REPAIR/REPLACEMENT OF FEEDER PILLAR BOX/BUSBAR/CHAMBER/LT PANEL/EARTHINGS SECURITY LIGHTS, STREET LIGHTS/AREA LIGHTS/GATE LIGHTS AND CONTROLLING PANELS INCLUDING CONNECTING WORKS OF GOLF AND SMQ AREAS AT HQTC BANGALORE

Amount

Excavation in trenches not. exc. 1.5m wide and not exc. 1.5 deep and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, watering and well ramming in layers not exc 25cm in soft/loose soil.

Removing surplus soil to a distance not exc 50m and depositing where directed at a level not exc. 1.5m above the starting point.

Material and labour for sand cushioning for under ground cable with locally available dry sand for protection of cable including spreading and consolidations, complete all as specified and directed.

Supplying and laying un-reinforced precast concrets cable cover class LV, Type 1, flat, size 250x150x40 mm.

Material & Labour for PCC 1:3:6 type C2 using 40mm graded aggregate as in copping/collar of poles and foundation of stay assembly etc complete all as specified and directed.

Taking out unserviceable cable any type/size from trenches,pole, road,duct etc including necessary joints,U/S fittings and pipes etc complete all as specified and directed.

Supply and laying in trenches /laid in floor/duct/drawn through conduit XLPE insulated,screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electric cable 1100V grade with aluminum conductor of cross sectional area 10 sqmm 2 core complete all as specified and directed .

All as per item No-8 but of size 16 sqmm 4 core.

All as per item No-8 but of size 25 sqmm 4 core.

All as per item No-8 but of size 35 sqmm 3.5core.

All as per item No-8 but of size 50 sqmm 3.5core.

All as per item No-8 but of size 70 sqmm 3.5core.

All as per item No-8 but of size 95 sqmm 3.5core.

All as per item No-8 but of size 120 sqmm 3.5core.

Dismantling of unserviceable/damaged MCCB of any type/size and removal from site.

S&F MCCB, 4 poles 415 Volts, 63 Amps, 16 kA, 50 Hz, AC, fixed thermal and fixed magnetic type in the existing LT panel board/sheet metal enclosure including connecting up incoming/out going cables connection with suitable lugs and testing complete all as specified & directed by Engineer-in-Charge.

S&F MCCB, 4 poles 415 Volts, 100 Amps, 16 kA, 50 Hz, AC,fixed thermal and fixed magnetic type in the existing LT panel board/sheet metal enclosure including connecting up incoming/out going cables connection with suitable lugs and testing complete all as specified & directed by Engineer-in-Charge.

S&F MCCB, 4 poles 415 Volts, 160 Amps, 36 kA, 50 Hz, AC, adjustable type in the existing LT panel board/sheet metal enclosure including connecting up incoming/out going cables connection with suitable lugs and testing complete all as specified & directed by Engineer-in-Charge.

S&F MCCB, 4 poles 415 Volts, 200 Amps, 36 kA, 50 Hz, AC, adjustable type in the existing LT panel board/sheet metal enclosure including connecting up incoming/out going cables connection with suitable lugs and testing complete all as specified & directed by Engineer-in-Charge.

S&F MCCB, 4 poles 415 Volts, 250 Amps, 36 kA, 50 Hz, AC, adjustable type in the existing LT panel board/sheet metal enclosure including connecting up incoming/out going cables connection with suitable lugs and testing complete all as specified & directed by Engineer-in-Charge.

S&F MCCB, 4 poles 415 Volts, 350 Amps, 36 kA, 50 Hz, AC, adjustable type in the existing LT panel board/sheet metal enclosure including connecting up incoming/out going cables connection with suitable lugs and testing complete all as specified & directed by Engineer-in-Charge.

S&F MCCB, 4 poles 415 Volts, 400 Amps, 36 kA, 50 Hz, AC, adjustable type in the existing LT panel board/sheet metal enclosure including connecting up incoming/out going cables connection with suitable lugs and testing complete all as specified & directed by Engineer-in-Charge.

S&F MCCB, 3 poles 415 Volts, 160 Amps, 36 kA, 50 Hz, AC, adjustable type in the existing LT panel board/sheet metal enclosure including connecting up incoming/out going cables connection with suitable lugs and testing complete all as specified & directed by Engineer-in-Charge.

S&F MCCB, 3 poles 415 Volts, 200 Amps, 36 kA, 50 Hz, AC, adjustable type in the existing LT panel board/sheet metal enclosure including connecting up incoming/out going cables connection with suitable lugs and testing complete all as specified & directed by Engineer-in-Charge.

