11/EDC(O)/W/2024-25

PART-A

Carriage of following line materials for 11 kv line and Increasing of Distribution Transformer from Store Orai to Pit Site & Carriage of Replaced Distribution Transformer from Pit Site to Store Orai including measuring weiging loading unloading at both ends and proper stacking at safe site.

11/0.4 KV 25 KVA New T/F From Store Orai to Pit Site

11/0.4 KV 100 KVA New T/F From Store Orai to Pit Site

11/0.4 KV 250 KVA New T/F From Store Orai to Pit Site

11/0.4 KV 100 KVA Replaced T/F From Pit Site to Store Orai

PCC Pole 8.5 meter long

STP 11 meter long

ACSR Weasel Conductor

LT XLPE Al Cable 1x240 Sqmm

LT XLPE Al Cable 1x400 Sqmm

LT ABC Cable 3X95+1x70+1x16 Sqmm

PVC/LT XLPE Cable 3.5x240 Sqmm

Earthing Complete for 25/100/250 Kva T/F

11 Kv Pin Insulator with Pin

Lug Al 400 Sqmm

11 Kv Top Channel

11 Kv Dropper Channel

11 Kv MS T-OFF Channel

11 Kv Holding Clamp with nut & bolts

Base Angle for T/F

11 Kv Disk Insulator with fitting

11 Kv Cross Arm with Clamp

11 Kv Suspension Clamp

Dead & Clamp

I Hook with Clamp

11 Kv Fuse Set

PART-B

Erection of the following supports after making of pits as per RESSPO norms & filling of pits by concrete of ratio 1:4:8 (cement brick balast & sand). Fitting of all accessories as pin insulator, disc insulator, disc fitting, v-type cross arm, jointing kit, earth rod, stay wire, stay set, gi wire etc as per estimate Plinthing of support above 300mm ground level by concrete of ratio 1:4:8 (cement brick balast & sand) will be done at the time of erection of pole. Painting of ST Pole structure as per RESSPO norms also (all type of paints, lug, red oxide primer, nut, bolts & grouting material etc. will be provided by contractor).

Installation & Energization of 11/0.4 KV 25 KVA New T/F as per resspo norms

Installation & Energization of 11/0.4 KV 100 KVA New T/F as per resspo norms

Installation & Energization of 11/0.4 KV 250 KVA New T/F as per resspo norms

PCC Pole 8.5 meter long with grouting, earthing concreting of support & stay as per resspo norms.

STP 11 meter long with grouting, earthing concreting of support & stay as per resspo norms.

ACSR Weasel Conductor as per resspo norms.

LT XLPE Al Cable 1x240 Sqmm as per resspo norms.

LT XLPE Al Cable 1x400 Sqmm as per resspo norms.

LT ABC Cable 3X95+1x70+1x16 Sqmm as per resspo norms.

PVC/LT XLPE Cable 3.5x240 Sqmm as per resspo norms.

Earthing Complete for 25/100/250 Kva T/F as per resspo norms.

11 Kv Pin Insulator with Pin as per resspo norms.

Lug Al 400 Sqmm as per resspo norms.

11 Kv Top Channel as per resspo norms.

11 Kv Dropper Channel as per resspo norms.

11 Kv MS T-OFF Channel as per resspo norms.

11 Kv Holding Clamp with nut & bolts as per resspo norms.

Base Angle for T/F as per resspo norms.

11 Kv Disk Insulator with fitting as per resspo norms.

11 Kv Cross Arm with Clamp as per resspo norms.

11 Kv Suspension Clamp as per resspo norms.

Dead & Clamp as per resspo norms.

I Hook with Clamp as per resspo norms.

11 Kv Fuse Set as per resspo norms.

Plinth For 250 Kva T/F of size 2x2x1.5M 1) Cement 14 Bag 2) Fine Sand 3 Cu.mtr 3) Coarse Sand 1.2 Cu.mtr 4) Brick Ballast 0.45 Cu.mtr 5) 1st Class Bricks 600 Nos. 6) Stone Ballast (40mm) 0.4 Cu.mtr 7) MS Channel 125x65mm 46 Kg. 8)MS Twisted bar of size 20mm 40 Kg.

Fancing for 250 Kva T/F as per resspo norms.

M/S ESHU ENTERPRISES

JAY GURUDEV CORPORATION