Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.0 LAccepted-AOC | ₹10.0 L | L1 | Accepted-AOC Being L1 bidder |
| 2 | L2₹14.6 L+₹4.6 L (45.7%)Rejected-Finance | ₹14.6 L+₹4.6 L (45.7%) | L2 | Rejected-Finance Being other than L1 bidder |
| 3 | L3₹18.4 L+₹8.4 L (83.5%)Rejected-Finance | ₹18.4 L+₹8.4 L (83.5%) | L3 | Rejected-Finance Being other than L1 bidder |
| Sl No | Description | Qty | Unit | M/S PARSHOTAM KUMAR GUPTA L3 | RUKSANA KOSSER CONTRACTOR L1 | Sanjeev Kumar Verma L2 |
|---|---|---|---|---|---|---|
| 1.00 | Drilling bores of 250mm dia using DTH rigs with ODEX attachment in collapsible strata, congiomerates, boulders, pebbles, oily clay etc including cost of T&P, consumable stores, bits, water, POL with system of simultaneous lowering of casing pipes from 0 to 60m depth, complete all as specified and directed. | 60 | Rm | 9,000 ₹5,40,000 | 1,900 ₹1,14,000 Lowest | 5,800 ₹3,48,000 |
| 2.00 | Drilling bores of 250mm dia using DTH rigs with ODEX attachment in collapsible strata, congiomerates, boulders, pebbles, oily clay etc including cost of T&P, consumable stores, bits, water, POL with system of simultaneous lowering of casing pipes from 61 to 102m depth, complete all as specified and directed. | 42 | Rm | 9,500 ₹3,99,000 | 2,100 ₹88,200 Lowest | 6,000 ₹2,52,000 |
| 2.01 | Note for Ser Item No 1.00 & 2.00 above:-
(i) The required yield of borewell is 100 LPM.
(ii) Rate quoted by the contractor shall include cost of transportation of T&P, POL used and necessary site clearance required for mounting Rig.
(iii) The depth may, however be ordered in writing to be varied by the Engineer-in-Charge upto a maximum of 25% of the total depth considered above.
(iv) If GE decides that suitable water bearing strata is not available in the aforesaid bore or the boring cannot be continued further on account of the type of strata. GE may order the contractor to bore at other site.
(v) GE shall give three Number of locations to the contractor for borewell, no extra charge shall be admissible to the contractor on this account.
(vi) The abandoned bore well shall be refilled with earth after extracting the T&P. The cost of abandoned bore well shall be admissible to the contractor @ 5% of quoted rate of item per meter. | - | - | - | - | - |
| 3.00 | Development of bore hole with compressor of minimum capacity 900 CFM/ 250 PSI and testing of yield with pumping out till clear & sand free water is obtained from the bore by 'V' notch as per IS-2800-1979, running of compressor for 15hrs and thereafter if required, pumping with over capacity submersible pump set, complete all as specified and directed.
Note :- (i) The cost of yield test and testing of water sample from Govt approved Lab/ Regional Research Lab to confirm potability of water as per IS 10500-2012 shall be deemed to be included in the unit rate .
(ii) All equipment shall be arranged by the contractor at their own cost and nothing extra claim is admissible on this account.
