PROVN OF TOILET BLOCK AT CHOWKIBAL UNDER THE AOR OF GE 874 EWS.

Amount

Surface excavation n. exc 30 cm deep and average 15cm deep and getting out soft/ loose soil complete all as specified and directed.

Excavation in trenches n. exc 1.5m wide and n. exc 1.5m in depth for foundation etc in soft/loose soil complete all as specified and directed.

M&L for plain cement concrete as in foundation, filling & mass concrete 1:4:8 type D-2 (using 40 mm graded aggregate complete all as specified and directed.

M&L brick work with sub class 'B' brick straight or curved on plan etc 6 mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

M&L for stone walling of random rubble masonry, well bonded, bedded and solidly hearted, built in CM (1:4) complete all as specified and directed.

Returning and filling including spreading levelling watering and well ramming in layers n. exc 25 cm in soft/loose soil complete all as specified and directed.

Removal of excavated materials not exc 50cm and depositing where directed at a level n. exc 1.5m above the starting point complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required including cranking, bending, spirally for hooking for column, hooking ends and binding with MS wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to FS-410 complete all as specified and directed.

M&L for mild steel TMT bars 6 to 8mm dia and over cut to length, bent to shape required including cranking, bending, spirally for hooking for column, hooking ends and binding with MS wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to FS-410 complete all as specified and directed.

M&L for RCC M-25 Design mix using 20 m graded aggregate for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for RCC M-25 Design Mix using 20 mm graded stone aggregate for Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for RCC M-25 design mix using 20 mm graded stone aggregate for beams, cantilevers & lintel beams etc complete all as specified and directed.

M & L for providing reinforced cement concrete Type B1 1:2:4 (20 mm graded aggregate) aggregate) slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for flat rough finished surfaces of concrete complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions for Square, Circular rectangular on plan or polygona flat rough finished surfaces of concrete complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:4) as in external surfaces plastering to fair faces of bricks masonry wall surfaces and finished even & smooth with mixing integral water proofing compound as per manufacturers insructions complete all as specified and directed. Note:- Water proofing compound shall be measurd and paid seperately.

M&L for 15mm thick CM (1:6) as in internal plastering to others than fair face of brick masonry walls and finished even & smooth complete all as specified and directed.

M & L for mild steel work as in roof trussed (framed) purlins crane gantries rail & fastening and heavy bracket (beam tea angle channel or flat section) including distance pieces cleats etc complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint over a priming coat with red oxide primer over new steel surface over 10 cm width or girth complete all as specified and directed.

M & L for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed.

M & L for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed.

M & L two coats of cement based paint on external wall surfaces over a coat of primer including preparation newly plastered surface complete all as specified and directed.

M&L for preparing the new plastered surfaces of walls up to any height and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L Moorum/red bajri filling in floors or paving, laid in layers n exc. 15 cm thick, spread, leveled and rammed including watering complete all as specified and directed.

M&L hard core filling under floor, breaking stone or boulder n exc 63mm gauge of sand stone complete all as specified and directed.

M&L for 100mm thick PCC (1:3:6), type D-2 using 40 mm graded crushed stone aggregate as in sub base of floor complete all as specified and directed.

M&L for coloured glazed ceramic tiles of size 350x 250x7mm/450x350x7mm as in vertical surfaces such as skirting, dados etc jointed in neat cement slurry and pointed in white or coloured cement to match, set and jointed in neat cement slurry and over and including 15mm thick backing coat in CM (1:4) laid complete all as specified and directed.

M&L Non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm and n.exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:4) laid over and including 25mm thick PCC (1:2;4) type B1 using 20 mm graded crushed stone aggregate, complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plaint colour PVC sheet reinforced with MS square tube, and fitted in opening complete all as specified and directed.

S&F factory made solid PVC moulded door shutter with particle board core 28 to 30mm thick (style) with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing complete all as specified and directed.

S&F for 2nd class soft wood, plain, solid, straight chowkats or frames, wrought framed rebated on the solid, rounded or chamfered, put together with flue pinned at joints complete all as specified and directed.

M & L plain framed panelled shutter 2nd class soft wood 35mm thick (any number of panel) with panel of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkhats 35mm thick second class soft wood (Kail) complete all as specified and directed.

S&F Galvanized mild steel wire cloth having 0.56mm dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete with glazing bars, dove tailed or welded including one shop coat of zinc chrome primer complete all as specified and directed.

S&F Sheet glass ordinary quality 3mm thick, glazing with oil putty or wooden beads in squares not exceeding 0.50Sqm in each pane, in repairs, complete all as specified and as directed.

M & L for mild steel butt hinge medium weight cold rolled 100mm size complete all as specified and directed.

M & L for mild steel butt hinge medium weight cold rolled 75mm size complete all as specified and directed.

S&F Mild steel pressed handle, oval type stove enamelled, black size of handle 150mm size complete all as specified and directed.

S&F Mild steel pressed handle, oval type stove enamelled, black of size 100mm complete all as specified and directed.

M & L for Mild steel tower bolt stove enamelled black 150mm long black with bright bolt and fixed complete all as specified and directed.

