Renovation and Beautification of all the parks in Ward 20 Zone 1 MCG

Amount

NS Item

"Double Cross Walker/ Cross trainer double:- Providing, and fixing Double Cross Walker of size 1600 X 600 X 1600 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40 mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Officer -in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength N425 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc." The rates are inclusive of all taxes like GST, Transportation, Installation in CC with 2 years defect liabilty period free of cost to full satisfaction of engineer in charge complete in all respect.

Providing laying grit wash consisting of 12mm coarse sand plaster and 5mm to 10mm Narnaul/ Dehradun etc. quarry mix with in 3 parts of cement

Merry-Go-Round (4 seater): 5' Dia. Main frame is of m.s sq. pipe 2" x 2" x 14 G and having suitable handle & foot-rest is of m.s round pipe 3/4" x 12 Gauge. Central pipe is of m.s pipe 3" x 12 G which further supports with m.s pipe 1” x 12Gauge with heavy duty shaft 50 mm thick & ball bearing assembly. It consists of 4 no Chair made of Molded FRP Plastic in 3mm thick with suitable PU Primer & PU Paints. Complete item with GST, Transportation, Installation with C.C & labor at site.

Making & providing of customized statue/sculpture of Shahid Bhagat Singh weather proof, dust proof and slightly acid/chemical proof made of marbel & fiberglass of as per drawing and design approved by Engineer-in-charge including all type of taxes like GST, Installation and Transportation, fixing at site complete in all respect.

Providing Plumeria alba dwarf of plants height 90-105 cm with 3-4 branches and thick stem in big size HDPE bags complete in all respect.

Providing Agle marmelos plants height 150-165 & 2" -3" girth complete in all respect.

Providing and fixing of Gate valve for Hydrant connection.

Leg Press: Providing designing and fixing of leg press of size 2000x550x1600 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipes 40mm dia and 2.5mm thick. All pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micror thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars to be provided with high quality grip rubber on top end Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact of injury Seat and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 3mm colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free duly oil sealed and selt lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitteed with in inbuilt limiters to prevent unwanted movements. All open ends of pipe to be closed by GI/ LLDPE caps for user safety. The equipments to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set fix the equipments on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of engineer in charge regarding material shape of equipment colour on metal seat and base cover plate and fixing of equipments etc (the cement concrete and excavation work shall be paid for separately).The rates are inclusive of all taxes like GST, Transportation, Installation in CC with 2 years defect liabilty period free of cost to full satisfaction of engineer in charge complete in all respect.

FRP Dustbin (Tilting Type) of capacity 60 LTR. Body is made of moulded fiberglass re-inforced plastic of 2mm thick having its lid with handle. It fitted with m.s square pipe 1.25” x 1.25” x 14 gauge & m.s flat 50 x 5mm, 30 x 5mm base structure with suitable PU Paints. Complete item with GST, Transportation, Installation with C.C & labor at site.

Multi Play Spiral-N-Tunnel Station Item code: ME-03 Covering Area: 30’L x 20’W It contains: FRP Spiral Slide 6mm thick inclined at 5’H – 1 no FRP Tube Slide inclined at 5’H – 1 no FRP Wave slide 6mm thick inclined at 5'H - 1 no FRP Bowl slide 6mm thick with FRP Entry Gate inclined at 3’H – 1 no FRP Stair 3mm thick inclined at 3’H- 1 no FRP Platform Hex. Shape 5mm thick in 7’Dia – 2 no. FRP Canopy – 2 no. FRP Deer Figure on canopy – 2 no. FRP Fancy Railing Frog & Monkey Shape – 4 no. FRP Walking Bridge 7.5’ Long – 1 no. M.S Spring Climber – 1 no. M.S Zig-Zag Climber – 1 no M.S Chain Net Climber – 1 no M.S Climbing Ladder – 1 no M.S Station in which vertical m.s pipe is of 3” x12G of I.S.I Mark – 2 no. The rates are inclusive of all taxes like GST, Transportation, Installation in CC with 2 years defect liabilty period free of cost to full satisfaction of engineer in charge complete in all respect.

Providing and Displaying Cyprus Golden Conical Shape 150 to 165 cm ht., with fresh and healthy Golden colour foliage in 35cm Cement Pot as per direction of the officer-in-charge.

Providing and Displaying Topiary of Ficus Nuda well developed with fresh & healthy foliage from Top to Bottom with single piller 75 to 90 cm spread,195 to 210 cm ht. in 35 cm HDPE Bag/Cement Tray /Cement Pot as per direction of the officer-in-charge.

"Providing and Displaying Topiary of Ficus Panda well developed with fresh & healthy foliage with 3 to 4 Ball and 60 to 75 cm spread each Ball, 135 to150 cm ht., in 35 cm HDPE bags /Cement Pot as per direction of the officer-in-charge."

Providing and Fixing Public Information Board consisting of 75mm G.I pipe of size 2.45 m * 1.15 m with 900 mm * 900 mm G.I sheet of 16 gauge connected/welded with 5mm thick steel plate of duly painted as per column mention in drawing and fixing at site in 60*60*75 cms cement concrete in 1:2:4 block complete in all respect.

