Tender ID

Andaman Nicobar

Active

Works

Civil Works - Others

Providing and fixing signage at Kamorta Port

Chief Engineer Andaman Public Works Department (APWD)

Kamorta | Nicobars, Andaman And Nicobar Islands

Amount: ₹1.4 LCloses: 13 Nov 20266d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published3 Nov 2026
Closes13 Nov 2026
Bid Opening13 Nov 2026

Tender Value

₹1.4 L

EMD Value

₹2,702

Closing Date

13 Nov 2026, 3:00 pm6d left

Tender Inviting Organisation

Name

Executive Engineer

Address

CD APWD Kamorta

Work Description

Providing and fixing signage at Kamorta Port

Tender Information

Tender ID

2026_APWD_25618_2

Reference Number

18/NIT/DB/CD/KMT/2026-27

Tender Type

Open Tender

Product Category

Civil Works - Others

Form of Contract

Percentage

Period of Work

90 days

Location

Kamorta

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer tender document

Documents Required

8 documents required · 8 mandatory

Fee/PreQual/Technical

RequiredScan copy of EMD (.pdf)

RequiredScan copy of GST (.pdf)

RequiredScan copy of similar work experience certificate (.pdf)

RequiredScan copy of affidavit as per clause1.2.1 of CPWD-6 (.pdf)

RequiredScan copy of last 07 years financial audit statement (.pdf)

RequiredScan copy of bidding capacity form C-3 (.pdf)

RequiredScan copy of undertaking (.pdf)

Finance

RequiredPrice bid (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹2,702

Important Dates

Last Activity

3 Nov 2026

Published

3 Nov 2026

Bid Opening

13 Nov 2026

Download Starts

3 Nov 2026

Download Ends

13 Nov 2026

Submission Starts

3 Nov 2026

Bill of Quantities

PercentageBoQ_Ver4.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (5 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Manufacturing, supplying and fixing retro reflective sign boards made from 1.25 mm thick stainless steel 304 sheet, with the front face fully covered using high intensity encapsulated type, heat activated retro reflective sheeting conforming to type - IV of ASTM-D-4956-01 in blue and silver white or other approved colour combinations. The signage shall display all required subject matter, bi-lingual messages, symbols, and borders, applied to the substrate using an adhesive backing activited by heat and pressure confirming to class 2 of ASTM D4956-01. The reflective sheet shall be securely fixed to a stainless steel back support frame made from 25 mm diameter stainless steel 304 pipe 2.77 mm thickness @ 2.09 kg and supporting side frames 40mm ZSS Pipe S40 3.68 mm and 4.05 kg. The complete assembly shall be mounted on two vertical stainless steel 304 posts of 50 mm diameter SS Pipe S40 3.91 mm and 5.44 kg; each welded to a 200 mm x 200 mm x 6 mm stainless steel 304 base plate at the bottom. The signage shall be installed in such a manner that the minimum bottom edge height from the finished ground level is maintained 1.5 m. The work also includes drilling necessary holes in pipes, angles and flats etc, providing and fixing a stainless steel 304 message plate of the required size and executing the installtion with all necessary labour, tools, materials, transportation, leads and lifts all complete as per the direction of the E IC	4	Job	30,760	₹1,23,040
2Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
2.1	Nominal concrete 1:3:6 or richer mix (including equivalent design mix)	0.3	cum	2,892.8	₹867.84
3Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
3.1	1:2:4 (1 cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	0.3	cum	23,196.7	₹6,959.01
4Centering and shuttering including strutting, propping etc. and removal of form for
4.1	Foundations, footings, bases of columns, etc. for mass concrete	3.9	sqm	501	₹1,953.9
5	Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.	18	sqm	127.3	₹2,291.4

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.70 MB

Work Item Documents

edoc.pdf

Tender Documents • 7.99 MB

BOQ_27167.xls

BOQ • 0.28 MB

Instructiontobidders.pdf

Additional Documents • 0.45 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Manufacturing, supplying and fixing retro reflective sign boards made from 1.25 mm thick stainless steel 304 sheet, with the front face fully covered using high intensity encapsulated type, heat activated retro reflective sheeting conforming to type - IV of ASTM-D-4956-01 in blue and silver white or other approved colour combinations. The signage shall display all required subject matter, bi-lingual messages, symbols, and borders, applied to the substrate using an adhesive backing activited by heat and pressure confirming to class 2 of ASTM D4956-01. The reflective sheet shall be securely fixed to a stainless steel back support frame made from 25 mm diameter stainless steel 304 pipe 2.77 mm thickness @ 2.09 kg and supporting side frames 40mm ZSS Pipe S40 3.68 mm and 4.05 kg. The complete assembly shall be mounted on two vertical stainless steel 304 posts of 50 mm diameter SS Pipe S40 3.91 mm and 5.44 kg; each welded to a 200 mm x 200 mm x 6 mm stainless steel 304 base plate at the bottom. The signage shall be installed in such a manner that the minimum bottom edge height from the finished ground level is maintained 1.5 m. The work also includes drilling necessary holes in pipes, angles and flats etc, providing and fixing a stainless steel 304 message plate of the required size and executing the installtion with all necessary labour, tools, materials, transportation, leads and lifts all complete as per the direction of the E IC

Job

30,760

₹1,23,040

2Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

2.1

Nominal concrete 1:3:6 or richer mix (including equivalent design mix)

0.3

cum

2,892.8

₹867.84

3Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

3.1

1:2:4 (1 cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

0.3

cum

23,196.7

₹6,959.01

4Centering and shuttering including strutting, propping etc. and removal of form for

4.1

Foundations, footings, bases of columns, etc. for mass concrete

3.9

sqm

501

₹1,953.9

Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.

sqm

127.3

₹2,291.4