Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.2 LAccepted-AOC | L1 | Accepted-AOC LOWEST / L1 | |
| 2 | L2₹44.0 L+₹35,144.83 (0.81%)Rejected-Finance 88 GIRRAJ NAGAR KALWAD ROAD JOTHWARA JAIPUR 302012 JAIPUR CITY NORTH RAJASTHAN 302012 | JAIPUR | RAJASTHAN | 302012 | L2 | Rejected-Finance Other Than First Lowest | |
| 3 | L3₹44.7 L+₹1.1 L (2.44%)Rejected-Finance | L3 | Rejected-Finance Other Than First Lowest | |
| 4 | L4₹45.8 L+₹2.2 L (5.04%)Rejected-Finance H NO 209 D SHRI SHIVA NAGAR IV MANCHARA SIKAR ROAD JAIPUR | JAIPUR | JAIPUR | RAJASTHAN | 302013 | L4 | Rejected-Finance Other Than First Lowest | |
| 5 | L5₹49.9 L+₹6.3 L (14.5%)Rejected-Finance | L5 | Rejected-Finance Other Than First Lowest |
Tender Value
Refer Docs
EMD Value
₹95,000
Closing Date
4 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Jaipur
GE Jaipur
SPL REPAIR TO BLDG NO. P-21 MD ACCN (NCUs) ALONGWITH CERTAIN REVENUE WORKS AND MINOR WORKS IN ZONE-I AREA ATJAIPUR MIL STN
2023_MES_630843_1
GE/J-60/2023-24
Open Tender
Civil Works
Item Rate
270 days
GE Jaipur
As per Tender Documents
5 documents required · 5 mandatory
₹500
GE Jaipur
₹95,000
Yes
7 Mar 2024
2 Dec 2023
6 Jan 2024
2 Dec 2023
4 Jan 2024
22 Dec 2023
Amount
B/R Portion Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sqm on plan and n exc 1.5m in depth and getting out in soft/ loose soil
M&L Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm
Removing excavated material exc 250 m but not exc 500 m and deposited where directed at a level n exc 1.5 m above the starting point.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and raming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed
M&L Sand filling under floor,spreading and levelling in layers 250 mm thick in each layer complete all as specified and directed
M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified & directed.
M&L for PCC 1:3:6 type C2 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified & directed.
M & L plain Cement Concrete1:2:4 type B1 (20mm graded aggregate) as in cill ,plinth course coping ,apex stone and similar work complete all as specified & directed
M & L 40mm thick plain cement concrete 1:2:4 type B1 (using 20mm graded aggregate) in sub base of floors complete all as specified and directed
Taking down cement plaster any description, on brick or stone walls, etc. including raking out joints, hacking for key & scrubbing down with water, etc. & removing rubbish outside MD land complete all as directed.
Dismantling of cement concrete tiles, glazed tiles, terrazo tiles in floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish outside MD land complete all as specified and directed.
Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness below or above ground level complete all as specified and directed incl removing the rubbish outside MD land complete all as specified and directed
Demolition of cement concrete in any description and in any position, not otherwise specifically provided for complete all as specified and directed incl removing the rubbish outside MD land complete all as specified and directed
Demolition of reinforced cement concrete reinforced roofs, floors (Other than ground floors), beams, staircases, landing, chajjas, slab & similar suspended work complete all as specified and directed incl removal all rubbish material outside of MD Land complete all as specified and directed
M&L rendering 15 mm thick in CM 1:4 on brick masonry surfaces on fair faces of brick masonry finished even and smooth without using extra cement complete all as specified and directed..
M&L rendering 15 mm thick in CM 1:6 on stone masonry surfaces or on other than fair faces of brick masonry finished even and fair witout using extra cement complete all as specified and directed.
M&L 15mm thick rendering in cement mortar 1:4 to stone masonry wall surfaces or on other than fair faces of brick wall surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L rendering 5 mm thick in CM 1:3 including as on concerete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed .
M&L rendering 5 mm thick in CM 1:3 n exc 3.00 sqm each patch in ceiling patches in ceilling finished even and smooth without using extra cement complete all as specified and directed
M&L Non- skid coloured ceramic matching tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc with coloured cement to match the shade of tile complete all as specified including 15 mm screed bed in CM 1:6 complete all specified & directed.
M&L for non skid coloured ceramic matching tiles 7 to 8mm thick (square / rectangular )area of each tiles exc 0.18 sqm but not exceeding 0.38 Sqm in floor etc with coloured cement to match the shade of tile complete all as specified including 15 mm screed bed in CM 1:6 complete all specified & directed.
M&L for non skid coloured ceramic matching tiles 7 to 8mm thick (square / rectangular )area of each tiles exc 0.18 sqm but not exceeding 0.38 Sqm in skirting etc with coloured cement to match the shade of tile complete all as specified including 10 mm rendering in CM 1:4 complete all specified & directed.
M&L coloured Glazed ceramic tiles (300 x 450 x 7mm thick), in wall etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including 10 mm rendering in CM 1:4 complete all as specified and directed .
M&L 15-16mm thick Granite work (table rubbed & polished) (Rajasthan black) in window-cills etc over & incl 15 mm screed thick in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of granite complete all as specified and directed
M&L 18-20 mm thick kesaria Udaipur Green marble (table rubbed & polished) in cooking plat forms,window cill & edges in and like in CM 1:4 incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed
M&L for 25mm marble slab ( machined polished ) as in vertical partitions , below kitchen cooking plat form and raised platform of kitchen, under kitchen platform complete all as specified and directed
M & L 25 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate as in floors complete all as specified and directed.
