Providing lighting system around SWM Vehicles Parking Facility and Electrification works at Hosayallapur of ward no. 22

Providing lighting system around SWM Vehicles Parking Facility and Electrification works at Hosayallapur of ward no. 22

LED Fixing Charges Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including Clamp, bolts, nuts and wiring using suitable capacity wires. PWD Ele SR 2023-2...

Open Conduit System Supplying heavy gauge PVC conduit pipe . dia . mm thick confirming to IS 2509 with suitable size bends, junction boxes,adhesive paste etc , and fixing using inverted wood plugs in ...

Copper wire Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with ...

16 meter Octagonal Pole

Fabrication, Supplying, Erection, Testing and Commissioning of . ms long Polygon high mast with Single/Multiple telescopic sections having, (minimum overlap distance of 1.5 tim...

Earth Work Earth work excavation by manual means for drains, canals, waste weir, draft,approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils,...

Base Concerete Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per re...

TMT Steel Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joi...

Centering Work Centering, shuttering, formwork for foundation,sub structure of cross drainages. 5% of the finished concrete item rate ( Addendum-I of vol 01, Sl no 03 of pg no 111) Basic Rs- 6243 X 5%...

Concerete Providing and laying in position Reinforced cement concrete for all foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes ma...

Hylum plastic sheet Supplying and fixing hylum plastic sheet 3mm thick with

necessary nitches for fixing switches, regulators etc., and

fixing on existing wood or metal box using N.F. screws. Basic Ra...

Fuses Supplying & fixing of Porcelain fuse channel with cut out

on existing wooden/panel using necessary nuts, bolts and

washers. 5.7.2) 32Amps Basic Rate - 241=00 ASL 5% - 12=05 Total - 253=05 PWD El...

Contactor Switch Supply and fixing of 4pole power contactor with NO/NC

contacts on existing wood/panel board using necessary

bolts, nuts, washers and wiring etc., complete with AC-3

Rating and as per ...

MCB Switch Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit br...

Timer Switch Supplying and fixing Microprocessor based Electronic timer

(without contactor, Din Mounting using necessary bolts,

nuts and washers etc.,.) 3-120sec setting. Basic Rate - 2315=00 ASL 5% -...

MS Box Fabricating supplying and mounting MS box made out .SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equi...

Angle Iron Supplying and fixing angle iron frame work fabricated out of M.S.angle iron. and M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved pai...

Earthing GI Grounding pipe, 51.01)B - Class, 42 mm dia, 2.5 M long, 3.2 mm thick with bolts nuts, GI Strips and washers complete

minimum weight of GI Pipe: 7.3kg Hescom SR 2023-24 Item code 25.a 51.01...

Earthing GI Grounding pipe, 51.01)B - Class, 42 mm dia, 2.5 M long, 3.2 mm thick with bolts nuts, GI Strips and washers complete

minimum weight of GI Pipe: 7.3kg Hescom SR 2023-24 Item code 25.a 51.01...

UG Cable 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975...

UG Cable Labour Charges Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff

21.05) 2.5 to 25 Sqmm Basic Rate - 20886...

Wiring for lighting/power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealedsystem of wiring with specified IS-69...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

Supply of LED Flood Light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. 5.38 PWD,Elct, SR-2023-24 Page No.19 Item code 5.38

Good Quality well burnt charcoal for grounding purposes packed in non returnable gunny bag of 30 kg each .

Good Quality salt for grounding purposes packed in 50kg gunny bag .

Double Pole Structure complete including 5 Kg, 8SWG, GI Wire for Structure Grounding using 9m RCC supports (Material Charges)

H frame for mounting GOS

(Material Charges)

11kV, 45kN Composite/Polymeric Insulator

11kV, 5KN Composite/Polymeric Pin Insulator(20mm dia FP Rod)

Guy Wire 7/10 SWG GuyWire

(7/3.251 mm Dia), Std Wt: 680 Kg/KM

11 kV, 200 Amps Single Break GOS

11 kV, HG Fuse Unit with Solid Core Insulator

(Dwg No. BESCOM/GM/QS&S/21 Dtd 24.11.2018)

Anti Climbing Device GI Barbed wire (12 Mtr/Kg)

11 kV Lightning Arrester, Metal Oxide

10 kV, 5 kA Polymeric Type with ground disconnector DISCONNECTOR(Dwg No. BESCOM/GM/QS&S/26 Dtd 24.10.2007)

Caution/Danger Board.

11 kV X cross arm with H.T.Single top support,

clamp,bolts, nuts and washers for RCC poles

ACSR Conductor as per IS-398 (Part - 2/1996), Rabbit ACSR(6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM

Double Pole Structure complete including 5 Kg, 8SWG,

GI Wire for Structure Grounding using 9m RCC supports

(Labour Charges)

H frame for mounting GOS

(Labour Charges)

11kV Solid Core Type HG Fuse Unit

(Labour Charges)

11 kV Lightning Arrester, Metal Oxide

10 kV, 5 kA Polymeric Type with ground disconnector

Caution/Danger Board as per Drawing No. BESCOM/GM/CP/40/ Dt: 24.10.07

(Labour Charges)

Rabbit ACSR Conductor with 1.5% Sag

(Labour Charges)

HT UG Cable 36) 11 kV, 3 Core, XPLE HTUG Cable with

pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975

Termination Kit 45) 11 kV, Jointing & Cable Termination Kit as per IS-13573 Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable

45.07)3x95 Sqmm

RCC Hume Pipe, 2000 mm Long, 150 mm Dia

Collars for RCC Hume Pipe

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...

Laying and Jointing the pipes (100-150 mm Dia) including lowering in Position: Fixing Collars etc., Joining with mud mortor complete

Fabricating, supplying and erection of …Mtrs long hot dip Galvanized Octagonal pole with BSEN10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, includ...

G.I Bracket Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable

for out door luminaries and mounted on Octagonal pole using

necessary bolts, nuts etc., complete. 4.6.4) Double Arm Bracket...

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to table 3 class 5 of IS:8130-1984 and (Virgin) PVC insulation and she...

Supplying . amps rated 3phase with neutral bus bar using required capacity electrolytic alluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which ...

Metering cubicle LT Metering Cubicle at Low Tension for 50 KW to 150 KW having specification & design as per the prototype approval (Excluding Meter Cost & Modem Cost) Hescom SR 2023-24 Item cod.53.02...

Metering cubicle 9)Erection of HT Metering Cubicle, LT Metering Cubicle, LT Feeder Piller Box, LT Distribution Box HT Metering Cubicle, LT Metering Cubicle

9.01)Erection of HT metering Cubicle on Plat...

Generator Supplying, installing, testing and commissioning of Diesel Generator set with following specifications. Power rating as per standard reference condition as per-BS 5514/ISO 3046/ ISO 8528 & I...

AMF Panel Supply, Erection, testing and commissioning of AMF panel suitable for .kVA DG set. The panel is of cubical type base/floor mounting control panel with hinged doors, undrilled bottom gland pl...

DG Set Grounding Supplying fixing and wiring earth electrode for grounding of lifts,transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size...

G I Strips GI/Copper strips for grounding connections, using necessary fixing

materials as required. 12.58.2 ) 25 x 3 mm GI strip Item code 12.58.2

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuser with Injection...

1.1Kv XLPE or Heat resistant PVC insulated,PVC Extruded Inner sheath Armoured LT UG cable as per IS-1554(part-1 )or IS-7098 Part 1,Armouring strip thickness and resistivity as per IS-3975 25...

Digging Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 m3 in volume and stock piling at designated locations and disposal of d...

roviding, laying and jointing HDPE pipes of specified grade andconforming to IS 4984-2016 with latest ammendments and conveyingto work site including loading and unloading at both destinations androll...

Digging of Pit for providing GI Pipe type Earthing 1.6.1) Ordinary Soil

Pole concreting (without coping) B)Concreting with Material & Labour (The rate of Rs. 6243/m3 for Cement Concrete Mix 1:2:4 [M-15] Using 20mm Nominal size

graded crushed coarse aggregates is extracted...

Coping for Poles C)Concreting with Material & Labour (The rate of Rs. 6243/m3 for Cement Concrete Mix 1:2:4 [M-15] Using 20mm Nominal size

graded crushed coarse aggregates is extracted from Item No. 2...

UG Cable 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975...