S&F MCCB,3 poles 415 Volts, 250 Amps, 36 kA, 50 Hz, AC, adjustable type in the existing LT panel board/sheet metal enclosure including connecting up incoming/out going cables connection with suitable lugs and testing complete all as specified & directed by Engineer-in-Charge.

Supply & Fix MCB TPN 63A "C" curve, 415V,10KA 50 Hz, AC, adjustable type in the existing LT panel board/sheet metal enclosure including connecting up incoming/out going cables connection with suitable lugs and testing complete all as specified & directed by Engineer-in-Charge.

Dismantling and taking out old existing unserviceable/damaged/burnt change over switch 4 pole of capacity 100 Amp to 400 Amp 50 Hz 415 Volt any make,any capacity.

Supply and Install on load Changeover switch 415 Volt in sheet metal enclosure 4 pole of capacity 200 Amp including connecting up incoming/out going cables connection with suitable lugs and testing complete all as specified & directed by Engineer-in-Charge.

Supply and Install on load Changeover switch 415 Volt in sheet metal enclosure 4 pole of capacity 400 Ampincluding connecting up incoming/out going cables connection with suitable lugs and testing complete all as specified & directed by Engineer-in-Charge.

Material and labour for 50 mm dia galvanized iron tube light grade for cable protection, supporting to poles, plinth protections, road crossing, trenches, footpath etc, including clamps, nut bolt and washers and taking out old rusted pipe complete all as specified & directed by Engineer-in-Charge.

Material and labour for 80 mm dia galvanized iron tube light grade for cable protection, supporting to poles, plinth protections, road crossing, trenches, footpath etc, including clamps, nut bolt and washers and taking out old rusted pipe complete all as specified & directed by Engineer-in-Charge.

Material and labour for 100 mm dia galvanized iron tube light grade for cable protection, supporting to poles, plinth protections, road crossing, trenches, footpath etc, including clamps, nut bolt and washers and taking out old rusted pipe complete all as specified & directed by Engineer-in-Charge.

S & F Outdoor type bus bar chamber of suitable size made out of 2.5 mm thick CRCA steel sheet and 40x5mm angle iron frame with locking arrangement including provision of 200 Amp 8 way Aluminium busbar connecting up incoming and out going cables complete with glands and lugs and testing complete all as specified & directed by Engineer-in-Charge.

Material and labour for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to GI strip 32mm X 6mm main earthing lead by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board,LT panel etc with & including adequate quantity of charcoal dust and common salt around earth plate, PCC 1:3:6 type C-1 using 20mm graded stone aggregate for earth pit with pre cast RCC (1:2:4) type B-1 using 20mm graded stone aggregate 40mm thick cover reinforced with 8mm dia TMT bars 3 Nos both way with 12mm dia MS round bar handle, GI light grade watering pipe 20 mm dia with funnel and wire mesh, and 40 mm dia GI light grade earth lead protection pipe, complete all as specified & directed by Engineer-in-Charge.

S&F GI strip 32 x 6 mm with saddles and fixing screws on poreceling insulator/ spacer fixed at every 1 mtr length as lightening conductor on roof/wall of explosive building/ connect to LT panel or main DB and joining the same with existing earth test point all complete all as specified & directed by Engineer-in-Charge.

Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine including HDPE pipe of 150mm dia suitable for 0.4mpa working pressure all as directed.

M&L for straight through joints heat shrink type for XLPE insulated,screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electric cable 1100V grade with aluminum conductor cables of size 70 sqmm to 120 sqmm by excavating earth, identifying the fault, making proper joint of cable,testing of cable after rectification & returning soil back to earth complete all as specified & directed by Engineer-in-Charge.

M&L for straight through joints heat shrink type for XLPE insulated,screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electric cable 1100V grade with aluminum conductor cables of size 150 sqmm to 185 sqmm by excavating earth, identifying the fault, making proper joint of cable,testing of cable after rectification & returning soil back to earth complete all as specified & directed by Engineer-in-Charge.

M&L for End termination indoor / outdoor joints heat shrink type for XLPE insulated,screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electric cable 1100V grade with aluminum conductor cables of size 70 to 120 sqmm by excavating earth, identifying the fault, making proper joint of cable,testing of cable after rectification & returning soil back to earth complete all as specified & directed by Engineer-in-Charge.

