REPAIR /MAINT OF FLOORING TILING, CHAJJA, INTERLOCKING, CHEQURRED PATH, PLINTH PROTECTION, FALSE CEILING AND SANITARY ITEM IN ZONE-3, 4 and 7 UNDER AGE B/R-I UNDER GE BABINA

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises and complete all as specified and as directed.

M&L, for PCC 1:2:4 type B-0 using 12.5 mm gradesd stone agg as in levelling course of floors of 25 mm thick complete all as specified and directed.

M&L, screed bed or bedding layer of mortar 15 mm thick in cement mortar 1: 6 to receive tiles etc finished rough complete all as specified and directed.

M&L for Vitrified ceramic tiles 8-10mm thick (square/rectangular) polished area of each tile exc 0.18 Sqm but not exceeding 0.36 sqm, in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor etc complete all as specified and directed.

M&L for non skid coloured joint free ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.11sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor etc complete all as specified and as directed.

M&L for non skid coloured joint free ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.18sqm but not exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor etc complete all as specified and as directed.

M&L,Rendering 10mm thick in cement mortar 1: 3 on faces of brick work or concrete surfaces, finished rough to receive tiles etc complete all as specified and directed.

M&L for vitrified ceramic tiles 8-10 mm thick (square / rectangular) polished area of each tile exceeding 0.18 sqm but not exc 0.36 sqm, in Vertical surfaces such as skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor etc etccomplete all as specified and as directed

M&L for non skid coloured joint free ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.11sqm but not exc 0.18 sqm, in vertical surface as skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor etc complete all as specified and as directed.

M&L for non skid coloured joint free ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.18sqm but not exc 0.36 sqm, in vertical surface as skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor etc complete all as specified and as directed.

M&L for joint free glazed coloured tiles 450x350x7mm thick for work on vertical surface, set & jointed in cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed

M&L for 15-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick in CM(1:6) etc complete all as specified and directed.

Demolition of PCC in any description and in any position etc complete all as specified and directed

M & L Machine cut kota stone slab flooring 18-20mm thick over and including 20mm thick cement screed bed in CM 1:6 laid laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed

M & L Machine cut kota stone slab flooring 18-20mm thick in riser of steps,skirting, dado & pillar over and including 10mm thick rendering in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

M&L for 75mm thick cement concrete type C-1, 1:3:6 (20mm graded aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

M&L for 40 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in floor , floor surfaces finished even and smooth without using extra cement complete all as specified and as directed

M &L chequered tiles (Cement) 30cm X 30cm x 25mm set and jointed and pointed in neat cement slurry in floor with grey cement and pigment over & including 20mm thick screed bed in CM (1:6) Complete all as specified and directed.

M&L 60 mm thick machine pressed rubber moulded precast concrete interlocking paver block any shape & size confirming to IS 15658-2006 of M-35 grade with grey cement & pigment complete all as specified and directed.

M&L 60 mm thick machine pressed precast concrete interlocking paver block any shape & size confirming to IS 15658-2006 of M-35 grade with grey cement & no pigment complete all as specified and directed.

M&L PCC 1:4:8 type D2 using 40mm graded stone agg as in filling and mass concrete, Sub base/flooring complete all as specified and directed.

M&L, 50mm thick sand cushioning to under concrete interlocking paver block including watering & consolidation complete all as specified

M&L for PCC 1:2:4 type B0 using 12.5 mm graded stone aggregates as in coping on side of path including necessary use and waste of form work etc complete all as specified and as directed

Demolition of Brickwork of stone/boulder masonry, build in lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articlesl etc complete all as specified and as directed.

M&L brick work with fly ash bricks (FASB) conferming to IS 12894, of strength M-10 straight or curved on plan exc 6m mean radious built cement mortar 1:6 complete (on parapet wall) all as specified and as directed.

M&L for brick work with sub class ‘B’ bricks old size straight or curved on plan exc 6 M radius built in cement mortar (1 : 6) but except Bricks etc complete all as specified and as directed

Taking down cement plaster on brick or stone wall including raking out joints, hocking for key scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 10mm thick on fair faces of wall even and smooth finish without using extra cement on conc/brick surfaces in CM 1:6, complete all as specified and as directed

M&L renderig 5mm thick in cement mortar 1:3 on ceiling surface and finished even and smooth with out using extra cment complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of wall even and smooth finish without using extra cement on conc/brick surfaces in CM 1:4, complete all as specified and as directed

M & L for preparation of new plastered surface and applying three coat of white wash on ceiling complete all as specified and as directed.

M & L for preparation of new plastered surface and applying three coat of white wash on wall complete all as specified and as directed.

M & L for Preparation of new plastered surface of wall and applying two coat of OBD over a coat of putty complet all as specified and as directed.

M & L for preparation of new plastered surface of wall and applying two coats of cement base paint on external wall surface over a coat of alkali resistant primer complete all as specified and as directed.

Taking down chowkhats or frames of any description n exc 1.5 sqm each (without taking off shutters from the frame) complete all as specified and as directed.

Taking down chowkhats or frames of any description exc 1.5 Sqm but n exc 4 sqm each (without taking off shutters from the frame) complete all as specified and as directed.

S&F, locally fabricated 35 mm thick IInd class HW glazed & skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter as specified in SSR Pt I sec 8 Cl 8.24 (a), divided into squares with plain chamfered rounded, mitered and rebated sash bars etc complete all as specified and as directed.

S&F locally fabricated plain framed panelled shutter 35 mm thick IInd class HW (any number & Panels) with lock rail and panel of 9 mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both face, the size of rail and style as per IS : 1003 (Part I) kiln seasoned and chemically pressure treated etc complete all as specified and as directed

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail,paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as directed and specified by Engineer-in-Charge.

S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube etc complete complete all as specified and as directed.

S&F in repair 18/19 mm thick prelaminated particle board interior grade, prelaminated one side with decorative choice lamination and other side balancing white, fixed with screws to timber frame work including teak wood lipping of exposed edges of and including polishing on it complete as in Cupboard and bed room shutters or in any type complete all as directed.

S&F aluminum anodized barrel tower bolts of extruded section & fixed 150 mm long etc complete all as specified and as directed

S&F aluminum handles cast type anodized 150 mm size etc complete all as specified and as directed

S&F but hinges extruded aluminium alloy with galvanised mild steel hing pin, anodised and fixed, type C-21 100 mm size in toilet for PVC doors etc complete all as specified and as directed.

S&F aluminum anodized barrel tower bolts of extruded section & fixed 200 mm long etc complete all as specified and as directed

S &F 300 mm long aluminium alloy anodised sliding door bolts with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and as directed

S & F Powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

M&L for aluminium powder coated glazed door shutter ( Single leaf ) fabricated out of approved powder coated aluminium sections , shutter having bottom rail of section size 114.50 mm x 44.50 mm x2.0 mm thick section, middle and top rail of section 84.50 mm x 44.50 x 2 mm thick section and styles of section size 84.50 mm x 44.50 mm x 2 mm thick and including providing powder coated aluminium frame of section size 47.62 mm x 44.45 x 1.2 mm and S & F 5.5 mm thick tinted glass in panel of shutter fixed with glazing clips , rubber gasket and powder coated aluminium snap beading so as to make air tight and including S & F powder coated butt hinges type C-1 ,100 mm size 3 nos per shutter , powder coated aluminium handle of 150mm size 2 Nos (One on each side of shutter) , powder coated aluminium tower bolt of size 200 mm ( 2 Nos ) per shutter , mortise lock , brass body ,6 levers ( 1 No) with duplicate keys , aluminium (extruded section) hydraulic door closer regulated designation No-3 Universal type ( 1 No) & Floor door stopper ( 140 mm ) overall ,aluminium body 1 No on each shtter etc complete all as specified and as directed. Note: (i) Cost of all fittings & fixture shall deemed to be included in unit quoted rate by the tenderer.

M&L for preparation of new/old untreated surface and applying two coat synthetic enamel paint over one coat of pink primer on new wooden surface of any description not otherwise described over 10 cm width or girth etc complete all as specified and as directed

S&F, in repair galvanized mild steel wire cloth 0.63 mm nominal dia of wire and avg width of a-pertare 1.40 mm fixed with tinned tacks or galvanized wire staples etc complete all as specified and as directed.

Hacking out old broken glass(any thickness, size, quality or description) from wooden or steel frame surround complete all as specified and as directed

S&F 3 mm thick sheet glass, Ordinary quality and glazing in square n. exc 0.5 Sqm in each pane or glazing with oil glass putty complete all as specified and as directed

S&F 3 mm thick figured glass, Ordinary quality and glazing in square n. exc 0.5 Sqm in each pane or glazing with oil glass putty complete all as specified and as directed

S&F in repair 5.5mm thick tinted glass Ordinary quality and glazing in square n. exc 0.5 Sqm in each pane or glazing with oil glass putty complete all as specified and as directed

Taking up or down existing 15mm bore steel tubing and connections including cleaning for refixing or removal complete all as specified and as directed

Taking up or down existing 20mm bore steel tubing and connections including cleaning for refixing or removal complete all as specified and as directed

Supplying, fixing, jointing and testing 15mm dia bore galvanised iron tubing medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed

Supplying, fixing, jointing and testing 20mm dia bore galvanised iron tubing medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed

Fixing only old 15mm dia bore steel tubing and connections in new or old position fixed to wall, ceiling or laid in floor with new fittings complete all as specified and as directed

Fixing only old 20mm dia bore steel tubing and connections in new or old position fixed to wall, ceiling or laid in floor with new fittings complete all as specified and as directed

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exceeding 10 cm but not exceeding 20 cm girth in brick walls complete all as specified and as directed

S&F in repair 500 ltr capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) ,WHITE , ISI marked , Triple layered construction , hoisted and fixed in position including S&F 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600mm long with fitting etc complete all as specified in SSR Part -I 2009 complete all as specified and as directed.

S & F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe, push tap (excluding flushing cistern, flush pipe and waste pipe) etc complete all as specified and directed . Make : Parryware/CERA/Hindware/Johnson

S&F in repair 1000 ltr capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) ,WHITE , ISI marked , Triple layered construction , hoisted and fixed in position including S&F 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600mm long with fitting etc complete all as specified in SSR Part -I 2009 complete all as specified and as directed.

S &F in repair EWC (Pedestal pattern) including P or S trap and connection to drain or out going pipe and to flusing pipe and including making good to floor to match with adjoining surfaces all as directed and including Taking out existing water closet etc complete .

S&F 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minium weight 210 gms ), complete all as specified and directed

S & F in repair 20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F in repair vitreous china squatting pan “ORISSA” pattern size 58X 44 (CM) star white with P or S trap front or back inlet with integral foot rest (excl flushing cistern & flush pipe) & including connection to trap & to flushing pipe anti syphonage pipe etc complete including making good to floor complete all as specified & as directed.

S&F in repair 10 Ltrs capacity PVC flushing cistern valveles syphonic action type low level, white, with inlet ball valve, float & handle incl brackets & flush pipe complete all as specified and directed.

S & F in repair Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand and waste pipe complete all as specified and as directed .

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm etc complete all as specified and as directed.

S&F in repair 15mm bore cast copper alloy chromium plated angle cock with flange complete all as specified and as directed.

S&F in repair 15mm bore fancy type chromium plated bib cock long body with flange etc complete all as specified and as directed.

S&F 15mm bore Pillar taps, cast copper alloy, with capstan heads,chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed

S&F in repair PVC floor trap outlet dia 75mm with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed.

S & F in repair Grating doom 100mm dia of PTMT (Minimum weight 25gms) with hole/ without hole including fixing with white cement and making good surface complete all as specified and directed.

S & F in repair Grating doom 125mm dia of PTMT (Minimum weight 25gms) with hole/ without hole including fixing with white cement and making good surface complete all as specified and directed.

S & F CP Towel rail, 20mm dia, D type, 60cm long between complete all as specified and directed

S&F in repair 125 mm Brass chromium plated shower rose with or without swivel joints, any size, including fixing of steel pipe or union and fixed all as directed.

S&F in repair Bib taps standard of PTMT 15mm Bore screwed down for high pressure, screwed for Iron Pipe and fixed, complete all as specified and as directed.

Supply and fixing in repair PVC waste pipe with 32 mm bore and 65 cm long with cap complete all as specified and directed.

S&F in repair CP Brass soap dish fixed to wall with cp brass screws etc complete all as specified and as directed by the Engineer-in-Charge.

S&F stainless steel kitchen plate rack overall size 900mm x 900mm make out of 0.80mm thick stainless steel sheet etc complete all as specified and as directed .

S&F in repair stainless steel sink with drainage board 1.00mm thick for kitchen or laboretory with plug, waste pipe, coupling, washers also incl cantilever cast iron brackets connecting union etc, overall size 915x460mm with bowl size 410x330x160mm complete all as specified and as directed.

S&F in repair brass chromium plated health faucet for EWC screwed down to GI tubing/fittings 15mm dia incl 1200mm long stainless steel connection complete all as specified and directed.

S&F in repair cast copper alloy CP Jet spray with 1 mtr flexible tube for EWC screwed down fixed to GI tubing/fittings 15mm dia etc complete all as specified and as directed.

S&F in repair concealed stop cock fancy type CP cast copper alloy screwed down high pressure with crutch or buttor fly handle screwed both ends for iron pipe or for unions and fixed 15mm bore complete all as specified and directed.

Dismantling of wall and ceiling board or insulation boards/slabs/blanckets/any thickness including cover fillets complete all as specified and directed.

S&F for hollow PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement fixing on to wall incuding all necessary fittings/items complete as per specifications and drawing all as specified and directed by Engr-in-Charge.

S&F in repair false ceiling with 4 mm thick gypsum board tiles laminated with white PVC film on face side & metalized polyster film (Aluminium foil) on the back side with all four edges sealed with PVC film of size 600 x 600 mm (595 X 595 mm) fixed with clips & screws including anodised aluminium snap grid frame work for false ceiling of Tee/Angle of weight not less than 300 gm per RM with slot for fixing including necessary suspender of flat iron or 4 mm dia bars of required length fixed in purlin of roof not exceeding 1.20 m both ways including all accessories required for suspending ceiling work and gypsum board complete all as specified and as directed by the Engineer-in-Charge.

M&L for repairing of RCC projection,chajja, facia, column etc by necessary preparation (i.e scraping,cutting, chiseling, dustimg and cleaning exposed reinforcement surface of damaged/loose surface and applying one coat of cement slurry and nitobond chemical as per manufacturer instruction and filling the surface with plain cement concrete (1:1.5:3)reinforced with welded mesh and make good bt 15 mm thick plaster with CM (1:4) and including scaffolding/formwork etc upto double storey height complete all as specified and directed by engineeer in charge

S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 75mm inetrnal bore etc complete including taking out old unserviceable pipe all as specified and direcetd .

S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls , 110 mm inetrnal bore , etc complete including taking out old unserviceable pipe all as specified and direcetd .

S&F PVC (SWR) bends any radius 110 mm bore etc complete and as direcetd.

S&F PVC (SWR) bends any radius 75 mm bore etc complete and as direcetd.

S&F PVC (SWR) Branch pieces, single (equal or un equal), ordinary or inverted (spigot or socket type) or with parallel branches 75 mm bore of pipe etc complete all as specified and directed .

S&F PVC (SWR) Branch pieces, single (equal or un equal), ordinary or inverted (spigot or socket type) or with parallel branches 110 mm bore of pipe etc complete all as specified and directed .

S&F in repair 25 mm dia stainless steel curtain rod with stainless steel brackets and knobs at both end as per sample approved by Engineer-in-charge.

N K ENTERPRISES (BID ID -3267191)

M/S M S Constructions (BID ID -3267130)

M/S RAJ KUMAR SINGH (BID ID -3267440)

DEVENDRA ENTERPRISES (BID ID -3267547)

M/s Pratham Enterprises (BID ID -3257457)