Termination Kit 22) Cable Joint and wiring (for HT & LT UG Cable) HT UG Cable Making and Fixing pot head for HT Cable only Heat shrinkable Type Terminations

22.04) 3x95 to 3x150 Sqmm

UG Cable Labour Charges Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff

21.06) 35 to 95 Sqmm

Pre-Insulated lugs - CPTAU for 95 Sqmm ( Material Charges)

Intallation of Pre-Insulated lugs - CPTAU for 95 Sqmm ( Material Charges)

Pre - Insulated Lug - CPTAU for 25 Sqmm

Intallation of Pre-Insulated lugs - CPTAU for 25 Sqmm

Pre - Insulated Lug - CPTAU for 16 Sqmm

Intallation of Pre-Insulated lugs - CPTAU for 16 Sqmm

Base concreting A)Concreting with Material & Labour (The rate of Rs. 6243/m3 for Cement Concrete Mix 1:2:4 [M-15] Using 20mm Nominal size

graded crushed coarse aggregates is extracted from Item No. 2....

Guy Set Complete with No. 15 strain insulators & Concreting materials

(Material Charges)

Guy Set Complete with No. 15 strain insulators & Concreting materials

(Labour Charges)

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca...

Supply and Installation / Fixing / Provision of Outdoor type

Thermoplastic Modular Panel enclosure with transparent

Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof,

dust proof, water ...

Distribution Transformer - 3 Phase, 11kV/433V - Stacked CRGO Core with Oil as per IS-1180 (Part-1): 2014

63 kVA, Aluminum Wdg, Star 2 (5 Star)

Erection of 25 to 63 kVA Transformer on Transformer

Pre - Stressed Tubular Spun Pole 11 M Long - 500 Kg WL

Pre - Stressed Tubular Spun Pole 11 M Long - 500 Kg WL

Item Code 3.a Labour Charges

Base concreting 1:2:4, 1000x1000x150 mm

Pole concreting 1:2:4, 1000x1000x2500 mm

Coping 1:2:4 (as per actuals) 26.c.b

Three H Frame with Transformer Seating and Seating angle support X arm for 11 mtr Spun Pole for 250/100 kVA (UG Cable) - MS

Three H Frame with Transformer Seating and Seating angle support X arm for 11 mtr Spun Pole for 250/100 kVA (UG Cable) - MS

Item Code 8.c Labour Charges

HT Single Top Support with bolts, nuts &

HT Single Top Support with bolts, nuts &

Item Code 9.a Labour Charges

Alkathene Tube 19mm Dia and in coils of 30 Mtrs

LT Protection Kit for 100 kVA

LT Protection Kit for 100 kVA

17.01 Labour Charges

LT Distribution box for 100 kVA with MCB

LT Distribution box for 100 kVA with MCB

18.01 Labour Charges

11 kV X cross arm with H.T.Single top support,

clamp,bolts, nuts and washers for RCC poles

(LabourCharges)

200A, Single break 11KV GOS

(Labour Charges)

GI Pipe, 100 mm Dia for Cable raising etc., (Extracted from Vol-5, BWSSB SR Item No. 177)

GI Pipe, 100 mm Dia for Cable raising etc., (Extracted from Vol-5, BWSSB SR Item No. 177) Labour Charges

Meter Protection/Tamper Proof box with busbar for LT 3 Ph with CT Ratio 100/5A, 1.0 Accuracy Class

Fixing of LT Metering Box with clamping arrangement for

mounting on the Transformer structure with necessary terminal strip and CT mounting arrangement for housing the ETV Meters and connecting to the...

Wiring of 1 Circuit of LT Wiring for for 25/63/100 kVA DTC to the existing LT protection Kit/Distribution Box via metering box. (includes fixing of necessary supports like 2 Pin cross arm, Spacer etc)

Anti Climbing Device (12mtrs/1Kg GI Barbed Wire) Lumpsum

(Labour Charges)

Al Lead Wire - 95 Sqmm

CDS-45 63Kva sl no. 1

Heavy Duty Long Barrel Copper Lug - 95 Sqmm

CDS-45 63Kva sl no. 2

PG Clamps - Rabbit to 95 Sqmm

CDS-45 63Kva sl no. 3

Spacers for DTC Wiring

CDS-45 63Kva sl no. 4

Fish Plate with necessary Clamps, bolts & nuts etc

complete (Galvanised)

CDS-45 63Kva sl no. 5

HT UG Cable Labour Charges 21) Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff HT Cable