M&L for End termination indoor / outdoor joints heat shrink type for XLPE insulated,screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electric cable 1100V grade with aluminum conductor cables of size 150 to 185 sqmm by excavating earth, identifying the fault, making proper joint of cable,testing of cable after rectification & returning soil back to earth complete all as specified & directed by Engineer-in-Charge.

M&L for painting of LT steel tubular pole 7.5 mtr long (above ground) after cleaning the complete body surface of pole by rubing with emery paper to remove old paint,dust etc and applying two coat of aluminium paint by brush and ZEBRA pattern with enamel paint alternating layer with yellow and black colour up to a height of 1.5m from the coping of pole and two coat of aluminium painting for the remaining portion of pole incluing numbering of poles using synthetic enamel paint complete all as specified & directed by Engineer-in-Charge.

M&L for painting of LT RCC poles pole 7.5 mtr long (above ground) after cleaning the complete body surface of pole by rubing with emery paper to remove old paint,dust etc and applying two coat of white cement based paint by brush and ZEBRA pattern with enamel paint alternating layer with yellow and black colour up to a height of 1.5m from the coping of pole and two coat of white cement based paint for the remaining portion of pole incluing numbering of poles using synthetic enamel paint complete all as specified & directed by Engineer-in-Charge.

M&L for scrapping and removing of existing paint,dust,rust by emery paper or other means and preparation of smooth surface for painting and painting with two coat of high quality synthetic enamel paint with approved colour on feeder pillar box, LT panel of any size any capacity including writting of incoming and outgoing location of all cables on LT panels and feder pillar boxs with high quality synthetic enamel paint red colour complete all as specified & directed by Engineer-in-Charge.

Supply and fixing in replacement with LT panel Digital type ammeter of range 0-600 Amp with all connected accessories including connecting up and testing complete all as specified & directed by Engineer-in-Charge.

Supply and fixing in replacement with LT panel Digital type Voltmeter of range 0-500 Volts with all connected accessories including connecting up and testing complete all as specified & directed by Engineer-in-Charge.

Supply and fixing in replacement with LT panel LED indicator lamp 240 V set of three (R,Y,B) with all connected accessories including connecting up and testing complete all as specified & directed by Engineer-in-Charge.

Supply and fixing Curent transformer (CT) 200/5A , accuracy class 1.0 , burden 10 VA burden, resin cast wound type including connecting up and testing complete all as specified & directed by Engineer-in-Charge.

S & F in Replacement of Danger notice plates, made out of 1.6mm thick MS sheet, vitreous enamelled white with letters, figures and conventional skull and bones in signal red colour and fixed with MS clamps, bolts and nuts of approved size, for LT 20X15 cm size, fixed as in repairs,complete all as specified & directed by Engineer-in-Charge.

S & F Power contactor AC, 415V, 50Hz 3 pole MNX 25 Contactor including taking down unserviceable and connecting up ,testing complete all as specified & directed by Engineer-in-Charge. Make - L&T

S & F Power contactor AC, 415V, 50Hz 3 pole MNX 40 Contactor including taking down unserviceable and connecting up ,testing complete all as specified & directed by Engineer-in-Charge.Make -L&T

S & F Power contactor AC, 415V, 50Hz 3 pole MNX 70 Contactor including taking down unserviceable and connecting up ,testing complete all as specified & directed by Engineer-in-Charge.Make- L&T

M & L for Loose filling with aggregates of gauge 40 mm filling in Panel sarrounding upto 1 to 3 mtr as per ground availability of area, cleaning the area, making level, and filling the aggregate upto 100 mm height complete all as specified & directed by Engineer-in-Charge.

Supply, installation,commisioning and testing Weather proof busbar chamber 600x450x300MM made out of 2 MM thick CRCA steel sheet & 40x5 MM angle iron frame suitable for mounting 1 mtr above ground level with locking arrangements incl. Provn of 4 Nos aluminium busbar of 400 Amps rating mounted on insulated frames 2 Nos incl. connecting up incoming & outgoing cables complete with glands,llugs incl.painted with two coats of powder coated paint over a coat of red oxide primer, including necessary PCC 1:3:6 type C1 in foundation for mounting complete all as specified & directed by Engineer-in-Charge.