M&L screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:6, for laying floor finishes/tiles/kota stone etc complete all as specified and directed.
M & L Machine cut kota stone slab flooring 20-25mm thick of size 550x550 mm in floor laid over and incl 15 mm thick cement screed base laid in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed.
M & L Machine cut kota stone slab flooring 20-25mm thick in steps in single piece laid over 15 mm thick cement screed base laid in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed.
M & L Machine cut kota stone slab flooring 18 to 22mm thick in skirting , riser and etc & over and incl rendering 10 mm thick in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed. .
Rounding to edges of stone slab such as in steps (Kota stone)one edge complete all as specified and directed.
Rounding to edges of stone slab (granite) two edges such as in cooking platform complete all as specified and directed.
S & F 18 mm thick HDHMR (High density high moisture resistant) board one side white laminate and other side decorative as in kitchen cabinets fixed with minifix hardware where ever required including edge band 22 mm wide 0.80 m thick of matching colour on exposed surfaces of board fixed with polymaster adhessive of approved make including trimming edges of edge band to true line of thicknesss of board by manual trimmer complete all as specified and directed.
S & F 8 mm thick HDHMR (High density high moisture resistant) board of approgved make with one side white laminate and other side un decorative as in back of kitchen cabinets complete all as specified and directed.
S & F auto close hinges , stainless steel of grade SS-304 , bright finish fixed complete all as specified Make : Godrej, lifetime, Hettich or equivalent
S & F stainless steel handles of size 100 mm fancy type of approved make complete all as specified & directed
S & F in repair kitchen sinks made of stainless steel sheet 18 guageof Grade SS-304 incl plug, washer, brass sink coupling, waste pipe, bowl size 410x330x160mm and overall size 495mmx420mm fixed in kitchen complete all as specified and directed.
Taking up or down 15mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed
Taking up or down 20 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed by Engr-in-Charge
S&F 15 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Charge
S&F 20 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Charge
Fixing only after cleaning 15 mm dia steel water tubing galvanized medium grade concealed in all type wall with and incl all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Charge
Fixing only after cleaning 20 mm dia steel water tubing, galvanized, medium gradeconcealed in all type wall with and incl all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Charge
S&F bib taps 15mm bore long body cast coper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union complete all as specified and directed.
S&F bib taps 15mm bore short body cast coper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union complete all as specified and directed.
S&F bib taps 15mm bore swan neck cast coper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union for kitchen complete all as specified and directed.
S&F pillar taps 15mm bore swan neck cast coper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union complete all as specified and directed.
S&F brass CP towel rail 20mm dia, D type 60 cm long complete all as specified and directed.
S&F double Soap dish, CP brass 'R' type fixed to plugs with chromium plated brass screws complete all as specified and directed.
S&F Brass chromium plated shower rose 125mm x 125 mm size with or without swivel joints, any size, including fixint to steel pipe or union complete all as specified and directed. Make : Nebko Cera or Jaquar
S & F 15 mm dia Angle valve, cast copper alloy chromium plated , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed.
S&F 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed.
S&F 20mm bore gate valve gun metal screwed down high pressure with iron wheel head screwed both ends for iron pipe or for union complete all as specified and directed.
S & F wall mixer CP hot & cold, 15mm bore with L-bend pipe for connection to overhead shower, bright finish with three joints screwed the ends for iron pipe and plugging complete all as specified and directed.
S & F 250 mm Corner Glass shelf with brass brackets complete all as specified and directed.
S&F vitrous china squatting pan of size 580 x 440 mm (Orrisa pattern), white with integral foot rest (excluding flushing cistern & flush pipe) including antisyphonage pipe complete all as specified.
S&F PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed .
S&F vitreous china wash hand basin white flat back size 550 x400 mm excluding taps, waste, chain & plug and porcelene stopper but including brackets /fastners, cutting for and pinning in ends of brackets but exclusive of fixing of supply and waste pipe complete all as specified and directed.
S&F vitreous china wash down water closet pan (pedestal pattern) white including connections to drain ( or outgoing pipe) and to flushing pipe anti sypohonage pipe etc & with plastic WC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinges device complete all as specified and directed.
S&F Reinforced concrete pipes, class NP2 150 mm, laid and jointed complete with collars complete all as specified and directed.
M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate in bedding to drain pipes, including packing under and haunching against the sides of pipes after they are laid and tested complete for 150 mm bore pipe all as specified and directed by Engineer-in-Charge.
Cutting into existing manholes for connecting new drain making food to pipe and rendering cutting out existing benching for and forming branch chanel (1/2 round or 3/4 setion)in cement concrete (1:2:4) typeB1 smooth finished and reforming benching as required dia 150mm.
M & L for cement concrete ( 1:2:4 ) type B1 using 20 mm graded stone aggregate as in surface channels and drains and benching including finishing the top of benching even and smooth using extra cement Note : Forming fair finished channel for drain using extra cement will be measured and paid for separately.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc
S& F 32 mm bore PVC waste pipe 75 mm long of approved make complete all as specified and directed.
M&L for soakage well incl excavation in ordinary soil, foundation in PCC 1:3:6 wells of honey combed and solid in M-25 concrete, including intercepting chamber, screen chamber brick work in cm, 75mm thick stone slab/RR masonary/filling with brick bats, complete of size 1.8 mtr dia and 3.00m deep all as specified and shown on drawing of CEJZ complete all as specified and directed.
S&F fancy type CP Health faucet 15 mm bore (ISI marked) including extension Pipe of 1 Mtr Long complete all as specified and as directed.
S&F brass CP toilet paper holder with flap complete all as specified and as directed.
S&F vitreous china bowl urinal flat back size of 465X355X265mm white(minimum) with grating and urinal for discharge pipe, 25mm dia PVC waste pipe with necessary fixing arrangements complete all as specified and as directed.
Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and removal all rubbish material outside of MD Land complete all as specified and directed.
M&L for brick work with sub-class 'B' bricks (ols size), straight or curved on plan exc 6m mean radius built in In cement mortar 1:4 complete all as specified and directed
M & L brick work in half brick thick wall using Subclass B bricks built in cement mortar 1:6 complete all as specified and directed.
M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed.
Dismantling of 75mm bore cast iron soil/waste pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches, if required complete all as specified and directed. Note : The length shall be measured along the centre line including fittings and accessories).
Dismantling of 100mm bore cast iron soil/ waste pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches, if required complete all as specified and directed. Note : The length shall be measured along the centre line including fittings and accessories).
Dismantling of 75mm bore AC soil/ waste pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches, if required complete all as specified and directed.
Dismantling of 100mm bore AC soil/ waste pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches, if required complete all as specified and directed. Note For item No. 8 & 9. The length shall be measured along the centre line including fittings and accessories).
S&F 110 mm UPVC sewage disposal pipe water pipes single socketed (type A conforming to IS-13592) in any length with rubber ring joints laid in trenches or floors complete all as specified & directed.
S&F 110 mm UPVC ventilation and rain water pipes single socketed (type B conforming to IS-13592) in any length with rubber ring joints fixed to wallls complete all as specified & directed.
S&F 75mm UPVC sewage disposal pipe single socketed (type A conforming to IS-13592) in any length with rubber ring joints laid in trenches or floors complete all as specified & directed.
S&F 75mm UPVC ventilation and rain water pipes single socketed (type B conforming to IS-13592) in any length with rubber ring joints fixed to wallls complete all as specified & directed.
S&F 110 mm dia PVC (SWR) junction single (Single Tee with access door) equal or unequal complete all as specified & directed.
S&F 110 mm dia PVC (SWR) bends any radius with access door complete all as specified & directed.
S&F 75mm dia PVC (SWR) junction single (Single Tee with access door) equal or unequal complete all as specified & directed.
S&F 75mm dia PVC (SWR) bends any radius complete all as specified & directed.
S&F 75mm dia PVC (SWR) branch piece, double (double y) complete all as specified & directed.
S&F 110 mm PVC (SWR) vent cowl complete all as specified & directed.
S&F PVC (SWR) 75 mm dia of outlet nahani trap/floor trap with grating including jointing with solvent cement complete all as specified & directed.
S& F Salt glazed stoneware gully traps of size 150x150 , square or round mouthed, type‘P’ complete all as specified & directed.
S & F CP Grating doom 100 mm dia with waste hole complete all as specified & directed.
S & F CP Grating doom 100 mm dia complete all as specified & directed.
Dismantling of PVC Water tank up to cap 500 Lts & removal of all retrieved material complete all as specified & directed.
S&F 500 litres, rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top), two layered, hoisted and fixed in position complete all as specified in SSR Part I complete all as specified & directed.
S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge.
Taking down shutter of any description exc. 1 sqm but n.exc 2 sqm each and Refixing in same position including Resecuring or easing & adjusting complete all as specified and directed by Engineer-in-Charge.
Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed.
Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed.
Taking down shutter of any description exc. 1 sqm but n.exc 2 sqm each and removing from site complete all as specified and directed. .
S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube of 1.25 mm thickness suppling & fixing in opening as per specification & drawing. Make - Rajshri, Sintex
S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
S & F 35mm thick flush shutters solid core construction with block board and plywood face panels, fixed with approved adhessive incl lipping all round the edges of door as per manufacturers instructions complete all as specified & directed.
M&L for decorative laminate type 1, 0.9 mm thick colour and pattern as approved fixed as in door shutters complete all as specified & directed.
S & F 35mm thick second class hardwood factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc divided into square , with plain, chamfered or rounded, mitred and rebated sash bars any numbers , fitted with cut and mitred beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed. Note :- S & F Glass/gauge shall be measured and paid for separately
S & F 35mm thick factory made plain, framed, paneled door shutters kiln seasoned and chemically pressure treated second class, hardwood (two panels) with lock rail and panel of 9mm thick BWP commercial marine grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive confirming to IS-710. The size of rails and style shall be as per IS-1003.
S & F 35mm thick factory made partly gauzed and partly panelled skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed. Note :- S & F Glass/gauge shall be measured and paid for separately
Supply only stainless steel wire cloth, 0.56 mm nominal dia of wire & average width of aperture 1.18mm & fixed to wodden door shutters complete all as specified & directed.
S&F aluminium mesh of wieght exc.0.55 Kg/Sqm as support to SS wire cloth complete all as specified & directed.
S &F Framed work such as door frame, grills, gratings, etc., with ends of bar shoulder &/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks with Angle, MS sheet Flat iron & similar work conforming to Fe 290 GDE -E-165 (Ladders, door frames and cooler stand etc) complete all as specified & directed.
S & F MS butt hinges 100mm size cold rolled medium weight and fixed as directed and specified.
S & F 250 mm long SS sliding door bolt with hasp, staple (bolt type) not less than 12 mm dia with & minimum of 6 bolts & nuts , 4 on bolt plate & 2 on staple plate.
S & F SS handles cast moulded type 150mm size fixed with screws complete all as specified & directed.
S & F SS barrel tower bolts not less than 12 mm dia of extruded section, 200mm long as specified.
S & F 75 mm long door stopper of stainless steel body with two number rubber shoes complete all as specified & directed.
S & F MS Helical door spring150mm long including roller and roller plate complete fixed to angle iron chowkats complete all as specified & directed.
S & F in repair pressed steel factory made cupboard shutter with frame of 1.25 mm thick and shutter 1 mm thick PBI sheet with 6 nos 3.15 mm thick and 100 mm long steel hinges godrej patern locking arrangement incl 12 mm dia verticak rod incl spray painting in factory in wood finish pattern or as directed.
S & F Powder coated anodised aluminium window and ventilator shutters glazed type , aluminium section weighing 0.55 kg/m incl necessary joining cleats (like tower bolt, butt hinges and handle etc as per reqd specification) and rubber packing anodised aluminium snap beading screws etc complete all as specified plain sheet glass measured & paid separately.
S & F Powder coated anodised aluminium window and ventilator shutters openable with sash bar, aluminium section weighing 0.55 kg/m incl necessary joining cleats (like tower bolt, butt hinges and handle etc as per reqd specification) and rubber packing anodised aluminium snap beading screws etc complete all as specified ( Sash bar & wire mesh measured & paid separatelty.
S&F, powder coated aluminium frame for doors, windows, ventilators, partitions etc with one or more rebates including joining cleat for fixing etc. complete all as specified (minimum thickness of powder coating not less than 50 micron).
S&F Powder coated (thickness not less than 50 micron) aluminum grill 6-8 mm thick of approved design aperture size 50mmx50mm of standard sections including F type aluminium snap beading screw complete fitted to aluminium frame section complete all as specified and directed. Note: Aluminium frame shall be measured separately
S&F 4 mm thick plain sheet glass ordinary quality in squares exc 0.50 sqm in each pane and glazing with aluminium beading complete all as specified.
S&F in repair 25 mm dia SS drapery rod grade 304 medium weight all as specified and as directed.
S&F SS -304 grade brackets/ end brackets for holding drapery rod all as specified and as directed.
S&F SS Finials suitable for 25mm dia SS 304 grade drapery rod as approved complete all as specified & directed.
M&L preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-Charge.
M&L preparation old decoraeted steel surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of old painted wooden or wood based surfaces of any description n.exc 10 cm in width or girth when unconnected with other painting or when painted in a diferent tint and applying one coat of synthetic enamel paint complete all as specified and directed.
M & L for WPT in sunken floors as described here under:- Sunken floor and sides up to finished floor level shall be plastered with 15 mm thick cement plaster in CM 1:4 mixed with water proofing liquid @ 150 ml per bag of cement . (ii) Preparing plastered surfaces and providing APP polymeric water proofing membrane , minimum 3 mm thick and weighing not less than 3.0 kg/ sqm of make super thermolay manufactured by STP ltd or Hyper Plas (Polyster) manufactured by M/S IWL Ltd or 'Shatiplas' (Polyster) manufactured by M/S Capital Steels and chemicals Pvt Ltd as approved by GE, black finish reinforced with non-woven polyster matt, with a thermo fusable finish laid over compatible bitumen primer (Bitumen primer shall be TANK MASTIC of M/S STP Ltd or EMW Flate' of M/S Texas India Ltd) at the rate of 0.40 Ltr/Sqm torching overlaps with a propane or a butane gas torch , with a over lap of 75mm at the sides and 100mm at the ends sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer's instructions including preparation of surface and filling lime concrete 1:5:10 type E2 with brick bats complete all as specified an as directed Note :- (i) Polymeric membrane shall be laid in sunken floor and on sides up to finished floor level. (ii) The waterproofing treatment shall be got carried out by the manufacturer or their authorised applicators. (iii) Above aspects are deemed to be included in quoted rate. (iv) Supply only water proofing liquid shall be measured and paid seperately Note : Slab area only will be measured for payment purpose.
M&L for preparing newly plastered surfaces and applying two coats of distemper with distemper oil emulsion white or tinted by mechanical means over a coat of primer over 1 mm thick of wall care putty to make smooth the undulated surfaces complete all as specified and directed. (Make : For wall putty- Birla white/Bison wall putty of Berger/Narolac wall putty/Asian paint powder putty /Acro wall guard.)
M&L for complete removal of existing treatment on walls, including cleaning of any mortar drops, fungus efflorescent salts etc and preparation of old plastered surfaces and applying two coats of distemper with distemper oil emulsion white or tinted by mechanical means over a coat of primer over two coat of wall care putty to make smooth the undulated surfaces complete all as specified and directed. (Make : For wall putty- Birla white/Bison wall putty of Berger/Narolac wall putty/Asian paint powder putty /Acro wall guard.)
M&Lfor Preparation of new plastered surfaces of walls and applying two coats of Exterior emulsion paint over a coat of 1 mm thick wall care putty with hand roller complete all as specified.
M & L preparing new plastered surfaces and applying two coats of cement base paint on wall
M&L for complete removal of exiting surface & thourughly wetted surface to ensure better sticking including sand paper gentle rubbing to obtain smmoth surfaces, including all necessary arrangement for execution of work and applying two coats of exterior emulsion paint using hand roller of over one coat of wall care putty for external wall, complete all as specified and as directed by Engineer-in-Charge.
M & L for preparation of old plastered surfaces of walls & applying two coats of white wash by mechanical means complete as spd & directed
M & L for preparation of newly plastered surfaces & applying three coats of white wash by mechanical means on ceilings complete as spd & directed
M & L Complete removal of existing treatment of old plastered surfaces of ceilling and Washing, rubbing down and stopping of painted surfaces & applying two coats of white wash by mechanical means complete all as spd & directed
M&L Providing, cement concrete PCC 1 1:2:4 type B1 (using 20 mm graded stone aggregate )on lintels up to 1.5m clear span, bed plates,coping, kerbs water trough & the like including weathering, slightly rounded or chamfered angles & throating, as directed
Taking down existing water proofing roof treatment including PCC in roof covering padding, kerbs, roof kerbs of average thickness 100 mm all description complete all as specified and directed.
M&L for surface preparation by removal of all loose particle to ensure clean, smooth and dry surface and laying 30mm thick PCC type B-0,( 1.2.4) using 12.5 mm graded stone aggregate finished even & smooth without using extra cement to cover negative slope into prop complete all as specified & directed.
M&L rendering 10mm thick in cement mortar (1:3) on concrete surfaces to receive water proofing treatment finished even and fair with WPC @ 3% weight of cement measured & paid separately. complete all as specified. Note : WPC Shall be measured and paid seperately
Supply only integral water proofing compund complete all as specified & directed.
Supplying & applying fiber reinforced UV resistant elastomeric liquid water proofing and heat reflective coating with acrilic polymers and polyester /glass fibre with roller both direction with a gap of 12 hrs @ 1 kg/sqm over a primer coat after scraping and properly cleaning the surface to remove loose particles with wire brushes complete all as specified and directed by engineer In-charge per manufacturure instructions and by an authorised applicators carefully (Make:- Asian Paint, STP LTD-Shalicry MHI, M/S Sika Cool Coat or equivalent as approved by GE
M&L for making v groove of crack surface and filling with PU & cement cement (1:1.5) by volume grouting by nozzle as per manufacturer instruction complete all as specified & directed.
M & L for 75mm thick PCC 1:3:6, type C-2 using 40 mm graded stone aggregate as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed .
M&L for precast concrete kerb stones of cement concrete type C1 1:3:6 (using 20mm graded stone aggregate) solid blocks, exc 10 cm in width and setting in cement mortar 1:4 complete all as specified and as directed.
S & F in repair Plate rack of size 750mmx600mmx250mm fabricated out of 1mm th stainless steel sheet fixed in repair complete all as specified and directed.
Dismantling/ chipping of unsound weak/ loose & cracked concrete/ cement plaster as in soffits of chajjas, ceillings , roof projections upto double storey buildgs including cleaning existing reinforcement, applying approved rust remover, removing rusted steel bars if necessary , apply Epoxy resin concrete bonding (Sikadur-32LP @ 0.4 Kg/Sqm) coat on prepared RCC surfaces as per manufacturers instructionbonding agent to old concrete/ plaster surface to revieve PMR (polymer modified ready to use cementitious mortar)
M & L for 15mm thick polymer mortar to load carrying RCC members in two layers in proportion of 1:5:15 by weight of polymer of approved make and quality, cement and quartz sand with required WC ratio for desired consistency and applying and finishing by floating, curing after initial setting time etc. as per manufacturer specification etc. complete all as directed and specified.
M & L for 30mm thick polymer mortar to load carrying RCC members in two layers in proportion of 1:5:15 by weight of polymer of approved make and quality, cement and quartz sand with required WC ratio for desired consistency and applying and finishing by floating, curing after initial setting time etc. as per manufacturer specification etc. complete all as directed and specified.
S&F MS TMT bars 6 mm to 8 mm dia cut to length bent to shape reqd incl cranking, bending spirally for hooping for cols, hooking ends and binding with steel MS wire (annealed) not less than 0.9 mm dia complete all as directed and specified.
S&F TMT bar 10 mm dia & over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire ( annealed) not less than 0.9 mm dia complete all as directed and specified.
M&L for formwork to sides and soffits of suspended slabs such as roof slab, floor slabs landing horizontal or slopping and similar works thikness n.exc 200mm including neccesarry sufficient supports for flat and rough finished surfaces of concrete etc complete all as specified and directed by Engineer-in-Charge.
M&L form work to chullah hoods, chajjas, troughs and similar items including edges finish with finish flat surface complete all as specified and directed by Engineer-in-Charge.
M&L Formwork to sides of pillars, posts, struts, piers,columns, and stanchions, etc finish with rough finish flat surface complete all as specified and directed by Engineer-in-Charge.
M& L for From work to lintel beam etc complete all as specified & directed
M&L for nominal mix RCC 1:1.5:3 Tpe A1 (20 mm graded stone aggregate ) as in slabs supported on walls ,lintel beam ,beams & coloumns in floors , roofs, balconies ,Chhaja etc.complete all as specified & directed. Note :- Reinforcement shall be measured and paid for separately.
M&L for precast RCC 1:2:4 type B1 using 20 mm graded stone aggregate for manhole cover including placing & set in CM 1:6 all as specified Including demolition of old RCC manhole covers complete all as directed and specified. Note :- Reinforcement shall be measured and paid for separately.
Dismantling plain or corrugated steel / FRP sheeting any gauge, thickness including nainital or similar pattern roof /wall covering complete all as specified and directed by Engineer-in-Charge.
Dismantling wrought iron or mild steel work of any description nototherwise provided for complete all as specified and directed by Engineer-in-Charge.
S&F rolled mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections,ms pipe) including distance pieces, cleats etc. conforming to Fe-410W Gde E-250 quality 'A' all as specified .
M&L for mild steel work as in wind ties for roof covering including securing bolts etc. including all necessary drilling, bolting or riveting etc and similar work conforming to Fe 290 Gde E-165 all as specified and directed by Engineer-in-Charge.
S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410W Gde E-250 quality 'A' all as specified and directed by EIC.
M & L Steel work in tabular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 complete all as specified and directed by Engineer-in-Charge.
S&F anchoring bolt 12 mm with holdfastiening arrangement up to 150mm in stone/brick masonary complete all as speciffied and directed
S&F pre painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and washers as specified.
Demolition stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in cement mortar
M&L for broken stone or boulders in hardcore of gauge exc 63 mm but exc 100 mm deposited spread and levelled in layers n. exc 15 cm thick watered and rolled/rammed to a true surface complete all as specified all as specified and directed
M&L for 100 mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base complete all as specified and as directed.
M&L Machine pressed precast concrete rubber moulded coloured interlocking paver block any shape and size confirming to IS 15658 - 2006 of 60 mm thickness, M-35 Grade in floors/path/parking over and including 25 mm thick sand cushioning complete all as specified and as directed.
S & F for Four Kitchen Duct Pipelines for Waste Water Pipe, Domestic Water Pipes and Riser supply downtake pipes fixing done with Pipe Supporting Clamping System having Profile Bracket + Slotted C Channel + U Bolt R/M System - 1. Waste Water Pipe 2 1/2" PVC, 2. Water Supply Down take lines 1/2" GI - 2 nos. and 3. Riser Supply Downtake pipelines 3/4" GI - 2 nos. running from Terrace to Ground Floor Vertical Fixed line with wall distance 3": Pipe Support Clamping made of 1. Profile Bracket Type A2 (Wall Distance 3") of Low Carbon Hot Roll Gauge Corrected (HRGC) Mild Steel with ribs and notch are Hot Dip + Zn Al flake coated with flange bolt and flange nut are Zn Al Flake coated. 2. Slotted "C" Channel B3 Type to be used of size 24" of Low Carbon Continuous Slotted C Channel with ribs made of Low Carbon Hot Roll Gauge Corrected (HRGC) steel are Hot Dip + Zn Al flake coated with material thickness of 3mm. 3. U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing transparent ribbed silicon rubber sleeve; with flange nut set having natural serration - Zn Al flake coated. Material Qty.: 1. Profile Bracket of A2 Type (Wall distance 3") - 2 Nos. 2. Slotted C Channel of B3 Type Size 15" - 1 No.; 3. U Bolt R/M for 2 1/2" PVC Pipe Dia. - 1 No.; 3/4" GI pipe Dia. - 2 nos.; 1/2" GI pipe Dia. - 2 nos and 4. Justi Khilla 2 1/2" - 4 nos. Pipe Support Clamping Unit fixing to be done at every metre distance in the duct as specified in the Technical Drawing. Refer CE Jaipur Zone Technical Drawing no. TD/2022/01. Make : Shaivi
S & F of Four Toilet Duct Pipelines for Soil Water Down take pipe and Water Supply Down take pipe fixing done with Pipe Supporting Clamping System having Profile Bracket + Slotted C Channel + U Bolt System - 1. Soil Water Pipe 4" PVC - 1 pipe and 2. Water Supply Down take GI pipes 3/4" 2 nos. running from Terrace to Ground Floor Vertical Fixed line with wall distance 3": Pipe Support Clamping made of 1. Profile Bracket Type A2 (Wall Distance 3") of Low Carbon Hot Roll Gauge Corrected (HRGC) Mild Steel with ribs and notch are Hot Dip + Zn Al flake coated with flange bolt and flange nut are Zn Al Flake coated. 2. Slotted "C" Channel B3 Type to be used of size 18" of Low Carbon Continuous Slotted C Channel with ribs made of Low Carbon Hot Roll Gauge Corrected (HRGC) steel are Hot Dip + Zn Al flake coated with material thickness of 3mm. 3. U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing transparent ribbed silicon rubber sleeve; with flange nut set having natural serration - Zn Al flake coated. Material Qty.: 1. Profile Bracket of A2 Type (Wall distance 3") - 2 Nos. 2. Slotted C Channel of B3 Type Size 18" - 1 No.; 3. U Bolt R/M for 4" PVC Pipe Dia. - 1 No.; 3/4" GI pipe Dia. - 2 nos and 4. Justi Khilla 2 1/2" - 4 nos. Pipe Support Clamping Unit fixing to be done at every metre distance in the duct as specified in the Technical Drawing. Refer CE Jaipur Zone Technical Drawing no. TD/2022/01. Make : Shaivi
Excavation over areas not exc 1.5m deep and getting in soft/loose soil complete all as specified and as directed.
Excavating over areas exceeding 1.5 m & not exceeding 3m deep and getting out in soft / loose soil complete all as specified and as directed.
