Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹32.1 LAccepted-AOC WARD NO 18 NEAR NOORI MASJID DHANPURI DISTT SHAHDOL MP PIN 484114 | DHANPURI | SHAHDOL | MADHYA PRADESH | 484114 | ₹32.1 L | L-1 | Accepted-AOC The bidder is the L-1 bidder |
| 2 | L-2₹32.4 L+₹27,315.97 (0.85%)Rejected-Finance WARD NO 1 BIJURI MADHYA PRADESH 484 440 | ANUPPUR | MADHYA PRADESH | 484440 | ₹32.4 L+₹27,315.97 (0.85%) | L-2 | Rejected-Finance The bidder is not the L-1 bidder |
| 3 | L-3₹38.0 L+₹5.9 L (18.3%)Rejected-Finance 00 HANSH NAGAR RADHA RAMAN ROAD MAINPURI MAINPURI UTTAR PRADESH 205001 | MAINPURI | UTTAR PRADESH | 205001 | ₹38.0 L+₹5.9 L (18.3%) | L-3 | Rejected-Finance The bidder is not the L-1 bidder |
| 4 | L-4₹38.7 L+₹6.5 L (20.4%)Rejected-Finance HOUSE NO 231 DHANPURI NO 3 WARD NO 04 CHOTI AMLAI DISTT SHAHDOL M P 484114 | SHAHDOL | MADHYA PRADESH | 484114 | ₹38.7 L+₹6.5 L (20.4%) | L-4 | Rejected-Finance The bidder is not the L-1 bidder |
| 5 | L-5₹39.4 L+₹7.3 L (22.6%)Rejected-Finance WARD NO 09 L C H COLONY KHONGAPANI MANENDRAGARH DISTT KOREA C G 497447 | MANENDRAGARH | KOREA | CHHATTISGARH | 497447 | ₹39.4 L+₹7.3 L (22.6%) | L-5 | Rejected-Finance The bidder is not the L-1 bidder |
Tender Value
₹53.6 L
EMD Value
₹67,000
Closing Date
28 Mar 2026, 5:00 pmClosed
Staff Officer Civil SECL Sohagpur Area
Office of Staff Officer Civil SECL Sohagpur Area, GM Office, Dhanpuri, Distt. Shahdol , M.P. 484114
Providing wind breaking barrier with steel structure around new stock yard along with some part of old stock yard periphery at Sharda OCP under Burhar Sharda Sub Area
2026_SECL_355954_1
SECL/SGP/SO(C)/ e-TENDER/2025-26/87 dt. 08.03.2026
Open Tender
Civil Works - Others
Percentage
60 days
Sohagpur Area
As Per Nit
5 documents required · 5 mandatory
₹67,000
10 Sept 2026
12 Mar 2026
30 Mar 2026
12 Mar 2026
28 Mar 2026
13 Mar 2026
12 Mar 2026 - 21 Mar 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Item Description/ Heading | |||||
| 1.01 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. | 165.82 | Cum | 219.38 | ₹36,377.59 |
| 1.02 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-Ill) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | 13.82 | Cum | 4,667.29 | ₹64,501.95 |
| 1.03 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 120.46 | Cum | 5,667.37 | ₹6,82,691.39 |
| 1.04 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 21,523.83 | Kg | 93.98 | ₹20,22,809.54 |
| 1.05 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 2,092 | Sqm | 601.52 | ₹12,58,379.84 |
| 1.06 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work | 1,145.4 | Sqm | 105 | ₹1,20,267 |
| 1.07 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | 99.49 | Cum | 186.46 | ₹18,550.91 |
| 1.08 | Extra for providing and fixing wind ties of 40x 6 mm flat iron section. | 1,500 | Metre | 158.9 | ₹2,38,350 |
| 1.09 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. | 6,952 | Kg | 3.5 | ₹24,332 |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.05 MB
Tendernotice_1.pdf
PDF • 2.07 MB
Tendernotice_2.pdf
PDF • 1.30 MB
Tendernotice_3.pdf
PDF • 1.17 MB
BOQ_368804.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .