Certain repairs to fencing including connected works of installation buildings under the AoR of AGE W/S-II and AGE E/S-II under AGE (I) (U) B/R, Delhi Cantt-10

Amount

Dismantling concrete posts or struts (wood,steel or R.C.C.) any section, icluding taking out embeded portion and making good disturbed ground by leveling ramming to true surface complete all as spd and directed.

S&F Angle iron as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc and similar work conforming to FE -290 Gde E-165 complete all as spd .

S&F in repairs galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or typing at crossing with and provision of galvanised MS wire stapples or steel pins etc as directed (each line wire to be measured).

Dismantling chain link fencing including line wires, any mesh size and type of standard (weight n. exc 4.00 kg /sqm) straining bolts fixed with steel or concrete post etc complete

S&F of PVC coated GI chanin link fencing meshing size 75mm x 75mm of 3 to 3.5 mm dia GI wire , fixed with nut bolt , securing and binding with flat iron and angle framing complete (Note : angle frame and nut bolt will be measured and paid separately)

M&L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and change of existing colour including removal of sclaed paint and applying one coats of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of new steel / iron surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified & directed.

S&F in repairs concentrina coil fencing wirth punched tape concertina coil 600 mm dia 10 mtr openable length having 50 Nos rounds per 6 mtr length , spring core wire ( 2.5mm thick) of high tensile strength of 165 Kg/Sqmm with tape (0.52 mm thick and weight 43.478 gm/metre and fixing the same with existing Y shape Angle iron with 6 horizontal R.B.T ( Reinforced Barbed Tape) wire, stud tied with GI Staple sand GI clips to retain horizontal all complete as per direction of Engineer-in-Charge

Excavation in trenches in soil n.exc 1.5 m wide and n.exc 1.50m in depth for foundation, pier holes etc n.exc 10 sqm on plan and getting out complete.

Returning, filling in, including spreading, leveling watering and well ramming in layers not exc 25cm in soft/loose soil al as specified and directed.

Removing excavated material n.exc 50mm and depositing where directed at a level n.exc 1.50 mtr above the starting point al as specified and directed

M&L for cement concrete 1:4:8 type D-2 using 40mm graded aggregate in foundation, filling and mass concrete complete.

M&L for reinforced cement concrete (Nominal mix) type B-1 (1:2:4) using 20mm grared aggregate as in columns, pillars, posts, struts etc complete.

Form work to side of concrete surface rough finished square, rectangular or polygonal as in columns, pillars, posts, struts, and similar work complete all as specified and directed by EIC.

M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cracking, bending, spirally for hopping for columns hookings ends and binding with and incl mild steel wire (annealed) not less the 0.9mm dia or securing with clips complete.

do- but 5mm dia and over upto 10 mm dia in stirrups, spacers and binders complete.

S&F of framed work such as grills, grating, iron gate and doors ornamental and intricate design ect framed and hung as gates including pintle hinges, stops, hand made sliding bolt, handles and similar work confirmng to Fe-290- E-165 complete all as specified and directed by EIC

M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work on concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint over a coat of primer (chalk whiting ) complete all as spd

SAGAR ENTERPRISES

SURESH KUMAR SHARMA & CO