Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.4 LAccepted-AOC 10 SANJAY HSG SOCIETY RACCA COLONY SHARANPUR ROAD NASHIK 422 002 | NASHIK | MAHARASHTRA | 422002 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹22.3 L+₹2.5 L (12.8%)Rejected-Finance ALPHA HOUSE PLOT NO 29 AGP P10 ASHWIN SECTOR NEW CIDCO NASIK 422 009 | NASHIK | MAHARASHTRA | 422009 | L2 | Rejected-Finance Not lowest |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
29 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Nasik Road
Garrison Engineer Nasik Road AOP Complex Near AOP Gate PO Gandhinagar Nasik 422006
As per Tender Documents
2022_MES_535130_1
GE/NRC/8902/E8
Open Tender
Civil Works
Item Rate
270 days
Garrison Engineer Nasik Road
As per NIT
7 documents required · 7 mandatory
₹500
Garrison Engineer Nasik Road
₹50,000
Yes
18 Aug 2022
1 Jul 2022
1 Aug 2022
1 Jul 2022
29 Jul 2022
15 Jul 2022
Amount
M&L for preparation of old plastered surfaces and applying two coats of distemper oil emulsion on surafaces of walls over Chalk whiting, on plastered surfaces, prepara-tory to distempering and primer including complete removal of existing treatment,removing nails, making good holes, cracks etc by filling with putty all as specified and directed by Engr-in-Charge.
M&L for preparation of old plastered surfaces and applying a coat of distemper oil emulsion on surfaces of walls, removing nails, making good holes, cracks etc by filling with putty all as specified and directed by Engineer-in-Charge.
M&L for complete removal of existing treatment of old plastered wall surfaces and applying two coat of weather resistant acrylic (Apex of Asian or equivalent) paint over one coat of primer on surfaces of walls including necessary scaffolding etc all as specified and directed by Engr-in-Charge ht upto 15 mtr.
M&L for One coat of exetior emulsion paint (apex/weathercoat ) on walls and ceiling plastered or unplastered surfaces including preparing by brooming down or steel wire brushing scrapping down smoke soot, moulds, moss and efflorescent salts nd trading oil and greasy spots, removing nails, making good holes, cracks etc, by filling with putty.
M&L for .One coat of cement based paint on walls including preperation of old treated plastered or unplastered surfaces by brooming down or steel wire brushing scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, removing nails, making good holes, cracks etc by filling with putty.
M&L for Two coat of cement based paint on walls including preperation of old treated plastered or unplastered surfaces by brooming down or steel wire brushing scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, removing nails, making good holes, cracks etc by filling with putty.
M&L for preparation of old stone walls/concrete surfaces with one coat of synthetic enamel paint black and white colour combiination as per the existing pattern including necessary scaffolding etc all as specified and directed by Engineer-in-Charge.
M&L for One coat of white wash on walls including preparation of plastered or unplastered surfaces by brooming down or steel wire brushing scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots: removing nails, making good holes, cracks etc by filling with putty.
M&L for One coat of white wash on ceiling including preparation of plastered unplastered surfaces by brooming down or steel wire brushing: scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots: removing nails, making good holes cracks etc. by filling with putty.
M&L for Preparation of new or previously untreated steel or iron surfaces of any description over 10cm width or girth and two coats of aluminium paint over a coat over aluminium redoxide primer.
M&L for One coat of synthetic enamel paint on old painted steel or iron surfaces of any description over 10cm width or girth including preparation of surface.
M&L for One coat of synthetic enamel paint on old painted wood or wood based surfaces of any description over 10cm width or girth including preparation of surface.
Preparation of new surfaces of steel and applying two coats of synthetic enamel paint of any description over 10cm width or girht.
M&L for Preparation of old surfaces of steel and applying one coat of synthetic enamel paint of any description not exc 10cm width or girth when unconnected with other painting or when painted in different tint.
Dismantling plain or corrugated steel sheeting any gauge, thickness, including Nainita or similar pattern roof coverings complete all as specified and as directed. Note :- Work to be executed for hanger bldgs having height 10m and above. Rate quoted by the contractor deemed to be inclusive of the said aspect.
