138WE/L-78/24-25

Amount

Repair to pot holes any depth, not exceeding 1 sqm each including sweeping free dust and mud or water, scoring sunken surfaces in roads,paths etc cutting around edges to at least 25mm in depth making good by applying tack coat @05 Kg per 10 Sqm putting in premixed bituminious macadam, well rammed and sealed with binder 9.80 kg per 10 sqm binded with 0.09 cum of stone chippings 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), complete all as specified and directed by Engr-in-Charge.

M&L for preparing existing black top surfaces with wire brushes for removing cracked mud etc, sweeping with brooms and finally fannings the cleaned surfaces with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat with paving bitumen (VG-10) at the rate of 5 Kgs per 10 Sqm of road surfaces all as specified and directed.

M&L Premix bituminous macadaam (Design Mix), laid/rolled and compacted to required gradient and camber (consolidated) thickness 75 mm or less by binder content paving bitumen of (VG-10) of 4% by weight of total mix laid with self propelling mechanical paver and rolling with 8 to 12 tonne power road roller to the required camber and gradient to uniform smooth surface, complete all as specified and as directed.

M&L for paving bitumious premixed asphaltic dense concrete 40 mm consolidated thickness with 5.5% binder contained by weight of total mix with Paving Bitumen of VG-10, rolled and compacted with rolling with 8 to 12 tonne power road roller to the required camber and gradient to uniform smooth surface, complete all as specified and as directed.

M&L for providing and marking broken/continous central / end line on the road pavement and the like of description and width using hot applied thermoplastic compund 2.50 mm thick (excluding thickness of glass beads) an providing reflective glass beads @ 250 gm per SQM as per IRC-135, confirming to MORTH complete all as specified.

S&F in repair at eye solar reflective type of metal body alloy of size 100 mm x 100 mm x 20 mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions. Complete all as specified and directed.

KONCHOK TSEWANG (BID ID -3102834)

Mohammad Sultan & Brothers (BID ID -3127658)