Supply, installation,commisioning and testing out door type LT Panel made out of mild steel CRCA sheet of 3.15 mm thick with angle iron frame of size 50mm x 50mm x 6mm with canopy top,two side ventilators,front openable hinged, double door shutters with locking arrangement (including lock & key), weather & vermin proof suitable for operation on 440 volts, 50Hz, 3 Phase 4 wire AC supply including bus bar chamber and aluminium bus bar of suitable size 4 nos mounted on hygroscopic insulators,all pre wired with suitable size of copper conductor cable including painted with two coats of powder coated paint over a coat of red oxide zinc chrome primer on out side surface and two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer on internal surfaces and providing necessary foundation/plateform of the LT panel with PCC 1:2:4 type B2 including provision of lugs and cable gland for housing with the following fitment accessories. Incomming (a) MCCB 4 Pole, 500 Amps, 415 volt of breaking capacity not less than36 KA -1 No (b) On load Changeover switch 415 Volt 4 pole of capacity 500 Amp.-1 No (c ) Digital type ammeter composite type with suitable CT, 0-600 amps -1 No (d) Indicator lamp LED type set of three(R,Y,B) - 1 No (e) Digital type Voltmeter composite type with ,0-500 Volts -1 No Outgoing (a) MCCB 4 Pole,125 Amps, 415 volt of breaking capacity not less than 35 KA -1 No (b) MCCB 4 Pole,100 Amps, 415 volt of breaking capacity not less than 25 KA -1 No (c) MCCB 4 Pole,63 Amps, 415 volt of breaking capacity not less than 25 KA -4 No

Taking down existing defective/unservicable street light fittings/security light fitting of any capacity,any description,any wattage, any type and in any position from poles/ walls of buildings of any height complete after disconnecting the electrical connection replacement of un-serviceable/damaged/ broken spare parts/ brackets etc, re-assembling the fittings and making the light fittings serviceable, fixing the fittings in same position, connecting to electric supply and its testing on installation complete all as specified and directed by Engineer-in-Charge.

Taking down existing defective/unservicable post top lanterns/Gate lights /Garden lights fitting of any capacity,any description,any wattage, any type and in any position fixed at a height not more than 3 mtr from ground level complete after disconnecting the electrical connection replacement of un-serviceable/damaged/ broken spare parts,accessories etc, re-assembling the fittings and making the light fittings serviceable, fixing the fittings in same position, connecting to electric supply and its testing on installation complete all as specified and directed by Engineer-in-Charge.

Lowering of and lifting of carriage of high mast lights fitting with wire rope motorised or manually existing defective/unservicable high mast lights fittings of any capacity,any description,any wattage, any type,any position and any height after disconnecting the electrical connection replacement of un-serviceable/damaged/ broken spare parts/ accessories etc,including servicing of High mast of any height and description , opening the mechanical hoisting / lowering assy , steel wire bobbin , replaceing the unservieable meshing gear, easying the steel rope movements, checking the locking mechanism , replaceing of oil ,greasing complete and checking for smoothing operation of the mast, re-assembling the high mast lights fittings and making the high mast lights fittings serviceable, fixing the fittings in same position, connecting to electric supply and its testing on installation complete all as specified and directed by Engineer-in-Charge.

Supply and fixing high energy efficent constant current electronic driver suitable for LED street light fitting 45 Watts, LED luminaires 240 Volt ,50Hz, AC single phase complete all as specified and directed by Engineer-in-Charge. Make : Bajaj/Havells/Wipro.

Supply and fixing high energy efficent constant current electronic driver suitable for LED street light fitting 100 Watts, LED luminaires 240 Volt ,50Hz, AC single phase complete all as specified and directed by Engineer-in-Charge. Make : Bajaj/Havells/Wipro.

Supply and fixing high energy efficent constant current electronic driver suitable for LED Flood light fitting 60 Watts, LED luminaires 240 Volt ,50Hz, AC single phase complete all as specified and directed by Engineer-in-Charge.Make : Bajaj/Havells/Wipro.

Supply and fixing high energy efficent constant current electronic driver suitable for LED Flood light fitting 100 Watts, LED luminaires 240 Volt ,50Hz, AC single phase complete all as specified and directed by Engineer-in-Charge. Make : Bajaj/Havells/Wipro.

Supply and fixing high energy efficent constant current electronic driver suitable for LED Flood light fitting 200Watts, LED luminaires 240 Volt ,50Hz, AC single phase complete all as specified and directed by Engineer-in-Charge. Make :Bajaj/Havells/Wipro.

M&L for opening the LED fittings of any capacity,any type and in any position,taking out the LED motherbaord, checking the power LED's , replaceing the unserviceable power LED's and soldering, testing, making the light fittings serviceable fixing the fittings in same position complete all as specified and directed by Engineer-in-Charge.

