCB/Isolaters all as specified and directed by Engr-in-Charge.

S&F of Sheet metal enclosure type TP&N Vertical Loadline DBs are fitted with Bus Bars, Neutral Links, Blanking Plates (without MCCB) 8 Way with double door type and including provision of 2nd class hard wood board with sunmica top of suitable size fixed to wall and fixing of the MCB DB on board complete all as specified and directed.

Supplying & fixing in replacement MCCB,4 pole,100 Amps , 16 KA current rating conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified.

Supply and fix single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps capacity including taking down old one complete all as specified and directed.

S&F of Sheet metal enclosure MCB DB SPN 12 way with 200 Amps rated bus bar double door type and including 2nd class hard wooden board 4cm depth with sunmica top of suitable size to fix the MCB DB, complete all as specified and as directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 to 63 AMP following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.

S&F of MCB DP 63 A 10KA C series 50HZ AC supply incl dismantling old one, complete all as specified and as directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SP 6 to 32 AMP following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.

M&L for electrical earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick, burried directly in ground vertically, (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level, connected to GI wire 4mm dia (7.5 metre long) by means of bolts, nuts, washers made of galvanized iron connected to earthing to body of equipment. GI wire protected by 15mm dia light grade GI pipe (7.5 metre long) and watering arrangements with 20 mm dia GI pipe medium grade and GI funnel all as specified and shown in Electrical Plate No 3 of MES Schedule (SSR) Part I including necessary excavation and earth work in any type of soil, charcoal dust salt, and PCC 1:2:4 type B1 in chamber, RCC 1:2:4 type, B1 cover slab, 40mm thick with 6mm dia mild steel bars at 100mm centre to centre both ways and with 6mm dia MS hook complete, and testing of Earth resistance all as specified and as directed.

Supply and lay pipe galvanized, “Medium class”, including fittings complete under trenches including all fittings of following size including taking up or down steel tubing of size upto 40 mm & 25 mm bore and connections :- (a) 40 mm dia

(b) 25 mm dia

Excavating in trenches n exc 1.5m wide and n exc 1.5m depth and getting out in any type of soil for laying cables, pipes, etc. all as specified and directed.

Returning filling in including spreading leveling, watering and well ramming in layers n.exc 25cm thick all as specified and directed.

Removing excavated materials to a distance n exc 50m and depositing where directed at a level n.exc 1.5m above the starting point all as specified and directed.

M&L for 1000 litres capacity rotational moulded polyethylene (HDPE) water storage tanks, 'ISI' marked, cylindrical, vertical with closed top conforming to IS 12701-1989 having two layers wall construction with manhole lid and suitable locking arrangement including making holes for inlet, outlet and over flow pipes, hoisted, fixed in position and testing complete including demolition/taking down of the existing RCC/PVC water storage tank of any description from the existing staging/ Bldg after disconnecting and dismantling of all existing pipe line connections carefully all as specified and directed.

S&F for 25 mm dia PTMT ball valves high pressure (minimum weight 210 grams) with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe all as specified and directed.

S&F for 25 mm bore gun metal gate valve heavy duty ISI marked with iron wheel head screwed both ends to iron pipes and fixed all as specified and as directed

S&F for 40 mm bore gun metal gate valve heavy duty ISI marked with iron wheel head screwed both ends to iron pipes and fixed all as specified and as directed

M&L for construction of valve chamber of internal size 900 x 900 x 860mm suitable for 250 mm dia sluice valve including necessary earth work excavation PCC 1:4:8 in foundation type D-2 using 40mm graded stone aggregate, brick wall in CM 1:4, PCC 1:2:4 type B-1 for coping, 15mm thick rendering in CM 1:4 including provision of MS sheet cover 3.0mm thick with MS angle frame 40 x 40 x 3mm all round and at diagonals of size 40 x 40 x 6mm and also MS plate welded to MS angl, embedded in concrete with suitable hinges and locking arrangements, including two coats of synthetic enamel paint over a coat of red oxide primer necessary excavation earth work etc, all as specified and as directed.

Supply and laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 35 sqmm 3.5 core including taking down existing cable and cable protection GI Pipe of any size complete all as specified and directed.

M&L for Double wall corrugated HDPE pipes of ISI marked 63 mm outer dia and 50 mm inner dia for cable protection laid in trenches with necessary arrangement or roads crossings etc complete all as specified and directed.

S&F GI pipe light grade 50mm dia with all fittings & fixed complete on pole/walls/in road etc for cable protection

Mehta and Co.

M/s. VIJAY ELECTRICALS

M/S JAYDEEP CONSTRUCTION

DHANSHRI ENTERPRISES

Manak landmarks