M&L for PCC 1:2:4 type B2 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified & directed.
S & F in repair 5000 Ltrs capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe pipe etc complete all as specified in SSR Part-I and directed
S&F 50mm bore gate valve gun metal screwed down high pressure with iron wheel head screwed both ends for iron pipe or for union complete all as specified and directed.
S&F 50mm dia GI tubing, heavy grade, with all necessary fittings, fixed to walls and ceiling or laid in floor complete all as specified and directed.
E/M Portion Taking down carefully surface aluminum /copper point wiring, casing capping /PVC concealed conduit for (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling rose, regulators, sockets, light fittings etc and making good disturbed surfaces complete all as specified and directed.
M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 Sqmm (Phase-Red, Neutral-Black) and earth continuity conductor 1.5 Sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings/fixing accessories and unwelded sunken galvanised pressed steel terminal boxes of thickness not less than 1.0 mm covered with 3 mm thick phenoic laminated white sheet cover for mounting switches, scokets, fan regulators as required for one light point controlled by one switch complete all as specified and as directed
,---ditto--- all as per item No. 181 above but for one fan point controlled by one switch and regulator complete all as specified and as directed
,---ditto--- all as per item No. 181 above but for one socket outlet 6 amp controlled by one switch on the same board with other switches complete all as specified and directed.
,---ditto--- all as per item No. 181 above but for one socket outlet 6 amp controlled by one switch on indepdendent board complete all as specified and directed.
M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 4.0 Sqmm (Phase-Red, Neutral-Black) and earth continuity conductor 4.0 Sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings/fixing accessories and unwelded sunken galvanised pressed steel terminal boxes of thickness not less than 1.0 mm covered with 3 mm thick phenoic laminated white sheet cover for mounting switches, sockets as required for one 3 pin 16 Amps socket outlet point controlled by one switch on independent board complete all as specified and as directed
S&F socket outlet, 2-in-1, 3 pin 6 Amps flush type complete all as specified and directed.
S&F switch piano flush button single pole one way 6 Amp complete all as specified and as directed
S&F switch piano flush button single pole one way 16 Amp complete all as specified and directed.
S&F socket outlet, 2-in-1, 3 pin 6 & 16 Amps flush type complete all as specified and directed.
S&F ceiling rose 3 plates polycarbonate body complete all as specified and as directed
S&F hum free electronic step fan regulator 120-280 volts of 100 watts capacity (socket type) including connecting up complete all as specified and directed.
S&F LED batten (1.2M) made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficiency of 105 lumen per watt and total power consumption not more than 20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a colour temperature of 6500K, CRI>80, THD<10% and PF>0.95 complete all as specified and directed. Make - Philips Cat ref No. ENDURALED BATTEN "BN 308C LED20S PSU CDL WH, Bajaj cat ref No. BLTRU 20W WH VIVA or Havells Cat No. 600BS20WLED840SPCWH as approved by GE.
S&F LED batten (0.6m) made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 900 lumens at a minimum system efficiency of 115 lumen per watt and total power consumption not more than 10 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a colour temperature of 6500K, CRI>80, THD<10% and PF>0.95 complete all as specified and directed.
M&L for earthing with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of steel bolts, nuts, check nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I connected to earthing point and testing on completion with and including 15 mm bore light grade G.I. protection pipe (upto 7.5 metre beyond outer edge of earth pit) making PCC pit of size 0.3m X 0.3m X 0.3m (inner size) in mix 1:3:6 type C1, 40 mm thick cover reinforced with 6 mm dia M.S bars, 3 nos both ways with lifting hook made out of 8 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore light grade G.I. watering pipe, common salt and charcoal filling, including necessary excavation and earth work and testing on completion to achieve value not more than 2.0 ohm complete all as specified and directed.
Taking down MCB distribution boards with incoming and outgoing controls any make any capacity after disconnecting all connections complete all as specified and directed.
S&F MCBs Distribution board SPN, 12 ways powder coated, CRCA steel sheet, IP-43, IK09, with reversible double door, 415V, recess mounted having insulated 100 amp tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, blanking plate in unused spaces as required, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed.
S&F MCBs Distribution board TPN 8 ways, powder coated, CRCA steel sheet, IP-43, IK09 with reversible double door, 415V, recess mounted having insulated 200 amp tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, blanking plate in unused spaces as required, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed.
S&F MCBs of 'B' curve single pole 6 to 32 Amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed.
S&F MCBs of 'B' curve double pole 40 to 63 Amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed.
S&F in repair LED bulk head light fitting 9/10 watt IP 66 & IK 09 with polycarbonate body with LED driver duly prewired connection with 0.75sqmm PVC insulated & sheathed three core flexible multi stranded copper conductor cable complete all as specified & directed.
Supply and fixing ceiling fan 1200mm sweep 50 Hz AC 230 votls, 5 star rated in white colour with BLDC fan motor, blade set, 0.45 mtr down rod, canopy set, rubber reel including 0.5 Sqmm three core PVC insulated flexible copper conductor multistranded wire from fan motor to ceiling and writing MES No. on fan body as required complete all as specified and directed.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m and three core 0.75sqmm copper cable connection complete all as specified & directed.
S&F water heater 25 litre capacity BEE star rating 5 in approved colour, heating element 2.0 KW, adjustable temperature setting knob for temperature setting between 25° C to 75° C, outer tank made of metal, inner tank made of extra thick superior cold rolled steel provided with high density PUF insullation complete all as specified and directed.