(iii) The cost of gravel initially poured in packing around the tube and amount of gravel added during development, if any, shall be included in the quoted rate of this item. | 1 | Each Job | 45,000 ₹45,000 | 38,000 ₹38,000 Lowest | 40,000 ₹40,000 |
| 4.00 | Supply, lowering and fixing MS ERW casing pipe internal dia 200mm and 8mm thick including special fittings, MS collars and field V-butt welding joints as per technical requirement of ODEX attachment conforming to IS 4270:2001 (latest revision), complete all as specified and directed. | 99 | Rm | 5,000 ₹4,95,000 | 2,900 ₹2,87,100 Lowest | 3,200 ₹3,16,800 |
| 5.00 | Supply, lowering of stainless steel 'V' wire wrapped wedge wire screen pipe of internal dial 200mm 'K' type/ standard construction, having slot opening size of 0.50/ 0.75 mm conforming to IS 8110, inside the tube well assembly in the manner with top of the assembly, complete all as specified and directed. | 3 | Rm | 7,000 ₹21,000 Lowest | 12,500 ₹37,500 | 8,000 ₹24,000 |
| 6.00 | Supply and clamping of casing pipe assembly with clamps fabricated out of MS flat iron of size 100mm x 10mm (thick) fixed with 16mm dia nuts bolts & washers, complete all as specified and directed. | 1 | Each Job | 2,000 ₹2,000 Lowest | 7,300 ₹7,300 | 3,000 ₹3,000 |
| 7.00 | M&L for collection & preservation of strata samplers in polythene bags during drilling and finally to be kept in teakwood box of suitable size with compartments for every 3mtr depth sample, duly framed and marked, complete all as specified and directed. | 1 | Each Job | 6,000 ₹6,000 | 8,000 ₹8,000 | 5,000 ₹5,000 Lowest |
| 8.00 | S&F heavy duty forged steel ODEX drive shoes suitable for 200mm internal dia ERW casing pipe assembly, matching with the 250mm DTH ODEX rig attachment, complete all as specified and directed. | 1 | Each Job | 2,000 ₹2,000 Lowest | 31,000 ₹31,000 | 5,000 ₹5,000 |
| 9.00 | S&F suitable casing drive shoe suitable for 200mm dia and bit tube as per requirement of depth or ODEX attachment, complete all as specified and directed. | 1 | Each Job | 2,000 ₹2,000 Lowest | 12,000 ₹12,000 | 6,000 ₹6,000 |
Tender Value
₹14.7 L
EMD Value
₹30,000
Closing Date
23 Jul 2026, 6:00 pmClosed
GE 862 EWS
GE 862 EWS PIN-914862 c/o 56 APO
PROVN OF BOREWELL AT UPPER NARIAN (BHAIRAV) UNDER GE 862 EWS
2026_MES_773113_1
GER-39/2026-27
Open Tender
Civil Works
Item Rate
180 days
GE 862 EWS
As per NIT
9 documents required · 9 mandatory
₹500
GE 862 EWS
₹30,000
Yes
6 Aug 2026
18 Jun 2026
27 Jul 2026
18 Jun 2026
23 Jul 2026
10 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Drilling bores of 250mm dia using DTH rigs with ODEX attachment in collapsible strata, congiomerates, boulders, pebbles, oily clay etc including cost of T&P, consumable stores, bits, water, POL with system of simultaneous lowering of casing pipes from 0 to 60m depth, complete all as specified and directed.
Note:- (i) Rate quoted by the contractor shall include cost of T&P & POL etc and consumable.
(ii) In the case, the required yield of water is not met as per requirement of CGWB department report, the bore shall be abandoned and refilled after extracting the T & P. The cost of abandoned 03 Nos bore shall be admissible to the contractor @ 5% of quoted unit rate of item per metre depth after approval of Accepting Officer and no extra claim shall be admissible on this account. The contractor shall further bore on site as selected and decided by GE. | 60 | Rm | - | - |
| 2 | Drilling bores of 250mm dia using DTH rigs with ODEX attachment in collapsible strata, congiomerates, boulders, pebbles, oily clay etc including cost of T&P, consumable stores, bits, water, POL with system of simultaneous lowering of casing pipes from 61 to 180m depth, complete all as specified and directed.
Note:- (i) Rate quoted by the contractor shall include cost of T&P & POL etc and consumable.
(ii) In case the required yield of water has not met as per requirement of CGWB department report, the bore shall be abandoned and refilled after extracting the T & P. The cost of abandoned bore shall be admissible to the contractor @ 5% of quoted unit rate of item for per mtr depth after approval of Accepting Officer and no extra claim shall be admissible on this account. The contractor shall further bore on site as selected and decided by GE.
(iii) Please also note that boring if required more than 180m depth at site condition the same shall be paid under this item without any extra claim. | 42 | Rm | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.37 MB
BOQ_865691.xls
BOQ • 0.36 MB
TD.pdf
Tender Documents • 0.61 MB
Corrigendum1.pdf
PDF • 0.17 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .