WIDENING OF ROAD FROM P-85 TO KV SCHOOL AT INS MANDOVI UNDER GE (P) NAVY MANDOVI

Excavating over area n. exc. 1.5 m deep and getting out in soft/ loose soil complete all as specified and directed.

Removing excavated material to a distance exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and directed.

Rolling and consolidating formation surfaces in cutting using power roller exc 8 tonne & n. exc. 12 tonne capacity to required camber and gradient complete all as specified and directed.

M & L for providing soling (or sub base) with broken boulders or quarried stone, 150 mm thick, inter stices filled, surface formed and rolled and consolidated to required gradient and camber complete all as specified and directed.

M & L for providing 15cm thick (compacted thickness) WBM, with granite, trap pr basalt coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required complete all as specified and directed.

M & L for applying evenly a priming/tack coat with bituminous primer at 10 kg/10 Sqm with paving bitumen complete all as specified and directed.

M & L for providing premix bituminous, macadam laid/ rolled with paving bitumen, any penetration, and compacted to required gradient and camber (consolidated thickness 75mm or less) complete all as specified and directed.

M & L for applying evenly a priming/tack coat with bituminous primer at 5 kg/10 Sqm with paving bitumen complete all as specified and directed.

M & L for providing bituminous premix semi-dense asphaltic concrete carpet of 40mm consolidated thickness using viscosity grade VG-30 bitumen with 0.34 cum stone chipping mixed with 5.5% binder content by weight of total mix using hot mix plant and laid with mechanical paver finish, rolled and compacted with paver roller exc 6 tonne and nexc 12 tonne capacity to required camber and gradient complete all as specified and directed. Notes:- (I) Contractor shall submit the authenticated weigh batch receipt as per load material in site duly marked vehicle number. (II) The binder content specified is minimum. In case of quantity of binder as per job mix formula works out to be more the 5.5 % of weight of total mix, extra quantity shall be provided by contractor without any extra cost to the Govt.

M & L for providing and laying at or near ground level, factory made kerb stone of M-25 grade cement concrete, in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M & L for perparing bituminous surfaces of road and marking 2.5 mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc. 10 cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

Excavating in trenches, not exceeding 1.5 m wide and n exc 1.5 m in depth and getting out in soft/ loose soil for laying and taking down UG cable complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick using excavated soft disintegrated rock complete all as specified and directed.

Removing excavated material to a distance n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Supply and laying double walled corrugated (DWC) HDPE duct pipe of 40mm diameter conforming to IS, approved colour, complete with fittings for cable protection complete all as specified and directed.

M & L for providing LT UG XLPE insulated, armoured, heavy duty electric cables with multistranded aluminium conductor of 16 Sqmm 4 core size, 1100 volts grade, confirming to IS 7098 Part-1 1988, including centre glands, lugs, jointing materials etc, laid in trenches or fixed to wall includung connecting, testing and commissioning complete all as specified and directed. Note: Excavation, earthwork, cable protection etc shall be measured and paid separately under relevant items of this schedule

Supply and lay GI tubing of 50mm dia bore sizes, light grade, ISI marked, galvanised, laid in trenches for cable protection including fittings such as bends, elbows, reducers etc complete all as specified and directed.

Supply and erection of 7.0 meter height hot dip galvanised octagonal pole with single arm bracket made of HT steel of grade S355 of BSEN 10025, IS 2062, with 130 mm size at base & 70 mm at top, made up of 3mm thick G.I. sheet, base plate of max size 220 x 220 x 12 mm thick, with suitable foundation as per manufacturer recommendation, having 30 cm height from ground level, with 4 Nos of M20 X 600mm long ‘J’ type EN 8 grade foundation bolts, template, integral power distribution, breaker and connector for loop in/out, suitable for 4C x 16 Sqmm/ 4 C x 25 Sqmm cable, connection cable of 1.5 Sq mm 3 core from terminal box to fitting with MCB SP 6 Amp, provision for fixing galvanised single/ double arm bracket for LED street light, complete as specified and directed. Make: Utkarsh/Crompton/Bajaj.

S & F hot dip galvanised bracket of length 1.50 meters, double arm for fixing LED street light on 8.0 meter high poles, complete as specified and directed. Make: Utkarsh/Crompton/Bajaj

S & F hot dip galvanised bracket of length 1.50 meters, single arm for fixing LED street light on 8.0 meter high poles, complete as specified and directed. Make: Utkarsh/Crompton/Bajaj

S & F LED street light fitting, 72/75 Watt, suitable for 230 V 50 Hz AC supply, outdoor type with high pressure die cast aluminum housing, heat resistant, complete with driver, lamp with corrosion resistance, thermal management in multiple optics, with IP 65/66 protection complete all as specified and directed. Make: Philips/ Crompton/ Bajaj/ Havell’s

M & L for dismantling concrete poles/ struts, any size complete all as specified and directed.

M & L for taking down existing street light fitting from existing pole and refixing the same in new poles, complete all as specified and directed.

Please Enable Macros to View BoQ information