M&L for sand cushioning to cable with dry fine sand in trenches 8 cm below the cable and 15 cm above the cable after laying complete all as specified and directed by the Engr-in-Charge Note : punned thickness shall be measured for payment.
Supplying and laying unreinforced precast concrete cable cover, class LV, Type I flat, size 250mm X 150mm X 40mm complete all as specfied and directed .
Dismantling and taking out UG cable any size and fixed in any position and removal from site complete all as specified and directed.
Supply, laying, jointing, testing & commissioning LT under ground cable XLPE insulated, screened PVC bedded, galvanised steel strips or wire armoured, heavy duty with multi stranded aluminium conductor, 1100 volts grade (ISI marked) laid in trenches, ducts, pipes or fixed on poles of size 16 Sqmm 2 core including all necessary clamps, nut, bolt washers complete all as specfied and directed .
S & F 20amp, single pole and neutral socket outlet, with 2 pole and earth metal enclosed plug top in powder coated CRCA steel sheet enclosre recess mounted with chained matel cover for socket out let with and incl one single pole B curve MCB 20 to 25 Amps complete all as specified and directed.
M&L for clamp and back plates fabricated from steel sections conforming to Gde Fe-410-0 or Fe-310-0 incl nut, bolt and washer , drilling holes for bolts I any shape or size for fixing ceiling fan complete all as specfied and directed .
Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store complete all as specfied and directed .
Rewinding the motor of ceiling fan 1200/1400 mm of any type and make with super enamelled copper wire of existing gauge of approved quality including overhauling and minor repairs for satisfactory operation, testing for the original speed & consumption complete all as specfied and directed .
Renewal of ball bearing of ceiling / exhaust fan of any size and make as required with alignment of shaft and testing complete all as specfied and directed .
Renewal of AC film capacitor 2.5 mfd, 440 volts suitable for any type ceiling fan in FR plastic casing including connection complete.
Renewal of shaft of approved quality for ceiling fan / exhaust fan any make any type & size as required complete all as specified and directed.
M&L for painting of ceiling fan of any sweep and make with one or more coats of spray painting with best quality enamel paint of required colour and approved brand to give an even shade and polishing with rubbing compound and wax polish including cleaning of surface with detergent etc complete all as specified and directed.
Renewal of rubber reel with a pair of clamp, nuts, bolts, split pins etc suitable for ceiling fan down rods of any size and make as required complete all as specified and directed.
Renewal of PVC canopy suitable for ceiling fan of any size and make as required complete all as specified and directed.
Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.
Supply and fixing post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete.
M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and modular sunken GI metal boxes not less than 1.0mm thick and incl white modular cover plates with frame for mounting modular switches, sockets, fan regulators etc for one light point controlled by one switch complete all as specified and directed.
,---ditto--- all as per item No. 220 here-in-before but for one fan point controlled by one switch and regulator complete all as specified and directed.
,---ditto--- all as per item No. 220 here-in-before but for one socket outlet 6 amp controlled by one switch on the same board with other switches complete all as specified and directed.
M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 4 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 4sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and modular sunken GI metal boxes not less than 1.0mm thick and incl white modular mounting cover plates with frame for mounting modular switches, sockets, fan regulators etc for 3 pin 16 amps socket outlet point controlled by one switch on independent board complete all as specified and directed.
S&F switch modular 1 way 6 Amps, 230 volts, 1 module complete all as specified and directed.
S&F modular switch 1 way 16 Amps, 230 volts, 1 module complete all as specified and directed.
S&F modular socket 6/16 Amps, 2/3pin combined 2 module AC 230 volts complete all as specified and directed.
S&F modular socket 6 Amps, 2/3 pin combined 2 module AC 230 volts complete all as specified and directed.
M&L for sub main wiring with two run of 6 Sqmm PVC insulated FRLS multistranded copper conductor cable alongwith one run of 6 Sqmm earth wire as earth continuity conductor (Phase-Red, Neutral-Black, Earth-Green) drawing into and including concealed rigid non mettalic PVC conduit of size 25mm, medium grade, ISI marked ivory colour alongwith accessories of suitable size including making connection as required and making good the disturbed portion complete all as specified and directed. NOTE - Two run of 6 sqmm phase and neutral wire & One run of 6 sqmm earth wire & One run of PVC conduit with accessories shall be measured as One length.
S&F exhaust fan, high speed, steel body 300mm sweep, 1200 RPM, four blade, heavy duty motor, copper wound double ball bearings, grey colour with louver, nuts, bolts and washers and three core 0.75sqmm copper cable connection with protective steel bird guard complete all as specified & directed.
Supply, laying, jointing, testing & commissioning LT under ground cable XLPE insulated, screened PVC bedded, galvanised steel strips or wire armoured, heavy duty with multi stranded aluminium conductor, 1100 volts grade (ISI marked) laid in trenches, ducts, pipes or fixed on poles of size 16 Sqmm 2 core including all necessary clamps, nut, bolt washers complete all as specfied and directed .
S&F MCBs Distribution board SPN, 8 ways powder coated, CRCA steel sheet, IP-43, IK09, with reversible double door, 415V, recess mounted having insulated 100 amp tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, blanking plate in unused spaces as required, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed.
Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ
Shree Karni Electrovision
PUSHPA G ENTERPRISES
Satish kumar and company
ANKIT BUILDERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .