SPECIAL REPAIR TO ROAD OF JCOs ACCOMMODATION IN MANEKSHAW ENCLAVE UNDER GE (W) JABALPUR

Amount

Repairs to pot holes any depth, not exc 1 Sqm each including sweeping free from dust and mud or water, scoring sunken surface in roads, paths etc cutting around edges to least 50mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed.

Repairs to pot holes any depth, not exc 1 Sqm each including sweeping free from dust and mud or water, scoring sunken surface in roads, paths etc least 30mm in depth, making good by applying tack coat @ 5 Kg per ten sqm, putting in premixed bituminous macadam, well rammed and shield with binder 9.8 kg per 10 Sqm, blinded with 0.09 cum of stone chipping, 6.3mm size and again well rammed (including supply of premixed macadam, binder and chipping) depth of pot holes exc 30mm complete all as specified and directed.

Scarifying of old bituminous surface/gravelled macadam n exc 50 mm deep, macadam or bituminous macadam surfaces in area exc 400 sqm complete all as specified and directed.

Scraping or picking gravelled exc 50 mm deep, macadam or bituminous macadam surfaces in area n exc 400 sqm complete all as specified and directed.

M&L Water bound macadam (WBM) 15 cm thick (in two layers of 7.5cm thick each layer) (compacted thickness) with crushed stone aggregate of grading II (63 to 40 mm size) ( Granite, trap or basalt), spread, rolled with 8 to 12 tonne power roller and consolidating to required gradient and camber, complete all as specified and directed.

M&L Water bound macadam (WBM) 7.5 cm thick in one layer (compacted thickness) with crushed stone aggregate of grading II (63 to 40 mm size) ( Granite, trap or basalt), spread, rolled with 8 to 12 tonne power roller and consolidating to required gradient and camber, complete all as specified and directed.

M&L Water bound macadam (WBM) (except material) of 7.5cm thick each layer (compacted thickness) with crushed stone aggregate of grading II (63 to 40 mm size) ( Granite,Trap or Basalt), spread, rolled with 8 to 12 tonne power roller and consolidating to required gradient and camber, complete all as specified and directed. Note - Material obtained from scraifying will be used for WBM

M&L for Preparing of unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with Mechanical Compressure to remove all loose dirt etc, and applying evenly with mechanical sprayer a priming /tack coat with bitumen (VG-10,Bitumen confirming to IS 73-2006) @ 10 kg/10 sqm complete all as specified and directed.

M&L for Preparing black top surfaces by brushing with wire brushes for re-moving caked mud etc, sweeping with brooms and finally fanning the cleaned surface withMechanical compressure to remove all loose dirt etc. and applying evenly a priming/ tack coat with bituminous emulsion @ 5 kg per 10 sq metres using mechanical sprayer complete all as specified and as directed.

M&L Premixed bituminous, macadam laid/rolled and compacted to required gradient and camber with paving bitumen @ 4% by the weight of total mix bitumen of grade VG-30 (consolidated thickness 75mm thick or less or as required) complete all as specified and directed.

M&L for laying bituminous premix asphaltic semi dense concrete 30 mm consolidated thickness with 5.5% binder content by weight of total mix bitumen of grade VG-30, with using asphalt mechanical mixer plant & consolidated with 8 to 10 ton power road roller to required level gradient, camber and super elevation complete all as specified and directed..

M&L for laying 30mm Bituminous premix asphaltic dense concrete 30mm consolidated thickness with 6% binder content (VG-30) by weight of total mix, rolled and compacted with 8 to 12 ton power road roller to required level gradient, camber and super elevation complete all as specified and directed.

M&L for Preparation of road surfaces and applying thermoplastic reflective paint in marking of minimum 1.5 to 2mm thick single coat as in center line and edge line road marking of 150/100mm width using 'HOT MARK' thermoplastic modern propelled road marking machine as directed including all ingredients such as blinder, glass beads Titanium dioxiide calcium carbonate inter fillers thermoplastic requirment for glass beads shall be the table No 800.4 of MORTH specification including spraying of glass beads etc all as per manufacturer's instructions complete all as specified and directed.

S&F in repairs, cat eye reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector fixed with and incl MS stud of suitable size as per manufactures instructionsand to be fixed with Epoxy- Resin based adhesive or Special Hot Melt Bitumen adhesive avoiding nails etc complete all as specified and directed.

S&F in repairs solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd complete all as per manufacturer's instructions etc. complete all as specified and directed.

S&F in repair 100% water proof metal tubular solar delineator (as per IRC 79-1981) made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed

M&L for moorum/ red bajri, spread, rolled and consolidated to gradient and camber as required, by 8 to 12 Ton power roller complete all specified and directed. Note:- (i) Compacted thickness shall be measured and paid. (ii) Rolling/ compaction shall be done by roller only.

Taking down Cross drainage rain water pipes ,AC/PVC pipes of any size or pattern including all fittings etc complete all as specified and directed.

S&F, 150mm bore PVC (SWR) pipes single socketed in any length laid in floor / trenches in required gradient complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) and removing debris from the premises complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Mild steel framed work such as grills, grating, etc with ends of bars shouldered and /or rivetted or forged into spikes and similar work conforming to Fe-290 Gde-E-165, complete all as specified.

Dismantling Stone slabs and tiles of any description or thickness laid dry in floors, aprons etc. all as specified and directed

M&L for 100 mm thick PCC (1:4:8) type D-2, (using 40 mm graded stone aggregate) as in sub base of floor etc including ramming/tamping and finishing top surface even and fair complete all as specified and as directed.

M & L for 60 mm thick, M-35 Grade coloured precast concrete Paver block with grey cement and pigment, conforming to IS 15658-2006, including interlocking at side by tamping using wooden mallet and fixed, over and including 50mm thick sand cushioning complete all as specified and as directed. .

Refixing of old paver block of any thickness including levelling interlocking at sides and temping by using wooden mallet over sand cushioning complete all as specified and as directed. ( Note : Old serviceable paver block retrieved against dismantling shall be re-used)

M & L for Factory made precast PCC blocks (1:2:4) type B-1, (using 20mm graded stone agg) as in kerb stone including rounding/chamfering and finished exposed surface even and smooth and set in CM 1:4 complete all as specified and as directed.

M&L for PCC (1:2:4) type B-1 (using 20 mm garded stone aggregate) as in coping, bed plate, and the like including weathering, slightly rounded or chamferred angles and throating as directed including provision of necessary form work and finishing exposed surface even and smooth without using extra cement, complete all as specified.

M&L 15mm thick Rendering in CM 1:4 on brick or concrete surfaces, including finishing even and smooth without using extra cement, complete all as specified and as directed.

M&L for PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

S&F in repair 300mm dia (bore) RCC Hume pipes class NP-3 laid to slope and jointed in cement morter (1:1) complete with collars complete all as specified and as directedspecified.

M&L for forming fair finished drain or channel 30 cm inner girth over cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed

Add or deduct for each 25 mm girth or part thereof over or under 30cm ditto complete all as specified and directed

Dismantling of brick masonry work, built in cement mortar of any description including all quoins, arches, pillars, etc, complete all as specified and directed.

M&L for brick masonry works straight or curved on plan exc 6m mean radius built in cement mortar (1:4) using FLY ASH old size sub class "B" Bricks complete all as specified and directed.

All as above but except brick ( Note : Serviceable bricks retrieved against dismantling shall be re-used )

Taking down cement plaster on wall/ceiling/roof etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed.

Excavation in treanches n exc 1.5m wide and n.exc 1.50 m in depth and getting out for foundation, etc or for shafts, wells exc 10 sqm on plan in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed.

M&L for preparation of old painted concrete/plastered surfaces of any description over 10 cm in width or girth and apply Two coat of synthetic enamel paint in required colour/ shade including making good old surface by using water proof putty complete all as specified and directed.

M&L for Preparation of new plastered surface and applying two coats of synthetic enamel paint over a coat of primer including preparation of surface by using water proof putty complete all as specified and as directed.

Preparation of plastered or unplastered new surface of wall and applying two coats of cement base paint complete all as specified.

Schedule of credit amount of Rs 45200.00 to be deducted during AOC

M/s PARASRAM MULCHANDANI

Mahaveer Engineering Co.

KESHAV ENTERPRISES