Construction Renovation and modification of various buildings at NSNIS Patiala Punjab under Ministry of Youth Affairs and Sports SAI Govt of India

Sl. No. Description Amount (in Rs.)

1 Renovation of Foreign Coaches Hostel. 9069871.82

2 Renovation of Weightlifting hall 12080208.76

3 Renovation of Milkha Singh Hostel 33564935.11

4 Renovation of PT Usha Hostel 26052139.69

5 Renovation of Dhyan Chand Hostel 21670152.90

6 Renovation of Guest house 16138931.76

7 Construction of Dining hall & Kitchen 70107480.84

8 Renovation of Gym Hall civil works 9325597.56

9 Setting up of Rehab Arena in swimming Pool. 3382241.96

10 Electrical & AC works 6863207.00

TOTAL 208254767

Digitally signed by OM

PRAKASH 13:58:12 IST

NAME OF WORK:- DEVELOPMENT OF NETAJI SUBHAS NATIONAL INSTITUTE OF SPORTS, PATIALA.

SH: RENOVATION AND UPGRADATION OF QUARTERS FOR FOREIGN COACHES ALLIED WORKS AT NIS , PATIALA (PUNJAB).

BILL OF QUANTITIES, FOREIGN COACHES (B)

SL ITEM No ITEMS UNIT QTY RATE AMOUNT (in Rs.)

(A) CIVIL WORK

1 2.35 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-

termite treatment (excluding the cost of chemical emulsion) :

2.35.1 Along external wall where the apron is not provided using chemical emulsion @

7.5 litres / sqm of the vertical surface of the substructure to a depth of 300 mm

including excavation channel along the wall & rodding etc. complete:

2.35.1.1 With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration Mtr 136.00 28.25 3,842.00

2 2.34 Supplying chemical emulsion in sealed containers including delivery as specified.

2.34.1 Chlorpyriphos/ Lindane emulsifiable concentrate of 20% Litre 12.24 200.85 2,458.40

3 4.1 Providing and laying in position cement concrete of specified grade excluding the

cost of centering and shuttering - All work up to plinth level :

4.1.6 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal Cum 4.00 6126.25 24,505.00

4 5.9 Centering and shuttering including strutting, propping etc. and removal

5.9.4 Shelves (Cast in situ) Sqm 4.95 693.05 3,430.60

5 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers Sqm 16.00 552.05 8,832.80

6 5.33 Providing and laying in position machine batched and machine mixed

design mix M-25 grade cement concrete for reinforced cement concrete

work, using cement content as per approved design mix, including

pumping of concrete to site of laying but excluding the cost of centering,

shuttering, finishing and reinforcement, including admixtures in

recommended proportions as per IS: 9103 to accelerate, retard setting

of concrete, improve workability without impairing strength and durability

as per direction of Engineer-in-charge.

(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less

cement used as per design mix is payable/recoverable separately).

5.33.2 All works above plinth level upto floor V level Cum 27.00 9400.85 253,822.95

SL ITEM No ITEMS UNIT QTY RATE AMOUNT (in Rs.)

7 5.35 Add for using extra cement in the items of design mix over and above Quintal 13.94 673.30 9,385.80

the specified cement content therein.

8 5.22A Steel reinforcement for R.C.C. work including straightening, cutting, bending,

placing in position and binding all complete above plinth level.

5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 1204.00 83.50 100,534.00

9 9.21 Providing and fixing ISI marked flush door shutters conforming to IS : 2202

(Part I) non-decorative type, core of block board construction with frame of 1st

class hard wood and well matched commercial 3 ply veneering with vertical

grains or cross bands and face veneers on both faces of shutters:

9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary Sqm 48.00 1886.70 90,561.60

10 9.127 Providing & Fixing decorative high pressure laminated sheet of plain / wood

grain in gloss / matt/ suede finish with high density protective surface layer and

reverse side of adhesive bonding quality conforming to IS : 2046 Type S,

including cost of adhesive of approved quality.

11 9.84 Providing and fixing aluminium extruded section body tubular type Each 2.00 851.60 1,703.20

universal hydraulic door closer (having brand logo with ISi, IS : 3564,

embossed on the body, door weight upto 36 kg to 80 kg and door width

from 701 mm to 1000 mm), with double speed adjustment with necessary

accessories and screws etc. complete.

12 9.96 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic

coating not less than grade AC 10 as per IS : 1868), transparent or dyed to

required colour or shade, with nuts and screws etc. complete :

13 9.97 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic

coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to

required colour or shade, with necessary screws etc. complete :

14 9.100 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating

not less than grade AC 10 as per IS : 1868) transparent or dyed to required

colour or shade, with necessary screws etc. complete :

SL ITEM No ITEMS UNIT QTY RATE AMOUNT (in Rs.)

15 9.101 Providing and fixing aluminium hanging floor door stopper, ISI marked,

anodised (anodic coating not less than grade AC 10 as per IS : 1868)

transparent or dyed to required colour and shade, with necessary screws etc.

9.101.2 Twin rubber stopper each 27.00 62.05 1,675.35

16 MRF-01 Providing and filling sunken portion of toilets using Autoclaved aeraed cement Cum 8.00 3879.00 31,032.00

(AAC) block bats complete in all respect.

17 MRF-02 Providing and laying Vitrified tiles in floor in different sizes (thickness to be

specified by the manufacturer), with water absorption less than 0.08% and

conforming to IS:15622, of approved brand & manufacturer, in all colours and

shade, laid on 20mm thick cement mortar 1:4 (1 cement:4 coarse sand) jointing

with grey cement slurry @3.3 kg/Sqm including grouting the joints with white

cement and matching pigments etc.The tile must be cut with the zero chipping

diamond cutter only.Laying of tiles will be done with the notch

trowel,plier,wedge,clips of required thickness,leaving system and ruber mallet

for placing the tiles gently and easily.

(Note:-The tiles should be in matt or mirror finish as required in design in the

required shade in first grade prime quality without any warping undulation,

curving or bulging of the top surface. The tiles shall be supplied and installed at

site through an expert installer including cost of all spacers and other

accessories . All samples for tiles shall be approved and before execution.)

Double charge vitrified tile polished finish of size

18 MRF-03 Providing and laying Vitrified tiles in Skirting & Dado in different sizes (thickness

to be specified by the manufacturer), with water absorption less than 0.08% and

conforming to IS:15622, of approved brand & manufacturer, in all colours and

shade, laid on 20mm thick cement mortar 1:4 (1 cement:4 coarse sand) jointing

with grey cement slurry @3.3 kg/Sqm including grouting the joints with epoxy

grout mix and matching pigments etc.The tile must be cut with the zero chipping

diamond cutter only.Laying of tiles will be done with the notch

trowel,plier,wedge,clips of required thickness,leaving system and ruber mallet

for placing the tiles gently and easily.

SL ITEM No ITEMS UNIT QTY RATE AMOUNT (in Rs.)

(Note:-The tiles should be in matt or mirror finish as required in design in the

required shade in first grade prime quality without any warping undulation,

curving or bulging of the top surface. The tiles shall be supplied and installed at

site through an expert installer including cost of all spacers and other

accessories . All samples for tiles shall be approved and before execution.)

Double charge vitrified tile polished finish of size

19 8.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and

prepolished, machine cut for kitchen platforms, vanity counters, window sills,

facias and similar locations of required size, approved shade, colour and texture

laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand),

joints treated with white cement, mixed with matching pigment, epoxy touch

ups, including rubbing, curing, moulding and polishing to edges to give high

gloss finish etc. complete at all levels.

8.2.2.2 Granite of any colour and shade. Area of slab over 0.50 sqm Sqm 5.00 4007.65 20,038.25

20 8.3 Providing edge moulding to 18 mm thick marble stone counters, Vanities

etc., including machine polishing to edge to give high gloss finish etc.

complete as per design approved by Engineer-in-Charge.

8.3.2 Granite work Metre 9.00 376.25 3,386.25

21 13.91 Removing dry or oil bound distemper, water proofing cement paint and the like Sqm 3606.00 18.25 65,809.50

by scrapping, sand papering and preparing the surface smooth including

necessary repairs to scratches etc. complete.

22 13.83 Wall painting with premium acrylic emulsion paint of interior grade, having VOC

(Volatile Organic Compound) content less than 50 grams/ litre of approved

brand and manufacture, including applying additional coats wherever required to

achieve even shade and colour.

23 13.80 Providing and applying white cement based putty of average thickness 1 mm, of Sqm 2400.00 115.15 276,360.00

approved brand and manufacturer, over the plastered wall surface to prepare

the surface even and smooth complete.

24 13.46 Finishing walls with Acrylic Smooth exterior paint of required shade :

13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including Sqm 1206.00 164.70 198,628.20

priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)

SL ITEM No ITEMS UNIT QTY RATE AMOUNT (in Rs.)

25 14.1 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5

sq.meters and under, including cutting the patch in proper shape, raking out

joints and preparing and plastering the surface of the walls complete, including

disposal of rubbish to the dumping ground, all complete as per direction of

Engineer-in-Charge.

14.1.1 With cement mortar 1:4 (1 cement : 4 fine sand) Sqm 361.00 417.80 150,825.80

26 14.90 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated

five layer, 3 mm thick water proofing membrane, black finished reinforced with

glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @

0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 -

0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of

membrane shall be laid using butane torch and sealing all joints etc., and

preparing the surface complete. The vital physical and chemical parameters of

the membrane shall be as under : Joint strength in longitudinal and transverse

direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and

transverse direction as 60/80N. Softening point of membrane not less than

150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM,

D - 5147. The laying of membrane shall be got done through the authorised

applicator of the manufacturer of membrane :

27 21.1 Providing and fixing aluminium work for doors, windows, ventilators and

partitions with extruded built up standard tubular sections/ appropriate Z

sections and other sections of approved make conforming to IS: 733 and IS:

1285, fixing with dash fasteners of required dia and size, including necessary

filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM

rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free,

straight, mitred and jointed mechanically wherever required including cleat

angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel

screws, all complete as per architectural drawings and the directions of Engineer-

in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

21.1.1 For fixed portion

27.1 21.1.1.1 Anodised aluminium (anodised transparent or dyed to required shade according kg 548.00 423.95 232,324.60

to IS: 1868, Minimum anodic coating of grade AC 15)

28 21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and

partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the

architectural drawings and the directions of engineer-in-charge . (Cost of

aluminium snap beading shall be paid in basic item)

SL ITEM No ITEMS UNIT QTY RATE AMOUNT (in Rs.)

21.3.2 With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm) Sqm 3.00 1296.40 3,889.20

29 21.8 Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work

by providing weather silicon sealant over backer rod of approved quality as per

architectural drawings and direction of Engineer-in-charge complete.

21.8.1 Upto 5mm depth and 5 mm width metre 316.00 79.45 25,106.20

30 MRF-04 Providing, assembling and supplying vision glass panels of 8mm Heat soaked, Sqm 95.00 1800.00 171,000.00

toughened tinted glass ET 425 of Saint Gobain make with soft reflective coating,

having properties complying Visual Light Transmission 23%, U value 3.80 -4.0

Watt/m2.K,SHGC less than or equal to 0.23, VLT-22 %, Light Reflection Internal

-9 % , Light Reflection External -18 %, weight of glass combination 15 Kg/m2,

all complete job as per satisfaction of Engineer-In-charge .

31 22.6 Providing and laying water proofing treatment on roofs of slabs by applying sqm 48.00 523.05 25,106.40

cement slurry mixed with water proofing cement compound consisting of

(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm

mixed with water proofing cement compound @ 0.253 kg/sqm.

(b) laying second layer of Fibre glass cloth when the first layer is still green.

Overlaps of joints of fibre cloth should not be lessthan 10 cm.

(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289

kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and

coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours

followed by water curing for 48 hours. The entire treatment will be taken upto

30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth

and final layer of brick tiling with cement mortar (which will be paid for

separately. (For the purpose of measurement the entire treated surface will be

SL ITEM No ITEMS UNIT QTY RATE AMOUNT (in Rs.)

32 22.7 Providing and laying integral cement based water proofing treatment including

preparation of surface as required for treatment of roofs, balconies, terraces etc

consisting of following operations: a) Applying a slurry coat of neat cement using

2.75 kg/sqm of cement admixed with water proofing compound conforming to

IS. 2645 and approved by Engineer-in-charge over the RCC slab including

adjoining walls upto 300 mm height including cleaning the surface before

treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25

mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand)

admixed with water proofing compound conforming to IS : 2645 and approved

by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1

cement :5 coarse sand ) admixed with water proofing compound conforming to

IS : 2645 and approved by Engineer-in-charge to required slope and treating

similarly the adjoining walls upto 300 mm height including rounding of junctions

of walls and slabs.

c) After two days of proper curing applying a second coat of cement slurry using

2.75 kg/ sqm of cement admixed with water proofing compound conforming to

IS : 2645 and approved by Engineer-in-charge. d) Finishing the surface with 20

mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand)

admixed with water proofing compound conforming to IS : 2645 and approved

by Engineer-in-charge including laying glass fibre cloth of approved quality in

top layer of plaster and finally finishing the surface with trowel with neat cement

slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole

terrace so finished shall be flooded with water for a minimum period of two

weeks for curing and for final test. All above operations to be done in order and

as directed and specified by the Engineer-in-Charge :

22.7.1 With average thickness of 120 mm and minimum thickness at khurra as 65 mm. Sqm 60.00 1398.50 83,910.00

33 15.12 Dismantling doors, windows and clerestory windows (steel or wood) shutter

including chowkhats, architrave, holdfasts etc. complete and stacking within 50

15.12.1 Of area 3 sq. metres and below each 27.00 274.50 7,411.50

34 15.13 Taking out doors, windows and clerestory window shutters (steel or wood)

including stacking within 50 metres lead :

15.13.1 Of area 3 sq. metres and below each 27.00 106.55 2,876.85

35 15.23 Dismantling tile work in floors and roofs laid in cement mortar including stacking

material within 50 metres lead.

15.23.1 For thickness of tiles 10 mm to 25 mm sqm 156.00 54.85 8,556.60

SL ITEM No ITEMS UNIT QTY RATE AMOUNT (in Rs.)

36 15.26 Demolishing brick tile covering in terracing including stacking of serviceable sqm 20.00 79.60 1,592.00

material and disposal of unserviceable material within

50 metres lead.

37 MRF-05 Providing and applying at all floors, heights and locations stone based texture Sqm 133.95 988.90 132,460.19

finish suitable for External use of approved make made from natural Granite

stone based materials and Bonding agent made from pure acrylic co-polymer

emulsion, Broad fungicide and Bonding agent mixed to a recommended quantity

of water and applied with a trowels on to the surface, to be finished, in an

average uniform coat of minimum 2mm covering an area of about 0.5 sqm/kg of

the mix for uniform finish without anu irregularties and discontinous on large

surface area giving a uniform surface texture and applied by a trained texture

applicators in a single coat. The finish shall be anti fading and non pigmented

type with resistance to weathering. Any Grooves and Panels to be formas a part

of the design shall deemed to be inclusive in the cost. The texture shall be

applied shall be applied over a surface coat of cement primer after duly clearing

off any unwanted scratches and undulations by sand papering or using a wire

brush before actual application begin complete including cost of all material,

labour, machinery, T&P, curing, all leads, lifts and sampling, testing and water

arrangements complete as per drawings, requirements, specification and as

directed by the Architect / Employer.

38 MRF-06 Supply and Installation of Factory Made Modular kitchen (Type-3) for Visiting Set 12.00 320000.00 3,840,000.00

Faculty Residences Kitchen as per schematic drawings. Vendor shall prepare a

detailed shop drawing considering actual site dimensions with provision for all

required services (Eg. Electrical, Plumbing, Gas, Chimney Exhaust,etc..) The

Kitchen shall comprise the following items: a. Plywood: BWP Grade Architect Ply

as per IS-710 (Greenply, Century) b. Laminate: Shutter: 1.0 mm High Gloss

Laminate. Insife: 0.8 mm Laminate c. Cabinets - Required Cabinets as per

Drawing. d. Partition covering kota stone: 6mm ply with 0.8mm laminate on

outside d. Drawer System - NOVA Sleek/DWD GRASS including all accessories.

e. Hardwares: Soft Close hardwares from Sleek/ Hettich / Blum. f. Drawer

storage organizer:Plain Tray, Cutlery Tray, Anti Slip mat in all drawers and

cabinets, Rount DustBin, Cargo Plus Thali. All items are from Hettich. g. Profile

Handle for shutters and drawers: Aluminum Profile handle (G Type) from Hettich

as selected by Architect All shutters shall have PVC Edge Bands on all four sides.

Finish of PVC Edge band shall as per architects selection. The modular kitchen

shall have a 5 Years Warantee against Manufacturing defect. The work shall be

complete including all the required accessories for fixing the kitchen at site as

per drawing and to the satisfaction of Architect.

CIVIL WORKS TOTAL = 6,742,730.20

SL ITEM No ITEMS UNIT QTY RATE AMOUNT (in Rs.)

(B) PLUMBING WORKS

39 17.3 Providing and fixing white vitreous china pedestal type water closet (European

type) with seat and lid, 10 litre low level white vitreous china flushing cistern &

C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow

arrangement with specials of standard make and mosquito proof coupling of

approved municipal design complete, including painting of fittings and brackets,

cutting and making good the walls and floors wherever required :

17.3.1 W.C. pan with ISI marked white solid plastic seat and lid each 11.00 6685.00 73,535.00

40 17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre each 11.00 297.55 3,273.05

long with S.S. triangular plate to Eureopean type W.C. of quality and make as

approved by Engineer - in - charge.

41 MRF-07 Providing & fixing of white vitreous china counter top self rimming basin oval each 11.00 8899.30 97,892.30

type (size 56X41 cm) with CP brass waste assembly, wall flanges and rubber

adapters for waste connection complete including CI/MS brackets duly painted,

nuts, washers, cutting and making good the walls floors wherever required as

per direction of Engineer-Incharge. ( Hindware Cat no. 10045)

Semi Recessed Wash Basin Hindware Cat no. 10045

Pushmatic Pillar Cock (2Nos) Auto Closing Hindare cat no. F310001 (One Each

for Fresh Water and Hot Water)

42 17.32.4 Providing and fixing mirror of superior glass (of approved quality) and of Each 10.00 1786.55 17,865.50

required shape and size with plastic moulded frame of approved make and

shade with 6 mm thick hard board backing :Rectangular shape 1500x450 mm

43 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, each 21.00 228.20 4,792.20

200 mm wide with minimum distances of 37 mm from wall face with

concealed fittings arrangement of approved quality and colour,

weighing not less than 88 gms.

44 17.73 Providing and fixing PTMT towel rail complete with brackets fixed to

wooden cleats with CP brass screws with concealed fittings arrangement of

approved quality and colour.

17.73.1 450 mm long towel rail with total length of 495 mm,78 mm wide and effective each 11.00 555.35 6,108.85

height of 88 mm, weighing not less than 170 gms

SL ITEM No ITEMS UNIT QTY RATE AMOUNT (in Rs.)

45 MRF-08 Providing and fixing in position SWR UPVC soil waste vent or antisyphonage

pipes as per IS-13592 (working pressure of 6kg /cm2) including cutting, jointing

with approve solvent cement compound as per IS-14735, wastage etc complete

as per manufacturer's specifications and as per direction of the Engineer In-

charge. (Supreme or approved equivalent)

Double socket B Type

110mm dia SWR UPVC pipe lines laid complete Mtr 199.00 698.35 138,971.65

46 MRF-09 Providing and fixing in position SWR UPVC special for soil waste vent or anti

syphonage pipes as per IS-13592 and IS - 14735 including cutting and wastage

etc. cutting holes in walls roofs or floors etc. and making good to its original

condition complete as per manufacturer's specifications and as per direction of

the Engineer In-charge. (Supreme or approved equivalent)

For 110 mm dia pipes

46.2 (ii) 110mm dia Heal Rest Bend Nos 12.00 297.45 3,569.40

46.3 (iii) 110 mm dia Single Junction 110 mm x 110 mm x 110 mm Nos 24.00 354.35 8,504.40

46.5 (vi) 110 mm dia collars (coupless) Nos 24.00 148.40 3,561.60

47 MRF-10 Providing and fixing in position Square stainless steel Cockroach floor Traps Nos 33.00 758.70 25,037.10

square size 127x127 mm with stainless steel floor drain grating, inner filter,

outer filter, rim etc. complete including cost of cutting and making good the

walls floors at all heights, levels, including cost of all material such as

concrete/mortar etc. as per directions of the Engineer-in-charge. ( Viking,

Chilly Cat no CCT-SFC-127 or Approved Equivalent make)

48 MRF-11 Providing and fixing 2" dia perforated PVC filter including Nylon jali wrapped all Rmt 72.00 150.00 10,800.00

around complete in all respects connected to the vertical stack of same size (To

Drain out Water from sunken portion)

SL ITEM No ITEMS UNIT QTY RATE AMOUNT (in Rs.)

49 17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per

IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting

of fittings and brackets, cutting and making good the walls wherever required :

17.10.2 Kitchen sink without drain board

50 MRF-11 Providing and fixing in position stainless steel pipe clamps with EPDM rubber

lining for wall mounted vertical wall with making hole in wall for nuts and bolt

etc complete in all respects as per direction of the Engineer in charge (Make

For 110 mm dia pipe Nos 66.00 233.20 15,391.20

51 18.49 Providing and fixing C.P. brass bib cock of approved quality conforming

52 18.50 Providing and fixing C.P. brass long nose bib cock of approved quality

conforming to IS standards and weighing not less than 810 gms.

53 MRF-12 Providing & fixing in position Angular stop cock with wall flange with necessary Nos 22.00 1912.45 42,073.90

fixtures complete including cutting and making good the walls wherever

required as per direction of the Engineer in charge. (Jaquar Cat no.VGP-CHR-

81053 or approved equivalent)

54 18.52 Providing and fixing C.P. brass stop cock (concealed) of standard design and of

approved make conforming to IS:8931.

55 18.64 Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not Each 11.00 111.75 1,229.25

less than 40 gms

56 18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth Each 11.00 130.50 1,435.50

102mm, height of 75mm with concealed fitting arrangements, weighing not less

57 18.22 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :

SL ITEM No ITEMS UNIT QTY RATE AMOUNT (in Rs.)

58 19.30 Constructing brick masonry chamber for underground C.I. inspection

chamber and bends with bricks in cement mortar 1:4 (1 cement : 4

coarse sand) C.I. cover with frame (light duty) 455x610 mm internal

dimensions, total weight of cover with frame to be not less than 38

kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab

with 1:1.5:3 mix (1 cement : 1.5 Fine sand : 3 graded stone

aggregate 20 mm nominal size), foundation concrete 1:5:10 (1

cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal

size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement

: 3 coarse sand), finished smooth with a floating coat of neat cement

on walls and bed concrete etc. complete as per standard design:

19.30.3 Inside dimension 600X850 mm and 45 cm deep for pipe line with three or more

19.30.3.1 With common burnt clay F.P.S (non modular) bricks of class designation 7.5 Each 6.00 8079.30 48,475.80

59 MRF-13 Providing and fixing square-mouth PVC gully trap of size 110 x 110 mm Nos 6.00 3963.70 23,782.20

complete with brick masonry chamber with water tight C.I. cover with frame of

300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and

frame to be not less than 2.70 kg as per standard design complete in all respect

to complete Satisfaction of Engineer-in-charge:With Fly ash lime bricks (FALG

Bricks) conforming to I.S. 12894. Astral/ Supreme/Finolex or equalent

make size 110 x 110 mm Cat no.M142003409

60 17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C.

waste fittings complete.

17.28.2 Flexible pipe

61 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal

stability for hot & cold water supply, including all CPVC plain & brass threaded

fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes

jointing of pipes & fittings with one step CPVC solvent cement and testing of

joints complete as per direction of Engineer in Charge.

Internal work - Exposed on wall

61.1 18.7.3 25 mm nominal outer dia Pipes metre 71.00 369.20 26,213.20

SL ITEM No ITEMS UNIT QTY RATE AMOUNT (in Rs.)

61.2 18.7.4 32 mm nominal outer dia Pipes metre 32.00 480.55 15,377.60

61.3 18.7.5 40 mm nominal outer dia Pipes metre 18.00 648.60 11,674.80

62 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal

stability for hot & cold water supply, including all CPVC plain & brass threaded

fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing

of pipes & fittings with one step CPVC solvent cement and the cost of cutting

chases and making good the same including testing of joints complete as per

direction of Engineer in Charge.

Concealed work, including cutting chases and making good the walls etc.

62.1 18.8.1 15 mm nominal outer dia Pipes metre 99.00 409.65 40,555.35

62.2 18.8.2 20 mm nominal outer dia Pipes metre 53.00 478.15 25,341.95

63 18.21 Providing and fixing uplasticised PVC connection pipe with brass unions :

18.21.2 45 cm length

64 18.19 Providing and fixing gun metal non- return valve of approved quality (screwed

64.1 18.19.1.2 25 mm nominal bore (Vertical) each 3.00 504.45 1,513.35

64.2 18.19.2.2 32 mm nominal bore (Vertical) each 3.00 708.65 2,125.95

64.3 18.19.3.2 40 mm nominal bore (Vertical) each 2.00 979.70 1,959.40

65 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage per litre 4000.00 8.80 35,200.00

tank, IS : 12701 marked, with cover and suitable locking arrangement and

making necessary holes for inlet, outlet and overflow pipes but without fittings

and the base support for tank.

66 15.42 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including

stacking the material within 50 metres lead :

SL ITEM No ITEMS UNIT QTY RATE AMOUNT (in Rs.)

67 15.44 Dismantling G.I. pipes (external work) including excavation and refilling

trenches after taking out the pipes, manually/ by mechanical means including

stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :

15.44.1 15 mm to 40 mm nominal bore metre 273.00 108.15 29,524.95

68 15.45 Dismantling C.I. pipes including excavation and refilling trenches after taking out

the pipes, manually/ by mechanical means breaking lead caulked joints, melting

of lead and making into blocks including stacking of pipes & lead at site within

50 metre lead as per direction of Engineer-in-charge:

69 15.49 Taking out C.I. cover with frame from R.C.C. top slab of inspection chambers of each 6.00 292.25 1,753.50

various sizes including demolishing of R.C.C. work manually/ by mechanical

means and stacking of useful materials near the site and disposal of

unserviceable materials within 50 metres lead as per direction of Engineer-in-

70 15.52 Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including each 11.00 668.15 7,349.65

stacking of useful materials near the site and disposal of unserviceable materials

within 50 metres lead.

71 MRF-14 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes of

approved make conforming to IS : 13592 Type B, including jointing with seal

ring conforming to IS : 14735, (working pressure of 6kg /cm2) leaving 10 mm

gap for thermal expansion, (i) Single socketed pipes.

72 MRF-15 Providing and fixing on wall face unplasticised - PVC moulded fittings/

accessories for unplasticised Rigid PVC rain water pipes of approved make

conforming to IS : 13592 Type A (working pressure of 6kg /cm2), including

jointing with seal ring conforming to IS : 14735, leaving 10 mm gap for thermal

73 2.6 Earth work in excavation by mechanical means (Hydraulic excavator)/manual

means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm

on plan) including getting out and disposal of excavated earth lead upto 50 m

and lift upto 1.5 m, as directed by Engineer-in-charge.

SL ITEM No ITEMS UNIT QTY RATE AMOUNT (in Rs.)

2.6.1 All kinds of soil. Cum 18.00 181.85 3,273.30

74 4.1 Providing and laying in position cement concrete of specified grade excluding the

cost of centering and shuttering - All work up to plinth level :

4.1.10 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm Cum 0.90 5520.30 4,968.27

75 MRF-16 Providing, Laying, Jointing,cutting and testing PVC pipe and special SN - 8 pipe

of approved make for under ground Sewer system as per IS - 15328, complete

in all respects as per the direction of the Engineer in charge.

76 19.21 Making connection of drain or sewer line with existing manhole including

breaking into and making good the walls, floors with cement concrete 1:2:4 mix

(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse

sand), finished with a floating coat of neat cement and making necessary

channels for the drain etc. complete :

19.21.1 For pipes 100 to 250 mm diameter Each 6.00 623.50 3,741.00

77 MRF-17 Supplying, assembling & placing (as required as site) of make Storwel plain Nos 11.00 35000.00 385,000.00

shall have an overall size of 916 mm (W)x486 mm (D)x1980 mm (H) with

welded construction. It should have the shelf thickness of 0.7 mm, Back

thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other

components shall have a thickness of 0.9mm. These components shall be made

of CRCA ‘D’ grade high yield strength as per IS:513. The Storwel Plain should

have a Mazak handle and Three way locking mechanism with Shooting Bolts. It

should have a height wise adjustable shelf mounting which shall have a

Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10

Screw type Leveller with Hex plastic base. The finishing shall include Epoxy

powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options

and shelving options shall be available complete as per direction & satisfaction of

Engineer in charge.

PLUMBING WORKS TOTAL = 1,475,167.62

III INTERNAL ELECTRICAL WORK (DSR ITEMS)

SL ITEM No ITEMS UNIT QTY RATE AMOUNT (in Rs.)

78 1.15 Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5

sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm

FRLS PVC insulated copper conductor single core cable as earth wire in existing

surface/ recessed steel/PVC conduit including dismantling as required.

79.0 1.14 Wiring for circuit/ submain wiring alongwith earth wire with the following

sizes of FRLS PVC insulated copper conductor, single core cable in

surface/ recessed medium class PVC conduit as required.

CIRCUIT / SUBMAIN WIRING

a 1.14.1 2x1.5 sq mm + 1x1.5 sq mm earth wire Metre 450.00 146.00 65,700.00

b 1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 220.00 200.00 44,000.00

c 1.14.2 2x2.5 sq mm + 1x2.5 sq mm earth wire Metre 450.00 167.00 75,150.00

d 1.14.4 2x6 sq mm + 1x6 sq mm earth wire. Metre 70.00 249.00 17,430.00

e 1.14.9 4x6 sq mm + 2x6 sq mm earth wire. Metre 85.00 394.00 33,490.00

80.0 1.21 Supplying and fixing of following sizes of medium class PVC conduit

alonwith the accessories in surface/recess including painting in case of

surface conduit, or cutting the wall and making good the same in case of

recessed conduit as required. ( Conduits for Structural cabling and CCTV)

81.0 1.24 Supplying and fixing following modular switch/ socket on the existing

modular plate & switch box including connections but excluding modular

plate etc. as required.

c 1.24.4 3 pin 5/6 amp socket outlet Each 25.00 111.00 2,775.00

d 1.24.5 6 pin 15/16 amp socket outlet Each 15.00 175.00 2,625.00

82.0 1.25 Supplying and fixing two module stepped type electronic fan regulator on the Each 48.00 342.00 16,416.00

existing modular plate switch box including connections but excluding modular

plate etc. as required.

SL ITEM No ITEMS UNIT QTY RATE AMOUNT (in Rs.)

83.0 1.26 Supplying and fixing modular blanking plate on the existing modular plate & Each 48.00 32.00 1,536.00

switch box excluding modular plate as required.

84.0 1.27 Supplying and fixing following size/ modules, GI box alongwith modular

base & cover plate for modular switches in recess etc as required.

c 1.27.4 6 Module (200mmX75mm) - For Socket outlet. Each 20.00 333.00 6,660.00

d 1.27.5 8 Module (125mmX125mm) - For Socket outlet. Each 28.00 383.00 10,724.00

85.0 1.34 Supplying and fixing brass batten/ angle holder including connection etc. as Each 11.00 117.00 1,287.00

86.0 2.4 Supplying and fixing following way, horizontal type three pole and neutral, sheet

steel, MCB distribution board, 415 volts, on surface/recess, complete with

tinned copper bus bar, neutral bus bar, earth bar, din bar,

interconnections, powder painted including earthing etc. as required. (But

without MCB/RCCB/Isolator)

87.0 2.10 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature

circuit breaker suitable for inductive load of following poles in the existing MCB

DB complete with connections, testing and commissioning etc. as required.

a 2.10.1 Single pole Each 3.00 199.00 597.00

b 2.10.2 Single pole and neutral Each 4.00 544.00 2,176.00

c 2.10.3 Double pole Each 1.00 556.00 556.00

88.0 2.11 Supplying and fixing single pole blanking plate in the existing MCB DB complete Each 18.00 8.00 144.00

etc. as required.

89.0 2.12 Supplying and fixing following rating, double pole, 240 volts, isolator in the

existing MCB DB complete with connections, testing and commissioning

etc. as required.

90.0 2.13 Supplying and fixing following rating, four pole, 415 volts, isolator in the

existing MCB DB complete with connections, testing and commissioning

etc. as required.

SL ITEM No ITEMS UNIT QTY RATE AMOUNT (in Rs.)

91.0 2.14 Supplying and fixing following rating, double pole, (single phase and neutral),

240 V, residual current circuit breaker (RCCB), having a sensitivity current 30

mA in the existing MCB DB complete with connections, testing and

commissioning etc. as required.

92.0 NSF-18 Supply of 20W 4 ft batten with Exturded Aluminium/CRCA Housing, PMMA Non Each 36.00 644.00 23,184.00

Yellowing Diffuser. Luminaire should have minimum efficacy of 100

lumens/W.The luminaire should have a color temperature of 5700K ,Input

Frequency 50 HZ,Operating Voltage minimum 150-270V AC supply and CRI>80.

Driver of the luminaire shall have THD < 20% , PF>0.95,IP-40 or higher and

inbuilt surge protection minimum of 2kV. Luminaire should atleast have lifeclass

of 50000 burning hours . LM 79 report to be submitted for luminaire from NABL

accrediated lab and LM 80 for LED source issued by LED manufacture. LED shall

have reverse polarity, open and short circuit protection,under voltage and over

voltage protection. Type of driver and its DC output - Constant current Output

driver and less than 60V DC Output and Efficiency of driver > 85%.

93.0 NSF-19 Supply and erection of Surface mounted circular LED Downighter, 9 watt, CAT Each 40.00 800.00 32,000.00

No. CRDL11SO13HP57 of Wipro Make & all petty materials required to complete

the job in all respects of Philips / Wipro / Bajaj make as approved by the

Engineer in charge.

94.0 NSF-20 Supply of AC 300 mm sweep, 230/20 vplts 50Hz exhaust fan (heavy duty) with each 15.00 2200.00 33,000.00

blade, cover etc. complete as required.

95.0 NSF-21 Supply of 312mm x 312mm Surface Mounted LED fixture with dimmable ballast each 24.00 1500.00 36,000.00

with CRCA powder coated housing, high efficiency diffuser, PF≥0.95, THD<10%

& surge proctection of ≥ 2.5kv, lumen maintainence of 70% at the end of 50000

burning hours, having lumen output not less than 3200 Lumens with luminaire

efficacy of not less than 125 Lumens / watt with CRI >80,operating range 150V

– 270V, 50Hz AC supply, CCT 5700K -6500K. The luminaire is IP 20 protected.

LM 79 report to be submitted for luminaire from NABL accrediated lab and LM 80

for LED source issued by LED manufacture. LED shall have reverse polarity,

open and short circuit protection. (Make:- Philips CAT No. SM200C LED16S

6500 PSU OD WH , Crompton/Wipro or equivalent)

96.0 NS-22 Main Panel - Design , supply & erection & commissioning Each 1.00 150000.00 150,000.00

of following distribution panels made of 2 mm thick

CRCA Steel Sheets , floor mounted fully enclosed ,

compartmentalized , dust & vermin Proof with hinged & Page 18

SL ITEM No ITEMS UNIT QTY RATE AMOUNT (in Rs.)

lockable doors & complete with earthing , painting as

630 Amp, 50 Kva, MCCB with following

Metering & controls

ON/OFF phase indicating lamps with control Fuses

Ammeter complete with CT & Selector as required

Voltmeter complted with selector switches as required

B.) Section - 2

400 A TPN , Al.Bus Bars with heat Shrinkable PVC

Sleeves as required.

C.) Sections - 3

125Amp - 04 Nos, 63Amp-10 nos

MCB as required & design.

ELECTRICAL WORKS TOTAL = 762,646.00

FIRE FIGHTING WORKS

97.0 NS-23 Supply, installation, testing and commissioning ISI marked (IS:15683) Fire Each 8.00 7181.00 57,448.00

Extinguisher, Carbon-di-oxide type capacity 4.5 Kg. Flat base including valve,

discharge hose of not less than 10 mm dia, 1M long and complete in all respects

including initial fill with CO2 gas conforming to IS:307-1966 and wall suspension

braket as required as per specifications

98.0 NS-24 Supply, installation, testing and commissioning of 6kg ABC (Powder Type) Fire Each 8.00 3985.00 31,880.00

Extinguisher. Mild Steel Cylinders ISI marked fitted with pressure indicating

gauge, internal tube, squeeze lever type valve fully charged with ABC 90 powder

(Mono Ammonium Phosphate) pressured by Nitrogen complete in all respects

including wall suspension bracket and conforming to IS:15683 as required as

per specifications.

FIRE FIGHTING WORKS TOTAL = 89,328.00

NAME OF WORK:- DEVELOPMENT OF NETAJI SUBHAS NATIONAL INSTITUTE OF SPORTS, PATIALA.

SH: RENOVATION AND UPGRADATION OF WEIGHT LIFTING HALL AND ALLIED WORKS AT NIS , PATIALA (Pb.).

BILL OF QUANTITIES

SL No. ITEM No. DESCRIPTION UNIT Qty RATE (in Rs.) AMOUNT (in RS.)

(A) EARTH WORK

1 2.35 Diluting and injecting chemical emulsion for POST-CONSWTRUCTIONAL anti-termite treatment

(excluding the cost of chemical emulsion) :

2.35.1 Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm

of the vertical surface of the substructure to a depth of 300 mm including excavation channel

along the wall & rodding etc. complete:

2.35.1.1 With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration Mtr 223 28.25 6,299.75

2 2.34 Supplying chemical emulsion in sealed containers including delivery as specified.

2.34.1 Chlorpyriphos/ Lindane emulsifiable concentrate of 20% Ltr 20.07 200.85 4,031.06

B) CONCRETE WORK

3 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of

centering and shuttering - All work up to plinth level :

3.1 4.1.6 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 40 mm nominal size) Cum 160.00 6,126.25 980,200.00

4 5.9 Centering and shuttering including strutting, propping etc. and removal of form for

5.9.4 Shelves (Cast in situ) Sqm 9.83 693.05 6,812.68

5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers Sqm 12.39 552.05 6,837.42

5 5.33 Providing and laying in position machine batched and machine mixed design mix M-25 grade

cement concrete for reinforced cement concrete work, using cement content as per approved

design mix, including pumping of concrete to site of laying but excluding the cost of centering,

shuttering, finishing and reinforcement, including admixtures in recommended proportions as

per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing

strength and durability as per direction of Engineer-in-charge.

(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as

per design mix is payable/recoverable separately).

5.33.2 All works above plinth level upto floor V level Cum 2.92 9400.85 27,451.53

SL No. ITEM No. DESCRIPTION UNIT Qty RATE (in Rs.) AMOUNT (in RS.)

6 5.35 Add for using extra cement in the items of design mix over and above Quintal 1 673.3 673.30

the specified cement content therein.

7 5.22A.6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in

position and binding all complete above plinth level.

Thermo-Mechanically Treated bars (Fe-500D) or more. kg 438.0 83.5 36,574.39

E) MARBLE & GRANITE WORK

8 8.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished,

machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of

required size, approved shade, colour and texture laid over 20 mm thick base cement mortar

1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching

pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give

high gloss finish etc. complete at all levels.

8.2.2.2 Granite of any colour and shade (Area of slab over 0.50 sqm) Sqm 5 4,007.65 20,038.25

9 8.3 Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including

machine polishing to edge to give high gloss finish etc. complete as per design approved by

Engineer-in-Charge.

8.3.2 Granite stone Rmt 8 376.25 3,010.00

10 11.3 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished

with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of

steps etc. complete.

11.3.1 40 mm thick with 20 mm nominal size stone aggregate Sqm 60 498.35 29,901.00

11 NSW-01 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the

manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of

approved brand & manufacturer, in all colours and shade, laid on 20mm thick cement mortar

1:4 (1 cement:4 coarse sand) jointing with grey cement slurry @3.3 kg/Sqm including grouting

the joints with white cement and matching pigments etc.The tile must be cut with the zero

chipping diamond cutter only.Laying of tiles will be done with the notch trowel,plier,wedge,clips

of required thickness,leaving system and ruber mallet for placing the tiles gently and easily.

SL No. ITEM No. DESCRIPTION UNIT Qty RATE (in Rs.) AMOUNT (in RS.)

(Note:-The tiles should be in matt or mirror finish as required in design in the required shade in

first grade prime quality without any warping undulation, curving or bulging of the top surface.

The tiles shall be supplied and installed at site through an expert installer including cost of all

spacers and other accessories . All samples for tiles shall be approved and before execution.)

Double charge vitrified tile polished finish of size

12 NSW-02 Providing and laying Vitrified tiles in Skirting & Dado in different sizes (thickness to be specified

by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of

approved brand & manufacturer, in all colours and shade, laid on 20mm thick cement mortar

1:4 (1 cement:4 coarse sand) jointing with grey cement slurry @3.3 kg/Sqm including grouting

the joints with epoxy grout mix and matching pigments etc.The tile must be cut with the zero

chipping diamond cutter only.Laying of tiles will be done with the notch trowel,plier,wedge,clips

of required thickness,leaving system and ruber mallet for placing the tiles gently and easily.

(Note:-The tiles should be in matt or mirror finish as required in design in the required shade in

first grade prime quality without any warping undulation, curving or bulging of the top surface.

The tiles shall be supplied and installed at site through an expert installer including cost of all

spacers and other accessories . All samples for tiles shall be approved and before execution.)

Double charge vitrified tile polished finish of size

13 14.90 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3

mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting

of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane

manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the

primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc.,

and preparing the surface complete. The vital physical and chemical parameters of the

membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as

350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening

point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in

accordance with ASTM, D - 5147. The laying of membrane shall be got done through the

authorised applicator of the manufacturer of membrane :

G) Roofing Work

SL No. ITEM No. DESCRIPTION UNIT Qty RATE (in Rs.) AMOUNT (in RS.)

14 22.7 Providing and laying integral cement based water proofing treatment including preparation of

surface as required for treatment of roofs, balconies, terraces etc consisting of following

operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed

with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge

over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface

before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to

115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water

proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm

thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water

proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required

slope and treating similarly the adjoining walls upto 300 mm height including rounding of

junctions of walls and slabs.

c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm

of cement admixed with water proofing compound conforming to IS : 2645 and approved by

Engineer-in-charge. d) Finishing the surface with 20 mm thick jointless cement mortar of mix

1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645

and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top

layer of plaster and finally finishing the surface with trowel with neat cement slurry and making

pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded

with water for a minimum period of two weeks for curing and for final test. All above operations

to be done in order and as directed and specified by the Engineer-in-Charge :

22.7.1 With average thickness of 120 mm and minimum thickness at khurra as 65 mm. Sqm 1,740.00 1,398.50 2,433,390.00

15 26.27.3 Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of Sqm 101.14 2,128.25 215,258.87

approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%,

Light Reflectance > 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as

per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all

round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T

runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and

secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size

600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50

mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod

up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm

centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the

help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be

fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry

wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support

system shall be pre-painted with polyester baked paint, for all heights. The work shall be

carried out as per specifications, drawings and as per directions of the engineer-incharge.

With 16 mm thick beveled tegular mineral fibre Antimicrobial false ceiling tile confirming to ISO

5 (class 100 ) specifications

SL No. ITEM No. DESCRIPTION UNIT Qty RATE (in Rs.) AMOUNT (in RS.)

16 NSW-03 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes of approved make

conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS : 14735,

(working pressure of 6kg /cm2) leaving 10 mm gap for thermal expansion, (i) Single socketed

17 NSW-04 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for

unplasticised Rigid PVC rain water pipes of approved make conforming to IS : 13592 Type A

(working pressure of 6kg /cm2), including jointing with seal ring conforming to IS : 14735,

leaving 10 mm gap for thermal expansion.

18 13.91 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, Sqm 4235 18.25 77,282.08

sand papering and preparing the surface smooth including necessary repairs to scratches etc.

19 13.83 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile

Organic Compound) content less than 50 grams/ litre of approved brand and manufacture,

including applying additional coats wherever required to achieve even shade and colour.

20 14.1 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under,

including cutting the patch in proper shape, raking out joints and preparing and plastering the

surface of the walls complete, including disposal of rubbish to the dumping ground, all

complete as per direction of Engineer-in-Charge.

14.1.1 With cement mortar 1:4 (1 cement : 4 fine sand) Sqm 1059 417.80 442,450.20

21 13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved Sqm 3455.6346 115.15 397,916.32

brand and manufacturer, over the plastered wall surface to prepare the surface even and

smooth complete.

22 13.46 Finishing walls with Acrylic Smooth exterior paint of required shade :

13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of Sqm 780.00 164.70 128,466.00

exterior primer applied @ 2.20 kg/ 10 sqm)

SL No. ITEM No. DESCRIPTION UNIT Qty RATE (in Rs.) AMOUNT (in RS.)

23 NSW-05 Providing and applying at all floors, heights and locations stone based texture finish suitable for Sqm 86.54 988.90 85,577.23

External use of approved make made from natural Granite stone based materials and Bonding

agent made from pure acrylic co-polymer emulsion, Broad fungicide and Bonding agent mixed

to a recommended quantity of water and applied with a trowels on to the surface, to be

finished, in an average uniform coat of minimum 2mm covering an area of about 0.5 sqm/kg of

the mix for uniform finish without anu irregularties and discontinous on large surface area

giving a uniform surface texture and applied by a trained texture applicators in a single coat.

The finish shall be anti fading and non pigmented type with resistance to weathering. Any

Grooves and Panels to be formas a part of the design shall deemed to be inclusive in the cost.

The texture shall be applied shall be applied over a surface coat of cement primer after duly

clearing off any unwanted scratches and undulations by sand papering or using a wire brush

before actual application begin complete including cost of all material, labour, machinery, T&P,

curing, all leads, lifts and sampling, testing and water arrangements complete as per drawings,

requirements, specification and as directed by the Architect / Employer.

24 9.21 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-

decorative type, core of block board construction with frame of 1st class hard wood and well

matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on

both faces of shutters:

9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws Sqm 54 1,886.70 102,815.72

25 9.127 Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss /

matt/ suede finish with high density protective surface layer and reverse side of adhesive

bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.

26 9.96 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less

than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts

and screws etc. complete :

27 9.97 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than

grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary

screws etc. complete :

SL No. ITEM No. DESCRIPTION UNIT Qty RATE (in Rs.) AMOUNT (in RS.)

28 9.100 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than

grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary

screws etc. complete :

29 9.101 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic

coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and

shade, with necessary screws etc. complete.

9.101.2 Twin rubber stopper each 19.00 62.05 1,178.95

30 21.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with

extruded built up standard tubular sections/ appropriate Z sections and other sections of

approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia

and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with

required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free,

straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium

snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per

architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash

fasteners to be paid for separately) :

21.1.1 For fixed portion

30.1 21.1.1.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, kg 387.0615 423.95 164,094.72

Minimum anodic coating of grade AC 15)

31 21.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and

making provision for fixing of fittings wherever required including the cost of EPDM rubber /

neoprene gasket required (Fittings shall be paid for separately)

21.1.2.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: kg 18 513.40 9,487.63

1868, Minimum anodic coating of grade AC 15)

32 21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc.

with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the

directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

21.3.2 With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm) Sqm 8 1,296.40 10,371.20

33 10.29.2 Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat

15x3 mm and nuts & bolts complete.

Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides Sqm 2 929.55 1,859.10

14.80 Providing & fixing White vitreous china water closet squatting pan (Indian type) along with “S”

SL No. ITEM No. DESCRIPTION UNIT Qty RATE (in Rs.) AMOUNT (in RS.)

34 NSW-06 Taking out existing wooden door shutter, as required, all complete as per the direction of the each 28 297.85 8,339.80

Engineer-in-charge.

(J) ACOUSTIC PANELLING

35 NSW-07 Providing and Fixing Channelled Woodworks perforated panels of Himalyan or equal of width Sqm 320 5,350.41 1,712,131.20

128 mm, thickness of 15 mm and length 2440 mm or as required by the Architect/ Engineer-in-

charge, made of a high density particle board substrate with a laminated facing as per the

approved shade & finish and a melamine balancing layer on the reverse side. The boards shall

have a special perforation pattern where the visible surface has a fluted perforation of 2 mm

width and 14 mm of visible panel / 4 mm width and 28 mm visible panel each. The panels shall

provide a minimum sag resistance of RH90 and a fire rating class 1. The edges of the panels

shall be “tongue-and-grooved” to receive special clips for installation. The back of the

perforated panel shall have sound absorbing non-woven acoustical fleece and packing with

glass wool fibre of density 24 kg/m3 to filling the gaps of partition frames for making

acoustic/sound absorbing. The panels shall be mounted on special aluminium splines using clips

provided by panelling vendor and approved shop drawings,as specified and to the complete

satisfaction of the Architect / Engineer-in-Charge.

Installation shall be over a base frame of Extruded aluminium sections of size 50 mm x 40 mm

x 2.0 mm thick as approved by the Architect/Engineer-incharge on the wall horizontally using

screws and plugs at spacing of 600 mm centre-to-centre. The aluminium extruded keel for

fixing of panelling shall be fixed over the base frame at a on-centre distance of 600 mm.

Installation shall be done by continuously mounting rows of panels by inserting the tongue into

the groove of the earlier inserted panel and progressively installing clips for inside channelled

works into the next keel till the actual height is achieved. Use clips for border channelled works

to finish off the installation. The final edges of the panelling shall be finish using wooden

moulding of min. 30 mm x 20 mm and polished in PU Finish to matching colour of acoustic

36 NSW-08 Providing and Fixing and Installation of Weightlifting Platform with all accessories including each 14 100,000.00 1,400,000.00

base pit,flooring and M.S Angle edging complete in all respect

(L) DISMANTLING AND DEMOLISHING

37 15.12 Dismantling doors, windows and clerestory windows (steel or wood) shutter including

chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

15.12.1 Of area 3 sq. metres and below each 30.00 274.50 8,235.00

38 15.13 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking

within 50 metres lead :

15.13.1 Of area 3 sq. metres and below each 28 106.55 2,983.40

39 15.23 Dismantling tile work in floors and roofs laid in cement mortar including stacking material

within 50 metres lead.

SL No. ITEM No. DESCRIPTION UNIT Qty RATE (in Rs.) AMOUNT (in RS.)

15.23.1 For thickness of tiles 10 mm to 25 mm sqm 160 54.85 8,776.00

40 15.26 Demolishing brick tile covering in terracing including stacking of serviceable material and sqm 20 79.6 1,592.00

disposal of unserviceable material within

50 metres lead.

CIVIL TOTAL 9,953,558.03

(K) PUBLIC HEALTH WORKS

41 17.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast

Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with

manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures

complete, including cutting and making good the walls and floors wherever required:

17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests Each 4 5,421.50 21,686.00

42 17.3 Providing and fixing white vitreous china pedestal type water closet (European type) with seat

and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings &

C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and

mosquito proof coupling of approved municipal design complete, including painting of fittings

and brackets, cutting and making good the walls and floors wherever required :

17.3.1 W.C. pan with ISI marked white solid plastic seat and lid each 6 6,685.00 40,110.00

43 17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. each 6 297.55 1,785.30

triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in -

44 17.19 Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings

17.19.1 10 litre (full flush) capacity-white each 4 1,839.70 7,358.80

45 NSW-09 Providing & fixing of white vitreous china counter top self rimming basin oval type (size 56X41 each 12 8,899.30 106,791.60

cm) with CP brass waste assembly, wall flanges and rubber adapters for waste connection

complete including CI/MS brackets duly painted, nuts, washers, cutting and making good the

walls floors wherever required as per direction of Engineer-Incharge. ( Hindware Cat no.

Semi Recessed Wash Basin Hindware Cat no. 10045

Pushmatic Pillar Cock (2Nos) Auto Closing Hindare cat no. F310001 (One Each for Fresh Water

SL No. ITEM No. DESCRIPTION UNIT Qty RATE (in Rs.) AMOUNT (in RS.)

46 17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P.

brass waste of standard pattern, including painting of fittings and brackets, cutting and making

good the walls wherever require:

17.7.4 White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass Each 2 2,510.45 5,020.90

47 17.32.4 Providing and fixing mirror of superior glass (of approved quality) and of required shape and Nos 4 1786.55 7,146.20

size with plastic moulded frame of approved make and shade with 6 mm thick hard board

backing :Rectangular shape 1500x450 mm

48 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) Nos 2 1283.05 2,566.10

complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and

washers complete.

49 17.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the each 14 883.05 12,362.70

direction of Engineer-in-charge.

50 17.5.1 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with each 6 9,360.60 56,163.60

white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe,

spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I.

trap with outlet grating and other couplings in C.P. brass, including painting of fittings and

cutting and making good the walls and floors wherever required :Single half stall urinal with 5

litre P.V.C. automatic flushing

51 NSW-10 Providing and fixing urinal partions of standard dimensions made of 12 mm thick toughened each 6 4,985.75 29,914.50

frosted Glass, scracth & impact resistant. The urnial partions shall be fixed on walls with right

angle brackets in stainless steel of grade 304 with necesary stainless steel screws of grade SS

304 complete as per the direction of Engineer incharge. (Jaquar Cat no.JSE-CHR-

810US450X or approved equivalent)

a) Urinal partition of size 1200 mm x 600 mm.

52 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) Each 2 1,283.05 2,566.10

complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and

washers complete.

53 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with each 8 228.20 1,825.60

minimum distances of 37 mm from wall face with concealed fittings arrangement of approved

quality and colour, weighing not less than 88 gms.

54 17.73 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP

brass screws with concealed fittings arrangement of approved quality and colour.

SL No. ITEM No. DESCRIPTION UNIT Qty RATE (in Rs.) AMOUNT (in RS.)

17.73.1 450 mm long towel rail with total length of 495 mm,78 mm wide and effective height of 88 each 12 555.35 6,664.20

mm, weighing not less than 170 gms

55 NSW-11 Providing and fixing in position SWR UPVC soil waste vent or antisyphonage pipes as per IS-

13592 (working pressure of 6kg /cm2) including cutting, jointing with approve solvent cement

compound as per IS-14735, wastage etc complete as per manufacturer's specifications and as

per direction of the Engineer In-charge. (Supreme or approved equivalent)

Double socket B Type

110mm dia SWR UPVC pipe lines laid complete Mtr 70 698.35 48,884.50

56 NSW Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes

as per IS-13592 and IS - 14735 including cutting and wastage etc. cutting holes in walls roofs

or floors etc. and making good to its original condition complete as per manufacturer's

specifications and as per direction of the Engineer In-charge. (Supreme or approved

For 110 mm dia pipes

A NSW-12 110mm dia Bend plain Nos 6 231.95 1,391.70

B NSW-13 110mm dia Heal Rest Bend Nos 1 297.45 297.45

C NSW-14 110 mm dia cowls Nos 1 96.50 96.50

D NSW-15 110 mm dia collars (coupless) Nos 2 148.40 296.80

57 NSW-16 Providing and fixing in position Square stainless steel Cockroach floor Traps square size Nos 29 758.70 22,002.30

127x127 mm with stainless steel floor drain grating, inner filter, outer filter, rim etc. complete

including cost of cutting and making good the walls floors at all heights, levels, including cost of

all material such as concrete/mortar etc. as per directions of the Engineer-in-charge. (

Viking,Chilly Cat no CCT-SFC-127 or Approved Equivalent make)

58 NSW-17 Providing and fixing in position stainless steel pipe clamps with EPDM rubber lining for wall

mounted vertical wall with making hole in wall for nuts and bolt etc complete in all respects as

per direction of the Engineer in charge (Make Fischer)

For 100 mm dia pipe Nos 3 232.20 696.60

59 18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :

18.49.1 15 mm nominal bore Nos 8 418.95 3,351.60

SL No. ITEM No. DESCRIPTION UNIT Qty RATE (in Rs.) AMOUNT (in RS.)

60 18.50 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS

standards and weighing not less than 810 gms.

61 NSW-18 Providing & fixing in position Angular stop cock with wall flange with necessary fixtures Nos 22 1,912.45 42,073.90

complete including cutting and making good the walls wherever required as per direction of

the Engineer in charge. (Jaquar Cat no.VGP-CHR-81053 or approved equivalent)

62 18.52 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make

conforming to IS:8931.

63 18.64 Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 Nos 10 111.75 1,117.50

64 18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height Nos 10 130.5 1,305.00

of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

65 18.22 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :

66 19.30 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with

bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty)

455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg

(weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement

: 1.5 Fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10

(1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12

mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating

coat of neat cement on walls and bed concrete etc. complete as per standard design:

19.30.3 Inside Dimension 600X850 mm and 45 cm deep for pipe line with three or more inlets:

19.30.3.1 With common burnt clay F.P.S (non modular) bricks of class designation 7.5 Nos 6 8,079.30 48,475.80

67 NSW-19 Providing and fixing square-mouth PVC gully trap of size 110 x 110 mm complete with brick Nos 6 3,963.70 23,782.20

masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the

weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per

standard design complete in all respect to complete Satisfaction of Engineer-in-charge:With Fly

ash lime bricks (FALG Bricks) conforming to I.S. 12894. Astral/ Supreme/Finolex or

equalent make size 110 x 110 mm Cat no.M142003409

SL No. ITEM No. DESCRIPTION UNIT Qty RATE (in Rs.) AMOUNT (in RS.)

68 17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings

17.28.2 Flexible pipe

69 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for

hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the

pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step

CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Internal work - Exposed on wall

69.1 18.7.3 25 mm nominal outer dia Pipes metre 40 369.20 14,768.00

69.2 18.7.4 32 mm nominal outer dia Pipes metre 20 480.55 9,611.00

70 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for

hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe

with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC

solvent cement and the cost of cutting chases and making good the same including testing of

joints complete as per direction of Engineer in Charge.

Concealed work, including cutting chases and making good the walls etc.

70.1 18.8.1 15 mm nominal outer dia Pipes metre 85 409.65 34,820.25

70.2 18.8.2 20 mm nominal outer dia Pipes metre 80 478.15 38,252.00

71 18.21 Providing and fixing uplasticised PVC connection pipe with brass unions :

18.21.2 45 cm length

18.21.2.1 15 mm nominal bore each 8 83.00 664.00

72 18.19 Providing and fixing gun metal non- return valve of approved quality (screwed end) :

72.1 18.19.1.2 25 mm nominal bore (Vertical) each 2 504.45 1,008.90

72.2 18.19.2.2 32 mm nominal bore (Vertical) each 4 708.65 2,834.60

73 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : per litre 5000 8.80 44,000.00

12701 marked, with cover and suitable locking arrangement and making necessary holes for

inlet, outlet and overflow pipes but without fittings and the base support for tank.

SL No. ITEM No. DESCRIPTION UNIT Qty RATE (in Rs.) AMOUNT (in RS.)

74 15.42 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the

material within 50 metres lead :

75 15.44 Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking

out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres

lead as per direction of Engineer-in-charge :

15.44.1 15 mm to 40 mm nominal bore metre 225 108.15 24,333.75

76 15.45 Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes,

manually/ by mechanical means breaking lead caulked joints, melting of lead and making into

blocks including stacking of pipes & lead at site within 50 metre lead as per direction of

Engineer-in-charge:

15.45.1 Up to 150 mm diameter metre 70 299.05 20,933.50

77 15.49 Taking out C.I. cover with frame from R.C.C. top slab of inspection chambers of various sizes each 6 292.25 1,753.50

including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful

materials near the site and disposal of unserviceable materials within 50 metres lead as per

direction of Engineer-in-charge.

78 15.52 Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful each 10 668.15 6,681.50

materials near the site and disposal of unserviceable materials within 50 metres lead.

(M) EXTERNAL SEWER

79 2.6 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas

(exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and

disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-

2.6.1 All kinds of soil. Cum 12 181.85 2,182.20

80 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of

centering and shuttering - All work up to plinth level :

4.1.10 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size) Cum 0.60 5,520.30 3,312.18

81 NSW-20 Providing, Laying, Jointing,cutting and testing PVC pipe and special SN - 8 pipe of approved

make for under ground Sewer system as per IS - 15328, complete in all respects as per the

direction of the Engineer in charge.

SL No. ITEM No. DESCRIPTION UNIT Qty RATE (in Rs.) AMOUNT (in RS.)

82 19.21 Making connection of drain or sewer line with existing manhole including breaking into and

making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4

graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement

mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making

necessary channels for the drain etc. complete :

19.21.1 For pipes 100 to 250 mm diameter Nos 1 623.50 623.50

PUBLIC HEALTH ENGINEERING TOTAL 759,674.73

III A) INTERNAL ELECTRICAL WORK

83 1.15 Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper

conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit

including dismantling as required.

84.0 1.14 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS

PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC

conduit as required.

CIRCUIT / SUBMAIN WIRING

a 1.14.1 2x1.5 sq mm + 1x1.5 sq mm earth wire Meter 300 146.00 43,800.00

b 1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire meter 249 200.00 49,800.00

c 1.14.2 2x2.5 sq mm + 1x2.5 sq mm earth wire Meter 200 167.00 33,400.00

d 1.14.4 2x6 sq mm + 1x6 sq mm earth wire. Meter 100 249.00 24,900.00

e 1.14.9 4x6 sq mm + 2x6 sq mm earth wire. Meter 100 394.00 39,400.00

85.0 1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in

surface/recess including cutting the wall and making good the same in case of recessed

conduit as required.

86.0 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate &

switch box including connections but excluding modular plate etc. as required.

c 1.24.4 3 pin 5/6 amp socket outlet Each 22 111.00 2,442.00

d 1.24.5 6 pin 15/16 amp socket outlet Each 18 175.00 3,150.00

SL No. ITEM No. DESCRIPTION UNIT Qty RATE (in Rs.) AMOUNT (in RS.)

87.0 1.26 Supplying and fixing modular blanking plate on the existing modular plate & switch box Each 50 32.00 1,600.00

excluding modular plate as required.

88.0 1.27 Supplying and fixing following size/ modules, GI box alongwith modular base & cover

plate for modular switches in recess etc as required.

89.0 2.4 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB

distribution board, 415 volts, on surface/recess, complete with tinned copper bus bar,

neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing

etc. as required. (But without MCB/RCCB/Isolator)

90.0 2.10 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C series Miniature

Circuit Breaker suitable for inductive loads of following poles in the existing MCB DB

complete with connections, testing and commissioning etc.,as required.

a 2.10.1 Single pole Each 8 199.00 1,592.00

b 2.10.2 Single pole and neutral Each 4 544.00 2,176.00

c 2.10.3 Double pole Each 2 556.00 1,112.00

91.0 2.11 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as Each 29 8.00 232.00

92.0 2.12 Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB

complete with connections, testing and commissioning etc. as required.

93.0 2.13 Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB

DB complete with connections, testing and commissioning etc. as required.

SL No. ITEM No. DESCRIPTION UNIT Qty RATE (in Rs.) AMOUNT (in RS.)

94.0 2.14 Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual

current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB

complete with connections, testing and commissioning etc. as required.

95.0 NSW-21 Supply of 2x2 recessed luminaire with CRCA housing and PMMA diffuser. Luminaire should have minimum Each 146 5,500.00 803,000.00

system efficacy of 100 lumens/W with minimum system lumen output of 3600 lumens. Luminaire wattage

should not exceed 36W. The luminaire should have a color temperature of 6500K and CRI>80. Luminaire

should have inbuilt PIR sensor with a coverage of 1.5m x 1.5 mt when mounted at 8 ft height. Driver of the

luminaire shall have THD < 10% and PF>0.90. Luminaire should have lifeclass of 50k burning hours at

L70B50 . The luminaire should be EMI/EMC compliance. (Similar to PHILIPS RC383B LED 36S-6500 PSU

OD WH PIR or equivalent as per approved list of make).

96.0 NSW-22 Supply and erection of Surface mounted circular LED Downighter, 15 watt, CAT No. SM251C Nos 120 1200 144,000.00

LED16S-6500 PSU WH of Philips Make & all petty materials required to complete the job in all

respects of Philips / Wipro / Bajaj make as approved by the Engineer in charge.

97.0 NSW-23 Supply of 312mm x 312mm Surface Mounted LED fixture with dimmable ballast with CRCA Each 40 1500 60,000.00

powder coated housing, high efficiency diffuser, PF≥0.95, THD<10% & surge proctection of ≥

2.5kv, lumen maintainence of 70% at the end of 50000 burning hours, having lumen output

not less than 3200 Lumens with luminaire efficacy of not less than 125 Lumens / watt with

CRI >80,operating range 150V – 270V, 50Hz AC supply, CCT 5700K -6500K. The luminaire is IP

20 protected. LM 79 report to be submitted for luminaire from NABL accrediated lab and LM 80

for LED source issued by LED manufacture. LED shall have reverse polarity, open and short

circuit protection. (Make:- Philips CAT No. SM200C LED16S 6500 PSU OD WH ,

Crompton/Wipro or equivalent)

TOTAL: INTERNAL ELECTRICAL WORK 1,366,976.00

NAME OF WORK:- DEVELOPMENT OF NETAJI SUBHAS NATIONAL INSTITUTE OF SPORTS, PATIALA.SH: RENOVATION AND UPGRADATION OF MILKHA SINGH

HOSTEL FOR MEN AND ALLIED WORKS AT NIS , PATIALA (Pb.).

BILL OF QUANTITIES

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (Rs.)

(A) CIVIL WORK

1 2.35 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite

treatment (excluding the cost of chemical emulsion) :

2.35.1 Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres /

sqm of the vertical surface of the substructure to a depth of 300 mm including excavation

channel along the wall & rodding etc. complete:

2.35.1.1 With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration Mtr 432.00 28.25 12,204.00

2 2.34 Supplying chemical emulsion in sealed containers including delivery as specified.

2.34.1 Chlorpyriphos/ Lindane emulsifiable concentrate of 20% Ltr 38.95 200.85 7,823.51

3 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of

centering and shuttering - All work up to plinth level :

4.1.6 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal Cum 75.95 6126.25 465,274.60

4 5.9 Centering and shuttering including strutting, propping etc. and removal of form for

5.9.4 Shelves (Cast in situ) Sqm 43 693.05 29,801.15

5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers Sqm 108.54 552.05 59,917.85

5 5.33 Providing and laying in position machine batched and machine mixed design mix M-25

grade cement concrete for reinforced cement concrete work, using cement content as per

approved design mix, including pumping of concrete to site of laying but excluding the

cost of centering, shuttering, finishing and reinforcement, including admixtures in

recommended proportions as per IS: 9103 to accelerate, retard setting of concrete,

improve workability without impairing strength and durability as per direction of Engineer-

(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement

used as per design mix is payable/recoverable separately).

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (Rs.)

5.33.2 All works above plinth level upto floor V level Cum 8.15 9400.85 76,632.93

6 5.35 Add for using extra cement in the items of design mix over and above Quintal 1 673.3 673.30

the specified cement content therein.

7 5.22A.6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in

position and binding all complete above plinth level.

Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 1222.8 83.5 102,100.07

8 9.21 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-

decorative type, core of block board construction with frame of 1st class hard wood and

well matched commercial 3 ply veneering with vertical grains or cross bands and face

veneers on both faces of shutters:

9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws Sqm 147 1886.70 277,344.90

9 9.127 Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss

/ matt/ suede finish with high density protective surface layer and reverse side of

adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of

approved quality.

10 9.96 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not

less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade,

with nuts and screws etc. complete :

11 9.97 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less

than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with

necessary screws etc. complete :

12 9.100 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less

than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with

necessary screws etc. complete :

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (Rs.)

13 9.101 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic

coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required

colour and shade, with necessary screws

9.101.2 Twin rubber stopper each 78.00 62.05 4,839.90

14.5 Renewing glass panes, with putty and nails wherever necessary including racking out the

14 14.5.2 Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) Sqm 25.00 1184.85 29,621.25

15 14.85 Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of each 45.00 297.85 13,403.25

repaired door shutters to existing door frames, including replacement of hinges with

screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

16 NSI-01 Removing and Fixing existing door frame after repairing wherever required and Fixing each 10 850.00 8,500.00

40x5 mm flat iron hold fast 40 cm long to frame with 10 mm diameter bolts, nuts and

wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement

: 3 coarse sand : 6 graded stone aggregate 20mm nominal size). and as required, all

complete as per the direction of the Engineer-in-charge.

17 10.2 Structural steel work riveted, bolted or welded in built up sections, trusses and framed kg 2194 101.75 223,239.50

work, including cutting, hoisting, fixing in position and applying a priming coat of

approved steel primer all complete

18 13.61.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even Sqm 129 121.55 15,679.95

shade : Two or more coats on new work

19 NSI-02 Providing and filling sunken portion of toilets using Autoclaved aeraed cement (AAC) Cum 68 3879.00 263,772.00

block bats complete in all respect.

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (Rs.)

20 NSI-03 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by

the manufacturer), with water absorption less than 0.08% and conforming to IS:15622,

of approved brand & manufacturer, in all colours and shade, laid on 20mm thick cement

mortar 1:4 (1 cement:4 coarse sand) jointing with grey cement slurry @3.3 kg/Sqm

including grouting the joints with white cement and matching pigments etc.The tile must

be cut with the zero chipping diamond cutter only.Laying of tiles will be done with the

notch trowel,plier,wedge,clips of required thickness,leaving system and ruber mallet for

placing the tiles gently and easily.

(Note:-The tiles should be in matt or mirror finish as required in design in the required

shade in first grade prime quality without any warping undulation, curving or bulging of

the top surface. The tiles shall be supplied and installed at site through an expert installer

including cost of all spacers and other accessories . All samples for tiles shall be approved

and before execution.)

Double charge vitrified tile polished finish of size

21 Providing and laying Vitrified tiles in Skirting & Dado in different sizes (thickness to be

specified by the manufacturer), with water absorption less than 0.08% and conforming to

IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20mm

thick cement mortar 1:4 (1 cement:4 coarse sand) jointing with grey cement slurry @3.3

kg/Sqm including grouting the joints with epoxy grout mix and matching pigments etc.The

tile must be cut with the zero chipping diamond cutter only.Laying of tiles will be done

with the notch trowel,plier,wedge,clips of required thickness,leaving system and ruber

mallet for placing the tiles gently and easily.

(Note:-The tiles should be in matt or mirror finish as required in design in the required

shade in first grade prime quality without any warping undulation, curving or bulging of

the top surface. The tiles shall be supplied and installed at site through an expert installer

including cost of all spacers and other accessories . All samples for tiles shall be approved

and before execution.)

Double charge vitrified tile polished finish of size

22 NSI-04 Size of Tile 800x800 mm (For Toilets) Sqm 1175 1538.25 1,807,680.64

23 NSI-05 Size of Tile 800x800 mm (For Corridor) Sqm 1398 1538.25 2,149,716.47

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (Rs.)

24 8.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and

prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and

similar locations of required size, approved shade, colour and texture laid over 20 mm

thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white

cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing,

moulding and polishing to edges to give high gloss finish etc. complete at all levels.

8.2.2.2 Granite of any colour and shade, Area of slab over 0.50 sqm Sqm 51 4007.65 203,969.35

25 13.91 Removing dry or oil bound distemper, water proofing cement paint and the like by Sqm 23743 18.25 433,309.75

scrapping, sand papering and preparing the surface smooth including necessary repairs to

scratches etc. complete.

26 13.83 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile

Organic Compound) content less than 50 grams/ litre of approved brand and

manufacture, including applying additional coats wherever required to achieve even shade

27 14.1 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and

under, including cutting the patch in proper shape, raking out joints and preparing and

plastering the surface of the walls complete, including disposal of rubbish to the dumping

ground, all complete as per direction of Engineer-in-Charge.

14.1.1 With cement mortar 1:4 (1 cement : 4 fine sand) Sqm 6924 417.80 2,892,847.20

28 13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved Sqm 16453.3 115.15 1,894,601.89

brand and manufacturer, over the plastered wall surface to prepare the surface even and

smooth complete.

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (Rs.)

29 21.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with

extruded built up standard tubular sections/ appropriate Z sections and other sections of

approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of

required dia and size, including necessary filling up the gaps at junctions, i.e. at top,

bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections

shall be smooth, rust free, straight, mitred and jointed mechanically wherever required

including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless

steel screws, all complete as per architectural drawings and the directions of Engineer-in-

charge. (Glazing, paneling and dash fasteners to be paid for separately) :

21.1.1 For fixed portion

29.1 21.1.1.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: kg 2021 423.95 856,802.95

1868, Minimum anodic coating of grade AC15)

30.0 21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions

etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings

and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid

in basic item):

21.3.2 With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm) Sqm 26.33 1296.4 34,127.73

31.0 21.8 Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by

providing weather silicon sealant over backer rod of approved quality as per architectural

drawings and direction of Engineer-in-charge complete.

21.8.1 Upto 5mm depth and 5 mm width metre 805 79.45 63,957.25

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (Rs.)

32 22.6 Providing and laying water proofing treatment on roofs of slabs by applying cement slurry sqm 298.00 523.05 155,868.90

mixed with water proofing cement compound consisting of applying:

(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with

water proofing cement compound @ 0.253 kg/sqm.

(b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of

joints of fibre cloth should not be lessthan 10 cm.

(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed

with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289

kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours.

The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in

parapet all around. (d) fourth and final

layer of brick tiling with cement mortar (which will be paid for separately). (For the

purpose of measurement the entire treated surface will be

33 14.90 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five

layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre

matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by

the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity

70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch

and sealing all joints etc., and preparing the surface complete. The vital physical and

chemical parameters of the membrane shall be as under : Joint strength in longitudinal

and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and

transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold

flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying

of membrane shall be got done through the authorised applicator of the manufacturer of

34 NSI-06 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes of approved

make conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS

: 14735, (working pressure of 6kg /cm2) leaving 10 mm gap for thermal expansion, (i)

Single socketed pipes.

35 NSI-07 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for

unplasticised Rigid PVC rain water pipes of approved make conforming to IS : 13592 Type

A (working pressure of 6kg /cm2), including jointing with seal ring conforming to IS :

14735, leaving 10 mm gap for thermal expansion.

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (Rs.)

36 12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete Each 25 244.05 6,101.25

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over

P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement :

3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing

the outlet complete.

37 NSI-08 Providing & Fixing of the Expansion Covers for Exterior Elastomeric & Metal Combination

Series ( WPK Series ) Wall to Wall & Wall Corner Flat Model WPK 100, for 100 mm

Expansion Joints. The system should have the exact visibility after installation. The design

of the system should be such that it allows for the installation of the system inside the

joint width for Flush Installation. The system should be able to receive two levels of

sealing provision by the way of Flexible high quality electrometric inserts seal for the

External Usage. The Elastomeric Seals should be long wearing, weather resistance and

should be able to withstand the exposed temperature of (- 30 to + 120 Degree C). The

Cover System due to its design parameters should be able applicable for usage in both

the Flat & Corner Situation. The system should be able to perform upto 100 mm Joint

size, having a total Movement of (+/- 50 mm) of Joint width.

Wall Joint of 50 mm gap Rmt 80.00 3500.00 280,000.00

38 NSI-09 Providing & Fixing of the Expansion Covers for Terrace Expansion Joints ( MP Series ),

Model – MP 420 for 100 mm Exp. Joints in Terrace to Terrace & Terrace to Terrace Wall.

The Sealing strip should be used for the application areas for the non-Pressurized water

areas as per DIN 18195 Specification. The MP Series Sealing Strip is specifically developed

compound with ensure to absorb the Three Dimensional movement having a Total Width

of 420 mm. The Sealing Strip should have the properties for sealing on the Bitumen

sheets, Epoxy Adhesive on Concrete & Metal. The both the side Ends should have the

Protruding Fabric which should enable for the Perfect bonding /connecting with Bitumen /

Epoxy. The MP Series Sealing Strip should have the fusion of EPDM in the elastic zone for

the excellent ozone & UV resistance. The sealing strip should at the same time perform

under varying thermal temperature of ( - 40 to + 90 Degree). The Sealing strip should

have a excellent resistance to alcohols and ketones, alkalis, diluted acids and Salt

Solution. The system should be able to perform upto 100 mm Joint size, having a total

Movement of 100 mm (+/- 50 mm) Longitudinal of Joint width and ( +/- 75 mm for the

vertical & Settlement of the Joint Width.

Wall Joint of 50 mm gap Rmt 11.04 2550.00 28,162.20

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (Rs.)

39 NSI-10 Providing and fixing polycarbonate sheet sheet should have protective guard film of 25 Sqm 122.08 1727.00 210,837.69

microns minimum to avoid scratches during transportation metre or as desired by

Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws with

EPDM seal, and the joints shall be provided with aluminium strips at top and bottom as a

seal complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost

of purlins, rafters and trusses and including cutting to size and shape wherever required.

Pollycarbonate sheet Multiwalled 12mm thick

40 13.46 Finishing walls with Acrylic Smooth exterior paint of required shade :

13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat Sqm 4461 164.70 734,726.70

of exterior primer applied @ 2.20 kg/ 10 sqm)

41 NSI-11 Providing and applying at all floors, heights and locations stone based texture finish Sqm 495.56 988.90 490,055.33

suitable for External & Internal use of approved make made from natural Granite stone

based materials and Bonding agent made from pure acrylic co-polymer emulsion, Broad

fungicide and Bonding agent mixed to a recommended quantity of water and applied with

a trowels on to the surface, to be finished, in an average uniform coat of minimum 2mm

covering an area of about 0.5 sqm/kg of the mix for uniform finish without anu

irregularties and discontinous on large surface area giving a uniform surface texture and

applied by a trained texture applicators in a single coat. The finish shall be anti fading and

non pigmented type with resistance to weathering. Any Grooves and Panels to be formas

a part of the design shall deemed to be inclusive in the cost. The texture shall be applied

shall be applied over a surface coat of cement primer after duly clearing off any unwanted

scratches and undulations by sand papering or using a wire brush before actual

application begin complete including cost of all material, labour, machinery, T&P, curing,

all leads, lifts and sampling, testing and water arrangements complete as per drawings,

requirements, specification and as directed by the Architect / Employer.

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (Rs.)

42 16.91 Providing and laying factory made chamfered edge Cement Concrete paver blocks in

footpath, parks, lawns, drive ways or light traffic parking etc, of required strength,

thickness & size/ shape, made by table vibratory method using PU mould, laid in required

colour & pattern over 50mm thick compacted bed of sand, compacting and proper

embedding/laying of inter locking paver blocks into the sand bedding layer through

vibratory compaction by using plate vibrator, filling the joints with sand and cutting of

paver blocks as per required size and pattern, finishing and sweeping extra sand.

complete all as per direction of Engineer-in- Charge.

16.91.2 80 mm thick C.C. paver block of M-30 grade with approved color design and Sqm 356 953 339,268.00

DISMANTLING AND DEMOLISHING

43 15.12 Dismantling doors, windows and clerestory windows (steel or wood) shutter including

chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

15.12.1 Of area 3 sq. metres and below each 78 274.5 21,411.00

44 15.13 Taking out doors, windows and clerestory window shutters (steel or wood) including

stacking within 50 metres lead :

15.13.1 Of area 3 sq. metres and below each 78 106.55 8,310.90

45 15.23 Dismantling tile work in floors and roofs laid in cement mortar including stacking material

within 50 metres lead.

15.23.1 For thickness of tiles 10 mm to 25 mm sqm 1090.92 54.85 59,837.00

46 15.26 Demolishing brick tile covering in terracing including stacking of serviceable material and sqm 20 79.6 1,592.00

disposal of unserviceable material within

50 metres lead.

CIVIL TOTAL 18,409,705.38

(B) PUBLIC HEALTH WORKS

47 17.3 Providing and fixing white vitreous china pedestal type water closet (European type) with

seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with

fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of

standard make and mosquito proof coupling of approved municipal design complete,

including painting of fittings and brackets, cutting and making good the walls and floors

wherever required

17.3.1 W.C. pan with ISI marked white solid plastic seat and lid each 78 6685 521,430.00

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (Rs.)

48 17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with each 78 297.55 23,208.90

S.S. triangular plate to Eureopean type W.C. of quality and make as approved by

Engineer - in - charge.

49 NSI-12 Providing & fixing of white vitreous china counter top self rimming basin oval type (size each 78 10860.60 847,126.80

56X41 cm) with CP brass waste assembly, wall flanges and rubber adapters for waste

connection complete including CI/MS brackets duly painted, nuts, washers, cutting and

making good the walls floors wherever required as per direction of Engineer-Incharge. (

Hindware Cat no. 10045)

Semi Recessed Wash Basin Hindware Cat no. 10045

Pushmatic Pillar Cock (2Nos) Auto Closing Hindare cat no. F310001 (One Each for Fresh

Water and Hot Water)

50 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved Nos 78 1283.05 100,077.90

quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P.

brass screws and washers complete.

51 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with each 78 228.2 17,799.60

minimum distances of 37 mm from wall face with concealed fittings arrangement of

approved quality and colour, weighing not less than 88 gms.

52 17.73 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP

brass screws with concealed fittings arrangement of approved quality and colour.

17.73.1 450 mm long towel rail with total length of 495 mm,78 mm wide and effective height of each 78 555.35 43,317.30

88 mm, weighing not less than 170 gms

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (Rs.)

53 NSI-13 Providing and fixing in position SWR UPVC soil waste vent or antisyphonage pipes as per

IS-13592 (working pressure of 6kg /cm2) including cutting, jointing with approve solvent

cement compound as per IS-14735, wastage etc complete as per manufacturer's

specifications and as per direction of the Engineer In-charge. (Supreme or approved

Double socket B Type

110mm dia SWR UPVC pipe lines laid complete Mtr 892 698.35 622,928.20

54 Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage

pipes as per IS-13592 and IS - 14735 including cutting and wastage etc. cutting holes in

walls roofs or floors etc. and making good to its original condition complete as per

manufacturer's specifications and as per direction of the Engineer In-charge. (Supreme

or approved equivalent)

For 110 mm dia pipes

54.1 NSI-14 110mm dia Bend plain Nos 78 231.95 18,092.10

54.2 NSI-15 110mm dia Heal Rest Bend Nos 52 297.45 15,467.40

54.3 NSI-16 110 mm dia Single Junction 110 mm x 110 mm x 110 mm Nos 156 354.35 55,278.60

54.6 NSI-18 110 mm dia collars (coupless) Nos 104 148.4 15,433.60

55 NSI-19 Providing and fixing in position Square stainless steel Cockroach floor Traps square size Nos 234 758.70 177,535.80

127x127 mm with stainless steel floor drain grating, inner filter, outer filter, rim etc.

complete including cost of cutting and making good the walls floors at all heights, levels,

including cost of all material such as concrete/mortar etc. as per directions of the

Engineer-in-charge. ( Viking,Chilly Cat no CCT-SFC-127 or Approved Equivalent

56 NSI-20 Providing and fixing 2" dia perforated PVC filter including Nylon jali wrapped all around Rmt 840 150 126,000.00

complete in all respects connected to the vertical stack of same size (To Drain out Water

from sunken portion)

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (Rs.)

57 NSI-21 Providing and fixing in position stainless steel pipe clamps with EPDM rubber lining for wall

mounted vertical wall with making hole in wall for nuts and bolt etc complete in all

respects as per direction of the Engineer in charge (Make Fischer)

For 110 mm dia pipe Nos 260 233.2 60,632.00

58 18.49 Providing and fixing C.P. brass bib cock of approved quality conforming

59 18.50 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS

standards and weighing not less than 810 gms.

60 NSI-22 Providing & fixing in position Angular stop cock with wall flange with necessary fixtures Nos 156 1912.45 298,342.20

complete including cutting and making good the walls wherever required as per direction

of the Engineer in charge. (Jaquar Cat no.VGP-CHR-81053 or approved equivalent)

61 18.52 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved

make conforming to IS:8931.

62 18.64 Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than Nos 78 111.75 8,716.50

63 18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, Nos 78 130.5 10,179.00

height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

64 18.22 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (Rs.)

65 19.30 Constructing brick masonry chamber for underground C.I. inspection chamber and bends

with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light

duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less

than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with

1:1.5:3 mix (1 cement : 1.5 Fine sand : 3 graded stone aggregate 20 mm nominal size),

foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm

nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse

sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc.

complete as per standard design:

19.30.3 Inside Dimension 600X850 mm and 45 cm deep for pipe line with three or more inlets:

19.30.3.1 With common burnt clay F.P.S (non modular) bricks of class designation 7.5 Nos 20 8,079.30 161,586.00

66 NSI-23 Providing and fixing square-mouth PVC gully trap of size 110 x 110 mm complete with Nos 20 3963.70 79,274.00

brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size

(inside) the weight of cover to be not less than 4.50 kg and frame to be not less than

2.70 kg as per standard design complete in all respect to complete Satisfaction of

Engineer-in-charge:With Fly ash lime bricks (FALG Bricks) conforming to I.S. 12894.

Astral/ Supreme/Finolex or equalent make size 110 x 110 mm Cat

67 17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste

fittings complete.

17.28.2 Flexible pipe

68 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability

for hot & cold water supply, including all CPVC plain & brass threaded fittings, including

fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings

with one step CPVC solvent cement and testing of joints complete as per direction of

Engineer in Charge.

Internal work - Exposed on wall

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (Rs.)

68.1 18.7.3 25 mm nominal outer dia Pipes metre 607 369.2 224,104.40

68.2 18.7.4 32 mm nominal outer dia Pipes metre 312 480.55 149,931.60

68.3 18.7.5 40 mm nominal outer dia Pipes metre 468 648.6 303,544.80

68.4 18.7.6 50 mm nominal outer dia Pipes metre 70 903.5 63,245.00

69 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability

for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing

the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one

step CPVC solvent cement and the cost of cutting chases and making good the same

including testing of joints complete as per direction of Engineer in Charge.

Concealed work, including cutting chases and making good the walls etc.

69.1 18.8.1 15 mm nominal outer dia Pipes metre 633 409.65 259,308.45

69.2 18.8.2 20 mm nominal outer dia Pipes metre 359 478.15 171,655.85

70 18.21 Providing and fixing uplasticised PVC connection pipe with brass unions :

18.21.2 45 cm length

18.21.2.1 15 mm nominal bore each 156 83 12,948.00

71 18.19 Providing and fixing gun metal non- return valve of approved quality (screwed end) :

72 15.42 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking

the material within 50 metres lead :

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (Rs.)

73 15.44 Dismantling G.I. pipes (external work) including excavation and refilling trenches after

taking out the pipes, manually/ by mechanical means including stacking of pipes within 50

metres lead as per direction of Engineer-in-charge :

15.44.1 15 mm to 40 mm nominal bore metre 1944 108.15 210,243.60

74 15.45 Dismantling C.I. pipes including excavation and refilling trenches after taking out the

pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and

making into blocks including stacking of pipes & lead at site within 50 metre lead as per

direction of Engineer-in-charge:

15.45.1 Up to 150 mm diameter metre 892 299.05 266,752.60

75 15.49 Taking out C.I. cover with frame from R.C.C. top slab of inspection chambers of various each 20 292.25 5,845.00

sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking

of useful materials near the site and disposal of unserviceable materials within 50 metres

lead as per direction of Engineer-in-charge.

76 15.52 Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of each 78 668.15 52,115.70

useful materials near the site and disposal of unserviceable materials within 50 metres

77 2.6 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over

areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including

getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as

directed by Engineer-in-charge.

2.6.1 All kinds of soil. Cum 72 181.85 13,093.20

78 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of

centering and shuttering - All work up to plinth level :

4.1.10 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal Cum 3.60 5520.30 19,873.08

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (Rs.)

79 NSI-24 Providing, Laying, Jointing,cutting and testing PVC pipe and special SN - 8 pipe of

approved make for under ground Sewer system as per IS - 15328, complete in all

respects as per the direction of the Engineer in charge.

80 19.21 Making connection of drain or sewer line with existing manhole including breaking into

and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse

sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides

with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat

cement and making necessary channels for the drain etc. complete :

19.21.1 For pipes 100 to 250 mm diameter Nos 20 623.50 12,470.00

81 NSI-25 Providing and fixing Mild Steel Shutter and frame for Cupboard made out of 18 gauge (1 Nos 156.00 18000.00 2,808,000.00

mm Thick) M.S Sheet including all accessories such as locking arrangement , Handle,Butt

hinges, screws,hold fasts,lugs,nuts and bolts,15 mm dia SS hanging rod,coat and hat

hook etc. including the cost powder coating of 60-70 micron complete in all respects as

per requirements, Drawings, specifications and as directed by the Engineer-in-

charge/Consultant. (Make-Godrej)

PUBLIC HEALTH ENGINEERING TOTAL = 8,300,944.53

SOLAR WATER HEATING SYSTEM

82 NSI-26 Supply, Installation,Testing and Commissioning of solar water heating system with copper

Absorber made of copper sheet 34 gauge/copper tube (at least 10 nos.)12.7 mm dia 0.56

mm thick riders and 2 nos header of copper tube dia 25 mm thickness,0.71 mm with flat

plate collector length 1860mm,width 1240 mm and height 100 mm.The collector box shall

be of aluminium extruded channel of size 100 mm X 25mm and 1.6 mm thick.All water

carriage system should with stand 4.5 kg cmsq pressure,complete duly insulated from

back and front with glazing with stainless steel storage tank (insulated),with temprature

gauge,strainer,water meter 2 nos. and HDPE/LDPE cold water tank duly erected on

existing MS angle/channel stand with suitable electric backup its control and wiring etc.

duly erected on roof top including all labour and material required to complete the job in

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (Rs.)

83 Supplying Installation of Insulation layer on CPVC Pipes of closed cell elastometric nitrile

rubber having thickness of minimum 32 mm/ 19 mm of minimum 45 Kg / m3 density,

thermal conductivity 0.037 W/MK or better at 20 deg C mean temperature class ‘O’

insulation applied by suitable adhesive complete including repairing of damage to building

etc. as per specifications and as required complete in all respect.

A NSI-27 15mm dia pipe Mtr 165 103.00 16,995.00

B NSI-28 20mm dia pipe Mtr 125 111.00 13,875.00

C NSI-29 25mm dia pipe Mtr 145 119.00 17,255.00

D NSI-30 50mm dia pipe Mtr 70 224.00 15,680.00

TOTAL FOR SOLAR WATER HEATING SYSTEM 855,805.00

III INTERNAL ELECTRICAL WORK

84 1.15 Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS

PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated

copper conductor single core cable as earth wire in existing surface/

recessed steel/PVC conduit including dismantling as required.

85.0 1.11 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper Point 6 1,057.00 6,342.00

conductor single core cable in surface / recessed medium class PVC conduit, 2

way modular switch, modular plate, suitable GI box and earthing the point with 1.5

sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

86.0 1.14 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of

FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium

class PVC conduit as required.

CIRCUIT / SUBMAIN WIRING

a 1.14.1 2x1.5 sq mm + 1x1.5 sq mm earth wire Meter 700 146.00 102,200.00

b 1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire meter 300 200.00 60,000.00

c 1.14.2 2x2.5 sq mm + 1x2.5 sq mm earth wire Meter 780 167.00 130,260.00

d 1.14.4 2x6 sq mm + 1x6 sq mm earth wire. Meter 250 249.00 62,250.00

e 1.14.9 4x6 sq mm + 2x6 sq mm earth wire. Meter 250 394.00 98,500.00

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (Rs.)

87.0 1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories

in surface/recess including cutting the wall and making good the same in case of recessed

conduit as required.

88.0 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate

& switch box including connections but excluding modular plate etc. as required.

c 1.24.4 3 pin 5/6 amp socket outlet Each 156 111.00 17,316.00

d 1.24.5 6 pin 15/16 amp socket outlet Each 78 175.00 13,650.00

89.0 1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing Each 156 342.00 53,352.00

modular plate switch box including connections but excluding modular plate etc. as

90.0 1.26 Supplying and fixing modular blanking plate on the existing modular plate & switch box Each 143 32.00 4,576.00

excluding modular plate as required.

91.0 1.27 Supplying and fixing following size/ modules, GI box alongwith modular base &

cover plate for modular switches in recess etc as required.

92.0 1.34 Supplying and fixing brass batten/ angle holder including connection etc. as required. Each 78 117.00 9,126.00

93.0 2.4 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel,

MCB distribution board, 415 volts, on surface/recess, complete with tinned copper bus

bar, neutral bus bar, earth bar, din bar, interconnections, powder painted

including earthing etc. as required. (But without MCB/RCCB/Isolator)

94.0 2.5 Supplying and fixing of following ways surface/ recess mounting, vertical type,

415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder

painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth

bar, din bar for mounting MCB's (but without MCB's and incomer ) as required .

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (Rs.)

95.0 2.10 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit

breaker suitable for inductive load of following poles in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

a 2.10.1 Single pole Each 8 199.00 1,592.00

b 2.10.2 Single pole and neutral Each 11 544.00 5,984.00

c 2.10.3 Double pole Each 5 556.00 2,780.00

d 2.10.4 Triple pole Each 1 826.00 826.00

e 2.10.5 Triple pole and neutral Each 1 1,092.00 1,092.00

96.0 2.11 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as Each 30 8.00 240.00

97.0 2.12 Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB

DB complete with connections, testing and commissioning etc. as required.

98.0 2.13 Supplying and fixing following rating, four pole, 415 volts, isolator in the existing

MCB DB complete with connections, testing and commissioning etc. as required.

99.0 2.14 Supplying and fixing following rating, double pole, (single phase and neutral), 240 V,

residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing

MCB DB complete with connections, testing and commissioning etc. as

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (Rs.)

100.0 NSI-31 Supply of 2x2 recessed luminaire with CRCA housing and PMMA diffuser. Luminaire should have Each 409 5,500.00 2,249,500.00

minimum system efficacy of 100 lumens/W with minimum system lumen output of 3600 lumens.

Luminaire wattage should not exceed 36W. The luminaire should have a color temperature of 6500K

and CRI>80. Luminaire should have inbuilt PIR sensor with a coverage of 1.5m x 1.5 mt when

mounted at 8 ft height. Driver of the luminaire shall have THD < 10% and PF>0.90. Luminaire should

have lifeclass of 50k burning hours at L70B50 . The luminaire should be EMI/EMC compliance.

(Similar to PHILIPS RC383B LED 36S-6500 PSU OD WH PIR or equivalent as per approved list of

101.0 NSI-32 SITC light fixtures like spot light 25 watt of 6" dia Each 156 1,250.00 195,000.00

102.0 NSI-33 Supply of 20W 4 ft batten with Exturded Aluminium/CRCA Housing, PMMA Non Yellowing Each 255 2,412.00 615,060.00

Diffuser. Luminaire should have minimum efficacy of 100 lumens/W.The luminaire should

have a color temperature of 5700K ,Input Frequency 50 HZ,Operating Voltage minimum

150-270V AC supply and CRI>80. Driver of the luminaire shall have THD < 20% ,

PF>0.95,IP-40 or higher and inbuilt surge protection minimum of 2kV. Luminaire should

atleast have lifeclass of 50000 burning hours . LM 79 report to be submitted for luminaire

from NABL accrediated lab and LM 80 for LED source issued by LED manufacture. LED

shall have reverse polarity, open and short circuit protection,under voltage and over

voltage protection. Type of driver and its DC output - Constant current Output driver and

less than 60V DC Output and Efficiency of driver > 85%.

103.0 NSI-34 Supply and erection of Surface mounted circular LED Downighter, 9 watt, CAT No. Each 260 800 208,000.00

CRDL11SO13HP57 of Wipro Make & all petty materials required to complete the job in all

respects of Philips / Wipro / Bajaj make as approved by the Engineer in charge.

104.0 NSI-35 Supply of 312mm x 312mm Surface Mounted LED fixture with dimmable ballast with each 107 1500 160,500.00

CRCA powder coated housing, high efficiency diffuser, PF≥0.95, THD<10% & surge

proctection of ≥ 2.5kv, lumen maintainence of 70% at the end of 50000 burning hours,

having lumen output not less than 3200 Lumens with luminaire efficacy of not less than

125 Lumens / watt with CRI >80,operating range 150V – 270V, 50Hz AC supply, CCT

5700K -6500K. The luminaire is IP 20 protected. LM 79 report to be submitted for

luminaire from NABL accrediated lab and LM 80 for LED source issued by LED

manufacture. LED shall have reverse polarity, open and short circuit protection. (Make:-

Philips CAT No. SM200C LED16S 6500 PSU OD WH , Crompton/Wipro or

105.0 NSI-36 Supply of ac 1200 mm sweep, 230/250 volts, 50 Hz ceilling fan without regulator, each 156 1700 265,200.00

standar down rod, blades etc. complete as required 3 star rating. (ISI Mark)

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (Rs.)

106.0 NSI-37 Supply of AC 300 mm sweep, 230/20 vplts 50Hz exhaust fan (heavy duty) with blade, each 100 2200 220,000.00

cover etc. complete as required.

TOTAL: INTERNAL ELECTRICAL WORK 5,193,832.00

Corridor Electrification Work

107.0 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate

& switch box including connections but excluding modular plate etc. as required.

108.0 1.27 Supplying and fixing following size/ modules, GI box alongwith modular base &

cover plate for modular switches in recess etc as required.

109.0 1.26 Supplying and fixing modular blanking plate on the existing modular plate & switch box Each 20 32.00 640.00

excluding modular plate as required.

110.0 1.14 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of

FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium

class PVC conduit as required.

CIRCUIT / SUBMAIN WIRING

a 1.14.1 2x1.5 sq mm + 1x1.5 sq mm earth wire Meter 105 146.00 15,330.00

1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire meter 110 200.00 22,000.00

Fixtures For Corridor

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (Rs.)

111.0 NSI-38 Supply of 312mm x 312mm Surface Mounted LED fixture with dimmable ballast with Nos 100 3399 339,900.00

CRCA powder coated housing, high efficiency diffuser, PF≥0.95, THD<10% & surge

proctection of ≥ 2.5kv, lumen maintainence of 70% at the end of 50000 burning hours,

having lumen output not less than 3200 Lumens with luminaire efficacy of not less than

125 Lumens / watt with CRI >80,operating range 150V – 270V, 50Hz AC supply, CCT

5700K -6500K. The luminaire is IP 20 protected. LM 79 report to be submitted for

luminaire from NABL accrediated lab and LM 80 for LED source issued by LED

manufacture. LED shall have reverse polarity, open and short circuit protection. (Make:-

Philips CAT No. SM200C LED16S 6500 PSU OD WH , Crompton/Wipro or

TOTAL: INTERNAL ELECTRICAL WORK 394,910.00

FIRE FIGHTING WORK

112.0 4 Supplying, installation, testing and commissioning of electric driven terrace pump suitable

for automatic operation and consisting of following, complete in all respects, as required:

(a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze

impeller with stainless steel shaft, mechanical confirming to IS : 1520

(b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3

phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot

mounted type with Class-'F' insulation, conforming to IS-325.

(c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as

(d) Suitable cement concrete foundation duly plastered and with anti vibration pads.

113 22 Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. Each 1.00 1508.00 1,508.00

114 NSI-39 Providing & fixing of pressure gauge in M.S. pipe line including connection etc. as required. Each 1.00 1508.00 1,508.00

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (Rs.)

115 NSI-40 Providing, installing and commissioning control panel of 3'x2'of 14 gauge M.S sheet metal Job 1.00 2500.00 2,500.00

painted and fitted with following accessories of approved make suitable for above referred

Terrace Pump set as approved make suitable for above referred Terrace pump as

approved by engineer in charge,switch ,starter main switch shunt coppler amperer meter

volt meter single phase provontor erath leaker three phase indicator complete with wiring

etc.size 24"x36" with MS sheet.

116 7 Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to

IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts,

gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and

painting with two or more coats of synthetic enamel paint of required shade complete as

117 17 Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office

red, conforming to IS 884 complete with the following as required. 20 mm nominal

internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585, 20

mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the

equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S.

Pipe and socket.

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (Rs.)

118 11 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with

bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets

conforming to IS 13095 of following sizes as required :

119 14 Providing, installation, testing and commissioning of non-return valve of following sizes

confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as

120.0 19 Supplying and fixing of fire brigade connection of cast iron body with gun metal male

instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS

pipe connection conforming to IS 904 as required :

121.0 NSI-41 Supply, installation, testing and commissioning ISI marked (IS:15683) Fire Extinguisher, Each 8 7181 57,448.00

Carbon-di-oxide type capacity 4.5 Kg. Flat base including valve, discharge hose of not less

than 10 mm dia, 1M long and complete in all respects including initial fill with CO2 gas

conforming to IS:307-1966 and wall suspension braket as required as per specifications

122 NSI-42 Supply, installation, testing and commissioning of 6kg ABC (Powder Type) Fire Each 8 3985 31,880.00

Extinguisher. Mild Steel Cylinders ISI marked fitted with pressure indicating gauge,

internal tube, squeeze lever type valve fully charged with ABC 90 powder (Mono

Ammonium Phosphate) pressured by Nitrogen complete in all respects including wall

suspension bracket and conforming to IS:15683 as required as per specifications.

123 NSI-43 Mechanical Foam type Fire Extinguisher. In HP Mild Steel Cylinders ISI marked / approved Each 2 17356 34,712.00

fitted with pressure indicating gauge, internal tube, squeeze lever type valve fully charged

complete in all respects including wall suspension bracket / trolley mounted and

confoming to IS:910 50 Litres (trolley mounted)

124 NSI-44 Supply, installation, testing and commissioning ISI marked (IS:15683) portable fire Each 8 3687 29,496.00

extinguisher, water (gas pressure) type capacity 9 kg with gun metal cap and nozzle and

complete in all respects including initial fill and wall suspension brackets as required as

per specifications.

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (Rs.)

125 NS-45 Supplying and fixing of double side EXIT sign board (size 12" x 6" x 4") fabricated in 18 Each 4 1990.55 7,962.20

swg CRC sheet with LED and acrylic sheet both side display, well ventilated, having

nominal size LED lamp, to be installed on wall / ceiling etc. complete as required.

126 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : per litre 10,000.00 8.80 88,000.00

12701 marked, with cover and suitable locking arrangement and making necessary holes

for inlet, outlet and overflow pipes but without fittings and the base support for tank.

FIRE FIGHTING WORKS TOTAL 409,738.20

NAME OF WORK:- DEVELOPMENT OF NETAJI SUBHAS NATIONAL INSTITUTE OF SPORTS, PATIALA.

SH: RENOVATION AND UPGRADATION OF P.T USHA HOSTEL FOR WOMEN AND ALLIED WORKS AT NIS , PATIALA (Pb.).

BILL OF QUANTITIES

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (RS.)

(A) CIVIL WORK

1 2.35 Diluting and injecting chemical emulsion for POST-

CONSTRUCTIONAL anti-termite treatment (excluding the cost

of chemical emulsion) :

2.35.1 Along external wall where the apron is not provided using

chemical emulsion @ 7.5 litres / sqm of the vertical surface of

the substructure to a depth of 300 mm including excavation

channel along the wall & rodding etc. complete:

2.35.1.1 With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration Mtr 450 28.25 12,712.50

2 2.34 Supplying chemical emulsion in sealed containers including

delivery as specified.

2.34.1 Chlorpyriphos/ Lindane emulsifiable concentrate of 20% Ltr 40.50 200.85 8,134.43

3 4.1 Providing and laying in position cement concrete of specified

grade excluding the cost of centering and shuttering - All work

up to plinth level :

i 4.1.6 1:3:6 (1 Cement : 3 coarse sand(zone-III) : 6 graded stone Cum 67.69 6126.25 414,690.95

aggregate 40 mm nominal size)

4 5.9 Centering and shuttering including strutting, propping etc. and

removal of form for

i 5.9.4 Shelves (Cast in situ) Sqm 162 693.05 112,274.10

ii 5.9.5 Lintels, beams, plinth beams, girders, bressumers and Sqm 144.57 552.05 79,809.21

5 5.33 Providing and laying in position machine batched and machine

mixed design mix M-25 grade cement concrete for reinforced

cement concrete work, using cement content as per approved

design mix, including pumping of concrete to site of laying but

excluding the cost of centering, shuttering, finishing and

reinforcement, including admixtures in recommended

proportions as per IS: 9103 to accelerate, retard setting of

concrete, improve workability without impairing strength and

durability as per direction of Engineer-in-charge.

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (RS.)

(Note :- Cement content considered in this item is @ 330

kg/cum. Excess/less cement used as per design mix is

payable/recoverable separately).

5.33.2 All works above plinth level upto floor V level Cum 20.80 9400.85 195,571.60

6 5.35 Add for using extra cement in the items of design mix over Quintal 1 673.3 673.30

the specified cement content therein.

7 5.22A.6 Steel reinforcement for R.C.C. work including straightening,

cutting, bending, placing in position and binding all complete

above plinth level.

Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 3120.5 83.5 260,565.19

8 9.21 Providing and fixing ISI marked flush door shutters

conforming to IS : 2202 (Part I) non-decorative type, core of

block board construction with frame of 1st class hard wood

and well matched commercial 3 ply veneering with vertical

grains or cross bands and face veneers on both faces of

9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges Sqm 171 1886.70 322,625.70

with necessary screws

9 9.127 Providing & Fixing decorative high pressure laminated sheet of

plain / wood grain in gloss / matt/ suede finish with high

density protective surface layer and reverse side of adhesive

bonding quality conforming to IS : 2046 Type S, including cost

of adhesive of approved quality.

10 9.84 Providing and fixing aluminium extruded section body tubular Nos 5 851.6 4,258.00

type universal hydraulic door closer of approved make (having

brand logo with ISI, IS : 3564, embossed on the body, door

weight upto 36 kg to 80 kg and door width from 701 mm to

1000 mm), with double speed adjustment with necessary

accessories and screws etc. complete.

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (RS.)

11 9.96 Providing and fixing aluminium sliding door bolts (L Drop), ISI

marked anodised (anodic coating not less than grade AC 10 as

per IS : 1868), transparent or dyed to required colour or

shade, with nuts and screws etc. complete :

12 9.97 Providing and fixing aluminium tower bolts, ISI marked,

anodised (anodic coating not less than grade AC 10 as per IS

: 1868 ) transparent or dyed to required colour or shade, with

necessary screws etc. complete :

13 9.100 Providing and fixing aluminium handles, ISI marked, anodised

(anodic coating not less than grade AC 10 as per IS : 1868)

transparent or dyed to required colour or shade, with

necessary screws etc. complete :

14 9.101 Providing and fixing aluminium hanging floor door stopper, ISI

marked, anodised (anodic coating not less than grade AC 10

as per IS : 1868) transparent or dyed to required colour and

shade, with necessary screws etc. complete.

9.101.2 Twin rubber stopper each 108.00 62.05 6,701.40

15 NSP-01 Providing and filling sunken portion of toilets using Cum 72 3879.00 279,288.00

Autoclaved aeraed cement (AAC) block bats complete in all

16 11.3 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 Sqm 50 498.35 24,917.50

graded stone aggregate) finished with a floating coat of neat

cement, including cement slurry, but excluding the cost of

nosing of steps etc. complete.

11.3.1 40 mm thick with 20 mm nominal size stone aggregate

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (RS.)

17 NSP-02 Providing and laying Vitrified tiles in floor in different sizes

(thickness to be specified by the manufacturer), with water

absorption less than 0.08% and conforming to IS:15622, of

approved brand & manufacturer, in all colours and shade, laid

on 20mm thick cement mortar 1:4 (1 cement:4 coarse sand)

jointing with grey cement slurry @3.3 kg/Sqm including

grouting the joints with white cement and matching pigments

etc.The tile must be cut with the zero chipping diamond cutter

only.Laying of tiles will be done with the notch

trowel,plier,wedge,clips of required thickness,leaving system

and ruber mallet for placing the tiles gently and easily.

(Note:-The tiles should be in matt or mirror finish as required

in design in the required shade in first grade prime quality

without any warping undulation, curving or bulging of the top

surface. The tiles shall be supplied and installed at site

through an expert installer including cost of all spacers and

other accessories . All samples for tiles shall be approved and

before execution.)

Double charge vitrified tile polished finish of size

Size of Tile 800x800 mm (For Toilets) Sqm 374 1431.30 535,306.20

18 NSP-03 Providing and laying Vitrified tiles in Skirting & Dado in

different sizes (thickness to be specified by the

manufacturer), with water absorption less than 0.08% and

conforming to IS:15622, of approved brand & manufacturer,

in all colours and shade, laid on 20mm thick cement mortar

1:4 (1 cement:4 coarse sand) jointing with grey cement slurry

@3.3 kg/Sqm including grouting the joints with epoxy grout

mix and matching pigments etc.The tile must be cut with the

zero chipping diamond cutter only.Laying of tiles will be done

with the notch trowel,plier,wedge,clips of required

thickness,leaving system and ruber mallet for placing the tiles

gently and easily.

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (RS.)

(Note:-The tiles should be in matt or mirror finish as required

in design in the required shade in first grade prime quality

without any warping undulation, curving or bulging of the top

surface. The tiles shall be supplied and installed at site

through an expert installer including cost of all spacers and

other accessories . All samples for tiles shall be approved and

before execution.)

Double charge vitrified tile polished finish of size

19 11.26 Kota stone slab flooring over 20 mm (average) thick base laid

over and jointed with grey cement slurry mixed with pigment

to match the shade of the slab, including rubbing and

polishing complete with base of cement mortar 1 : 4 (1

cement : 4 coarse sand) :

20 11.27 Kota stone slabs 20 mm thick in risers of steps, skirting, dado Sqm 60 1810.05 108,603.00

and pillars laid on 12 mm (average) thick cement mortar 1:3

(1 cement: 3 coarse sand) and jointed with grey cement

slurry mixed with pigment to match the shade of the slabs,

including rubbing and polishing complete.

21 13.91 Removing dry or oil bound distemper, water proofing cement Sqm 13203 18.25 240,954.75

paint and the like by scrapping, sand papering and preparing

the surface smooth including necessary repairs to scratches

22 8.2 Providing and fixing 18 mm thick gang saw cut, mirror

polished, premoulded and prepolished, machine cut for

kitchen platforms, vanity counters, window sills, facias and

similar locations of required size, approved shade, colour and

texture laid over 20 mm thick base cement mortar 1:4 (1

cement : 4 coarse sand), joints treated with white cement,

mixed with matching pigment, epoxy touch ups, including

rubbing, curing, moulding and polishing to edges to give high

gloss finish etc. complete at all levels.

8.2.2.2 Granite of any colour and shade, Area of slab over 0.50 sqm. Sqm 56 4007.65 224,428.40

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (RS.)

23 8.3 Providing edge moulding to 18 mm thick marble stone

counters, Vanities etc., including machine polishing to edge to

give high gloss finish etc. complete as per design approved by

Engineer-in-Charge.

8.3.2 Granite stone Mtr 114 376.25 42,892.50

24 13.83 Wall painting with premium acrylic emulsion paint of interior

grade, having VOC (Volatile Organic Compound) content less

than 50 grams/ litre of approved brand and manufacture,

including applying additional coats wherever required to

achieve even shade and colour.

25 NSP-04 Acid Washing of Existing Brick Cladding on External Façade of Sqm 3870.5 250 967,625.00

Building including all labour and equipments required for

washing complete in all respects.

26 14.1 Repairs to plaster of thickness 12 mm to 20 mm in patches of

area 2.5 sq.meters and under, including cutting the patch in

proper shape, raking out joints and preparing and plastering

the surface of the walls complete, including disposal of rubbish

to the dumping ground, all complete as per direction of

Engineer-in-Charge.

14.1.1 With cement mortar 1:4 (1 cement : 4 fine sand) Sqm 1319 417.80 551,245.32

27 14.85 Taking out existing wooden door shutter, repair by cutting, each 5 297.85 1,489.25

painting etc. and refixing of repaired door shutters to existing

door frames, including replacement of hinges with screws, etc.

as required, all complete as per the direction of the Engineer-

28 13.80 Providing and applying white cement based putty of average Sqm 9,680.00 115.15 1,114,652.00

thickness 1 mm, of approved brand and manufacturer, over

the plastered wall surface to prepare the surface even and

smooth complete.

29 6.1 Brick work with common burnt clay F.P.S. (non modular)

bricks of class designation 7.5 in foundation and plinth in:

6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 20 6157.45 123,149.00

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (RS.)

30 21.1 Providing and fixing aluminium work for doors, windows,

ventilators and partitions with extruded built up standard

tubular sections/ appropriate Z sections and other sections of

approved make conforming to IS: 733 and IS: 1285, fixing

with dash fasteners of required dia and size, including

necessary filling up the gaps at junctions, i.e. at top, bottom

and sides with required EPDM rubber/ neoprene gasket etc.

Aluminium sections shall be smooth, rust free, straight,

mitred and jointed mechanically wherever required including

cleat angle, Aluminium snap beading for glazing / paneling,

C.P. brass / stainless steel screws, all complete as per

architectural drawings and the directions of Engineer-in-

charge. (Glazing, paneling and dash fasteners to be paid for

21.1.1 For fixed portion

30.1 21.1.1.1 Anodised aluminium (anodised transparent or dyed to kg 3769 423.95 1,597,867.55

required shade according to IS: 1868, Minimum anodic

coating of grade AC 15)

31 21.8 Filling the gap in between aluminium frame & adjacent RCC/

Brick/ Stone work by providing weather silicon sealant over

backer rod of approved quality as per architectural drawings

and direction of Engineer-in-charge complete.

21.8.1 Upto 5mm depth and 5 mm width metre 260 79.45 20,657.00

32 21.3 Providing and fixing glazing in aluminium door, window,

ventilator shutters and partitions etc. with EPDM rubber /

neoprene gasket etc. complete as per the architectural

drawings and the directions of engineer-in-charge . (Cost of

aluminium snap beading shall be paid in basic item)

21.3.2 With float glass panes of 5 mm thickness (weight not less Sqm 381.11 1296.4 494,064.52

than 12.50 kg/ sqm)

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (RS.)

33 22.6 Providing and laying water proofing treatment on roofs of sqm 318 523.05 166,329.90

slabs by applying cement slurry mixed with water proofing

cement compound consisting of applying: (a) after surface

preparation, first layer of slurry of cement @ 0.488 kg/sqm

mixed with water proofing cement compound @ 0.253 kg/sqm.

(b) laying second layer of Fibre glass cloth when the first layer

is still green. Overlaps of joints of fibre cloth should not be

lessthan 10 cm.

(c) third layer of 1.5 mm thickness consisting of slurry of

cement @ 1.289 kg/sqm mixed with water proofing cement

compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm.

This will be allowed to air cure for 4 hours followed by water

curing for 48 hours. The entire treatment will be taken upto

30 cm on parapet wall and tucked into groove in parapet all

fourth and final layer of brick tiling with cement mortar (which

will be paid for separately. (For the purpose of measurement

the entire treated surface will be measured.)

34 14.90 Providing and laying APP (Atactic Polypropylene Polymer)

modified prefabricated five layer, 3 mm thick water proofing

membrane, black finished reinforced with glass fibre matt

consisting of a coat of bitumen primer for bitumen membrane

@ 0.40 litre/sqm by the same membrane manufactured of

density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160

cps. Over the primer coat the layer of membrane shall be laid

using butane torch and sealing all joints etc., and preparing

the surface complete. The vital physical and chemical

parameters of the membrane shall be as under : Joint

strength in longitudinal and transverse direction at 23°C as

350/300 N/5 cm. Tear strength in longitudinal and transverse

direction as 60/80N. Softening point of membrane not less

than 150°C. Cold flexibility shall be upto -2°C when tested in

accordance with ASTM, D - 5147. The laying of membrane

shall be got done through the authorised applicator of the

manufacturer of membrane :

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (RS.)

35 22.7 Providing and laying integral cement based water proofing

treatment including preparation of surface as required for

treatment of roofs, balconies, terraces etc consisting of

following operations: a) Applying a slurry coat of neat cement

using 2.75 kg/sqm of cement admixed with water proofing

compound conforming to IS. 2645 and approved by Engineer-

in-charge over the RCC slab including adjoining walls upto 300

mm height including cleaning the surface before treatment. b)

Laying brick bats with mortar using broken bricks/brick bats

25 mm to 115 mm size with 50% of cement mortar 1:5 (1

cement : 5 coarse sand) admixed with water proofing

compound conforming to IS : 2645 and approved by Engineer-

in-charge over 20 mm thick layer of cement mortar of mix 1:5

(1 cement :5 coarse sand ) admixed with water proofing

compound conforming to IS : 2645 and approved by Engineer-

in-charge to required slope and treating similarly the adjoining

walls upto 300 mm height including rounding of junctions of

walls and slabs.

c) After two days of proper curing applying a second coat of

cement slurry using 2.75 kg/ sqm of cement admixed with

water proofing compound conforming to IS : 2645 and

approved by Engineer-in-charge. d) Finishing the surface with

20 mm thick jointless cement mortar of mix 1:4 (1 cement :4

coarse sand) admixed with water proofing compound

conforming to IS : 2645 and approved by Engineer-in-charge

including laying glass fibre cloth of approved quality in top

layer of plaster and finally finishing the surface with trowel

with neat cement slurry and making pattern of 300x300 mm

square 3 mm deep. e) The whole terrace so finished shall be

flooded with water for a minimum period of two weeks for

curing and for final test. All above operations to be done in

order and as directed and specified by the Engineer-in-Charge

22.7.1 With average thickness of 120 mm and minimum thickness at Sqm 312.15 1398.50 436,541.78

khurra as 65 mm.

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (RS.)

36 NSP-05 Providing and fixing on wall face unplasticised Rigid PVC rain

water pipes of approved make conforming to IS : 13592 Type

B, including jointing with seal ring conforming to IS : 14735,

(working pressure of 6kg /cm2) leaving 10 mm gap for

thermal expansion, (i) Single socketed pipes.

37 NSP-06 Providing and fixing on wall face unplasticised - PVC moulded

fittings/ accessories for unplasticised Rigid PVC rain water

pipes of approved make conforming to IS : 13592 Type A

(working pressure of 6kg /cm2), including jointing with seal

ring conforming to IS : 14735, leaving 10 mm gap for thermal

38 NSP-07 Removing and Fixing existing door frame after repairing each 108 850.00 91,800.00

wherever required and Fixing 40x5 mm flat iron hold fast 40

cm long to frame with 10 mm diameter bolts, nuts and

wooden plugs and embedding in cement concrete block

30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded

stone aggregate 20mm nominal size). and as required, all

complete as per the direction of the Engineer-in-charge.

39 NSP-08 Providing and fixing Mild Steel Shutter and frame for Nos 108.00 18000.00 1,944,000.00

Cupboard made out of 18 gauge (1 mm Thick) M.S Sheet

including all accessories such as locking arrangement ,

Handle,Butt hinges, screws,hold fasts,lugs,nuts and bolts,15

mm dia SS hanging rod,coat and hat hook etc. including the

cost powder coating of 60-70 micron complete in all respects

as per requirements, Drawings, specifications and as directed

by the Engineer-in-charge/Consultant. (Make-Godrej)

40 NSP-09 FACTORY MADE MODULAR STORAGE Sqm 121.50 11000.00 1,336,500.00

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (RS.)

Supply and Installation of Factory Made Modular Storage ready to

assemble type, self-standing for Faculty Residences as per schematic

drawings. Vendor shall prepare a detailed shop drawing considering actual

site dimensions with provision for following items: (a) Carcass , shelves :

Made of 18 mm thick Marine plywood confirming to IS 710 with 0.8 mm

balancing laminate of selected shade on both sides pressed on hot-press

with approved adhesive. All the edges must be sealed with 0.8 mm

PVC/ABS edgebands, glued on PC controlled automatic Edgebanding

machine with pre-milling operation using hot-melt glue. For require

quality, plywood must be calibrated ply for uniformity and better bonding

with lamination and edgebands must be applied with pre-milling function

on. (b) Shutters: Made of 18 mm thick Marine plywood confirming to IS

710 with 1.0 mm thick high-pressure laminate sheet pressed on a hot-

press with approved adhesives, of plain / wood grain in gloss / matt /

suede finish with high density protective surface layer conforming to IS :

2046 .All the edges must be sealed with 0.8mm PVC/ABS edgebands,

glued on PC controlled automatic Edgebanding machine with pre-milling

operation using hot-melt glue. For require quality edgebands must be

applied with pre-milling function on. (c) Back Panel and drawers: Made of

12 mm thick Marine plywood confirming to IS 710 with 0.8 mm balancing

laminate of selected shade on both sides pressed on hot-press with

approved adhesive. Back side of cabinet in contact with wall plaster/ otta

Floor/ bottom of loft slab to be applied with wood primer. (d) Knock-down

Joining System (KD fittings): 8 mm x 45 mm concealed bolt with 15 mm

eccentric cranks, 8 mm jute dowels, 75 x 50 mm M.S. brackets, etc.

completed with drilling and fixing. Drilling and boring work is done on CNC

Multi-drill machine in KD-32 system. All mounting holes are notched in all

axes simultaneously in single reference. The maximum span between two

adjacent holes should not be more than 96 mm. All panels should be

interchangeable to facilitate assembly at site. Panels cannot be connected

by brackets or screws. (e) Hardwares: All the Hardware fittings of

DISMANTLING AND DEMOLISHING

41 15.3 Demolishing R.C.C. work manually/ by mechanical means cum 27 2534.70 68,436.90

including stacking of steel bars and disposal of unserviceable

material within 50 metres lead as per direction of Engineer -

42 15.7 Demolishing brick work manually/ by mechanical means

including stacking of serviceable material and disposal of

unserviceable material within 50 metres lead as per direction

of Engineer-in- charge.

15.7.4 In cement mortar cum 20 1469.9 29,398.00

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (RS.)

43 15.12 Dismantling doors, windows and clerestory windows (steel or

wood) shutter including chowkhats, architrave, holdfasts etc.

complete and stacking within 50 metres lead :

i 15.12.1 Of area 3 sq. metres and below each 108 274.5 29,646.00

44 15.13 Taking out doors, windows and clerestory window shutters

(steel or wood) including stacking within 50 metres lead :

i 15.13.1 Of area 3 sq. metres and below each 108 106.55 11,507.40

45 15.23 Dismantling tile work in floors and roofs laid in cement mortar

including stacking material within 50 metres lead.

15.23.1 For thickness of tiles 10 mm to 25 mm sqm 374 54.85 20,513.90

46 15.26 Demolishing brick tile covering in terracing including stacking sqm 15 79.6 1,194.00

of serviceable material and disposal of unserviceable material

50 metres lead.

CIVIL TOTAL 18,564,875.38

(B) PUBLIC HEALTH WORKS

47 17.3 Providing and fixing white vitreous china pedestal type water

closet (European type) with seat and lid, 10 litre low level

white vitreous china flushing cistern & C.P. flush bend with

fittings & C.I. brackets, 40 mm flush bend, overflow

arrangement with specials of standard make and mosquito

proof coupling of approved municipal design complete,

including painting of fittings and brackets, cutting and making

good the walls and floors wherever required

17.3.1 W.C. pan with ISI marked white solid plastic seat and lid each 54 6685 360,990.00

48 17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube each 54 297.55 16,067.70

upto 1 metre long with S.S. triangular plate to Eureopean

type W.C. of quality and make as approved by Engineer - in -

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (RS.)

49 NSP-10 Providing & fixing of white vitreous china counter top self

rimming basin oval type (size 56X41 cm) with CP brass waste

assembly, wall flanges and rubber adapters for waste

connection complete including CI/MS brackets duly painted,

nuts, washers, cutting and making good the walls floors

wherever required as per direction of Engineer-Incharge. (

Hindware Cat no. 10045)

Semi Recessed Wash Basin Hindware Cat no. 10045

Pushmatic Pillar Cock (2Nos) Auto Closing Hindare cat no. each 54 8899.3 480,562.20

F310001 (One Each for Fresh Water and Hot Water)

50 17.32.4 Providing and fixing mirror of superior glass (of approved Nos 54 1786.55 96,473.70

quality) and of required shape and size with plastic moulded

frame of approved make and shade with 6 mm thick hard

board backing :Rectangular shape 1500x450 mm

51 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 each 54 228.2 12,322.80

mm long, 200 mm wide with minimum distances of 37 mm

from wall face with concealed fittings arrangement of

approved quality and colour, weighing not less than 88 gms.

52 17.73 Providing and fixing PTMT towel rail complete with brackets

fixed to wooden cleats with CP brass screws with concealed

fittings arrangement of approved quality and colour.

17.73.1 450 mm long towel rail with total length of 495 mm,78 mm each 54 555.35 29,988.90

wide and effective height of 88 mm, weighing not less than

53 NSP-11 Providing and fixing in position SWR UPVC soil waste vent or

antisyphonage pipes as per IS-13592 (working pressure of

6kg /cm2) including cutting, jointing with approve solvent

cement compound as per IS-14735, wastage etc complete as

per manufacturer's specifications and as per direction of the

Engineer In-charge. (Supreme or approved equivalent)

Double socket B Type

110mm dia SWR UPVC pipe lines laid complete Mtr 648 698.35 452,530.80

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (RS.)

54 NSP Providing and fixing in position SWR UPVC special for soil

waste vent or anti syphonage pipes as per IS-13592 and IS -

14735 including cutting and wastage etc. cutting holes in walls

roofs or floors etc. and making good to its original condition

complete as per manufacturer's specifications and as per

direction of the Engineer In-charge. (Supreme or approved

For 110 mm dia pipes

54.1 NSP-12 110mm dia Bend plain Nos 54 231.95 12,525.30

54.2 NSP-13 110mm dia Heal Rest Bend Nos 36 297.45 10,708.20

54.3 NSP-14 110 mm dia Single Junction 110 mm x 110 mm x 110 mm Nos 72 354.35 25,513.20

54.5 NSP-16 110 mm dia collars (coupless) Nos 36 148.4 5,342.40

55 NSP-17 Providing and fixing in position Square stainless steel Nos 162 758.70 122,909.40

Cockroach floor Traps square size 127x127 mm with stainless

steel floor drain grating, inner filter, outer filter, rim etc.

complete including cost of cutting and making good the walls

floors at all heights, levels, including cost of all material such

as concrete/mortar etc. as per directions of the Engineer-in-

charge. ( Viking, Chilly Cat no CCT-SFC-127 or Approved

Equivalent make)

56 NSP-18 Providing and fixing 2" dia perforated PVC filter including Rmt 540 150 81,000.00

Nylon jali wrapped all around complete in all respects

connected to the vertical stack of same size (To Drain out

Water from sunken portion)

57 NSP-19 Providing and fixing in position stainless steel pipe clamps with

EPDM rubber lining for wall mounted vertical wall with making

hole in wall for nuts and bolt etc complete in all respects as

per direction of the Engineer in charge (Make Fischer)

For 110 mm dia pipe Nos 180 233.2 41,976.00

58 18.49 Providing and fixing C.P. brass bib cock of approved quality

conforming to IS:8931 :

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (RS.)

59 18.50 Providing and fixing C.P. brass long nose bib cock of approved Nos 108 618.80 66,830.40

quality conforming to IS standards and weighing not less than

18.50.1 15 mm nominal bore

60 NSP-20 Providing & fixing in position Angular stop cock with wall Nos 108 1912.45 206,544.60

flange with necessary fixtures complete including cutting and

making good the walls wherever required as per direction of

the Engineer in charge. (Jaquar Cat no.VGP-CHR-81053 or

approved equivalent)

61 18.52 Providing and fixing C.P. brass stop cock (concealed) of

standard design and of approved make conforming to IS:8931.

62 18.64 Providing and fixing PTMT swivelling shower, 15 mm nominal Nos 54 111.75 6,034.50

bore, weighing not less than 40 gms

63 18.65 Providing and fixing PTMT soap Dish Holder having length of Nos 54 130.5 7,047.00

138mm, breadth 102mm, height of 75mm with concealed

fitting arrangements, weighing not less than 106 gms.

64 18.22 Providing and fixing C.P. brass shower rose with 15 or 20 mm

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (RS.)

65 19.30 Constructing brick masonry chamber for underground C.I.

inspection chamber and bends with bricks in cement mortar

1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light

duty) 455x610 mm internal dimensions, total weight of cover

with frame to be not less than 38

kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C.

top slab with 1:1.5:3 mix (1 cement : 1.5 Fine sand : 3

graded stone aggregate 20 mm nominal size), foundation

concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone

aggregate 40 mm nominal size), inside plastering 12 mm thick

with cement mortar 1:3 (1 cement

: 3 coarse sand), finished smooth with a floating coat of neat

cement on walls and bed concrete etc. complete as per

standard design:

19.30.3 Inside Dimension 600X850 mm and 45 cm deep for pipe line

with three or more inlets:

19.30.3.1 With common burnt clay F.P.S (non modular) bricks of class Nos 18 8,079.30 145,427.40

designation 7.5

66 NSP-21 Providing and fixing square-mouth PVC gully trap of size 110 Nos 18 3963.70 71,346.60

x 110 mm complete with brick masonry chamber with water

tight C.I. cover with frame of 300x300 mm size (inside) the

weight of cover to be not less than 4.50 kg and frame to be

not less than 2.70 kg as per standard design complete in all

respect to complete Satisfaction of Engineer-in-charge:With

Fly ash lime bricks (FALG Bricks) conforming to I.S. 12894.

Astral/ Supreme/Finolex or equalent make size 110 x

110 mm Cat no.M142003409

67 17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin

including P.V.C. waste fittings complete.

17.28.2 Flexible pipe

68 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply,

including all CPVC plain & brass threaded fittings, including

fixing the pipe with clamps at 1.00 m spacing. This includes

jointing of pipes & fittings with one step CPVC solvent cement

and testing of joints complete as per direction of Engineer in

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (RS.)

Internal work - Exposed on wall

68.1 18.7.3 25 mm nominal outer dia Pipes metre 554 369.2 204,536.80

68.2 18.7.4 32 mm nominal outer dia Pipes metre 72 480.55 34,599.60

68.3 18.7.5 40 mm nominal outer dia Pipes metre 108 648.6 70,048.80

68.4 18.7.6 50 mm nominal outer dia Pipes metre 35 903.5 31,622.50

69 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply,

including all CPVC plain & brass threaded fittings, i/c fixing the

pipe with clamps at 1.00 m spacing. This includes jointing of

pipes & fittings with one step CPVC solvent cement and the

cost of cutting chases and making good the same including

testing of joints complete as per direction of Engineer in

Concealed work, including cutting chases and making good

69.1 18.8.1 15 mm nominal outer dia Pipes metre 554 409.65 226,946.10

69.2 18.8.2 20 mm nominal outer dia Pipes metre 355 478.15 169,743.25

70 18.21 Providing and fixing uplasticised PVC connection pipe with

18.21.2 45 cm length

18.21.2.1 15 mm nominal bore each 108 83 8,964.00

71 18.19 Providing and fixing gun metal non- return valve of approved

quality (screwed end) :

72 15.42 Dismantling C.I. or asbestos rain water pipe with fittings and

clamps including stacking the material within 50 metres lead :

73 15.44 Dismantling G.I. pipes (external work) including excavation

and refilling trenches after taking out the pipes, manually/ by

mechanical means including stacking of pipes within 50

metres lead as per direction of Engineer-in-charge :

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (RS.)

15.44.1 15 mm to 40 mm nominal bore metre 954 108.15 103,175.10

74 15.45 Dismantling C.I. pipes including excavation and refilling

trenches after taking out the pipes, manually/ by mechanical

means breaking lead caulked joints, melting of lead and

making into blocks including stacking of pipes & lead at site

within 50 metre lead as per direction of Engineer-in-charge:

15.45.1 Up to 150 mm diameter metre 648 299.05 193,784.40

75 15.49 Taking out C.I. cover with frame from R.C.C. top slab of each 9 292.25 2,630.25

inspection chambers of various sizes including demolishing of

R.C.C. work manually/ by mechanical means and stacking of

useful materials near the site and disposal of unserviceable

materials within 50 metres lead as per direction of Engineer-in-

76 15.52 Dismantling of flushing cistern of all types (C.I./PVC/Vitrious each 54 668.15 36,080.10

China) including stacking of useful materials near the site and

disposal of unserviceable materials within 50 metres lead.

77 2.6 Earth work in excavation by mechanical means (Hydraulic

excavator)/manual means over areas (exceeding 30 cm in

depth, 1.5 m in width as well as 10 sqm on plan) including

getting out and disposal of excavated earth lead upto 50 m

and lift upto 1.5 m, as directed by Engineer-in-charge.

2.6.1 All kinds of soil. Cum 27 181.85 4,909.95

78 4.1 Providing and laying in position cement concrete of specified

grade excluding the cost of centering and shuttering - All work

up to plinth level :

4.1.10 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone Cum 1.35 5520.30 7,452.41

aggregate 40 mm nominal size)

79 NSP-22 Providing, Laying, Jointing,cutting and testing PVC pipe and

special SN - 8 pipe of approved make for under ground Sewer

system as per IS - 15328, complete in all respects as per the

direction of the Engineer in charge.

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (RS.)

80 19.21 Making connection of drain or sewer line with existing

manhole including breaking into and making good the walls,

floors with cement concrete 1:2:4 mix (1 cement : 2 coarse

sand : 4 graded stone aggregate 20 mm nominal size) cement

plastered on both sides with cement mortar 1:3 (1 cement : 3

coarse sand), finished with a floating coat of neat cement and

making necessary channels for the drain etc. complete :

19.21.1 For pipes 100 to 250 mm diameter Nos 9 623.50 5,611.50

PUBLIC HEALTH ENGINEERING TOTAL 3,555,108.21

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (RS.)

SOLAR WATER HEATING SYSTEM

81 NSP-23 Supply, Installation,Testing and Commissioning of solar water

heating system with copper Absorber made of copper sheet

34 gauge/copper tube (at least 10 nos.)12.7 mm dia 0.56 mm

thick riders and 2 nos header of copper tube dia 25 mm

thickness,0.71 mm with flat plate collector length

1860mm,width 1240 mm and height 100 mm.The collector

box shall be of aluminium extruded channel of size 100 mm X

25mm and 1.6 mm thick.All water carriage system should

with stand 4.5 kg cmsq pressure,complete duly insulated from

back and front with glazing with stainless steel storage tank

(insulated),with temprature gauge,strainer,water meter 2 nos.

and HDPE/LDPE cold water tank duly erected on existing MS

angle/channel stand with suitable electric backup its control

and wiring etc. duly erected on roof top including all labour

and material required to complete the job in all respect.

82 NSP Supplying Installation of Insulation layer on CPVC Pipes of

closed cell elastometric nitrile rubber having thickness of

minimum 32 mm/ 19 mm of minimum 45 Kg / m3 density,

thermal conductivity 0.037 W/MK or better at 20 deg C mean

temperature class ‘O’ insulation applied by suitable adhesive

complete including repairing of damage to building etc. as per

specifications and as required complete in all respect.

A NSP-24 15mm dia pipe Mtr 230 103.00 23,690.00

B NSP-25 20mm dia pipe Mtr 85 111.00 9,435.00

C NSP-26 25mm dia pipe Mtr 95 119.00 11,305.00

D NSP-27 50mm dia pipe Mtr 35 224.00 7,840.00

SOLAR WATER HEATING SYSTEM TOTAL 419,670.00

III INTERNAL ELECTRICAL WORK (DSR ITEMS)

83.0 1.15 Rewiring for light point/ fan point/ exhaust fan point/ call bell

point with 1.5 sq.mm FRLS PVC insulated copper conductor

single core cable and 1.5 sq.mm FRLS PVC insulated copper

conductor single core cable as earth wire in existing surface/

recessed steel/PVC conduit including dismantling as required.

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (RS.)

84.0 1.14 Wiring for circuit/ submain wiring alongwith earth wire

with the following sizes of FRLS PVC insulated copper

conductor, single core cable in surface/ recessed medium

class PVC conduit as required.

CIRCUIT / SUBMAIN WIRING

a 1.14.1 2x1.5 sq mm + 1x1.5 sq mm earth wire Meter 532 146.00 77,672.00

b 1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire meter 262 200.00 52,400.00

c 1.14.2 2x2.5 sq mm + 1x2.5 sq mm earth wire Meter 632 167.00 105,544.00

d 1.14.4 2x6 sq mm + 1x6 sq mm earth wire. Meter 104 249.00 25,896.00

e 1.14.9 4x6 sq mm + 2x6 sq mm earth wire. Meter 104 394.00 40,976.00

85.0 1.21 Supplying and fixing of following sizes of medium class PVC

conduit along with accessories in surface/recess including

cutting the wall and making good the same in case of

recessed conduit as required.

86.0 1.24 Supplying and fixing following modular switch/ socket on

the existing modular plate & switch box including

connections but excluding modular plate etc. as required.

c 1.24.4 3 pin 5/6 amp socket outlet Each 108 111.00 11,988.00

d 1.24.5 6 pin 15/16 amp socket outlet Each 54 175.00 9,450.00

87.0 1.25 Supplying and fixing two module stepped type electronic fan Each 54 342.00 18,468.00

regulator on the existing modular plate switch box including

connections but excluding modular plate etc. as required.

88.0 1.26 Supplying and fixing modular blanking plate on the existing Each 117 32.00 3,744.00

modular plate & switch box excluding modular plate as

89.0 1.27 Supplying and fixing following size/ modules, GI box

alongwith modular base & cover plate for modular switches in

recess etc as required.

c 1.27.4 6 Module (200mmX75mm) - For Socket outlet. Each 50 333.00 16,650.00

d 1.27.5 8 Module (125mmX125mm) - For Socket outlet. Each 67 383.00 25,661.00

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (RS.)

90.0 1.34 Supplying and fixing brass batten/ angle holder including Each 54 117.00 6,318.00

connection etc. as required.

91.0 2.4 Supplying and fixing following way, horizontal type three pole

and neutral, sheet steel, MCB distribution board, 415 volts, on

surface/recess, complete with tinned copper bus bar,

neutral bus bar, earth bar, din bar, interconnections,

powder painted including earthing etc. as required. (But

without MCB/RCCB/Isolator)

92.0 2.10 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C"

curve, miniature circuit breaker suitable for inductive load of

following poles in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

a 2.10.1 Single pole Each 5 199.00 995.00

b 2.10.2 Single pole and neutral Each 7 544.00 3,808.00

c 2.10.3 Double pole Each 2 556.00 1,112.00

93.0 2.11 Supplying and fixing single pole blanking plate in the existing Each 20 8.00 160.00

MCB DB complete etc. as required.

94.0 2.12 Supplying and fixing following rating, double pole, 240 volts,

isolator in the existing MCB DB complete with connections,

testing and commissioning etc. as required.

95.0 2.13 Supplying and fixing following rating, four pole, 415

volts, isolator in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (RS.)

96.0 2.14 Supplying and fixing following rating, double pole, (single

phase and neutral), 240 V, residual current circuit breaker

(RCCB), having a sensitivity current 30 mA in the existing

MCB DB complete with connections, testing and

commissioning etc. as required.

97.0 NSP-28 Supply of 2x2 recessed luminaire with CRCA housing and PMMA Each 137 5,500.00 753,500.00

diffuser. Luminaire should have minimum system efficacy of 100

lumens/W with minimum system lumen output of 3600 lumens.

Luminaire wattage should not exceed 36W. The luminaire should have

a color temperature of 6500K and CRI>80. Luminaire should have

inbuilt PIR sensor with a coverage of 1.5m x 1.5 mt when mounted at 8

ft height. Driver of the luminaire shall have THD < 10% and PF>0.90.

Luminaire should have lifeclass of 50k burning hours at L70B50 . The

luminaire should be EMI/EMC compliance. (Similar to PHILIPS

RC383B LED 36S-6500 PSU OD WH PIR or equivalent as per

approved list of make).

98.0 NSP-29 Supply of light fixtures like spot light 25 watt of 6" dia of cat Each 108 1,645.00 177,660.00

no DN189B LED3S-6500 PSU WH MB Philips Make & all petty

materials required to complete the job in all respects of Wipro

/ Bajaj make as approved by the Engineer in charge.

99.0 NSP-30 Supply of 20W 4 ft batten with Exturded Aluminium/CRCA Each 108 2,412.00 260,496.00

Housing, PMMA Non Yellowing Diffuser. Luminaire should have

minimum efficacy of 100 lumens/W.The luminaire should have

a color temperature of 5700K ,Input Frequency 50

HZ,Operating Voltage minimum 150-270V AC supply and

CRI>80. Driver of the luminaire shall have THD < 20% ,

PF>0.95,IP-40 or higher and inbuilt surge protection minimum

of 2kV. Luminaire should atleast have lifeclass of 50000

burning hours . LM 79 report to be submitted for luminaire

from NABL accrediated lab and LM 80 for LED source issued

by LED manufacture. LED shall have reverse polarity, open

and short circuit protection,under voltage and over voltage

protection. Type of driver and its DC output - Constant

current Output driver and less than 60V DC Output and

Efficiency of driver > 85%.

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (RS.)

100.0 NSP-31 Supply and erection of Surface mounted circular LED Each 162 1,919.00 310,878.00

Downighter, 16 watt, CAT No. SM251C LED16S-6500 PSU WH

of Philips Make & all petty materials required to complete the

job in all respects of Philips / Wipro / Bajaj make as approved

by the Engineer in charge.

101.0 NSP-32 Supply of AC 300 mm sweep, 230/20 vplts 50Hz exhaust fan each 71 2200 156,200.00

(heavy duty) with blade, cover etc. complete as required.

102.0 NSP-33 Supply of ac 1200 mm sweep, 230/250 volts, 50 Hz ceilling each 54 1700 91,800.00

fan without regulator, standar down rod, blades etc.

complete as required 3 star rating. (ISI Mark)

TOTAL: INTERNAL ELECTRICAL WORK 2,460,141.00

Corridor Electrification Work

103.0 1.24 Supplying and fixing following modular switch/ socket on

the existing modular plate & switch box including

connections but excluding modular plate etc. as required.

104.0 1.27 Supplying and fixing following size/ modules, GI box

alongwith modular base & cover plate for modular switches in

recess etc as required.

c 1.27.4 6 Module (200mmX75mm) - For Socket outlet. Each 21 333.00 6,993.00

105.0 1.26 Supplying and fixing modular blanking plate on the existing Each 21 32.00 672.00

modular plate & switch box excluding modular plate as

106.0 1.14 Wiring for circuit/ submain wiring alongwith earth wire

with the following sizes of FRLS PVC insulated copper

conductor, single core cable in surface/ recessed medium

class PVC conduit as required.

CIRCUIT / SUBMAIN WIRING

a 1.14.1 2x1.5 sq mm + 1x1.5 sq mm earth wire Meter 100 146.00 14,600.00

b 1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire meter 125 200.00 25,000.00

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (RS.)

Fixtures For Corridor

107.0 NSP-34 Supply of 312mm x 312mm Surface Mounted LED fixture with Nos 238 1500 357,000.00

dimmable ballast with CRCA powder coated housing, high

efficiency diffuser, PF≥0.95, THD<10% & surge proctection of

≥ 2.5kv, lumen maintainence of 70% at the end of 50000

burning hours, having lumen output not less than 3200

Lumens with luminaire efficacy of not less than 125 Lumens /

watt with CRI >80,operating range 150V – 270V, 50Hz AC

supply, CCT 5700K -6500K. The luminaire is IP 20 protected.

LM 79 report to be submitted for luminaire from NABL

accrediated lab and LM 80 for LED source issued by LED

manufacture. LED shall have reverse polarity, open and short

circuit protection. (Make:- Philips CAT No. SM200C

LED16S 6500 PSU OD WH , Crompton/Wipro or

TOTAL: INTERNAL ELECTRICAL WORK CORRIDOR 416,200.00

FIRE FIGHTING WORK

108.0 4 Supplying, installation, testing and commissioning of electric

driven terrace pump suitable for automatic operation and

consisting of following, complete in all respects, as required:

(a) Horizontal type, multistage, centrifugal, split casing pump of

cast iron body & bronze impeller with stainless steel shaft,

mechanical confirming to IS : 1520

(b) Suitable HP squirell cage induction motor TEFC type suitable

for operation on 415 volts, 3 phase, 50 Hz, AC supply with

IP55 class of protection for enclosure, horiziontal foot

mounted type with Class-'F' insulation, conforming to IS-325.

(c) M.S.fabricated common base plate, coupling, coupling guard,

foundation bolts etc.as required.

(d) Suitable cement concrete foundation duly plastered and with

anti vibration pads.

109 22 Providing & fixing of pressure switch in M.S. pipe line including Each 2.00 1508.00 3,016.00

connection etc. as required.

110 NSP-35 Providing & fixing of pressure gauge in M.S. pipe line including Each 2.00 1508.00 3,016.00

connection etc. as required.

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (RS.)

111 NSP-36 Providing, installing and commissioning control panel of Job 1.00 2,500.00 2,500.00

3'x2'of 14 gauge M.S sheet metal painted and fitted with

following accessories of approved make suitable for above

referred Terrace Pump set as approved make suitable for

above referred Terrace pump as approved by engineer in

charge,switch ,starter main switch shunt coppler amperer

meter volt meter single phase provontor erath leaker three

phase indicator complete with wiring etc.size 24"x36" with MS

SUB HEAD - II - PIPING AND ACCESSORIES)

112 7 Providing, laying, testing & commissioning of 'C' class heavy

duty MS pipe conforming to IS 3589/IS 1239 including

Welding, fittings like elbows, tees, flanges, tapers, nuts bolts,

gaskets etc. and fixing the pipe on the wall/ceiling with

suitable clamp/support frame and painting with two or more

coats of synthetic enamel paint of required shade complete as

113 17 Supplying and fixing first-aid Hose Reel with MS construction

spray painted in post office red, conforming to IS 884

complete with the following as required.(a) 20 mm nominal

internal dia water hose thermoplastic (Textile reinforced) type

-2 as per IS: 12585 (b) 20 mm nominal internal dia gun metal

globe valve & nozzle. (c) Drum and brackets for fixing the

equipmets on wall. (d) Connections from riser with 25 mm dia

stop gun metal valve & M.S. Pipe and socket.

114 11 Supplying, fixing, testing and commissioning of butterfly valve

of PN 1.6 rating with bronze/gunmetal seat duly ISI marked

complete with nuts, bolts, washers, gaskets conforming to IS

13095 of following sizes as required :

115 14 Providing, installation, testing and commissioning of non-

return valve of following sizes confirming to IS: 5312

complete with rubber gasket, GI bolts, nuts, washers etc.as

SL ITEM NO. ITEMS UNIT Qty RATE AMOUNT (RS.)

116.0 19 Supplying and fixing of fire brigade connection of cast iron

body with gun metal male instantaneous inlet couplings

complete with cap and chain as reqd. for suitable dia MS pipe

connection conforming to IS 904 as required :

SUB HEAD - III - (FIRE EXTINGUISHERS)

117.0 NSP-37 Supply, installation, testing and commissioning ISI marked Each 9 7181 64,629.00

(IS:15683) Fire Extinguisher, Carbon-di-oxide type capacity

4.5 Kg. Flat base including valve, discharge hose of not less

than 10 mm dia, 1M long and complete in all respects

including initial fill with CO2 gas conforming to IS:307-1966