Supply & fixing of Precast Concrete Tree guard (Consist of four panels) of size Height 1800mm, width 300 x 600mm. Thickness 35mm Manufactured by M-30 grade of concrete with suitable reinforcement to avoid breakage as per drawing enclosed with carriage, loading & unloading with fixing and all type taxes including 18% GST and defect liability of 6 months complete in all respect to full satisfaction of engineer-in-charge

Providing Mimusops elengi (Maulsri) of plants height 180-195 cm well developed with thick stem in big in big size HDPE bag 2"-3" complete in all respect.

Wave Slide: 9’.5 L x 5’H. Wave slide is of molded Fiberglass Reinforced Plastic (FRP) of 6mm thick and climbing ladder is of m.s pipe 1” x 12 gauge & m.s rectangular pipe 65 x 25 mm box X 16 gauge as climbing steps which support with 1”.25 sq. pipe x 14 Guage with suitable PU Primer & PU Paints. Complete item with GST, Transportation, Installation with C.C & labor at site including defect liability period of 1 year free of cost complete in all aspect.

Supply of Hedges and Edge Plants (N.S) as per details. Plant must be healthy and well grown, height between 0.8 m to 1.2 m Golden duranta

(i) 6 No. Ornamental Design FRP Molded Pillar FRP base pedestal with vertical fitted design having base width of size 260mm x 260mm and height 900mm having 4 no. of size 20mm drilled in the base with hold fasts and having B class vertical m.s pipe of size 88 mm and height 2890mm, the central m.s pipe holds FRP Molded taj 6no of size 260 x 260 x 210mm high suitably mounted at appropriate height complete as per design. Complete pillar suitably grinded and subsequently spray painted with two coats of P.U Paints in required shade. (ii) 12 No. spndred and 6 no. Friezes Floral and Ornate decorative design combination of spandrel and frieze, matched to be suspended between two m.s pillars as per the design. The spandrel (L-Bracket) having length 420mm and height 400mm the frieze (Top Panel) height 250mm and length as per the size of the gazebo. The frieze mounted on m.s tabular pipe frame of size 50mm x 25mm, frieze properly welded to the column pillars at either ends. Complete set of spandrel & frieze uniformly grinded spray primered, spray painted with P.U Paints. (iii ) 3 No. cast iron/frp base panel railing with frame Floral and Ornate decorative design cast iron/frp side railing panel as per design having height of 730mm and length as per size of Gazebo. Each panel top and bottom mounted with mild steel tubular pipe frame of size 50 x 25 mm. The bottom mild steel pipe having 2 nos. of hold fasts in m.s pipe of size 40 x 40mm and length 250mm welded at the base to hold the panel in the ground. Every panel length is as per the gap between the two pillars. The complete railing panel grinded for neat surface finishes spray primered and subsequently spray painted with P.U Paint in required shade. (iv) One set of top frame with Double Finishing FRP Molded Plastic Sheet roof Top frame in m.s tubular pipe of size 40 x 40mm properly welded and grinded. The top frame mounted with FRP molded Sheet of 4 mm thick with top & bottom good finishing (Double finishing sheet) to make it rust proof bent to profile of size 245mm width in -Z- section on either ends fixed horizontally along the length between column pillars. Also it contain FRP Moulded Ball of 14”Dia x 2mm thick at the central top for its beautification. Each sheet enamel painted in red color. Each such sheet properly riveted to horizontal sheets. The complete item is fitting at site with installation. (Including fixing at site and supervision & transportation & all type taxes).The rates are inclusive of all taxes like GST, Transportation, Installation in CC with 2 years defect liabilty period free of cost to full satisfaction of engineer in charge complete in all respect.

SUPPLY OF PRECAST CONCRETE RCC BENCHES HAND REST OF SIZE 1500MM MANUFACTURED BY M-30 GRADE OF CONCRETE. CONCRETEPLANKS IN RED COLOUR SIZE MMX400MMX50MM AND 1NO.OF CONCRETE PLANK IN RED COLOUR SIZE 1500MMX 425MMX50MMEACH BENCH CONSIST OF 2 NO.L SHAPE BASE FOR IN GREY CEMENT COLOUR THICKNESS 80MM BACK HEIGHT 890MM FRONT HEIGHT 450MM SITTING LENGTH OF BENCH 1500MM SITTING HEIGHT 450MM TOTAL HEIGHT 890MM.Manufactured by M-30 grade of concrete with suitable reinforcement to avoid breakage as per drawing enclosed with carriage, loading & unloading with fixing and all type taxes including 18% GST and defect liability of 6 months complete in all respect to full satisfaction of engineer-in-charge.