M&L for dismantling the three phase motor,440 Volt ,50Hz, AC of High mast lights fittings and taking out to workshop for re-winding,removing the burntout windings, re-winding the same with super enamelled copper wire of existing guage,varnishing and oven drying , assembling and testing in position, complete all as specified and directed by Engineer-in-Charge.

Disconnecting and taking out old rusted/ unserviceable light fitting’s bracket incl FI clamps of any description and in any position and supplying and fixing brackets made out of 25 mm dia light grade GI pipe 1.50 mtr long bent to shape and size required, as in street light brackets fixed on poles/ walls using new 30x5mm FI clamps made to shape incl nuts,bolts & washers complete all as specified and directed by Engineer-in-Charge.

Disconnecting and taking out old rusted/ unserviceable light fitting’s bracket incl FI clamps of any description and in any position and supplying and fixing brackets made out of 40/50 mm dia light grade GI pipe 1.50 mtr long bent to shape and size required, as in street light brackets fixed on poles/ walls using new 30x5mm FI clamps made to shape incl nuts,bolts & washers complete all as specified and directed by Engineer-in-Charge.

Disconnecting and taking out old rusted pipe and material and labour for 25 mm dia galvanized iron tube light grade for cable protection, supporting to poles, plinth protections, road crossing, trenches, footpath etc, including clamps, nut bolt and washers complete all as specified & directed by Engineer-in-Charge.

Disconnecting and taking out old rusted pipe and material and labour for 40 mm dia galvanized iron tube light grade for cable protection, supporting to poles, plinth protections, road crossing, trenches, footpath etc, including clamps, nut bolt and washers complete all as specified & directed by Engineer-in-Charge.

Disconnecting and taking out old existing unserviceable PVC cable loop box and supplying and fixing in position PVC cable loop box, size not less than 200 mm x 140 mm x 95 mm, out door type, including 4 Nos, suitable size aluminum bus bar mounted on porcelain insulators including one no. MCB SP 230 volts 6 amps and connecting the cables to bus bars with using suitable GI nut, bolts and washers and aluminum lugs etc and fixed with pole using suitable FI clamps,nuts,bolts & washers complete all as specified & directed by Engineer-in-Charge.

Disconnecting and taking out old existing unserviceable PVC cable loop box and supplying and fixing in position PVC cable loop box, size not less than145mm x 145mm x 95mm, out door type, including one no. MCB SP 230 volts 6 amps including porcelain insulated connectors for incoming and outgoing cables and fixed with pole using sutable FI clamps,nuts,bolts & washers complete all as specified & directed by Engineer-in-Charge.

M&L for sub main wiring from street light to junction box with two single core PVC insulated cable with copper conductor multistranded 1100 volts grade 1.5 sqmm in and including heavy grade PVC conduit and its accessories with fixing arrangements on pole surface, wall, ceiling etc including 1.5 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly omplete all as specified and directed by Engineer-in-Charge. Note : One run of earth continuity conductor,one run of PVC conduit and two run of copper conductor together taken as one length for measuring unit length.

S&Fsingle core PVC insulated FR cable with multistranded copper conductor of size 2.5 sq.mm cross sectional area, 1100 Volts grade, fixed in repairs, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing MCB SP, 5-32A, 240V,50Hz ,10kA, 'B' type, for street light fittings complete all as specified and directed by Engineer-in-Charge.

Supply and fixing MCB SPN,32A, 240V,50Hz ,10kA, 'C' type,suitable for existing timer control board complete all as specified and directed by Engineer-in-Charge.

S&F 3 pole Power Contactors MO type 12 Amps AC3 rating with 1 NO +1NC Aux contacts, fixed in repairs,including taking out old existing unserviceable complete all as specified & directed by Engineer-in-Charge.Make : L&T Cat No. CS94834 or equivalent.

S&F 3 pole power Contactors MO type 18 Amps AC3 rating with 1 NO +1NC Aux contacts, fixed in repairs,including taking out old existing unserviceable complete all as specified & directed by Engineer-in-Charge. Make : L&T Cat No. CS94835or equivalent.

S&F Digital Multi function time switch with programmable fuction with battery backup and current carring capacity 16 Amps with 1 changeover including takingout the unserviceable time switch, complete all as specified & directed by Engineer-in-Charge. Make L&T or equivalent.

S&F Street light panel box 32 Amps , 3 pole, 230volts with contactor, Digital time switch ,24 hours timer , MCB TPN etc, including takingout the unserviceable street light panel box , complete all as specified & directed by Engineer-in-Charge. Make Indo Asian TL032DBO or equivalent.

S&F LED flood light fitting 30 watts,240 Volt, single phase, AC outdoor type,high pressure die cast aluminum hosing with IP66 protection with impact and corrosion resistant complete with driver and lamp including taking down unserviceable fitting, connecting and testing complete all as specified & directed by Engineer-in-Charge. Make Bajaj BJFL 30W LED or equivalent in Havells/Philips/Wipro.

S&F LED flood light fitting 50 watts,240 Volt, single phase, AC outdoor type,high pressure die cast aluminum hosing with IP66 protection with impact and corrosion resistant complete with driver and lamp including taking down unserviceable fitting, connecting and testing complete all as specified & directed by Engineer-in-Charge. Make Bajaj BJFL 50W LED or equivalent in Havells/Philips/Wipro.

S&F LED flood light fitting 100 watts,240 Volt, single phase, AC outdoor type,high pressure die cast aluminum hosing with IP66 protection with impact and corrosion resistant complete with driver and lamp including taking down unserviceable fitting, connecting and testing complete all as specified & directed by Engineer-in-Charge. Make Bajaj PRAZE F 120L WH NB-A5 TG SD or equivalent in Havells/Philips/Wipro.

S&F LED flood light fitting 200 watts,240 Volt, single phase, AC outdoor type,high pressure die cast aluminum hosing with IP66 protection with impact and corrosion resistant complete with driver and lamp including taking down unserviceable fitting, connecting and testing complete all as specified & directed by Engineer-in-Charge. Make Bajaj GLEAM F 220L WH SY PC SD V2 or equivalent in Havells/Philips/Wipro.

S&F LED street light fitting 30 watts,240 Volt, single phase, AC outdoor type,high pressure die cast aluminum hosing with IP66 protection with impact and corrosion resistant complete with driver and lamp including taking down unserviceable fitting, connecting and testing complete all as specified & directed by Engineer-in-Charge. Make Bajaj ENXT P 36L WH PO PC SD MT or equivalent in Havells/Philips/Wipro.

S&F LED street light fitting 45 watts,240 Volt, single phase, AC outdoor type,high pressure die cast aluminum hosing with IP66 protection with impact and corrosion resistant complete with driver and lamp including taking down unserviceable fitting, connecting and testing complete all as specified & directed by Engineer-in-Charge.Make Bajaj ENXT P 54L WH PO PC SD MT or equivalent in Havells/Philips/Wipro.

S&F LED street light fitting 60 watts,240 Volt, single phase, AC outdoor type,high pressure die cast aluminum hosing with IP66 protection with impact and corrosion resistant complete with driver and lamp including taking down unserviceable fitting, connecting and testing complete all as specified & directed by Engineer-in-Charge. Make Bajaj ENXT P 72L WH PO PC SD MT or equivalent in Havells/Philips/Wipro.

S&F LED post-top light fitting 25 watts made in die-cast aluminium bottom housing and spun aluminium top reflector with decorative clear acrylic diffuser and IP 65 protection with 25 watt LED buld including taking down unserviceable fitting, complete all as specified & directed by Engineer-in-Charge. Make Bajaj BGCTN 25 W LED WH or equivalent make of Havells,CG.

S&F LED post-top light fitting 25 watts with 25 watt LED buld made in spherical shape polycarbonate opal and clear diffuser with IP 65/66 protection with 25 watt LED bulb including taking down unserviceable fitting, complete all as specified & directed by Engineer-in-Charge. Make Bajaj BLPTSP 25 W WW LED or equivalent make of Havells,CG.

S&F 23 watt LED bulb including taking down unserviceable lamp, complete all as specified & directed by Engineer-in-Charge. Make - Havells,CG.

S&F 9/10 watt LED bulb including taking down unserviceable lamp, complete all as specified & directed by Engineer-in-Charge. Make - Bajaj,Havells,CG.

Material & Labour for PCC 1:4:8 type D2 using 40mm graded crushed stone aggregate as in foundation of poles.

Supply and laying in trenches /laid in floor/duct/drawn through conduit XLPE insulated,screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electric cable 1100V grade with aluminum conductor of cross sectional area 10sqmm 4 core complete all as specified and directed

M/s BHOOMI ELECTRICALS

OM ENTERPRISES

Shiva Shakthi Electrical Enterprises

SREE VARU ELECTRICALS

M/S - KRUPA ELECTRICALS

ARUNOTHAYA TRADERS

RRK PROJECTS