Earthwork for excavation of trenches for laying of HDPE UGPS at STP MALUKA Tehsil Phul and District Bathinda

Proof of Enlistment in Class I/A, II/B, III/C or IV/D with Department of Soil and Water Conservation, Punjab or Department of Water Resources, Punjab or in any other Govt Department in State/Country in appropriate Class with amounting to similar or more than DSWC enlistment limit.

Bank Solvency of 40% of amount of tendered work from scheduled bank. Minimum 20 % of the solvency amount should be available in the form of capital or liquidassets or availability of credit facilities.

List of Essential Machinery on ownership/lease basis

List of Essential Technical Staff

Requisite Bid Capacity

Email id of Bidder

Item of Work

Words

Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation, watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards,Earth work upto 1.5 m. Depth for All classes of soil except rocky

Providing, Laying, fixing & jointing of ISI Marked H.D.P.E. Pipes as per ISI - 4984- 1995 casting along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.H.D.P.E 140 mm o/d pipe of 4 kg./cm2 PE-80

Supplying, fixing and jointing H.D.P.E pipe's specials complete as desired by Engineer-in-Charge.For pipe lines laid outside habitation & in the open area/ field 2% Extra will be taken for the respective i/d of pipe.) 2% of 28.15(E)(F)

Supply & Installation of Alfa-Alfa valve (HDPE) 140 mm. Dia.Anti Theft Mechanism

Providing & fixing single air valve ISI Marked as per IS-14845 including jointing all carriages complete.C.I Double air valve (Size 50mm)(For 180 mm dia HDPE PIPE)

Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) B Class, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete.Supply & Jointing of 50 mm. Dia. G.I. Pipe(3mts for each ARV )

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-1800, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge). Class PN-1 as per ISI 150mm i/d Sluice Valves flanged

Providing and fixing ISI Marked Non-Return Valves Flanged end class PN-1.0 as per IS:5312/1804 in pipe lines including jointing & cost of nut bolt, rubber insertion etc. complete. Note : If non return valve class PN-1.6 is used instead of class PN-1.0, than 5% will be paid extra. Class PN-1.0 as per ISI with gun metal flap, 150 mm i/d Non- Return Valve

Constructing brick masonry manhole in cement mortar 1:5 ( 1 cement : 5 coarse sand) R.C.C. top slab 20cm thick using M-20 mix by using mixer and vibrator, TMT Fe500 @80.00 kg/per cum, foundation concrete 1:4:8 mix (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making 40mm thick Manhole covers in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, Orange coloured PVC steps including RCC cover with frame complete as per standard design complete in all respects. Inside size 90x150 cm and 120 cm deep

KSB make non clog sewage Submersible pumpset having discharge 15.43 LPS at 25 mtr with 9.33 kw/12.5 h.p 1440 rpm 415 Volt,50Hz MOC Pump CI Casing,CI Shaft,SS impellorand coupling including GST@18%, sunderies. Contractor's profit and labour cess

Providing and Fixing of Drive suitable for 12.5 hp Pump set fitted with L&T Switchgear fitted in MS Powder coated Box inclusing GST@18%

P/f of 4inch MS Bend Plain End

MS Flanges 100mm

Supply of suction pipe 4 inch pipe MS b class

Providing and Fixing of hand hole

Supply of Nut bolt

Installation of Horizontal Pumpsets

Fixing of delivery & suction complete, welding at site etc

MS plate form with wooden top 20' long 2 1/2 wide with railing on one side

Delivery pipe 4 '' C-Class ISI

Fabrications and fixing Gantry

Kit-Kat set 200Amp. With board

Making Cable Connection for Kit-kat to Panel and Panel to motor including cost of cable, labour and Thimbles

XLPE INSULATED ARMOURED CABLES (LOOSE):-Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS 7098 (Part- 1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-

MINIATURE CIRCUIT BREAKERS: Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-

RCCB's:Supply and erection of RCCB (Residual Current Circuit Breaker) for Earth leakage protection suitable for 240/415 volts 50 cycles AC supply with breaking capacity of 10kA as per IEC 61008-1 in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs

Sump well and pump room will not be contructed separately as treated water from STP's existing outlet/storage tank/chlorination tank will be used for irrigation purpose using submersible pumpset system as mentioned above.

Riser 600mm

Total

600 mm Gate valve

Total

Silt Detention (Haudi)

Plain Cement Concrete 1:2:4

per cum

Cement Plaster 10mm

Total

# of occurrences