Description of Fountain in Dholpur stone (Red Stone) of size 12' dia complete in all respect. Plate (Down) 1. 5'-0"x5'-0"x12'-0" 2. 48"x48"x12" 3. 36"x36"x10" 4.24"x24"x7" Rutter (Down) Under Plate 1.20"x20"x36" 2. 15"x15"x20" 3. 13"x13"x18" 4. 12"x2"15" 5. 10"x10"x15" 12' dia out side boundary of fountain with Dholpur outside and top and 1st quality ceramic glazed wall tiles in side. Including 1 HP Motor, water connection, electricity connection Market Rate+ GST+ Transpotation, Labour for fixing+ 10% Contractor Profit and defect liability period free of cost for 2 years complete in all aspect.

Providing Plumeria rubra of plants height 120- 150 cm with 3-4 branches and thick stem in big size HDPE bags complete in all respect

Providing Delonix regia (Gulmohar) plants height 150-165 cm in big poly bags of plants size 25 cm girth 2"-3" complete in all respect.

Providing and Fixing mono block 1 HP motor Texmo make including GST, installation complete in all respect.

Supply of Hedges and Edge Plants (N.S) as per details. Plant must be healthy and well grown, height between 0.8 m to 1.2 m Murraya Koenigii

Victorial Steel sitting bench of size 61"(L)x29½” (H)x 18½” (D). Seat with 5 steel pipe and back with five steel pipe of size 47mmx23mm rectangular of 16 gauge ISI mark e.r.w. spl. Pipe fixed with C.I. frame on both sides with durable nut-bolts duly welded to protect it unscrew. All duly anti rusting Red Oxide primered before P.U. bus green spray paint coating long lasting.Weight of each bench minimum 43 k.g. (Including all taxes)

"Pull Chair:- Providing, and fixing of Pull pair of size 2500 X 800 X 2000 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40mm dia and 3.0 mm thick all pipes made up of hot roiled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc .primer paint to be applied at all welding points prior to finishing. Pedals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be' made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Officer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GULLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc." The rates are inclusive of all taxes like GST, Transportation, Installation in CC with 2 years defect liability period free of cost to full satisfaction of engineer in charge complete in all respect.

Seated chest press: Providing designing and fixing of seated chest press in a pair of size 1800 x 700 x2000 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipes 40mm dia and 2.5 mm thick. All pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact or injury. Seats and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 3mm colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/ LLDPE caps for user safety. The equipment to be fixed on ground with concrete or minimum strength M-25 and J shape welded bolt and once the concrete is set, fix the equipments on to it and cover with the base plate. All complete as per direction and approval of engineer in charge regarding material shape of equipment colour on metal seat and base plate and fixing of equipments etc The rates are inclusive of all taxes like GST, Transportation, Installation in CC with 2 years defect liability period free of cost to full satisfaction of enginner in charge.

"Knee HIP Raise:- Providing, and fixing Knee Hip Raise of size 1105 X 550 X 11480 mm make of Green Gym or Equivalent fabricated with main post of 140 rum din and 3.0 mm thick rest or the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Mao Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. PadaIs shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Officer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Officer-in-Charge regarding material, shape of equipment, colour on metals_sea and htme pnver plate and fixing of equipment etc." The rates are inclusive of all taxes like GST, Transportation, Installation in CC with 2 years defect liabilty period free of cost to full satisfaction of engineer in charge complete in all respect.

"Twister:- Providing, and fixing Twister of size 1700 X 1300 X 1300 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Officer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and ishapod welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Officer -in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of. equipment etc." The rates are inclusive of all taxes like GST, Transportation, Installation in CC with 2 years defect liabilty period free of cost to full satisfaction of engineer in charge complete in all respect.

Prividing and fixing of Yucca plant for the Ht. 2.5' to 3' in HDPE bags

Supply of Ficus panda of height 45-60 cm. with 6-7 branches and healthy foliage in polybag of size 25 cm as per diraction of officer-in-charge

Providing and fixing of SS gate and SS Grills 304 Grade as per design as required at the site to the full satisfaction of Engineer-in-charge

Chain Swing (2 seater): 10’L x 5’.5W x 8’.5 H. Horizontal frame & vertical legs is of m.s pipe 2” x 12 gauge. It stays with m.s pipe 1” x 12 gauge. Swinging seats-2 nos is of FRP molded Seat of 2mm thick fitted with m.s pipe ½” frame x 12 gauge which hang with m.s chain 6mm thick duly plated with ball bearing & m.s flat 6mm thick housing with suitable PU Primer & PU Paints. Complete item with GST, Transportation and installation with CC at site to full satisfaction of engineer in charge.

Providing Azadirachta indica (Neem) of plants height 120 -130 cm in big polybag of plants size 25 cm. girth 2" -3" complete in all respect.

Supply of RH Pipe 1" dia.

Providing and fixing 3/4"dia Hydrant connection

Providing Clerodendrum splendens plant of height 30 cm to 45 cm in 20 cm size of Earthen pots/ Plastic pots

Bidder Name

Amount

M/s Sami Greenmax Landscape Pvt. Ltd.(GSTN-06AAPCS4484A1Z9)

M/s Lakshay and Company(GSTN-NA)

M/s Lakshay and Company

M/s Lakshay and Company