REPAIRS TO KITCHEN, BATH, WC, SUNKEN FLOOR AND

Amount

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation, pipeline etc area not exceeding 10 Sqm on plan and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling in, including spreading in layers not exceeding 25cm, levelling, watering and well ramming as in soft/loose soil complete all as specified and as directed.

Removing excavated material to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above starting point complete all as specified and as directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

Demolition of unreinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for plain cement concrete (1:2:4) type B-1, (using 20 mm graded stone aggregate) as in coping complete all as specified and as directed.

M&L for PCC (1:4:8) type D2 (40 mm graded aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.

M&L for 40 mm thick plain cement concrete, (1:2:4) type B-0 (12.5mm graded aggregate) in sub base finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar (1:3) with water proofing compound finished even and smooth (without using extra lime or cement in sunken floor) complete all as specified and directed. Note: Water Proofing Compound measured and paid separately.

M&L for glass dividing strips, 3 mm thick and inserted in position, conform to design complete all as specified and directed.

M&L for applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu. m. per sq. m complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for reinforced cement concrete (Nominal Mix) type B1 (1:2:4) (20 mm graded aggregare) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L for use and waste form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (horizonal or sloping) for flat rough finished surfaces of concrete complete all as specified and as directed.

M&L for mild steel TMT bars 10 mm dia and over ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

M&L for mild steel TMT bars 6 to 8mm dia and over ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of Each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer of cement mortar in (1:6) for laying floor finishes complete all as specified and as directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of Each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer of cement mortar in (1:6) for laying floor finishes complete all as specified and as directed.

M&L for glazed ceramic, coloured tiles of size 300mm x 200mm x 6-7mm thick, on vertical surfaces such as skirting, dados etc, including 10 mm thick bedding in cement mortar (1:4) and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M&L for glazed ceramic, coloured tiles of size 450X 350X 7 mm thick , on vertical surfaces such as skirting, dados etc, including 10 mm thick bedding in cement mortar (1:4) and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M&L for granite (of any type) tiles 18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar (1:6) on other than fair faces of brick masonry or concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15 mm thick of internal wall on fair faces of brick work or concrete surfaces in cement mortar in (1:4) and finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick on ceiling in cement mortar (1:3) finished even & smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new plastered surface of walls etc and applying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specified and as directed.

M&L for preparation of new plastered surface of walls etc and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of new plastered surface of ceiling etc and applying three coats of white wash complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

S&F for 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in Each pane complete all as specified and as directed.

S&F for 3 mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.5 Sqm in Each pane complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 25 to 32 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

S&F for 15 mm bore, steel tubes, galvanised, medium grade with all fittings & fixed complete to wall and ceiling or laid in floors etc complete all as specified and as directed.

S&F for 20 mm bore, steel tubes, galvanised, medium grade with all fittings & fixed complete to wall and ceiling or laid in floors etc complete all as specified and as directed.

S&F for 25 mm bore, steel tubes, galvanised, medium grade with all fittings & fixed complete to wall and ceiling or laid in floors etc complete all as specified and as directed.

M&L for cutting chases, pinning in brickwalls, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 10 cm and not exceeding 20 cm girth complete all as specified and as directed.

Supply and laying, CPVC pipe of 16mm outer dia, SDR 11 pain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

Supply and laying, CPVC pipe of 20mm outer dia, SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

Supply and laying, CPVC pipe of 25mm outer dia, SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

S&F for 16mm outer dia, CPVC brass thread elbow complete all as specified and as directed.

S&F for 16mm outer dia, CPVC brass thread Tee complete all as specified and as directed.

S&F for 20mm outer dia, CPVC brass thread union complete all as specified and as directed.

S&F for 25mm outer dia, CPVC brass thread union complete all as specified and as directed.

S&F for 25mm outer dia, CPVC ball valve complete all as specified and as directed.

S&F for 25mm outer dia, CPVC tank adopter complete all as specified and as directed.

Dismantling of water tank capacity excedding 250 Ltrs and not exceeding 500 Ltrs and removing to store complete all as specified and as directed.

Dismantling of water tank capacity exceeding 500 Ltrs and not exceeding 1000 Ltrs and removing to store complete all as specified and as directed.

Dismantling of water tank capacity exceeding 1000 Ltrs and not exceeding 2000 Ltrs and removing to store complete all as specified and as directed.

S&F for 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical or vertical with closed top) as per IS 12701:1996, hoisted and fixed in position including provision of 20/15mm bore medium grade pipe for connecting inlet, outlet, overflow and washout pipe complete all as specified and as directed.

S&F for 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical or vertical with closed top) as per IS 12701:1996, hoisted and fixed in position including provision of 20/15mm bore medium grade pipe for connecting inlet, outlet, overflow and washout pipe complete all as specified and as directed.

S&F for 2000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical or vertical with closed top) as per IS 12701:1996, hoisted and fixed in position including provision of 20/15mm bore medium grade pipe for connecting inlet, outlet, overflow and washout pipe complete all as specified and as directed.

S&F for 20 mm bore, ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

S&F in repairs 15mm bore dia, bib taps, CP with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferule and fixed complete all as specified and as directed.

S&F in repairs 15 mm bore dia stop valves, cast copper alloy, fancy type, chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repairs 15mm bore dia stop valves (concealed type), cast copper alloy, fancy type, chromium plated, long sunk and cup, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repairs 15mm bore dia, pillar taps, chromium plated, cast copper alloy, fancy type with capstan heads, screwed down high pressure, with or without lettered 'Hot' or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed.

S&F for brass chromium plated shower rose, 125 mm size, with or without swivel joint any size incl fixing to steel pipe or union complete all as specified and as directed

S&F in repairs 32mm bore, high density poly-ethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed to wall, ceiling or in floors complete all as specified and as directed.

S&F in repairs soap dish, vitreous china white, approximate size 160x 160 x 90mm fixed to plugs with chromium plated brass screws complete all as specified and as directed.

S&F in repair brass chromium plated tubular towel rail, D type, 60cm long, 20mm dia with brackets complete all as specified and as directed.

S&F in repairs white vitreous china squatting pan 'Orissa pattern' of size 580mmx440 mm white, with integral foot rests connected with 'P' or 'S' trap and flushing pipe and taking out old WC & connections complete all as specified and as directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed.

S&F in repairs for vitreous china bowl urinal, flat back size of 465x355x265mm whitw with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) but fixing plug bedding urinal against wall in cement mortar (1:2) securing urinal to plug including 60mm long brass screws pointing around urinal back in cement mortar including 15mm brass stop cock and waste coupling brass CP complete all as specified and as directed.

S&F in repairs vitreous china wash basin, size 550x400mm, white, flat back, with PVC waste pipe, CP waste coupling, chain, plug and porcelain stopper & brackets including cutting for and pinning in ends of brackets but excluding tap complete all as specified and as directed. Make : Cat No. C0406 of Parryware/Hindware/Cera.

S&F for plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in repairs for PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and as directed.

S&F in repairs PVC low level flushing cistern, 10 litre capacity, valveless, symphonic action type with inlet, ball valve, float and handle incl bracket, PVC conection pipe and flush pipe of polyethylene of low or high density or PVC 32 mm dia, complete all as specified and as directed.

S&F in repair CP health faucet cast copper alloy with push button & 1m long flexible steel pipe with PVC lining suitable for 15mm bore pipe complete all as specified and directed.

M&L for PVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement including disconnection of old existing trap, and connected with existing water pipe complete all as specified and directed.

M&L for 32mm bore, brass chromium plated, bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed.

M&L for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm longcomplete all as specified and directed.

S&F for grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.

S&F in repairs toilet paper holder, vitreous china, box type complete all as specified and as directed.

S&F in repairs sink with drainage board, made out of stainless steel 1.00mm thick, kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495x420mm and bowl size 410X330X160mm complete all as specified and as directed. Make : Prayag/Anjali/Blue Star.

S&F in repairs 40mm dia waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms/ 40mm-60 gms) complete all as specified and as directed.

S&F in repairs 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F in repairs 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S&F for 110 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and as directed.

S&F for 75 mm bore PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified and as directed.

S&F for 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed.

S&F for 110 mm bore PVC (SWR) bends with acces any radius complete all as specified and as directed.

S&F for 75 mm bore PVC (SWR) bends any radius complete all as specified and as directed.

S&F for 75 mm bore PVC (SWR) bends with acces any radius complete all as specified and as directed.

S&F for 110mm PVC (SWR), WC connector with lip ring complete all as specified and as directed.

S&F in repair 125/110 mm dia outlet and minimum 50mm water seal, PVC (SWR) gully trap, with grating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

M&L for plain cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggragate) as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 110 mm bore pipes complete all as specified and as directed .

S&F in repairs 15mm dia two way bib cock complete all as specified and as directed. Make : Cat No. G3034A1 of Parryware/Hindware/Cera.

S&F in repairs 15mm dia angle stop cock with flange complete all as specified and as directed. Make : Cat No. G1807A1 of Parryware/Hindware/Cera.

S&F in repairs wall mixer 3-in-1 complete all as specified and as directed. Make : Cat No. G0617A1 of Parryware/Hindware/Cera.

S&F in repairs sink mixer wall mounted with long arm complete all as specified and as directed. Make : Cat No T3635A1 of Parryware/Hindware/Cera.

S&F in repairs brass hand shower with hose and clutch complete all as specified and as directed. Make : Cat No T9946A1 of Parryware/Hindware/Cera.

S&F in repairs basin mixer without pop up all complete as specified and as directed. Make : Cat No. G0114A1 of Parryware/Hindware/Cera.

S&F in repairs Towel ring, cast copper alloy, fancy type, chromium plated, complete all as specified and as directed. Make : Cat No. G6402A1 of Parryware/Hindware/Cera.

S&F corner self complete all as specified and as directed. Make: Parryware Cat No T6010A1 or equivalent of Make Hindware/ CERA/ SOMANY/PRAYAG

S&F in repairs, S decor stainless steel curtain finial with brackets (copper) with matching stainless steel rod etc complete all as specified and as directed.

S&F chromium plated SS rain shower arm square size 24 ench complete all as specified and as directed. Make : Parryware Cat No T9949A1 or equivalent of Make Hindware /CERA / SOMANY/ PRAYAG

S&F stainless steel rain shower (without arm) square type size 300X300mm all as specified and as directed. Make : Parryware Cat No T9992A1 or equivalent of Make Hindware /CERA / SOMANY /PRAYAG

S&F in repairs New Magnum (combo set) white coloured urinal port size 380x400x590 complete all as specified and as directed. Make : Cat Part No C0583 of Parryware/Hindware/Cera.

S&F in repairs single piece white coloured EWC of size 620x350x725 complete all as specified and as directed. Make : Cat Part No C08852 of Parryware/Hindware/Cera.

S&F in repairs cromium plated standard Towel rack complete all as specified and as directed. Make : Cat Part No T6008A1 of Parryware/Hindware/Cera.

M H KHAN

AFTAB ENTERPRISES

STANDARD ELECTRIC WINDERS

boruah construction

NChetia and Sons Trading

R.D.CONSTRUCTION

FREEZCON