Dismantling Asbestos cement (corrugated,semi corrugated etc) sheets in roof coverings complete all as specified and as directed. Note :- Work to be executed for hanger bldgs having height 10m and above. Rate quoted by the contractor deemed to be inclusive of the said aspect.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw complete all as specified and as directed. Note :- Work to be executed for hanger bldgs having height 10m and above. Rate quoted by the contractor deemed to be inclusive of the said aspect.
All as per item No 17.00 above, but for plain steel sheet 0.50mm thick complete all as specified and as directed.
S&F 2mm thick Fibre glass reinforced translucent reinforced corrugated sheeting with two corrugations side lap fixed with coach screw and washers in roof wall etc complete all as specified and as directed. Note :- Work to be executed for hanger bldgs having height 10m and above. Rate quoted by the contractor deemed to be inclusive of the said aspect.
S&F for 2mm thick plain Polycarbonate Sheet with including all necessary fixtures and fastenings. Note :- Work to be executed for hanger bldgs having height 10m and above. Rate quoted by the contractor deemed to be inclusive of the said aspect.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified.
S&F rolled sections as in main and cross beams hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connected plates conforming to Fe410-W(Gde-E-250) quality -A complete all as specified and as directed.
S&F framed work as in doors or gates of angle or other section with gusset plates, rails braces, etc conforming Fe 410-W(Gde-E-250) quality-Ato complete drilled for fixing of steel sheeting or other covering Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel, sheeting or other covering, running rails and guides) and hanging: also fastening and fixing complete and all as specified and as directed.
S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1998 Grade St-240 complete and all as specified and as directed.
S&F steel work in tubular sections in runers/rafters/purlins and posts including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1998 Grade St-240 complete and all as specified and as directed.
Repairing of manually operated handle mechanism hangar doors opening and closing shutters (4mx10m) erected any position, necessary servicing/repairs oiling/Greasing including any misc repairs/welding/securing hinges/screws etc and also including applying one coat of synthetice enamel paint on both sides and angles to match the existing surface door height up to 10m complete all as directed by Engr-in-Charge.
Repairing of manually operated garage rolling shutters erected any position, necessary servicing/repairs oiling/Greasing including any misc repairs/welding/securing hinges/screws etc and also including applying one coat of synthetice enamel paint on both sides and angles to match the existing surface shutter height up to 5m complete all as directed by Engr-in-Charge.
S&F in repairs 1.25mm thick Steel rolling shutters, with ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete; push pull or manual type
Taking down AC rain water pipes (any size or pattern) incl all fittings, heads shoes, bends, swan neck etc. Note :- Work to be executed for hanger bldgs having height 10m and above. Rate quoted by the contractor deemed to be inclusive of the said aspect.
S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including cutting around for inserting into wall, roof slab etc. and sealing /making good to match the existing surface. Note :- Work to be executed for hanger bldgs having height 10m and above. Rate quoted by the contractor deemed to be inclusive of the said aspect.
S&F110mm bore PVC (SWR) bends any radius withn rubber ring joints or jointed with solvent cement fixed to walls including cutting around for inserting into wall, roof slab etc. and sealing/making good to match the existing suraces.
M&L for bands and straps, supports or stays for rainwater, ventillating pipes incl bolts, if required hooks (stays) for clamps, holdfast, wall ties and similar small articles conforming to Fe-290 Gde E-165.
S&F 1mm thick plain galvanised, mild steel sheeting, in ridges, hips, Valley gutters drip and straight flashings (length and girth as fixed) with grade of zinc coating 275.
Taking down carefully existing bitumenous membrane/tarfelt treatment any description and cleaning and making good damaged surface in cement mortar 1:4 where ever required to make surface ready to receive fresh water proofing tretment on roof and flashing and junctions of parapet kerb, wall etc. and removing rubbish out of defence land.
Demolition of concrete (unreinforced) of any description and in any position not otherwise secifically provided for.
M&L for Providing cement concrete type B0 1:2:4(12.5mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges.
M&L for Waterproofing on roof including flashing and junctions of parapet,kerb, wall etc.as under :- (a) Applying bituminous primer on cleaned and dried surface @0.20 Kg/Sqm. (b) A coat of hot blown type bitumen of grade 85/25, applied hot at the rate of 1.2 Kg/sqm. (c) Laying on primed surface by thermo fusion (torch application ) 3m thick APP based polymeric water proofing membrane wighing not less than 3.50kg/sqm and reinforced with polyester non woven fabric (not less than 150 gms/sqm). (d) Painting the exposed APP membrane surface with bituminous aluminium paint @ 0.15Kg/Sqm.
M&L for rendering 15mm thick in CM 1:4 on roof surfaces finished even and smooth with extra cement including waterproofing compound complete all as specified and directed.
Supplying only integral water proofing compound ISI marked complete all as specified and as directed.
Dismantling water tanks exc 250 & n exc 500 ltr capacity.
Disconnecting existing tanks exc 250 n exc 500 setting aside (or lowering if required), cleaning and removing all scale and dirt, etc. from mouth of circulating pipes etc and hoisting if required reconnecting and re-fixing in position.
Supply Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 litre capacity, and fixed in position all as specified.
S&F ball valves, 20mm bore high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) fixed in repairs.
Fixing only in repair ball valves any bore or size.
Raking out/pointing in cement or cement lime mortar to stone mosonry work.
Raising pointing to random or polygonal rubble, uncoursed or brought upto courses in cement mortar 1:4.
Dismantling wall ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blalnkets, including cover fillets, GI/aluminium gridetc.
M&L for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length ) of 0.55 mm thickness having kurled web of 50mm and fllange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre.
M&L for 6mm and thick PVC multiwall 250mm wide (tongue and groove interlocking type) panels, textured on one side (as approved): fixed to framework in ceiling with countersunk screws and inerlocked, including all necessary special fitting accessories such as junction, corner and turning matching to board. (GI framework to be measured and paid separately)
M&L for 8mm thick and PVC multiwall 250mm wide (tongue and groove interlocking type) panels wall lining and fixing at site on PVC frame as per specifications.
Demolition of cement concrete (un-reinforced) in ground floor and paving thickness not exc 15cm complete.
M&L for cement concrete type D2 1:4:8 (40mm graded aggregate) in filling and mass concrete sub base in ground flooring/plinth.
M&L for screed bed or bedding layer20mm thick in cm 1:6 for laying floor finishes complete all as specified and directed by Engr-in-Charge.
M&L for rough shahabad stone 25mm to 30mm thick in flooring /plinth set and jointed in neat cement slurry and pointed in cm 1:4 complete all as specified and directed.
Demolition of stone slabs and tiles of any descrption or thickness in floor aprons etc laid bedded & pointed in any mortar all as specified and directed.
M&L for 18 to 20mm thick Granite (Telephonic black/Ruby red) work (table rubbed and polished) in steps, jambs pillars, window cills cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture re of pigment to match with shade of granite 18 to 20mm thick all as specified and directed.
Taking down chowkats or frames not exc 1.5 sqm each (without taking of shutters from the frames).
Taking down chowkats or frames with shutter exc 1.50 Sqm but not exc 4.00 Sqm each (without taking off shutter from frame)
S&F Aluminium (minimum 50 micron powder coated) frame for doors, window, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.
S&F Aluminium (minimum 50 micron powder coated) door shutters, aluminium section weighing 0.55 kg / m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges,anodised aluminium snap beading screw etc. complete all as specified.
S&F Aluminium (minimum 50 micron powder coated) window and ventilator shutters, side hung / sliding type without sash bars, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminum fitting such as peg stays / tower bolt 150 mm long (1 No) hinges type B- 21, 100mm long (2 Nos), suitable handle (1No), rollers . grip etc. complete all as spicifed.
S&F 5.5mm thick sheet glass plain or tinted ordiner quality, fixed in aluminium doors and windws.
M&L for Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple or fixed in alumium frames.
S&F Door closer hydraulically regulated,cast iron body designation No-3 universal type, suitable for door shutter of 851 to 1000 mm in width & of weight between 61 to 80 Kg
Taking down cement or cement lime plaster any description on brick or stone walls etc including racking out joints hacking for key scrubbing for key, scrubbing down with water etc complete all as specified and as directed.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement on walls compete all as specifed and as directed.
NOTE :- AMOUNT OF SCHEDULE OF CREDIT Rs. 34,762.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.
Alpha Construction
Bidder Name
M/S SAMEER SUBHASH PATANI
Alpha Construction
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .