SPECIAL REPAIR TO FLOORING, BATHROOM, KITCHEN INCLUDING INTERNAL ELECTRIFICATION OF CERTAIN QUARTERS OF HARINIVAS UNDER GE(W) COLABA, MUMBAI

Amount

Dismantling of Plain or corrugated steel sheeting of any gauge/thickness or of similar pattern all as specified and directed.

S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws all as specified including scafoldings of any height all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.

S&F framed work such as grills, grating etc with ends of bars shouldered and/or riveted or forged in to spike, framed guard bars, barred iron door, ladder, framed balusters, railing, frame work of water tanks including MS plate, flat iron and similar works conforming to Fe 290 Gde-165 all as specified and directed.

M&L for preparation of new steel surfaces of any description not otherwise described over 10cm widht or girth and applying two coat of synthetic enamel paint all as specified and directed.

Demolition of cement concrete in ground floor & paving n. exc 15 cm thick (below or above GL) unreinforced all as specified and directed.

M&L PCC 1:4:8, type D2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete all as specified and directed.

M&L PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided water troughs and the like including weathering, slightly rounded or chamfered angles and throating all as specified and directed.

Demolition of brick work built in cement morter including all quoins arches pillars etc and precast articles includings disposal of demolished material all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM (1:6) all as specified and directed.

Taking down cement plaster on brick /stone walls/ ceiling including racking out joints, hacking for key scrubbing down with water to receive plaster, including complete and disposal of rubbish out side of the MD land including scaffolding arrangements all as specified and directed.

M&L for providing and applying average 12-15 mm thick plaster in ready mix prepacked proportioned dry mix mortar on internal surfaces including transporting of material, mixing, curing, scaffolding all as specified and directed. Name of Manufacturer: M/s ACC accopalst/M/s Premier Floor to Roof Materials pvt. ltd/ M/s Ultratech Cement Ltd/or other approved equivalent make.

M&L for applying average 25-30mm thick plaster in two coats with ready mix prepacked proportioned dry mix mortar, mixed with liquid water proofing compound on other than fair faces/fair faces of brick wall or concrete surfaces additives, on external surfaces including transporting of material, mixing, curing, scaffolding all as specified and directed. Note :- Liquid water proofing compound will be measured and paid seperately as supply only Name of Manufacturer: M/s ACC accopalst/M/s Premier Floor to Roof Materials pvt. ltd / M/s Ultratech Cement Ltd or other approved equivalent make.

Supply only integral water proofing compound.

M&L for preparing old/new plastered surfaces of walls /ceiling and applying two coats of oil bound distemper over a coat of alkali resistant primer including scaffolding all as specified and directed.

M&L for providing & applying anti algal water-based Elastomeric exterior wall finish on old/ newly plastered surface including surface preparation, applying suitable wall Primer and application of two coats of paint by brush etc Inclding scaffoling and all necessary arrangements all as specified and directed.( preferred make Dr Fixit Rain coat classic, Asianpaints ultima protek, Berger, Truworth, Apurva or equivalent)

M&L for applying 3mm thick wall care putty on wall all as specified and directed.

Dismantling of floor hearth/wall tiles including cement mortar bedding (but not backing) and removing serviceable tiles and debrice outside MD land all as specified and directed.

M&L for HD Polish Ceramic coloured tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles exc 0.18 sqm but not exc 0.38 sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the coloured tiles in floor including 15mm thick screed bed or bedding layer in CM 1:6 all as specified and directed.

M&L for HD Polish Coloured Ceramic coloured tiles 8-10 mm thick, area of each tiles not exc 0.38 sqm as in skirting and dados including 10 mm thick rendering coat in CM(1:4) set and jointed in neat cement slurry and pointed in coloured cement to match the shades of the tiles all as specified and directed.

M&L for Non skid coloured ceramic tiles 7 to 8 mm thick, area of each tiles exc 0.06 sqm but not exc 0.11 sqm as in floors including 15mm thick screed bed or bedding layer in CM(1:6) set and jointed in neat cement slurry and pointed in coloured cement to match the shades of the tiles all as specified and directed.

M&L Glazed digital ceramic tiles in vertical surface size 350x 250x 7 mm 450X 300X 7mm/600X300X7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade including 10mm thick rendering coat in CM 1:4 (Rate of Designer boarder in vertical surface will be deemed to be included in quoted rate) all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons all as specified and directed.

M&L Granite (of any type and size) average 20mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over 15mm thick screed bed in CM 1:4 on kitchen platform, Cill of Window/Ventilator/ flooring/border etc including moulding, rubbing, grinding and polishing all as specified and directed

M&L machine cut cudappah stone slab 20-25mm thick laid over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including15mm thick screed bed in CM 1:4 on kitchen platform, rubbing and polishing all as specified and directed.

Taking down chowkat with shutters (without taking off shutters from the frames ) area nexc 1.5 sqm each all as specified and directed.

Taking down chowkat with shutters (without taking off shutters from the frames) area exc 1.5 sqm but nexc 4 sqm all as specified and directed.

S&F Powder coated ( any shade approved by GE ) aluminium frame/shutter for door, window, ventilator, partitions of any type including sliding/hunge type all as directed with one or more rebates including fabrication of frame/shutters and fixing to wall with necessary lugs, cleat, etc. including all accessories such as glazing clips and rubber beading for fixing of glass panes, hinges locks all as specified and directed . (i) Glass panes/Wire cloth will be measured and paid seperately. (ii) The quoted rate rate shall be inclisive of cost of rubber beading, glazing clips and locking arrangement. (iii) Joint shall be completed using silicon gun is including in quoted rate. (iv) Rate quoted shall be deemed to be included for filling gap between wall & frame with silicon.

S&F sheet glass, ordinary quality, 5.5 mm thick and glazed with oil putty or fixed with rubber beading in square not exc 0.5 Sqm in each pane all as specified and directed.

S&F aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkhat comprising of 65 X 125 MM size applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length all as specified and directed. Make:- (a) M/S Rajshri Plastiwood, Indore (b) M/S Sintex Industries Ltd (c) M/S Accucell (d) M/S Dura Plast Extrusion

S&F factory made single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkhat comprising of 32X62 MM size and applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length all as specified and directed. Make:- (a) M/S Rajshri Plastiwood, Indore (b) M/S Sintex Industries Ltd (c) M/S Accucell (d) M/S Dura Plast Extrusion

S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 28-30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw with drawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges shall be paid separately)

S&F 30 mm thick factory made flush shutter, solid core construction, with block board core and plywood face panel, commercial type both side covered with decorative face veneers wiith 5 mm thick lipping with centraly locking arrangement with lock of make Godrej or link 7 lever and self closing device with magic eye all as specified and directed.

S&F 30 mm thick factory made wire mesh solid WPC door shutter consisting of density 600Kg/cum manufactured by an ISO 9001-2015 certified company . Door to be panelled with SS mosquito mesh and XTN mesh for aditional strenght and sefty purpose (conforming as per IS 4020) shutters all as specified and directed.

S&F 18-19 mm thick HDHMR board prelaminated one side with decorative choice lamination exterior grade, fixed with screw /hinges with frame work as in cupboard and kitchen cabinet shutters and all other similar works all as specified and directed. Make action tesla/grren ply/century ply or equivalent.

S&F SS barrel tower bolt 200 mm long of extruded section all as specified and directed.

S&F SS handles cast type, each 150mm long all as specified and directed.

S&F SS handles cast type, each 75 mm long all as specified and directed.

S&F SS butt hinges medium weight cold rolled 100 mm long all as specified and directed.

S&F SS butt hinges medium weight cold rolled 75 mm long all as specified and directed.

S&F magnet catcher for cupboard all as specified and directed.

S&F magnetic type Door buffer for door including all fixing arrangement all as specified and directed.

M&L preparing old wooden surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel painting all as specified and directed.

M&L preparing new wooden surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel painting over a coat of pink primer all as specified and directed.

Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets all as specified and directed.

M&L E-board tiles ceiling on GI powder coated channel/Tee/Grid of make (Armstrong or equivalent) frame work with the following specification including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type B0 / Cement mortar 1:3 all as specified and directed with following:- (a) Material and Labour for Plugging to wall around the rooms & supplying & fixing GI powder coated angle of make (Armstrong) of size 25 x 25 mm (b) Supply and fixing 1.60 mm dia GI wire suspenders with adjustable clamps including fixing to ceiling with dash free fasteners (c) Supply and fixing GI powder coated tee as in main & cross members at 595 mm centre to centre supported suspenders along with adjustable camp to maintain level. (d) Supply and fixing E-board ceiling tilesof size 595 mm x 595 mm x 4 mm thickness, confirming to relevant IS in squares of GI powder coated tee with clips made to shape, shade and pattern of tiles shall be as approved by GE

S&F in repairs 10 litres capacity, low level, syphonic type, white, plastic Twin flushing cistern conforming to model 'COMPASS' Cat No. B1020106 of CERA or of equivalent model in other makes as listed in Appendix 'C as per IS 7231: 1994 with inlet, ball valve, float and handle including brackets and 40 mm nominal dia high density polyethylene pipes for flush pipe all as specified and as directed.

S&F in repairs vitreous china wash down, white, water closet pan (pedestal pattern) with 'P' or 'S' trap Model 'CONVENTIONAL' cat part No. S1053102 of CERA or of equivalent model in makes specified in Appx 'C' with P or S trap, including plastic seat cover model 'CAJOL' cat Part No.B1510123 of CERA or of equivalent makes specified in Appx 'C' to match with colour of WC, closed pattern with flat bottom & cover and chromium plated mild steel or aluminium anodized hinging device including connecting to trap and flushing pipe, anti-syphonage pipe and screwed with brass screws to sheesham wood plugs embedded in floor all as specified and directed.

S&F in repairs corner type vitreous china wash basin (of 1st quality) including CI brackets, 32mm waste pipe, CP waste coupling, CP pillar tap all as specified and directed.

S&F in repairs 15 mm bore fancy type angular valve cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions all as specified and as directed by Engr-in-Charge. Make:- Cera Cat Part No F 1015201 or of equivalent model in other makes as listed in Appendix 'C.

S&F in repairs, two way angle valve cock chromium plated brass fancy type bore 15mm all as Specified and directed. Make : Cera/ Prayag/ Jaguar sample as approved by GE

S&F in repairs, stop cock, (Consealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union of size 15mm all as specified and directed. Make : Cera/ Prayag/ Jaguar sample as approved by GE

S&F in repairs 15mm bore dia bib taps cast copper alloy with crutch or butterfly handles, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed. Make : Cera/ Prayag/ Jaguar sample as approved by GE

S&F in repairs two way bib taps long body cast copper alloy chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore all as specified and directed. Make : Cera/ Prayag/ Jaguar sample as approved by GE

S&F in repairs pillar taps, cast copper alloy, with capstan heads, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore all as specified and directed. Make : Cera/ Prayag/ Jaguar sample as approved by GE : Cera/ Prayag/ Jaguar sample as approved by GE

S&F in repairs brass chromium plated tubular towel rail 20 mm dia, D type 60 cm long, between flanges including brackets fixed all as specified and approved. Make : Cera/ Prayag/ Jaguar sample as approved by GE

S&F in repair SS 20 mm dia decorative type curtain rods with fixing brackts and all other connected works all as specified and directed.

S&F SS Curtain rod side brackets of approved quality all as specified and directed.

S&F in repairs 15 mm bore fancy type wall mixer with 115 mm long bend pipe for connection to overhead shower (with bush and piston Divertor fittings) with aerator all as specified and as directed.

S&F PVC connection 15mm size with PTMT nuts of length 450 mm all as specified and directed.

M&L PVC waste pipe 32/40 mm for sink/WHB all as specified and directed.

S&F Grating round 140 mm size of PTMT (Minimum weight 50gms) all as specified and directed.

S&F in repairs PVC (SWR) 75mm bore pipes single socketed in any length with rubber ring joints fixed to wall/floor with GI /MS fixing arrangement min 75 mm from wall all as specified and directed.

S&F PVC (SWR) 75mm bore bends any radius all as specified and directed.

S&F in repairs for PVC nahani trap /floor trap with grating 75mm dia outlet jointed to waste pipe fixed in cement concrete (1:2:4) all as specified and directed.

Taking up or down steel tubing and connections 15 mm bore, including cleaning for refixing or removal all as specified and directed

Taking up or down steel tubing and connection including cleaning for refixing or removal to store for 20 mm bore all as specified and directed

S&F GI tubing medium grade 15mm bore laid to walls and ceiling or laid in floors all as specified and directed

S&F tubes medium grade galvanized with all fittings and fixed complete to walls and ceilings or laid in floor for 20 mm bore all as specified and directed.

S&F in repairs Shower arm 15 mm size, 195 mm long with bend of 45 degree with flange of PTMT any colour (Minimum weight 40gm) all as specified and directed.

S&F in repairs CP soap dish all as specified and as directed by Engr-in-Charge.

S&F in repairs sheet glass corner shelf assembly consisting of 5.5 mm thick sheet galss shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long fixed to walls all as specified and as directed .

S&F in repairs stainless steel plate racks of size 31" x 24" x 10" (or nearest size) conforming to cat part No. SSKPR-313 of Silver Shine or of equivalent model in other makes specified in Appendix 'C' complete all as specified & directed.

S&F in repairs sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement morter to dwarft wall or including fixing cantilever brackets and connecting union to pipe overall size 685mmx410 mm bowl size 355 mm x 305mm x 150mm or nearest size of make NIRALI brand name JUNIOR or equivalent model in other makes as listed in Appendix 'C. all as specified and as directed .

Cutting chases, pinning in and making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting n, exc. 10cm girth all as specified and directed.

S&F in repairs 15 mm bore fancy type health faucet with SS hose all as specified and as directed by Engr-in-Charge. Make:- Cera Cat Part No F 8030106AB or of equivalent model in other makes

S&F in repairs 300 litre capacity white loft polyethene water storage tank hoisted and fixed in position including tank nipple and 15 mm dia ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density ball including all fitting and necessary fixture all as specified and directed.

Taking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc. are to be measured separately) and/or drawing out from existing conduit/batten and making good disturbed surfaces of walls/floors/ceiling all as specified and directed.

M&L Point wiring (concealed type) with 1.5 sq mm, PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including rigid non-metallic PVC heavy duty conduit (ISI mark), 19/ 20 mm dia suitable size including cutting chases for conduits, sinking for concealed boxes and for concealed conduit wiring with all fittings and accessories including modular cover plates as required with and fix concealed 1.2 mm thick pressed steel modular sunken box, suitable for fixing moduler switch socket and unsheathed (FRLSH) single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly and making good to the disturbed surfaces to match the existing surfaces complete (fill up cement in gaps, finishing with putti and apply two coats of paint, match with existing colour in disturbed surface area), as per IS specification and as specified in SSR Part-I for one light point controlled by one modular switch, 1 way 6/10 amps, 1 module all as specified and directed. Make of Cable/ Wire : Anchor / Havells / Polycab

All as per serial item No.81 here-in before but for one bell point controlled by one switch.

All as per Srl item No. 81 here in before but for Exhaust fan point controlled by one switch. Make of Wire/ Cable : Havells/ Polycab/ Finolex.

All as per Srl item No.81 here in before but for Ceiling fan point controlled by one switch. Make of Wire/ Cable : Havells/ Polycab/ Finolex.

All as per Srl item No.81 here in before but for socket outlet point 5 Amp on same board. Make of Wire/ Cable : Havells/ Polycab/ Finolex.

All as per Srl item No.81 here in before but for socket outlet point 5 Amp on Independent board. Make of Wire/ Cable : Havells/ Polycab/ Finolex.

All as per srl item No 2 here-in-before but for one socket point 15 Amp with 2.5 sq mm PVC unseathed FRLSH wire along with 2.5 sq mm green colour wire as earth contuinity conductor connected to common earth dolly all as specified and directed. Make of Wire/ Cable : Havells/ Polycab/ Finolex.

All as per serial item No 81 above but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point for Geyser) all as specified and directed. Note: Earthing wire should also be of 4 Sqmm. Make of Wire/ Cable : Havells/ Polycab/ Finolex.

S&F Moduler Switch flush type single pole, one way 6/10 Amp all as specified & as directed Make - Legrand/indoasian/Havells

S&F Moduler Switch flush type single pole, one way 16 Amp all as specified & as directed Make - Legrand/indoasian/Havells

S&F Moduler socket 2/3 pin 6 Amp all as specified & as directed Make - Legrand/indoasian/Havells

S&F Moduler socket 6/16 A 2/3 pin all as specified & as directed. Make - Legrand/indoasian/Havells

S&F Moduler stepped type electronic fan regulator 450 watt flush type, two module all as specified & as directed. Make - Legrand/indoasian/Havells

S&F Moduler bell push, 2 modue, 10 Amp all as specified & as directed Make - Legrand/indoasian/Havells

S&F calling bell ding dong type 230 volts all as specified and directed Make - Legrand/indoasian/Havells

S&F ceiling rose surface bakelite 65x50mm, 3 terminal all as specified and directed. Make : Cona , Plaza, Anchor .

S&F in repair Modular type AC Box, 4 Module with Socket and 20 Amp SP mini MCB in plastic box enclosure along with cover plate and top all as specified and directed. Make - Legrand/indoasian/Havells

M&L refixing of ceiling fan (old fan) and connecting up including provision of cable from ceiling rose or connector and fan Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. with taking down fan, sealing cable end, dismantling romoving and hanging fan with rod of required length and proper hook and blades and removing fan and blades to store all as specified and directed. Note: Connection should be made neatly using two core white flexible cable.

S&F in repairs 20 watt LED, 6500 K, 4 feet long fixed on pvc square for mounting the fittings and electrically connecting with three single core 23/0.0076. PVC insulated multi strandard copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) and one for earthing all as specified and directed. Make:- Wipro, Model No : Wipro Garnet 10W LED Batten 6500K or equivant make of Philips/Havells Note: Connection should be made neatly using two core white flexible cable.

S&F LED lights fitting 1x 10W, 220 mirror type with high out put diffuser 2 feet, 10 watt 220 V, AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size completeV, AC decorative box type, bright white / white type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete pre wired fixed to wall with 2 nos PVC block of suitable size all spcifided and directed. Make : Wipro Garnet 20 W LED Batten 6500K or equivant make of Philips/ Havells. Note: Connection should be made neatly using two core white flexible cable.

S&F Exhaust fan 230 volt, 300 mm heavy duty metal body with louvre and wooden frame including making all electric connection all as specified and directed including cutting of hole on wall and makng good to disturbed surface of wall and outer wooden box for fan fix on wall including taking down old exhaust fan and deposit to old MES store safely without any damage all as specified and directed. Make Bajaj/ Havells/ Crompton Greaves Note: Connection should be made neatly using two core white flexible cable.

Taking down, repair, spray paint and refixing Exhaust fan 230 volt, 300 mm metal body with louvre and wooden frame including making all electric connection complete all as specified and as directed including cutting of hole on wall and makng good to disturbed surface of wall and outer wooden box for fan fix on wall all as specified and directed. Note : Connection should be made using two core white flexible cable.

Taking Down, Repair & Refixing electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated with all accessories such as safety valve, thermostate, NRV, connection piece all as specified and directed. Note: connection including new heavy duty iron hooks.

S&F LED security Building light LED 45 Watt, pressure die cast aluminum housing, heat resistant glass, IP65/66 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light all as specified and directed. Make:- Bajaj Cat part No- 169821 LED/CG as perr vat No LSTO 25 CDL equivalent model as in Surya / havells . NOTE : Rate quoted should be inclusive of connecting building security light to switch with 2.5mm 3 core flexible cable of make : Polycab/Havells/Finolex.

S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings and including 20 watt white LED bulb all as specified and directed. Make of Holder: Anchor, philips/ Cona. Make of LED Bulb: Philips/Havells/Bajaj.

Taking Down & Refixing MCB Distribution board, 240 volts single pole and neutral, double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 4 ways, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking down all as specified and directed. Make: Havells Cat part No DHDPSHODRW8 or equivalent in Schnieder/GE/C&S.

S&F MCB DP, 240 Volts, 20-40 Amps, 10 kA rupturing capacity 'C' series all as specified and directed including taking down old one all as specified and directed.

S&F in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's including taking down old one all as specified and directed.

N F ENTERPRISES

HINDUSTAN BUILDERS

Unity Enterprises

Vandan Enterprises

Anil Industrial Corporation

SAHU AND SAHU CO.

SHIV ENTERPRISE

SHREE JAGDISH FURNITURE CO.

Bidder Name

HINDUSTAN BUILDERS

Unity Enterprises

SAHU AND SAHU CO.

Anil Industrial Corporation

Vandan Enterprises

Ganesh Enterprises

SHREE JAGDISH FURNITURE CO.

SHIV ENTERPRISE

N F ENTERPRISES