M & L for Mild steel tower bolt stove enamelled black 100mm long black with bright bolt and fixed complete all as specified and directed.

M & L for MS flat iron as in hold fast complete all as specified and directed.

M&L 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection surfaces finished even and fair, complete all as specified and as directed.

M & L for mild steel sliding door bolts stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate 200mm long complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over one coat of pink primer by preparing of new wooden surfaces of any description, not otherwise described over 10cm width or girth complete all as specified and directed.

S&F tubing galvanized iron medium grade with all fitting laid in concealed, trenches, floors or fixed to walls or ceiling, in any length, bore of pipe 15mm complete all as specified and directed.

All as per Srl. item No. 50 here-in-before but bore of pipe 20mm.

S&F Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed with 20mm dia complete all as specified and directed.

M & L for Vitreous China wash basin with padestal, vertically mounted fancy bowl flat back size 550 x 400 m including waste pipe and coupling 32mm for basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed including MS brackets& waste Pipe complete all as specified and directed.

M&L for Vitreous China squatting Pan "Orrisa Pattern" size 580 x 440mm white with integral foot rests including flush pipe of PVC 32mm dia for low level cistern fixed in repair complete all as specified

S&F vitreous China bowl urinal flat back, size of 465x355x265mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)

S&F in repair PVC valve-less symphonic action type flushing cistern, low level white with inlet ball valve float and handle including brackets (10 Ltr) capacity complete all as specified and directed.

M & L for soap dish, vitreous China white, approximate size 160x 160x90mm complete all as specified and directed.

S&F PVC connection 15mm dia and 600mm long with PTMT nuts and washer complete all as specified.

Stop valve 15mm bore, cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions

M & L for CP Pillar taps, with capstan head chromium plated 15 mm bore fancy type complete all as specified and directed.

S & F Waste coupling of PTMT (half or full thread). (Minimum weight 32 mm-45 gms / 40mm-60gms) for 32mm bore dia of discharge pipe fixed to WHB, sink complete all as specified and directed.

S & F bib tap cast copper alloy chromium plated fancy type with crutch of butterfly handle, screwed down, screwed for iron pipe of for brass ferrule of 15mm bore (ISI marked) complete all as specified and directed.

S&F PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed, fixed to wall complete all as specified and directed.

S&F PVC gully trap square or round mouthed type (P) , size of trap 125x 110mm and jointing to drains with solvent cement in repairs complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110mm bore PVC (SWR) bend or tee or radius complete all as specified and directed.

M&L for PVC (SWR) WC connector with lip ring 110mm complete all as specified and directed.

M&L for PVC (SWR) vent cowl for 75 mm dia complete all as specified and directed.

M&L for PVC (SWR) Reducer 110/75mm dia complete all as specified and directed.

M&L for 6mm thick E board (classic) of size 610x610mm as in false ceiling fixed with aluminum snap grid frame work of same size as aluminum Tee of size 25x25x1.50mm as main runner, 25x25x1.25mm thick aluminum Tee as cross runner and aluminum angle of size 25x25x1.25mm at the perimeter including Gl 6mm adjustable suspender of required length of any description complete all as specified and directed. Note: The design and specification of the ceiling board to be approved by the GE.

M & L for lagging on pipe of internal dia 15mm used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 complete all as specified and directed.

M & L for lagging on pipe of internal dia 20mm used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9843 complete all as specified and directed.

S& F towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) complete all as specified and directed.

S& F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 Ltr capacity hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S & F for 20 mm dia ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass and fixed complete all as specified and directed.

S & F 20 mm bore stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed complete all as specified and directed.

M&L for providing 100mm thick cement concrete type B-1, 1:4:8 (40mm graded aggregate) complete all as specified and as directed.

Sand filling under floor or in foundation including watering and consolidation complete all as specified and as directed.

M&L 60mm thickness, M-35 grade, machine pressed precast concrete interlocking paver glazed finished coloured block any shape and size conforming to IS 15658-2006, set and jointed with grey cement and pigment complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregates as in cills, lintels, upto 1.50 metre clear span, copings, benching, bed plates etc. and in similar works including weathering, slightly rounded or chamfered angles and throating and necessary form works complete all as specified and as directed.

M&L for Reinforced concrete pipes, class NP-2,150 mm bore laid and jointed with collars complete all as specified and as directed.

M&L for concrete bed to drain pipes of bore 150mm including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate including necessary shuttering and supports complete all as specified and as directed.

S&F 100 mm bore CI Bend (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.

S&F 75 mm bore CI Bend (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.

M&L for precast cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in cover slabs, (for man holes) chullah hoods, chajjas, shelves and similar articles with plain faces and set in mortar 1:6 complete all as specified and as directed.

S&F Mild steel framed work such as door or gates of angle or other section with gusset plates, rails braces etc., with ornamental and intricate design complete. drilled for fixing for steel sheeting or other covering doors, etc to be prepared for hanging or sliding with and including either hooks and hinges and hanging , also fastening and fixing including shop coat of zinc chromate paint conforming to Fe-290 Gde E-165 complete all as specified and as directed.

M&L for construction of 50 users septic tank complete all as specified and shown on drawing No. CESZ-TD-/2015 sheet No 1/3 & 2/3 dated 22 Feb 2015 (Revised dt 21 Mar 2015) and specified in particular specifications.

M&L for construction of Soakage well, of size 1.8 m dia at bottom and 3.0 m effective depth complete all as specified and shown on drawing No. CESZ-TD-/2015 sheet No 1/3 & 3/3 dated 22 Feb 2015 (Revised dt 21 Mar 2015) and specified in particular specifications.

M&L for PCC 1:3:6 type C-2, using 40mm graded stone aggregate as in foundation, filling and mass concreting complete all as specified and as directed.

M & L for stone walling of random rubble stone masonry built in Cement mortar 1:4 uncoursed, well bonded, bedded and solidly hearted and pointing surface in contact with earth in the same mortar, including providing weep holes as the work proceeds complete all as specified and directed.

M&L for rendering 20mm thick on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses for 40mm granite or trap stone complete all as specified and as directed

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and as directed.

S&F 4 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and as directed

S&F 75 mm bore PVC(SWR) bend of tee complete all as specified and as directed

Supply only integral water proofing compound complete all as specified and as directed

Material and labour point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, and 1.5 sqmm nominal cross sectional area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly with and including 1.6 mm thick cadmium plated sunk MS pressed steel terminal boxes with 3.0 mm thick hylam sheet cover fixed with brass screw complete with all accessories for on light point/ Fan point controlled by one, 1-Way switch complete all as specified and directed.

All as per item No 99 mentioned here-in- above but one 5 pin 5 Amps socket out let on independent board with 1.5 sq mm PVC insulated copper conductor for continuous earthing complete all as specified and directed.

All as per item No 99 mentioned here-in- before but 6 pin15 Amps socket outlet on independent board with 4 sq mm PVC insulated and sheathed copper conductor with 4 sq mm PVC insulated copper conductor single core for continuous earthing complete.

S&F switch piano flush button single pole, one way 5 Amps complete all as specified and directed.

M & L for Switch Socket Combination 2 in 1, 3 pin, 6 Amps flush type complete all as specified and directed.

M & L for Switch Socket Combination 5 in 1, 3 pin, 6 Amp and 16 Amps flush universal type complete all as specified and directed.

Supply and fix water heater storage type, electric capacity 25 litre along with all accessories BEE 5 star rated, complete all as specified and directed.

M & L for ceiling rose, PVC/Polycarbonate three terminals complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S & F in replacement LED light fitting 1x9W/10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers including fixing arrangement complete all as specified and directed.

M & L sheet metal enclosure for SPN DB 8 way double door type with 200 Amps rated busbar including necessary connection complete all as specified and directed.

S&F MCB's single pole 240 volts 6 to 32Amps 10 KA 'C' series, complete all as specified and directed.

S&F MCB single pole & neutral 40 to 63 Amps 230 Volts 'C' series, 10 KA complete all as specified and directed.

S&F 1100 volt grade heavy duty cable PVC insulated multistranded aluminium conductor served with PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including 4mm dia GI suspension wire one twin core flat cable of size 16 sqmm complete all as specified and as directed.

M&L for earthing complete with galvanised earthy plate electrode 600 x 600 x 6 mm thick buried directly in ground ( earth pit not less than 2.25 m deep below normal ground level ) with top edge of the plate not less than 1.5 meter below normal ground level, the earth plate surrounded by a mixture of charcoal dust and salt to a packed thickness of 150 mm on all sides with and including necessary excavation earth work returning, filling in and removal of surplus soil upto 50 mtr including GI wire 4 mm dia bolted and riveted to earth plate at one end and connected to continuous GI earth wire encased in and including 15 mm GI light grade pipe for watering and GI wire protection pipe upto 7.5 mtr with funnel with wire mesh on top with earth pit chamber and cover with all fittings from top edge of earth plate complete as specified and as shown in electrical plate no. 3 complete all as specified and directed.

S&F GI water tubing 25mm bore 'medium grade', galvanized, with all fittings like socket, union, elbow, bend, tees etc jointed complete all as specified and as directed.

S&F gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of bore of 25mm complete all as specified and as directed.

S&F ferrule to the existing main water supply pipe line 150/100/80 mm bore CI/DI/GI line for branch connection of the internal dia 20 mm Straight plain brass ferrules (or connecting screws) screwed both ends and internal dia 40 mm complete all as specified and as directed.

M/S AK CONSTRUCTION (BID ID -3468522)

MS SHEIKH NADEEM AKBAR (BID ID -3468518)

M/S LONE CONSTRUCTION COMPANY (BID ID -3468558)

M/S ABDUL AZIZ MIR (BID ID -3468748)

M/s Pall Constructions (BID ID -3468699)

M/S GHULAM AHMAD BABA (BID ID -3468185)

Bidder Name

M/s Pall Constructions

M/S ABDUL AZIZ MIR

M/S GHULAM AHMAD BABA

M/S AK CONSTRUCTION

MS SHEIKH NADEEM AKBAR

M/S LONE CONSTRUCTION COMPANY

MS NASEER AHMAD PEERZADA