Renovation work of State IT Center Office Building at M.P. State Electronics Development Corporation Limited Area Hills Bhopal

Amount

SHIFTING OF EXISTING WORK STATION : Shifing of existing work stations by dismentelling of top & side wall & refixing at the new place as directed by the Engineering in charge.

SHIFTING OF EXISTING WOODEN PARTITION : Shifing of old wooden partition by dismentelling of frame, ply, sunmica etc & replace/refixing at new place by new GI frame & covered with 12 mm commercial ply finish with 1mm sunmica as approved shade & make by Engineer in charge.

DISMENTELLING OF EXISTING GLASS DOORS : Dismentelling of old Glass door of size 2.1M X .9 M by removing of old Pivot, Floor Spring & finish the floor with new Vetrified tiles of same colour of existing floor.

DISMENTELLING OF OLD ELECTRICAL WORK : Removing of all old Wires, switches, sockets boxes from partition, ceilling & from wall.

Workstation 1 seater with Metal Keyboard tray and CPU Trolley, Overall Size- L-1340mm, W-685mm, Height-1215mm, Working Height-750mm, Worktop Size- L-1200mm, W-600mm, Top made of 25mm thick Pre laminated particle board, All edges covered with 2mm thick PVC edge banding. 70mm Thick Tiles Base Partition- Internal Frame are made by 1.6mm thk. cold rolled close annealed powder coated Sections. Tiles are made by 12mm. Thk. Pre laminate particle board. Tiles are also available in Glass, Fabric and Steel option. Frame structure are fabricated by MIG/TIG welding Machine. Tiles are fitted by high strength PVC Dowel in PVC Insert with transition fit. provision of Slot for cabling and accessories. upper and side trim are 1mm thk. extruded powder coated aluminium section and Pole is 1.6mm Thick Aluminium. Make-CSPL/Godrej/wipro/ HermanMiller/Bontone/HOF.

SDU with Drawer- Size: Height:750mm, Width:900mm, Depth:400 mm. Body part made-up of prime quality cold rolled close annealed Sheet Use only MIG/TIG & Spot welding for fabrication. Top made of 18mm thick Pre-laminated Particle Board. Side Edges covered with PVC edge band on edge bending machine. Provision of drawer below table top with telescopic channel. Superior Quality make lock. PVC handles. Doors in cold rolled close annealed M.S. Sheet. Doors are Top hung slide on roller bearing. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface. The overall appearance of the product shall be as per photograph. Make-CSPL/Godrej/wipro/ HermanMiller /Bontone/HOF.

SDU-1200- Size: Height:1200mm,Width:900mm, Depth:400mm Body part made-up of prime quality cold rolled close annealed Sheet Use only MIG/TIG & Spot welding for fabrication. Top made of 18mm thick Pre-laminated Particle Board. Side Edges covered with PVC edge band on edge bending machine. Door set make lock. PVC handles. Doors in cold rolled close annealed M.S. Sheet. Doors are Top hung slide on roller bearing. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface. The overall appearance of the product shall be as per photograph. Make-CSPL/Godrej/wipro/HermanMiller /Bontone/HOF.

Ergo Low Back- Size: Total Height: 830-930mm, Depth:600mm, Width: 550mm Seat Height: 450-550mm. 5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Hot pressed ply wood with steel T-Nuts for rigid fastening. Sturdy steel column gas lift for centre support and seat height adjustment. Telescopic ABS cover over steel column. Lockable centre tilt mechanism and with Single piece integral skin PU arm rest. Quality tapestry with PVC beading all around. High density Moulded PU cushion. Upholstery 1.5 Mtr. Over all appearance of product as shown in picture. Make-CSPL/Godrej/wipro/Herman Miller/Bontone/HOF. Note:- The Bidder Shall quote his own rates for item rates.

Bidder Name

Amount

BONTON TECHNOMAKE PRIVATE LIMITED(GSTN-23AABCB4237A1ZH)