REPAIR/COMPREHENSIVE MAINT OF CWE OFFICE 1806 POINEER UNIT 137 TA 20 ADU 41 FARS AND SSD COMPLEX AND ADJOINING AREAS UNDER GE (WEST) LUCKNOW

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority: GE (WEST ) Lucknow

Name of Work : REPAIR/COMPREHENSIVE MAINT OF CWE OFFICE, 1806 POINEER UNIT, 137 TA, 20 ADU, 41 FARS AND SSD COMPLEX AND ADJOINING AREAS UNDER GE (WEST) LUCKNOW

Contract No: GE/W/LKO/T-57 OF 2026-27

Sl. No. Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

1 M & L brickwork with fly ash bricks, Modular bricks straight or curved on plan exc 6m mean radius, built in, built in CM (1:6) and including demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches , pillars etc complet all as specified and directed. 4 Cum Excess(+) Full Conversion INR

2 Taking down existing cement plaster and clean the floor or wall surface for treatment by removing dust, dirt and loose particles over the surface etc by mechanical means included the following items: (a) Providing and applying the water based silicon water repellent. It shall be mixed with water in brick work or concrete surfaces in 1:10 ratio or as per manufacturer's instruction. (b) Providing and applying one coat of modified cementitious bonding agent / water proofing coating treatment over the treated area of water repellent mixed with 1 part of cement and 1 part of Latex SBR/Bond SBR. (c) Providing & laying polymer, water proofing compound & fiber based ready mix plaster for rendering 15 mm thick in CM (1:4) on brick walls, finished even & smooth without using extra cement complete as per manufacturer's instructions. 300 Sqm Excess(+) Full Conversion INR

3 Taking down existing cement plaster and clean the ceiling surface for treatment by removing dust, dirt and loose particles over the surface etc by mechanical means included the following items : (a) Providing & laying polymer, water proofing compound & fiber based ready mix plaster for rendering 5 mm thick in CM (1:3) on ceiling surfaces, finished even & smooth without using extra cement complete as per manufacturer's instructions. 30 Sqm Excess(+) Full Conversion INR

4 M & L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper over a coat of priming (internal surfaces only) complet all as specified and directed. NOTE : (i) The contractor is adivised to quote their rates as per MOU accordingly. (ii) Please see notes also as mentioned in BoQ item No 22 and Schedule `A' Notes 26 on ser Page No 21 of Tender. 150 Sqm Excess(+) Full Conversion INR

5 M & L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint (external surfaces only) complete all as specified and directed. 150 Sqm Excess(+) Full Conversion INR

6 M & L preparation of new surfaces of of ceiling and applying two coats of white wash on ceiling complete all as specified and directed. 30 Sqm Excess(+) Full Conversion INR

7 Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7" /9" to make free from dust, loose paint etc by skilled labour complete all as specified and directed. NOTE : (i) The contractor is adivised to quote their rates as per MOU accordingly. (ii) Please see notes also as mentioned in BoQ item No 22 and Schedule `A' Notes 26 on ser Page No 21 of Tender. 4000 Sqm Excess(+) Full Conversion INR

8 M & L 1 mm thick wall care putty on wall in two coats and smooth finished by sanding with mechanical sander (internal surfaces only) complete all as specified and directed. NOTE : (i) The contractor is adivised to quote their rates as per MOU accordingly. (ii) Please see notes also as mentioned in BoQ item No 22 and Schedule `A' Notes 26 on ser Page No 21 of Tender. 4000 Sqm Excess(+) Full Conversion INR

9 M&L for preparation of new surfaces of wall and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. NOTE:- (a) The work pertaining to painting work shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials like acrylic emulstion paint, OBD, synthetic enamel paint, putty etc (as applicable) after approval by the GE. (b) The contractor shall upload with the documents under cover-I "Memorandum of Understanding" (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. (c) Use of scaffolding, trestles, ladders,cradles etc necessary for execution of work and protective measures. (d) Removing of Nails, making good holes, cracks etc. (e) Work in patches and in narrow/widths, bands, cornices, pilasters etc and cutting in edge of line where necessary. (f) Spreading and removing covering to doors, windows, floors, fittings etc to protect them from splashes. (g) Washing floors, cleaning glass, joinery electric fittings, wiring etc, Drop and splashes of paint to be cleaned to the entire satisfaction of Engineer-in-Charge. (h) Sample patch of 10 Sqm be prepared considering all the items of periodical and shall be got approved from GE prior to carrying out further work. 4000 Sqm Excess(+) Full Conversion INR

10 M & L for prepration of old treated surface of walls, boundary/compound wall etc and applying two coats of white wash complete all as specified and directed. 10000 Sqm Excess(+) Full Conversion INR

11 M&L for complete removal of the existing old surface on walls and applying two coats of cement based paint over a coat of cement based primer including preparation of surfaces (external surfaces only) complete all as specified and directed. 4000 Sqm Excess(+) Full Conversion INR

12 M & L for preparation of old treated surface of ceiling and applying one coat of oil bound distemper (internal surfaces only) complete all as specified and directed. NOTE : (i) The contractor is adivised to quote their rates as per MOU accordingly. (ii) Please see notes also as mentioned in BoQ item No 22 and Schedule `A' Notes 26 on ser Page No 21 of Tender. 2000 Sqm Excess(+) Full Conversion INR

13 M & L for preparation of old treated surface of wall and applying one coat of oil bound distemper (internal surfaces only) complete all as specified and directed. NOTE : (i) The contractor is adivised to quote their rates as per MOU accordingly. (ii) Please see notes also as mentioned in BoQ item No 22 and Schedule `A' Notes 26 on ser Page No 21 of Tender. 4000 Sqm Excess(+) Full Conversion INR

14 M & L for preparation of old treated surface of wall and applying two coats of oil bound distemper (internal surfaces only) complete all as specified and directed. NOTE : (i) The contractor is adivised to quote their rates as per MOU accordingly. (ii) Please see notes also as mentioned in BoQ item No 22 and Schedule `A' Notes 26 on ser Page No 21 of Tender. 4000 Sqm Excess(+) Full Conversion INR

15 M & L for complete removal of existing treatment of old surface of wall and applying two coats of oil bound distemper (internal surfaces only) complete all as specified and directed. NOTE : (i) The contractor is adivised to quote their rates as per MOU accordingly. (ii) Please see notes also as mentioned in BoQ item No 22 and Schedule `A' Notes 26 on ser Page No 21 of Tender. 4000 Sqm Excess(+) Full Conversion INR

16 M & L for preparation of old treated surface of ceiling and applying one coats of whitewash complete all as specified and directed. 1000 Sqm Excess(+) Full Conversion INR

17 M & L for preparation of old treated wood or wood based surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. NOTE : (i) The contractor is adivised to quote their rates as per MOU accordingly. (ii) Please see notes also as mentioned in BoQ item No 22 and Schedule `A' Notes 26 on ser Page No 21 of Tender. 1100 Sqm Excess(+) Full Conversion INR

18 M & L for prepration of old treated steel surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. NOTE : (i) The contractor is adivised to quote their rates as per MOU accordingly. (ii) Please see notes also as mentioned in BoQ item No 22 and Schedule `A' Notes 26 on ser Page No 21 of Tender. 500 Sqm Excess(+) Full Conversion INR

19 M & L for preparing new or previously untreated surfaces of wood and wood based materials of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified.and directed. NOTE : (i) The contractor is adivised to quote their rates as per MOU accordingly. (ii) Please see notes also as mentioned in BoQ item No 22 and Schedule `A' Notes 26 on ser Page No 21 of Tender. 165 Sqm Excess(+) Full Conversion INR

20 M & L for preparing new steel & iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified.and directed. NOTE : (i) The contractor is adivised to quote their rates as per MOU accordingly. (ii) Please see notes also as mentioned in BoQ item No 22 and Schedule `A' Notes 26 on ser Page No 21 of Tender. 50 Sqm Excess(+) Full Conversion INR

21 M & L for preperation of surface of wall/chajja and applying a coat of tapecrete P-151 acrylic polymer modified cementitious slurry consisting of one part of TAPECRETE P-151 and two parts of cement by weight (external surfaces only) complete all as specified and directed. 50 Sqm Excess(+) Full Conversion INR

22 M & L for preparation of old surfaces on wall and applying two coats of plastic emulsion paint (internal surfaces only) complete all as specified and directed. NOTES : Item No 04 , 07 to 09 , 12 to 15, 17 to 20 & 22: (a) The work pertaining to painting work shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials like Plastic emulsion paint, OBD, synthetic enamel paint, putty etc (as applicable) after approval by the GE. (b) The contractor shall upload with the documents under cover-I "Memorandum of Understanding" (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. (c) Use of scaffolding, trestles, ladders,cradles etc necessary for execution of work and protective measures. (d) Removing of Nails, making good holes, cracks etc. (e) Work in patches and in narrow/widths, bands, cornices, pilasters etc and cutting in edge of line where necessary. (f) Spreading and removing covering to doors, windows, floors, fittings etc to protect them from splashes. (g) Washing floors, cleaning glass, joinery electric fittings, wiring etc, Drop and splashes of paint to be cleaned to the entire satisfaction of Engineer-in-Charge. (h) Sample patch of 10 Sqm be prepared considering all the items of periodical and shall be got approved from GE prior to carrying out further work. 1000 Sqm Excess(+) Full Conversion INR

23 M & L for double charged virified ceramic tiles 8-10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement & sand mortar 1:6 & including dismantling of floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. 400 Sqm Excess(+) Full Conversion INR

24 M & L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 & including dismantling of floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. 250 Sqm Excess(+) Full Conversion INR

25 M & L for glazed ceramic tiles (coloured) 350x250x7mm/450 x 350 x 7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10 mm thick rendering in cement & sand mortar 1:4 & including dismantling of floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. 300 Sqm Excess(+) Full Conversion INR

26 M & L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.& including screed bed or bedding layer 15mm th in cement mortar 1:4 and including dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc.laid bedded and pointed in any mortar complete all as specified and directed. 40 Sqm Excess(+) Full Conversion INR

27 M & L for 40mm thick PCC 1:2:4, type B-1 using 20mm graded crushed stone aggregae as in floors, finished even and smooth using extra cement and including demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thickness below and above ground level complet all as specified and directed. 100 Sqm Excess(+) Full Conversion INR

28 Taking down chowkhat with shutter (without taking off shutter from the frame) and area not exc 1.5 sqm each complete all as specified & directed. 50 Each Excess(+) Full Conversion INR

29 Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.5 sqm and not exc 4.00 Sqm each complet all as specified and directed. 50 Each Excess(+) Full Conversion INR

30 Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each and refixing in same opening including easing and adjusting of shutter as required including renewal of unserviceable screws complete all as specified and directed. 20 Per Leaf Excess(+) Full Conversion INR

31 Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each and removal from site complet all as specified and directed. 50 Per Leaf Excess(+) Full Conversion INR

32 S & F IInd class hard wood Plain, solid, straight chowkhats & frames, wrought, framed rebated on the solid, rounded or chamfered,put together with glue pinned at joints, supplied and fixed complete all as specified and directed. 1 Cum Excess(+) Full Conversion INR

33 M & L for plain cement concrete type C-1 (1:3:6) using 20mm graded stone aggregate for embedding of holdfasts etc complete all as specified and directed. 0.2 Cum Excess(+) Full Conversion INR

34 M & L 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. 100 Sqm Excess(+) Full Conversion INR

35 S & F factory made 35mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 (a) of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat complete all as specified & directed. 100 Sqm Excess(+) Full Conversion INR

36 S & F PVC solid door frame of size 50x47mm made out of 5m plain coloured sheet reinforced with MS square tube & with wood grain printed complete all as specified and directed. 100 RM Excess(+) Full Conversion INR

37 S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawings complete all as specified and directed. 100 Sqm Excess(+) Full Conversion INR

38 S & F 250 mm long Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sectionS & Fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. 25 Each Excess(+) Full Conversion INR

39 S & F mild steel helical door spring 300 mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed. 25 Each Excess(+) Full Conversion INR

40 S & F of aluminium butt hinges medium weight 100mm type C-21 complet all as specified and directed. 50 Each Excess(+) Full Conversion INR

41 S & F butt hinges of size 100 mm medium weight, cold rolled mild steel complete all as specified and directed. 120 Each Excess(+) Full Conversion INR

42 S & F aluminium handle, 150mm size, cast type, anodized complete all as specified and directed. 115 Each Excess(+) Full Conversion INR

43 S & F 200mm long alumunium anodised barrel tower bolts of extructed section complete all as directed and directed. 110 Each Excess(+) Full Conversion INR

44 S & F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire, staples complete all as specified and directed. 150 sqm Excess(+) Full Conversion INR

45 S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire, staples complete all as specified and directed. 20 sqm Excess(+) Full Conversion INR

46 S& F in repair 18/19mm block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work complete all as specified and directed. 25 Sqm Excess(+) Full Conversion INR

47 S & F 0.9 mm thick sunmica/laminator with decorative lamination fixed with synthetic Glue / Adhesive to timber frame/wood work, edge chamfered complete all as specified and directed. 40 Sqm Excess(+) Full Conversion INR

48 M & L for mild steel work as in bands, straps, clamps , hold fasts, wall tiles, plain angle cleats for securing purlins to wood trusses or rafters, and similar samll articles confirming to Fe-290 Gde -E-165 complete all as specified and directed. 5 Kg Excess(+) Full Conversion INR

49 S & F in repair two (double) legged floor door stopper of aluminum body & tougues anodess with hard drawer steel spring fixed in floor of over all length of cover plate 140mm complete all as specified and directed.. 50 Each Excess(+) Full Conversion INR

50 S & F in repair 450mm long Stainless steel six peg hanger chromium plated complete all as specified and directed. 20 Each Excess(+) Full Conversion INR

51 S & F in repair heavy duty CP mild steel hanging rod 20mm dia with end brackets & fixed with screw complet all as specified and directed. 5 RM Excess(+) Full Conversion INR

52 Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frame including punching or drilling out old glazing pins/spring clips complete all as specified.and directed. 20 Sqm Excess(+) Full Conversion INR

53 S & F Sheet glass 4mm thick ordinary quality and glazing with rubber bedding etc in suqares n exc 0.5 Sqm in each pane complete all as specified.and directed. 10 Sqm Excess(+) Full Conversion INR

54 S & F 4 mm thick figured glass pin headed type and glazing with oil putty in square n exc 0.5 sqm in each pan complete all as specified and directed. 10 Sqm Excess(+) Full Conversion INR

55 S & F 2nd class hard wood Plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails or brads in area not exc 3 Sqm CM complete all as specified and directed. 200 Rm Excess(+) Full Conversion INR

56 S & F continuous (Piano)) hinges mild steel bright finished or electo galvanised with width of flap 30 mm when open and fixed with screws complete all as specified and directed. 150 RM Excess(+) Full Conversion INR

57 S & F 100 mm long aluminium anodiesed, haps and staple, safety type with steel hinges pin including bolts to hinge plate and fixed with srews complete all as specified and directed. 10 Each Excess(+) Full Conversion INR

58 S & F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed. 100 Each Excess(+) Full Conversion INR

59 S & Fin repair sliding chanel of drawer 450 to 600 mm long,mild steel, chromium plated, heavy duty, suririor quality and fixed complete all as specified and directed 20 Each Excess(+) Full Conversion INR

60 S & F in repair medium grade stainless steel 25mm dia curtain rods including brackets & fancy type end knobs complete all as specified and directed. 200 RM Excess(+) Full Conversion INR

61 S & F in repair fancy type PVC coated decorative curtain rod of 25mm dia of approved shade including MS bracket/wall to wall including latto on each end complete all as specified and directed. 200 RM Excess(+) Full Conversion INR

62 S & F in repair framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. 400 Kg Excess(+) Full Conversion INR

63 M & L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings & fixed complete to walls and ceilings or laid in floors including taking up or down steel water tubing and connections of 15mm bore, fixed in walls, ceiling, floors, trenches etc. complete all as specified and directed. 100 RM Excess(+) Full Conversion INR

64 M & L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings & fixed complete to walls and ceilings or laid in floors. including taking up or down steel water tubing and connections of 20mm bore, fixed in walls, ceiling, floors, trenches etc. complete all as specified and directed. 50 RM Excess(+) Full Conversion INR

65 M & L for cutting chases, pinning in, making good to facings as original where required and pointing in cement mortar 1:3 for concealed water tubing etc. and making good, cutting not exc 10 cm girth in brick walls complete all as specified and directed. 100 RM Excess(+) Full Conversion INR

66 S & F in repairs vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling, making good to floor complete all as specified and directed. NOTE : The work for Sanitary & CP Fittings shall include the following and the rates quoted by the bidder shall include the same:- (i) The work pertaining to Sanitary & CP Fittings shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials as pertains to Sanitary & CP Fittings after approval by the GE. (ii) The contractor shall upload with the documents under cover-I "Memorandum of Understanding" (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. 10 Each Excess(+) Full Conversion INR

67 S & F in repair Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, seat cover and flush pipe complete all as specified and directed. NOTE : The work for Sanitary & CP Fittings shall include the following and the rates quoted by the bidder shall include the same:- (i) The work pertaining to Sanitary & CP Fittings shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials as pertains to Sanitary & CP Fittings after approval by the GE. (ii) The contractor shall upload with the documents under cover-I "Memorandum of Understanding" (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. 10 Each Excess(+) Full Conversion INR

68 S & F in repairs PVC valveless syphonic action type low level flushing cistern of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified and directed. NOTE : The work for Sanitary & CP Fittings shall include the following and the rates quoted by the bidder shall include the same:- (i) The work pertaining to Sanitary & CP Fittings shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials as pertains to Sanitary & CP Fittings after approval by the GE. (ii) The contractor shall upload with the documents under cover-I "Memorandum of Understanding" (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. 50 Each Excess(+) Full Conversion INR

69 S & F in repair flush syphon Kit for any respective pattern for low level flushing cistern any description complete all as specified and directed. NOTE : The work for Sanitary & CP Fittings shall include the following and the rates quoted by the bidder shall include the same:- (i) The work pertaining to Sanitary & CP Fittings shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials as pertains to Sanitary & CP Fittings after approval by the GE. (ii) The contractor shall upload with the documents under cover-I "Memorandum of Understanding" (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. 100 Each Excess(+) Full Conversion INR

70 S & F in repairs vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks & fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug) complete all as specified and directed. NOTE : The work for Sanitary & CP Fittings shall include the following and the rates quoted by the bidder shall include the same:- (i) The work pertaining to Sanitary & CP Fittings shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials as pertains to Sanitary & CP Fittings after approval by the GE. (ii) The contractor shall upload with the documents under cover-I "Memorandum of Understanding" (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. 20 Each Excess(+) Full Conversion INR

71 S & F in repairs long body 15mm bore bib tap, cast copper alloy, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule including CP flange complete all as specified & directed. NOTE : The work for Sanitary & CP Fittings shall include the following and the rates quoted by the bidder shall include the same:- (i) The work pertaining to Sanitary & CP Fittings shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials as pertains to Sanitary & CP Fittings after approval by the GE. (ii) The contractor shall upload with the documents under cover-I "Memorandum of Understanding" (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. 120 Each Excess(+) Full Conversion INR

72 S & F in repairs CP angle valve long body for 15 mm bore pipe with capstan head long screwed shank including CP flange fancy type complete all as specified and directed. NOTE : The work for Sanitary & CP Fittings shall include the following and the rates quoted by the bidder shall include the same:- (i) The work pertaining to Sanitary & CP Fittings shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials as pertains to Sanitary & CP Fittings after approval by the GE. (ii) The contractor shall upload with the documents under cover-I "Memorandum of Understanding" (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. 120 Each Excess(+) Full Conversion INR

73 S & F in repair 15mm bore fancy type CP concealed type, stop valve cast copper alloy screwed down high pressure with capstan head and cup, screwed both ends for iron pipe or for union complete all as specified and directed. NOTE : The work for Sanitary & CP Fittings shall include the following and the rates quoted by the bidder shall include the same:- (i) The work pertaining to Sanitary & CP Fittings shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials as pertains to Sanitary & CP Fittings after approval by the GE. (ii) The contractor shall upload with the documents under cover-I "Memorandum of Understanding" (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. 20 Each Excess(+) Full Conversion INR

74 S & F in repair fancy type pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks & fly nuts, screwed for iron pipes & fixed for 15mm dia complete all as specified and directed. NOTE : The work for Sanitary & CP Fittings shall include the following and the rates quoted by the bidder shall include the same:- (i) The work pertaining to Sanitary & CP Fittings shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials as pertains to Sanitary & CP Fittings after approval by the GE. (ii) The contractor shall upload with the documents under cover-I "Memorandum of Understanding" (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. 50 Each Excess(+) Full Conversion INR

75 S & F in repairs brass chromium plated shower rose 125 mm size without swivel joint including fixing to steel pipe of 15mm bore or union complete all as specified and directed. NOTE : The work for Sanitary & CP Fittings shall include the following and the rates quoted by the bidder shall include the same:- (i) The work pertaining to Sanitary & CP Fittings shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials as pertains to Sanitary & CP Fittings after approval by the GE. (ii) The contractor shall upload with the documents under cover-I "Memorandum of Understanding" (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. 50 Each Excess(+) Full Conversion INR

76 S & F in repair central hole wash hand basin mixer,fancy type,brass chromium plated, with reound spout with poup waste system , including plugging and fixed, suitable of 15 mm bore pipe complete all as specified and directed. NOTE : The work for Sanitary & CP Fittings shall include the following and the rates quoted by the bidder shall include the same:- (i) The work pertaining to Sanitary & CP Fittings shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials as pertains to Sanitary & CP Fittings after approval by the GE. (ii) The contractor shall upload with the documents under cover-I "Memorandum of Understanding" (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. 30 Each Excess(+) Full Conversion INR

77 S & F in repair wall mixer L-bend type with connecting legs and wall flanges, fancy type brass chromium plated, with closted swinging spout including plugging and securing to walls suitable for 15 mm bore pipe complete all as specified and directed. NOTE : The work for Sanitary & CP Fittings shall include the following and the rates quoted by the bidder shall include the same:- (i) The work pertaining to Sanitary & CP Fittings shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials as pertains to Sanitary & CP Fittings after approval by the GE. (ii) The contractor shall upload with the documents under cover-I "Memorandum of Understanding" (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. 30 Each Excess(+) Full Conversion INR

78 S & F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. 100 Each Excess(+) Full Conversion INR

79 S & F in repair glass corner shelves fancy type 6mm thick 250x250mm size and fixed over CP brass brackets complet all as specified and directed. 100 Each Excess(+) Full Conversion INR

80 S & F in repairs brass chromium plated tubular towel rail 20 mm dia D type, 60 cm long between flanges complet all as specified and directed. NOTE : The work for Sanitary & CP Fittings shall include the following and the rates quoted by the bidder shall include the same:- (i) The work pertaining to Sanitary & CP Fittings shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials as pertains to Sanitary & CP Fittings after approval by the GE. (ii) The contractor shall upload with the documents under cover-I "Memorandum of Understanding" (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. 100 Each Excess(+) Full Conversion INR

81 S & F in repairs brass spindle for concealed stop cock any type or pattern complete all as specified and directed. NOTE : The work for Sanitary & CP Fittings shall include the following and the rates quoted by the bidder shall include the same:- (i) The work pertaining to Sanitary & CP Fittings shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials as pertains to Sanitary & CP Fittings after approval by the GE. (ii) The contractor shall upload with the documents under cover-I "Memorandum of Understanding" (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. 50 Each Excess(+) Full Conversion INR

82 S & F in repairs brass spindle for bib tap/stop cock/angle valve etc any type or pattern complete all as specified and directed. NOTE : The work for Sanitary & CP Fittings shall include the following and the rates quoted by the bidder shall include the same:- (i) The work pertaining to Sanitary & CP Fittings shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials as pertains to Sanitary & CP Fittings after approval by the GE. (ii) The contractor shall upload with the documents under cover-I "Memorandum of Understanding" (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. 180 Each Excess(+) Full Conversion INR

83 S & F 500 litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical, vertical with closed top), hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including dismantling PVC water tanks and removing for capacity exceeding 250 litres & not exceeding 500 litres etc complete all as specified and directed. 15 Each Excess(+) Full Conversion INR

84 S & F 1000 litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical, vertical with closed top), hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc including dismantling PVC water tanks and removing for capacity exceeding 500 litres & not exceeding 1000 litres etc complete all as specified and directed. 10 Each Excess(+) Full Conversion INR

85 S & F 15 mm ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe, complete all as specified and directed. 25 Each Excess(+) Full Conversion INR

86 S & F in repair 15 mm ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed. 100 Each Excess(+) Full Conversion INR

87 S & F in repair 20 mm ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed. 50 Each Excess(+) Full Conversion INR

88 S & F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps complete all as specified and directed. 120 RM Excess(+) Full Conversion INR

89 S & F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps complete all as specified and directed. 30 RM Excess(+) Full Conversion INR

90 S & F in repair 600x450x5mm thick bevelled edge looking mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood or PVC sheet and fixed to wooden plug with chromium plated brass screws and cup washers complete all as specified and directed. 50 Each Excess(+) Full Conversion INR

91 S & F in repair of plastic water closet seat cover, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hanging device complete all as specified and directed. NOTE : The work for Sanitary & CP Fittings shall include the following and the rates quoted by the bidder shall include the same:- (i) The work pertaining to Sanitary & CP Fittings shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials as pertains to Sanitary & CP Fittings after approval by the GE. (ii) The contractor shall upload with the documents under cover-I "Memorandum of Understanding" (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. 100 Each Excess(+) Full Conversion INR

92 S & F in repair toilet paper holder, CP box type complete all as specified and directed. NOTE : The work for Sanitary & CP Fittings shall include the following and the rates quoted by the bidder shall include the same:- (i) The work pertaining to Sanitary & CP Fittings shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials as pertains to Sanitary & CP Fittings after approval by the GE. (ii) The contractor shall upload with the documents under cover-I "Memorandum of Understanding" (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. 50 Each Excess(+) Full Conversion INR

93 S & F in repair CP brass soap dish fancy type of one soap fixed with screw to wall complet all as specified and directed. NOTE : The work for Sanitary & CP Fittings shall include the following and the rates quoted by the bidder shall include the same:- (i) The work pertaining to Sanitary & CP Fittings shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials as pertains to Sanitary & CP Fittings after approval by the GE. (ii) The contractor shall upload with the documents under cover-I "Memorandum of Understanding" (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. 100 Each Excess(+) Full Conversion INR

94 S & F in repairs PVC connections 450mm long, 15 mm size with brass chromium plated nuts at ends complete all as specified and directed. 100 Each Excess(+) Full Conversion INR

95 S & F in repairs PVC connections 600mm long, 15 mm size with brass chromium plated nuts at ends complete all as specified and directed. 100 Each Excess(+) Full Conversion INR

96 S & F in repair PVC flexible waste Pipe, 32 mm bore for WHB /Sink complete all as specified and directed. 200 Each Excess(+) Full Conversion INR

97 S & F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connection & fixed in position complete all as specified and directed. NOTE : The work for Sanitary & CP Fittings shall include the following and the rates quoted by the bidder shall include the same:- (i) The work pertaining to Sanitary & CP Fittings shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials as pertains to Sanitary & CP Fittings after approval by the GE. (ii) The contractor shall upload with the documents under cover-I "Memorandum of Understanding" (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. 200 Each Excess(+) Full Conversion INR

98 S & F in repair sink with drainage board size 1145x510 mm, bowl size 560x410x200 mm made of stainless steel sheet 1.00mm thick with plugs, washers and wastes pipe & coupling etc incl bedding in cement mortar to dwarf wall or cantilever brackets and connecting union to pipe complet all as specified and directed. 10 Each Excess(+) Full Conversion INR

99 S & F in repair stainless steel kitchen plate rack made out of 0.63mm thick stainless steel sheet of size 750x600 mm including screws and weight not less than 5.00 Kg complet all as specified and directed. 10 Each Excess(+) Full Conversion INR

100 Cleaning and removing all scale and dirt, etc, from tanks & from mouths of circulating pipes, etc exc 250 and n exc 500 capacity in litres and write date of cleaning and due date of cleaning on OHT complete all as specified and directed. 100 Each Excess(+) Full Conversion INR

101 Cleaning and removing all scale and dirt, etc, from tanks & from mouths of circulating pipes, etc exc 500 and n exc 1000 capacity in litres and write date of cleaning and due date of cleaning on OHT complete all as specified and directed. 100 Each Excess(+) Full Conversion INR

102 S & F in repair 0.50 mm thick pre-painted galvalume aluminium zinc alloy coated steel (550 Mpa) corrugated sheet of any colour, double ribbed trapezoidal profile in desired length etc, as in roof covering/cladding to wall, with joints overlapped and fastened with fasteners using hot dipped zinc coated self drilling hexagonal washer head fasteners complete all as specified and directed. 500 Sqm Excess(+) Full Conversion INR

103 S & F in repair for Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated), Fe - 410- W(Gde - E 250 quality B) complete all as specified and directed 100 Kg Excess(+) Full Conversion INR

104 S & F magnet catcher heavy duty for cupboard shutter complete all as specified and directed. 50 Each Excess(+) Full Conversion INR

105 Taking down existing cement plaster and clean the surfaces of wall inncluded the following itmes : (a) Providing and applying the water based silicon water repellent. It shall be mixed with water in brick work or concrete surfaces in 1:10 ratio or as per manufacturer's instruction. (b) Providing and applying one coat of modified cementitious bonding agent / water proofing coating treatment over the treated area of water repellent mixed with 1 part of cement and 1 part of Latex SBR/Bond SBR. (c) Providing & laying polymer, water proofing compound & fiber based ready mix plaster for rendering 15 mm thick in CM (1:4) on brick walls, finished even & smooth without using extra cement complete as per manufacturer's instructions. 20 Sqm Excess(+) Full Conversion INR

106 S & F in repair aluminium (die cast) body door closer hydraulically regulated designation No. 3 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and directed. 50 Each Excess(+) Full Conversion INR

107 S & F in repair of suspended ceiling system of grid/section of size 600x600mm comprising of interlocking GI powder coated main T-runners of size 24x38x0.33mm thick of length 3000mm, cross-T of size 24X32X0.33mm thick of length 1200mm and secondary intermediate cross-T of size 24X32X0.33mm thick of length 600mm and perimeter wall angle of size 24x24x0.40mm thick of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plugs @ 450mm center to center and 40mm long dry wall S.S. screws with and including 4 mm thick E-board false ceiling tiles of size 595x595mm of approved texture, design and pattern to be placed in the grid system duly suspended with 6 mm dia GI wire hangers fixed with steel dash fasteners or from purlin of the roof with clip complete all as specified and directed. 100 Sqm Excess(+) Full Conversion INR

108 M & L machine cut kota stone slab flooring 20-25mm thick over and including 15 mm thick screed bed in cement mortar 1:6 laid and bedded jointed cement slurry mixed with pigment to match to shade of the slab including grinding, mirror polishing including dismantling of floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. 100 Sqm Excess(+) Full Conversion INR

109 S & F in repair 15mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms) complete all as specified and directed. 200 Each Excess(+) Full Conversion INR

110 S & F in repair mortice lock 2 levers aluminium, vertical type, size 100 mm complete all as specified and directed. 20 Each Excess(+) Full Conversion INR

111 S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of frame size 65x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant complete all as specified and directed. 3 RM Excess(+) Full Conversion INR

112 S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face)& 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. Note: stainless steel butt hinges and necessary S.S screws shall be paid separately. 2 Sqm Excess(+) Full Conversion INR

113 S&F 35 mm thick factoruy made wire mesh solid WPC pre laminated both side door shutter consisting of density 650 kg/cbm manufactured by an ISO-9001-2015certify company, Door to be panelled with ss mosquito mesh and XTN aluminium mesh for additional strength and safety purpose. (conforming as per S:4020). The door should be water proof, termite proof,fire retradant and having screw holding capacity. Door to be fixed to framewirh 3 nos MS Powder coated butt hinges size 100 mm*25 mm*2mm and 32mm long steel screws drilled suitable to pass through both the walls of the MS tube. other hardwares should be fixed with 19*6 mm size steel screws etc complete all as specified and directed. 2 Sqm Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures

Please Enable Macros to View BoQ information